Looking for a programmatic/command line approach to auditing registry changes

http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/regedit_audit_key.mspx?mfr=true
I'm looking to enable auditing on registry keys, but not have the user have to manually go through this process. Can you do this via command line or something? I'm trying to write this into my program, and I need it to set auditing on certain registry keys.

Hi,
In addition, we might enable the following audit group policy settings to audit registry changes:
Global Object Access Auditing
Under computer configuration/ Windows Settings/Security Settings/Advanced Audit Policy Configuration/
For more information regarding Global Object Access Auditing, please see:
Registry (Global Object Access Auditing)
Global Object Access Auditing is Magic
Best regards
Michael Shao
TechNet Community Support

Similar Messages

  • Looking for the parameter/command line to supply the license key during the installation of Adobe Captive CS6 application.

    Hello - We are performing customize installation for Captive CS6 with the help of AAMEE tool. We have couple of licenses which we wish to supply over the installation command line during deployment. However we did not find any parameter or the command line which will allow us to enter the license key during installation.  Has any one succeed in finding the command line where we can pass the license key during installation of this application?
    Thanks.

    Can you post the last bit of your log file?  100 or so lines should be plenty to see what's going wrong.

  • How to locate 'look for apple tv' command in iTunes

    i am trying to connect first generation apple tv to mac mini.
    following all instructions but apple tv does not appear in itunes devices list.
    cannot find how to configure itunes for 'look for apple tv' command.

    That depends on how you set it all up. If you chose the "connect to iTunes" option then you should be able to sync content to the hard drive on the Apple TV. If you chose the "add shared library" option then you can only stream to the Apple TV.

  • I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
    So, the options are to upgrade to a newer OS X or use Firefox or  Chrome.
    Be aware, Apple no longer support Snow Leopard v10.6 >  www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
    See if your Mac can run v10.9 Mavericks >  OS X Mavericks: System Requirements
    If so, you can download and install Mavericks for free from the App Store.
    Read prior to upgrading >   Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

  • HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible?  It does not have the option for software update.

    i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible?  It does not have the option for software update.

    Identify Your iPad
    http://www.ifixit.com/Info/ID-your-iPad
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line ?

    How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line, on windows ?
    firefoxe... -option? <addon name>?....?

    Does opening this page help: <b>about:addons</b>
    *https://developer.mozilla.org/en/Command_Line_Options

  • -info XML format for Compressor's command line interface?

    Hi Everyone,
    I've got a brand new copy of Final Cut Studio HD that I'm using for an encoding project. I'm trying to figure out how to use Compressor's command line interface. I want to give it a MPEG-2 file and a .scc (closed caption) file. I can see how to specify the source file, but I'm having trouble figuring out how to specify the SCC file. As best as I can understand, I'm going to need to use the -info <XML> option, but I haven't found any documentation for this. Can someone point me to the appropriate documentation?
    Thanks!
    - Kevin

    I get an error when I do exactly what you suggested. My problem is not if the XSU is able to locate the xml file because I know it is able to parse it since it picks up an error in it such as if I make the "ROW" element "row" - ie small caps instead of big which is not recognised by XSU. I use the url of the xml file as specified when I open the xml file in internet explorer. The XSU does confirm it inserts the document successfully with my original command but the document simply doesn't get inserted into the table. Specifically, if anyone is to insert the xml file I have shown in Oracle, how would it be approached successfully?
    Your help is very much appreciated.

  • Looking for old Missile Command-type game

    I used to play this Missile Command clone around 10 years ago, I remember a black background and colorful bases and "missile lines". Can't remember what it was called though. If anyone knows that would be awesome.

    d. t.
    Are you looking for online play? I did a Google search for Missile Command and came up with a bunch of online Missile Command games. I was able to save a java based version as a web archive with Safari and play offline.
    I have the old Missile Command in black and white, but I got it in the OS 7 days so I don't remember where I got it.
    Shane
    1.6 ghz g5, G4 500 PDQ(Wallstreet), TiBook 867    

  • How to create an alias for a custom command line with paramters

    Is it possible to create an icon that runs a terminal command line ?
    What i want to do is start firefox with a specific profile. In terminal this is done by using Firefox -P [profileName]
    How can I put this in an alias (or something else) ?
    I tried creating an alias that changing the original but it won't let me insert a command line.
    Any help ?

    In my .profile this works: alias f="/Applications/Firefox.app/Contents/MacOS/firefox -P doug"
    for starting under my profile. Make sure you run source ~/.profile if you add an alias to .profile
    Starting default FFox profile is /Applications/Firefox.app/Contents/MacOS/firefox -P swxazqvy.default
    And for Desktop icon to start whichever profile, open Script Editor and paste with proper changes(and save as an app(maybe to Desktop again?) :
    do shell script "/Applications/Firefox.app/Contents/MacOS/firefox -P doug"
    And you can make an executable with icon in a bash script with above and chmod u+x it and save to Desktop too.
    Message was edited by: doug pennington

  • Using a variable for a whole command line

    Hi,
    Is it possible to put that commandline:
    Execute-MSI -Action Install -Path "$Var_SourceFiles\$($Itemvar_Setup_Parameter[0])" -transform $Itemvar_Setup_Parameter[1] `
    -Parameters $Itemvar_Setup_Parameter[2]`
    -LogName "$var_PackageLongName"
    in a single variable and then just run the variable instead of writing the whole command line?
    Thanks,

    You can put in a script file and call the script.
    .\myscript.ps1
    You canput it in a variable like this:
    $sb=[scriptblock]::Create('Execute-MSI -Action Install -Path $Var_SourceFiles\$Itemvar_Setup_Parameter[0] -transform $Itemvar_Setup_Parameter[1] -Parameters $Itemvar_Setup_Parameter[2] -LogName $var_PackageLongName')
    $sb.Invoke()
    You cannot pu tit in a variable and run it except.
    Your command also leaves a lot to be desired in a PowerShell session.
    ¯\_(ツ)_/¯

  • Different parameters for different sheets- Command Line Script

    Hi,
    I am using command line script to run my discoverer report.
    I have 5 sheets in the workbook out of which, 2 has a PeriodID parameter, and the other 3 sheets does not have parameters.
    Is it possible to execute this scenario.
    This is the script i use:
    string8 = "C:\oracle\BIToolsHome_1\bin\dis51usr.exe /connect uname/pwd@instance /apps_gwyuid APPLSYSPUB/PUB /apps_fndnam APPS /apps_user /apps_responsibility Resp_Name /opendb workbook /sheet sheet1 /sheet sheet2 /sheet sheet3 /parameter PeriodID 2008004 /sheet sheet4 /parameter PeriodID 2008004 /sheet sheet5 /export XLS file_name /batch"
    Your inputs are highly appreciated.
    Thanks.

    Hi
    No, you cannot do this. You have to supply the parameters to each worksheet separately, even though different worksheets may use the same parameter(s).
    Best wishes
    Michael

  • [SOLVED] Looking for a terminal command or key binding to exit Openbox

    I've searched the forums and googled, but I haven't been able to find the answer.  I'm sure I've missed it somewhere...
    I start my openbox session with 'startx' from the command line. I would like a terminal command or a key-binding to be able to exit openbox and return to the command line. I just don't like using the menu with my notebooks touchpad.  I just can't seem to figure out what command is used. The menu.xml file lists the command as "Exit", but typing that in a terminal just exits the terminal.
    Any help appreciated.
    Last edited by badfrog88 (2010-09-05 19:08:43)

    gorky wrote:ctrl-alt-backspace won't do the job?
    IIRC, it's disabled by default in xorg-server 1.7 and newer.
    @ badfrog88
    Ctrl + C will kill (almost) any running app you point it to.
    Last edited by karol (2010-09-05 19:17:29)

  • How can i share my library with my new computer when the itunes on the new computer does not have the "look for shared libraries" command in the preferences/shared pane?

    It worked fine before i updated the most recent update, My old computer readds the new one but the new one does not read the old one now.

    Is the iTunes library actually shared on the old computer?
    I have never had a need for forcing iTunes to look for shared libraries, it simply detects them.

  • Looking to run unix command line from Finder

    I want to run a unix command directly from finder. Kind of like using command-G to "Go To Folder".
    If a current method isn't supported, I noticed that Terminal.app has a shortcut for "New Command" using command-N. What would be the right way to create a keyboard shortcut in Finder that would call Terminal->New Command?
    Thanks

    You might use a third-party macro expansion utility that permits creating keyboard macro shortcuts. Examples include QuicKey or iKey. There are also several text expansion utilities that also allow attaching keyboard shortcuts such as TextExpander or Typinator. The above can be found at VersionTracker or MacUpdate.
    You can also create an AppleScript using the Do Shell Script command. The resulting compiled script can be attached to an Automator action. I don't know if you can attach a keyboard shortcut but you can add an Automator action to the Services menu and to the Finder's contextual menu.

  • Looking for a special land line phone system

    Hello to all,
    Is there a phone system available where a wireless component plugs into a phone jack and transmits the signal to a full base phone?
    This sounds confusing but here's the situation. My mom has an apartment in an assisted living residence.
    The land line phone jack is on a wall across the room where she normally sits.
    I could buy a 30 foot line and run it across the floor to bring the phone base to her, but I was hoping that this type of phone system exists. I wanted to eliminate running a long phone line.
    Has anyone heard or seen this? Thanks in advance for your help.

    Do you mean something like  THIS  ?
    ====================================================================================
    Error exists between keyboard and chair.

Maybe you are looking for