Looking for a Framemaker experienced operator

Printing firm based in Rome, Italy urgently looking for peoples able to work on aeronautical documentation using Framemaker 9 for a new compelx project.
contact [email protected] - +39-06-71056.203

hi,
INSERT INTO T1
  SELECT owner,
         table_name,
         CASE
           WHEN REGEXP_LIKE ( table_name, 'QH$') THEN 13
           WHEN REGEXP_LIKE ( table_name, 'HH$') THEN 13
           WHEN REGEXP_LIKE ( table_name, 'H$') THEN 13
           WHEN REGEXP_LIKE ( table_name, 'D$') THEN 36
           WHEN REGEXP_LIKE ( table_name, 'M$') THEN 60
           ELSE 1
         END
    FROM all_tables
   WHERE table_name like 'FACT_1_%' or  table_name like 'FACT_2_%';or
INSERT INTO T1
  SELECT owner,
         table_name,
         CASE
           WHEN REGEXP_LIKE ( table_name, 'QH$') THEN 13
           WHEN REGEXP_LIKE ( table_name, 'HH$') THEN 13
           WHEN REGEXP_LIKE ( table_name, 'H$') THEN 13
           WHEN REGEXP_LIKE ( table_name, 'D$') THEN 36
           WHEN REGEXP_LIKE ( table_name, 'M$') THEN 60
           ELSE 1
         END
    FROM all_tables
   WHERE REGEXP_LIKE(table_name,'^FACT_[1-2]_');G.
Edited by: Ganesh Srivatsav on Mar 17, 2011 10:56 AM

Similar Messages

  • Looking for clear explanation modulo operator

    Hi, can someone please explain to me (a person with no mathematical background) the modulo operator. I need to understand it, because I'm learning  PHP at the moment.  Thanks!!!

    pziecina wrote:
     The modulo operator can be considered a 'the remainder of' operator, e.g. It you have 3/2 then the answer is 1 with 1 left over. The 1 left over is the result you would get using modulo.
    Correct, but just to clarify. The modulo operator is %.
    In the example given, 3 / 2 produces a result of 1.5, 3 % 2 produces a result of 1.
    One of the most common uses of the modulo operator is to determine whether a number is odd or even. Doing modulo division by 2 always produces 1 or 0. If the result is 0, the number is even. Otherwise, it's odd. For example, 27 % 2 produces a remainder of 1, so it's odd; 28 % 2 produces a remainder of 0, so it's even.
    What use is that? A simple use is to change the background colour of alternate rows when displaying the results of a database query.

  • Looking for a real mentor

    I am new to the programming world in general and I have been getting used to the programming mindset and reading like a med student while practicing in Xcode.
    I am looking for a local, experienced Mac developer with patience to instruct and also "look over my shoulder" while I code my first apps. Mainly I need someone to tell me "there is an easier or better way to do that" or "you idiot" or "read this chapter" or something along those lines. I am brand new to programming, but have a high aptitude for learning and retaining. I have many questions and need some one on one instruction since there are not really any classes that are cost effective nearby. Consider it propagating the species or something cool like that.
    In return, I know many projects that need experienced contract developers .
    I am in the Fort Lauderdale area.
    I also know of many people in the area that are interested in the same so maybe we can get a class together and you can charge them for the classes...Just a thought.
    Thanks in advance.

    Hi Murray,
    There were a couple of reply's. I could not make either one work. I tried contacting you several times. The answer you gave me does not work. It is probably piIot error.  would like to talk to you about it. Can I call you? If so, send me your telephone number and I will call.
    Thanks for the followup.
    Jim

  • Just purchased D7000, Looking for advice MacBook Pro or Win 7 64bit

    I just purchased a D7000 and I'm looking to upgrade my PC for photo work with Lightroom and Photoshop CS5. Looking for feedback from experienced users. What is better, MacBook Pro or Win 7 64 bit?

    Its hard to get reliable information about which platform Lightroom is most likely to work best on, since Adobe would say "works equally well on both", and most individuals have personal biases that cloud objectivity (plus, the users just dont have enough data points to make a curve, so to speak).
    I've used Lightroom on both platforms, but can't tell which is best, except:
    The Windows version supports hotkeys for menu accesses, which makes plugin use far more convenient (Mac version does not). Also, some (not many) plugin functions just dont work on the Mac because of it.
    Also (I'm a plugin author) there are some inefficiencies in the Windows implementation of the plugin infrastructure that make me wonder if the Lightroom software has a Mac bias under the hood - but I dont know. On the other hand, there are some anomalies in the Mac implementation of the plugin infrastructure that make it hard to program plugins to work as well - for example, edited text fields are not commited before a button click is processed, so having buttons that do things with freshly entered text can be a challenge - there are some workarounds but not always viable, and a plugin author must know about it, remember it, code for it, and test for it... And, Mac users need to be aware that they may need to tab out of a text field before clicking a button that processes the text...
    Anyway, in the grandest scheme of things, I think the differences are relatively minor, and the bigger question is: Which platform do you want to use for "other" things besides Lightroom.
    PS - There may be slightly more potential for problems on the Windows platform because of the larger variety of hardware and drivers which could have funny interactions, but these are the corner cases...
    Lightroom works great on my Mac, and on my Windows machine (much better on new machine than older), but Aperture hardly works at all on my (relatively new) Mac (sloooooooow), yet others dont have same problem... - go figure...
    Cheers,
    Rob

  • My operating system is OS X Yosemite 10.10.2  Suddenly one (only) of my email accounts is not pulling in new emails.  I ran the Connection Doctor which indicated all connections are ok.  I am looking for another way to troubleshoot or a solution.

    My operating system is OS X Yosemite 10.10.2  Suddenly one (only) of my email accounts is not pulling in new emails.  I ran the Connection Doctor which indicated all connections are ok.  I am looking for another way to troubleshoot or a solution.

    Mail troubleshooting - Yosemite
    Mail (Yosemite): If you can’t receive messages
    Troubleshooting sending and receiving email messages

  • Looking For Experienced Programmer

    Hello,
    I am looking for an experienced Java programmer to discuss the possibility of interfacing with an existing SQL database. I would like to know if what i would like to do is possible, and then would like to contract this work for development.
    Any help would be greatly appreciated. I am located in Walnut Creek, CA
    Zack
    [email protected]
    Message was edited by:
    Z_Rob

    I am looking to meet to determine if what we want to
    do is possible. If yes, then i would expect a bid on
    the project.I doubt if this is going to work because we live > 5,000 miles appart!

  • Looking for experienced LBP2 players

    Add me on PSN: fly8fly
    Looking for good creators or just experienced and has a keyboard

    I am but i am looking for people 2 plz look at my posts

  • Looking for experienced iWeb 09 developer to help me in dev. my ecomm site.

    Greetings,
    I am looking to get my site up and running using nothing but iWeb to conduct e-commerce transaction, shopping cart, course schedules etc. This site is not too difficult with about 5-7 pages but I would like to get someone to do this for me to get started and then show me how to maintain it going forward. I currently have a site which was done in a matter of a couple hours to get it started but I am looking to finalize this in the next few months.
    Currently all of my account information is on yahoo (email, hosting, domain etc) and would like to keep this and map.redirect it to my .mac account.
    Obviously looking for the lowest bidder so please let me know your rates.
    Please let me know if anyone is interested in this and you can feel free to contact me at [email protected]
    Appreciate it,
    Mike

    This would be so easy to do yourself and this is exactly what iWeb was designed for - ease of use for novices to get a web site up and running in a short amount of time.
    If you want to get it finalised in 3 months time, then I would suggest that rather that paying someone to do it for you that you could be learning how to do it yourself.
    Also, I see that you have Yahoo hosting and want to publish a commercial site to MobileMe. Do not do this. If you create a site with a shopping cart etc. which it is possible to do with iWeb, then upload directly to your Yahoo hosting account - iWeb is not meant for sites like these and the loading time is not good - Yahoo would be better.

  • Looking for a nice solution for different cases with nearly same operations

    Hi everybody:
    I'm looking for a nice solution for the following problem:
    I'm measuring different data at the same time (with different devices).
    I would like to save these data all in one array (or cluster?), but I
    don't know exactly the way to do this. All values have corresponding
    time values. So for one data type it would result in a 2d array,
    wouldn't it? But how can I save different data types with their time
    values in one array? Or should I take a cluster? And how can I get only
    a certain type of data out of this array or cluster again? E.g. if I
    only need data type "3" with its time stamps for evaluation? I would
    really appreciate an example, I work with LV 7. Thanks!
    Then - for evaluation - I only need one data type of these different
    data. Which one I would like to choose via the frontpanel (it changes
    from test to test). So, I thought of a case structure (where I can
    choose which data type and correspondingly which evaluation way). The
    evaluation steps for the different data types are quite the same, but
    can vary in order of execution. I could write for every case the
    (nearly) same evaluation steps, but this would take a lot of time, plus
    if I need to change one step I need to change it in every case.
    Does anybody know a better way?
    Thank you very much in advance,
    Steffi

    steffi.kono wrote:
    In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
    Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
    steffi.kono wrote:
    And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
    There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
    To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
    LabVIEW Champion . Do more with less code and in less time .

  • Experienced Professional Looking for LabVIEW Job offer anywhere in USA

    Hi,
    I am Sreekanth Komatineni from Virginia looking for some job offer. Here is my brief experience.
    Here is my Skillset.  
    Skills: LabVIEW, VB, VC++, C/C++, and Java with good customer interaction.
    Experience Summary:
    Over 7 years of Industry experience with 4yrs purely on LabVIEW in design and development of customized PC based Embedded Applications, Industrial automations, Data acquisition and Control Systems using LABVIEW 7.1/8.0/8.2/8.5 and NI DAQ Cards in the defense, manufacturing and telecommunication industries.
    Experience with PMD USB Interface cards, GPIB Interface, VISA and Serial I/O Interface, Code Interface Nodes, Call Library Function nodes to interface with third party and custom Dlls, Multi-channel Data acquisition, Software Triggering, Analysis of acquired data with mathematical algorithms, Controlling and Monitoring applications, MODBUS and ASCII, I2C, UART communication programming on PC side, good at PC based Automations.
    Willing to relocate anywhere in USA.
    Thanks and Regards
    Sreekanth. Komatineni
    [email protected]

    Hi Harold,
    Please see my email to you & proceed accordingly.
    Good luck!
    - Partha
    LabVIEW - Wires that catch bugs!

  • Im looking for a message forwarding solution operating after sender specific rules

    Hi - Im looking for a message forwarding app or solution somehow, that automatically will forward my messages (emails, texts, IM etc)  to my different apps, devices
    and mailboxes - depending on who the sender is. Any ideas ? 

    Hi,
    From your description, this issue only occurs to one sender, messages from others can be forwarded normally. In your case, I recommend you verify if the message is set to "Do Not Forward" when this sender sends it.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Experienced LabVIEW Engineer looks for part time projects

    Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
    Looks for smaller part time projects (that can be performed at distance).

    Hi,
    I have 6 years of experiences in labview application.I would like to develop the code through the internet.
    Kindly let me know if the openings still available. 

  • What to look for in Execution plans ?

    Hi Pals,
    Assuming the query execution is slow , I have collected the xml plan. What should I look for in the actual execution plan . What are the top 10 things I need to watch out for?
    I know this is a broad and generic question but I am looking for anyone who is experienced in query tuning to answer this question.
    Thanks in Advance.

    Reading execution plans is a bit of an art. But a couple of things:
    1) Download and install SQL Sentry Plan Explorer (www.sqlsentry.net). This is a free tool that in msny cases gives a better experience to look at execution plans, particularly big and ugly ones.
    2) I usually look for the thickest arrows, as thickness indicates the number of rows being processed.
    3) Look for deviations between estimates and actual values, as these deviations are often the source for bad performance. In Plan Explorer, you can quickly flip between the too. In SSMS you need to look at the popup for every operator. (But again, it is
    the operator with fat arrows that are of most interest - and those before them.
    4) The way to read the plan is that the left-most operator asks the operators it is connected to for data. The net effect is that data flows from right to left, and the right-hand side if often more interesting.
    5) Don't pay much attention to the percentages about operator cost. These percentages are estimates only,
    not actual values. They are only reliable if the estimates are correct all the way through - and when you have a bad plan that is rarely the case.
    This was the overall advice. Then there is more specific one: are indexes being used when expected? Note that scans are necessarily not bad. Sometimes your problem is that you have a loop join + index seek, when you should have had two scans and a hash join.
    Try to get a grip of how you would process the query, if you had to do it manually. Does the plan match that idea?
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Looking for MSI FX5900 TD128 BIOS !! Need to flash back from 5950

    I had flashed my BIOS a couple of months back using the WFFLash utility of Leadtek and since then ive been gettin low scores on 3dmark03!
    Overclocking my 5900 once get me to get a 6300 3dmark03 score and now it doesnt go over 5800 or even less!!
    I was hoping if some1 could either give me a link or if some1 had the BIOS of the GPU i own, it was be grateful!!
    Even has any1 else encountered this low scores after their Flash!
    Oh yeah which utility do i need to re-flash - WFFLASH or NvFlash!
    Hope to find some help here ! !
    THanksss !!  

    Utk,
    The BIOS is static and flashing back probably won't make things better. I believe your scores or performance is suffering from OS decay. It might be a good idea to review all the software you have installed since you flashed your BIOS and see what's running in the backround. Perhaps even a fresh install of the drivers, maybe even a fresh install of the OS.
    Read this link, it saves me the time of going into detail http://www.computerclub.org/tips_tricks/tip_performance2.htm
    Quote
    Looking for performance degradation
    Before I move on, let me point out that there's another area where benchmarking software really shines for computer users and that is in keeping an eye out for performance degradation due to OS (Operating System) Decay.
    This type of problem is little understood but very common. Let's take a closer look. As you've been using your existing operating system over time, you've probably installed, upgraded, and uninstalled numerous applications. In addition, you've probably added and removed lots of hardware and device drivers. Furthermore, you may have upgraded your operating system with a multitude of patches, bug fixes, and updates.
    Considering all the wear and tear these types of operations put on your operating system, chances are good that you've experienced OS decay first hand. Some of the symptoms of OS decay are frequent system lockups or crashes, strange error messages, unusually slow performance, and Windows directory that's bloated with files.
    Of course you must realize that OS decay is actually a natural occurrence that results from the heavy use of your system. You could look at the OS decay problem much as you would look at an aging automobile—no matter how well you take care of it, eventually you're going to have to buy a new one.
    Fortunately, you don't have to buy a new computer to solve the OS decay problem; you just have to rebuild the operating system from scratch.
    As such, the question is not if you must rebuild, but when you must rebuild. If you regularly check your computer and keep tabs on your system's progress over time, you'll have a much better picture of when the OS decay has gotten so bad that it's degrading the overall performance of your system.

  • Looking for ideas for a university "project"

    Hi folks!
    I'm currently studying Java (optional subject) at university and we have to write a program for evaluation. The problem is... which program should i go for? I've thought in a little game ( it can't be a chess game, as it is what the teacher has given us as example)... What do you think? Any suggestions?
    What about a simple filemanager? don't really know because it has to be multiplatform... Well, i'm counting on you guys!
    Thanks in advance!

    skottish wrote:There are some standards which nearly everyone learns in OOP/OOD classes. For instance, employee databases and multimedia collections are popular choices. They're not too involved, but will let you not only use OOP/OOD principles, but it will also give you time to build a GUI, which also requires the same principles.
    Now as you mention it...
    At the moment, the whole class has to do some 'mini-projects', including rudimentiary documentation. The favourite topics are management of either employees or goods, or projects similar to it. A friend of mine (a very talented webdesigner, from my point of view) started to program a media collection application. So it seems to be typical, what we are approaching.
    It is true, that these applications are very good to start off, but the applications itself could also be realised in form of a script, as they do not necessarily require self-defined classes and their instances to be used. I tried to advance further (as my interest in programming goes somewhat beyond what we learn in school, with 1 (!) lesson per week) and started to play around with properties and inheritance. Very interesting techniques and I slowly come to understand, what OOP is all about and it's really fascinating to go deeper and deeper into the issue and to understand the fundamental things, not just the surface we're taught at school.
    It may sound childish to a experienced programmer, but actually, 2 years ago, I was not a bit into programming. I started up Microsoft Visual Studio .net and forced myself to play around a bit with programming. I soon came to the result, that this is actually extremely fascinating. Due to my own laziness, I never to got to advance to a level I actually wanted to achieve, but I think this is slowly changing, mostly due to the fact, that I've become interested in all of this open source thing. It's not only about using F|OSS for everyday work, it's more the will to be a lively member of the community, which is able to share some of its knowledge in order to improve the whole project. So, if I ever manage to go beyond the barrier of my own laziness, I have some (from my point of view) intesting projects to start and am very much looking forward to participating.
    To return to your initial question: How much time and experience do you have? As a beginner, I try to understand your situation as I am actually in the same one and had to do a project for school for myself. If you have more time at your disposal, you could try out some advanced stuff, like not merely employee management, but a simplified company management software or things like that, you could even program a operating system 'control center', with a rather limited approach, but it is indeed an interesting idea, which I also have in mind as the biggest project yet to come. If you can emphasize on ArchLinux, you could sit down and try to program a GUI control module for some service, the operating system is offering. Look out for appealing GUI frameworks (GTK or Qt) and their Java bindings. I wish you good luck.

Maybe you are looking for

  • Troubles with fonts, graphics in firefox

    I just rebooted my machine. I was trying to test a manually written grub.cfg with grub2. I screwed this up. Initially, I managed to get to a rescue shell by editing the kernel command line. I'm not sure what the correct term is - not the grub2 shell

  • On boot camp and windows 7 cannot use dimmability keys on wireless apple keyboard.

    Hello, I am using boot camp under windows 7 on my mac book air. However the dimability keys and sounds keys cannot be used with my wireless keyboard. Do you know how to fix this ? Many thanks

  • Alert with IDOC error message

    Hi All We are configuring IDOC monitoring process in BPIM of Solution Manager. One of our requirement is Alert mail should include IDOC number and error message. Example IDOC Number: 8358000 Status: 51 Message:  Payment term not found Could you pleas

  • I can't export anymore pages file to pdf

    When I try to export pages file in pdf format (ever done without problems till few hours ago!) there is an alert advising me that files name having more than 31 characters can't be saved in the destination volume. But although I cut the lenght of the

  • How do i get pdf through the email app on an iphone?

    A customer of mine was griping that he can't get a pdf file to open on his iphone. so i sent him image files to try. All files are small of course. I thought he was just a whiner, but i tested it, and I also cannot get pdf files or jpeg files to mail