Looking for a way to view all changes made with subversion [image]

Hi guys,
My upfront apologizes if this is not the right forum... I'm using a subversion with eclipse and wonder if there is a better way to VIEW all changes made to my code. Right now, if I wish to know of a change I need to "compare with" and choose a version - this gives me only one file and it's really hard to go through 10+ files.
Question: is there a better way to do that? meaning a webpage I can refer to and see all code that was changed/added/deleted? (the idea is to look at it at the end of the day and see all changes)
something that can provide a snapshot like this image.
The picture above is from Trac but I found it SOO hard to install. Wonder if there's a way just to view changes.
Thanks for any pointers

You mean viewing all changes over a codebase, as opposed to a single file?
I do that like this on the command line:
svn diff -r1234:1244 path | vi -(where the numbers are whatever revision numbers I want to compare, and "path" is a path under source control)
I'll bet you can configure Subversion to take a diff tool that you specify.
If you want to do this under Eclipse specifically... then you probably want to check with an Eclipse forum somewhere. Eclipse is not a Sun/Oracle product, so it's not here. Try eclipse.org, probably.

Similar Messages

How to remove all changes made to an image in Camera Raw -

In CS4 with latest ver. of Camera Raw, I think there is a way to remove all changes previously made to an image while using Camera Raw.
In other words after doing this the little icon in the upper right hand corner of an image in Bridge that indicates changes have been applied to an image, should be gone. Another way of asking this would be to say, how can I start all over again with the original image in Camera Raw by removing all changes prefiously made to it in Camera Raw?
TIA

Sorry, I don't know the answer to that for sure*. As a certified old geezer who avoids cluttering his mind with stuff that can easily be looked up in a menu, I stay away from keyboard shortcuts as much as I can, using only those applicable system wide, the most obvious ones in Photoshop like deselect, etc.
* However, since no such shortcut appears next to the menu command, I doubt there is one.
You could create an action and assign it a key command, though. Doh!
Never mind. That was a total brain short circuit. You can't create actions in Bridge. You'll need a script. Ask in the Bridge Scripting forum.
Message was edited by: Ramón G Castañeda

Looking for best way to convert 35 mm slides to digital images

Hello Apple Community,
Am researching best ways to convert several hundred 35 mm slides into digital images. There are numerous scanners/converters out there but want to ensure I get the best unit compatable with my iMac (27 inch, Late 2009). Any suggestions welcome.

For scanning 35mm slides you need a scanner with a good photometric resolution and geometric resolution.
For the photometric resolution: Get a scanner with a high density range (D-max) value, to get a good resolution of highlights and shadows.
For the geometric resolution - sharpness and detail - try to get at least 3200 dp,i to be able to get good 8"x10" prints from your scanned slides, a higher dpi value, if you want to be able to print larger images.

Looking for a way to "deselect all" and "hold page" for bsp tableview

Hallo Experts,
I'm quite new to bsp programming. My first application is nearly complete, but I'd like to add some more convenience. I got two issues to solve, both connected with the tableview element.
1) User is clicking through the pages of the table control, marks some lines and hits submit button. After the submit, the table is back to page 1. Is there a way to keep the page that was last viewed?
2) Same situation. After the user has hit the submit button, I retrieve a list of all marked table lines. After I'm done, I'd like all lines to be unmarked. Does anyone know how to achieve that?
Any help or hints are highly appreciated.
Christian

Hi Chris,
1)User is clicking through the pages of the table control, marks some lines and hits submit button. After the submit, the table is back to page 1. Is there a way to keep the page that was last viewed?
declare a global variable gv_visiblefirstrow.
In EventHandler
when 'submit'.
gv_visiblefirstrow = request->get_form_field( 'your_tableview_id_visiblefirstrow' ).
In Layout:
Add the below line to code of your tableview
visibleFirstRow = "<%= gv_visiblefirstrow %>"
2) Same situation. After the user has hit the submit button, I retrieve a list of all marked table lines. After I'm done, I'd like all lines to be unmarked. Does anyone know how to achieve that?
After you are done..just add the code..
Data: lv_total_rows type i.
 describe table itab lines lv_total_rows.
 cl_htmlb_manager=>check_tableview_all_rows(
 rowcount = lv_total_rows
 request = request
 id = 'tableview_id'
 check = ' '
As suggested by Raja,pls search the forum before posting a new thread.
Regards,
Anubhav

I have a vi that produces images sequentially, i'm looking for a way to view these images real time on a remote computer on the LAN

If someone could walk me through the steps and controls it would really help.

You may try to create an picture control on your local computer and use Datasocket to broadcast over LAN. On your remote computer, use another VI with a picture control and use Datasocket to receive the same image.
To create datasocket connection, right click on the front panel picture control, Data Operations>>Data Socket Connection... Create a Publishing DataSocket on local computer and a Subscribing DataSocket on the remote computer. Remember to start the DataSocket Server from the Labview directory.

Looking for a way to add a footer navigation with sub-pages listed underneath parent pages?

The navigation widgets work great for mast navigation and sidebar navigation, but no so good for footer navigation.
Is it possible to display main pages horizontally and have any sub-pages listed underneath? The only option I appear to have is to use the horizontal widget and make do with hover triggered drop downs - not great for footer navigation.
If anyone knows how to do this or can point me in the right direction I'd really appreciate it. I\m just starting out with Muse, think it might make a great wireframing tool.

Hi
You can create a manual menu as footer navigation, where you can add the sub menu items as you want to show up with mouse action.
Helpful link :
http://www.lynda.com/Muse-tutorials/Adding-Menu-widget/123518/131179-4.html
Additionally , you can checkout the menu here :
http://muse.adobe.com/exchange
Thanks,
Sanjit

Looking for a way to export full Popularity Trends data

Greetings!
I'm looking for a way to access all "popularity trends" data for a SharePoint 2013 publishing site in one place. I'm probably missing something pretty basic here, (I hope), but it seems if I pull up popularity trends for the site, all I get is
the hits & unique users for the site as a whole. If I go into my pages library and choose "Most Popular Items," I'm given a search results page that I can't run reports from. And if I select the "popularity trends" link under one of
those search results, I get a usage report for a single, specific page.
I've thought about doing a multi-select of pages from my site's Pages library, but I have more than 100 pages in the site, so I still can't get at everything all at once. Plus, the resulting usage.xlsx file just includes a lot of reports on individual
pages.
There's got to be something more all-encompassing than this...right?
Help!

Hi,
According to your post, my understanding is that you wanted to see the all popularity trends data for a site.
Where did you export the usage report?
Did you export the report from Popularity and Search Reports?
To view the Popularity Trends report for a site collection
Verify that the user account that is performing this procedure is a member of the Owners group.
In the site collection, on the Settings menu, click Site ettings.
On the Site Settings page, in the Site Collection Administration section, click Popularity and Search Reports.
On the View Usage Reports page, in the Usage Reports section, click Usage.
In the message box, click Open to open the report in Excel, or click Save or Save as to save the report.
Click the tabs to view the usage report for the different usage event types.
http://technet.microsoft.com/en-us/library/jj715890(v=office.15).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Hola a todos , busco una manera de crear un pdf desde la impresora de ios, como lo puedo resolver, gracias. Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Try this process on your Mac. These files will be regenerated by Mac OS X with default settings.
1. Quit the Mac App Store
2. Trash the following folders and files; (~ is your Home folder)
~/Library/Caches/com.apple.appstore
~/Library/Caches/com.apple.storeagent
~/Library/Cookies/com.apple.appstore.plist
~/Library/Preferences/com.apple.appstore.plist
~/Library/Preferences/com.apple.storeagent.plist
~/Library/Preferences/com.apple.streagent.plist.lockfile
Mac HD/Library/Preferences/SystemConfiguration/networkinterfaces.plist
3. Restart your Mac
4. Open the Mac App Store
5. Log into your MAS account

Looking for a way to switch views using Javascript

Hi ! I'm currently studying Acrobat 3D. I've got a PDF document with a 3D Annotation, which was imported from a U3D file. I defined 3 views : "initial", "front" and "top". My problem is that I'm looking for a way to switch views using Javascript. In fact, when I list cameras using the following code, I only get one camera called "DefaultView". So my question is : where has my "initial", "front" and "top" views been ? Is there a way I can switch between them using Javascript ? for(i=1;i<scene.cameras.count;++i) { Cam = scene.cameras.getByIndex(i); console.println("camera " + i + " : " + Cam.name); } Thank you very much in advance. françois

Are the dates on these entries correct??!! Doesn't seem like it. Anyway, just in case, here's some code to help:
//=========================================================
backgrounder = new RenderEventHandler();
backgrounder.onEvent = function(event)
runtime.removeEventHandler(this);
canvas = event.canvas;
background = canvas.background;
keyer = new KeyEventHandler();
keyer.onEvent = function(event)
switch (event.characterCode)
case 49:
cam = scene.cameras.getByIndex( 0 );
canvas.setCamera( cam );
break;
case 50:
cam = scene.cameras.getByIndex( 2 );
canvas.setCamera( cam );
break;
case 51:
cam = scene.cameras.getByIndex( 3 );
canvas.setCamera( cam );
break;
runtime.addEventHandler( keyer );
runtime.addEventHandler(backgrounder);
//inform user
console.println("Use the 1,2,3 Keys to toggle between cameras");
//===============================================

TS3152 Im using 10.7.4 and looking for a way to change the streaming port on quicktime x

Im using 10.7.4 and looking for a way to change the streaming port on quicktime x
used to be able to do via system preferences > quick time > advanced
But cant find these settings anymore
Thanks
Pavi

Click on the pull down window next to From: and you should be able to select the individual account you want to send from. The account that you want to send from must be an Enabled account in the Account Preferences of Mail.

My operating system is OS X Yosemite 10.10.2 Suddenly one (only) of my email accounts is not pulling in new emails. I ran the Connection Doctor which indicated all connections are ok. I am looking for another way to troubleshoot or a solution.

My operating system is OS X Yosemite 10.10.2 Suddenly one (only) of my email accounts is not pulling in new emails. I ran the Connection Doctor which indicated all connections are ok. I am looking for another way to troubleshoot or a solution.

Mail troubleshooting - Yosemite
Mail (Yosemite): If you can’t receive messages
Troubleshooting sending and receiving email messages

Looking for a way to change GTK2 colors in xfce

I am looking for a way to edit the colors in the GTK theme I am using in xfce, the way you could in gnome2. Lxappearance allows for this but xfce doesn't read the changes from it when I change it though that.
Can anyone suggest something that works? Preferable without having to edit configs by hand.

It is discussed on the xfce forums but unfortunately that solution requires editing by hand. However it does seem relatively easy to automate. Writing a graphical program for those tasks is something you'd only have to do once.

Looking for automated way to test print PnP printer after install then delete

At times we test 20 to 30 printers in a day. I am looking for automated ways to increase the efficiency of this. I would like to simply have the printer install using PnP print a test page then delete itself after the test page or on removal. Are there any settings that can be changed on the computer to change the PnP process to make this possible. I am currently trying to learn and understand the Plug and play process so that I may find out how to get started. Any ideas would be greatly appreciated.
Thanks
This topic first appeared in the Spiceworks Community

Chris
I spent all day Googling and doing side by side comparisons of my old and new systems.
My display is a Dell U2410. It has several presets, including sRGB and Adobe RGB. I've been using sRGB.
On my OLD system, (Win XP, PsCS2, DwCS4) there seems to be no distinction between color managed and non color managed apps, even on this wide gamut display. I could capture (digital camera) in Adobe RGB, open and edit in PsCS2, save as .psd, convert to CMYK for print, or convert to sRGB for SFW. All images looked identical and they printed and displayed perfectly. I thought this was normal, and seemed logical. This also seems to be the source of my incorrect assumptions. I was trying to get my new machine to behave like my old one.
So I get this new machine (Windows 7, PsCS5, DwCS5) and now (still in sRGB display mode) all color managed apps appear de-saturated. Non color managed apps are OK. If I switch the display to Adobe RGB, color managed apps are OK, but non color managed apps are way too saturated. From my investigation, I believe this is normal behavior on a wide gamut display. I've tried changing the Control Panel > Display > Screen Resolution > Advanced settings > Color Management options, but to no avail. Either I'm missing something, or Windows 7 is doing color management differently.
It seems my only option now is to use Adobe RGB display setting for Ps, etc. and switch to sRGB for Dw and non color managed apps. Or, have 2 separate files for print and web. I've Googled 'til my eyes are numb and still not sure I'm getting this. Any enlightenment would be greatly appreciated.
Finally, I don't see an edit function here, so I can't remove my previous incorrect reply. Moderator, please feel free to do so.
Thanks

Looking for a way to directly choose keyboard layout.

I'm looking for a way to organise separated keyboard keys combinations (or single keys - the best) for every keyboard layout. I want to be able to choose layout directly. One unique key (keys combination) for each layout.
One way may be smth. like setting a key to execute a command:
setxkbmap -layout "us,ru"
and
setxkbmap -layout "ru,us"
For keys setup in OpenBox may be used obkey, for example.
In general it works. But in such a case, when not latin/english layout is the first one, or even single one, in the command's layout list, applications will not react on Ctrl-S, Ctrl-Z and so on. It do not depend on current layout, it depend on the first entry in last sequence to be used in the layouts list.
I'm shure there are some other better ways to implement the idea. Please, give me advise: what a tool, or tool set to study and use?

Stack wrote:
the sad clown wrote:
(just make sure that the changed layout doesn't break your keybind):
setxkbmap -rules xorg -model pc104 -layout us -option
Just change the layout parameters (and any other changes you need) for as many layouts as you want.
Unfortunately, if the single layout, or first in the list layout is not 'us', but my national, GUI applications will stop to react on Ctrl-S, Ctrl-Z and similar things.
Can it be fixed?
Is it that Ctrl-[S,Z] don't work or that they change locations because the keyboard layout has been modified? The first is a problem, the second is to be expected if you are changing the keyboard layout.
Stack wrote:
As I catch, for testing there is no difference between setxkbmap and xorg.conf. Also, there is no way to specify there layout specific switch combinations. In coma separated list of values for XKbOptions there is not binds to corresponding position in layouts list. All the combinations will do the same - cycle between layouts. http://www.xfree86.org/current/XKB-Config2.html#5
Layout itself and layout switching mechanics are too different objects (or classes) in terms of programming. I'm not shure I'll be on a right way, if I'll decide to dive deeply into syntax of '/usr/share/X11/xkb/rules/xorg' and '/usr/share/X11/xkb/symbols/*' (mentioned at https://wiki.archlinux.org/index.php/Co … _xorg.conf ) and hacking of ready to use layouts. If I'm searching for a way to switch them only. Am I right?
My suggestion isn't that you use the XkbOptions switch since this won't work for what you are asking. Instead, I'm recommending you use a little keyboard shortcut utility, xbindkeys and use that to issue the setxkbmap command I mentioned earlier. All you have to do is bind the shortcut to keys that don't change across keyboard layout changes (if you have a number pad, an easy solution is to use a modifier + one of these keys as it won't change). This isn't a toggle like the xorg.conf edit, but can switch to any layout you choose to bind in any order you choose to perform.

Is there a way to view all cameras in the timeline at once without creating a multicam sequence?

Is there a way to view all cameras in the timeline at once without creating a multicam sequence? Is there some kind of window I can open where they will show up? I am scrubbing a timeline and I would like to see all the cameras at once.

The multicam monitor only shows multiple clips at once when they are part of a mutlicam sequence. is there some reason you don't want to use them inside a multicam sequence for previewing?
Here is a possible workaround, if your workflow circumstances will permit it:
Apply a pip preset effect to each clip in the timeline. Use UL, UR, LL, LR presets and up to four video tracks will display at once. If you need to see more than that, you'll need to tweak their position parameters by hand. When you're done previewing them all at once you just need to delete their effects from the Effects Controls panel.
I know it's not that neat or quick, but it will let you see everything at once in the program monitor.

Looking for a way to view all changes made with subversion [image]

Similar Messages

Maybe you are looking for