How to remove all changes made to an image in Camera Raw -

In CS4 with latest ver. of Camera Raw, I think there is a way to remove all changes previously made to an image while using Camera Raw.
In other words after doing this the little icon in the upper right hand corner of an image in Bridge that indicates changes have been applied to an image, should be gone. Another way of asking this would be to say, how can I start all over again with the original image in Camera Raw by removing all changes prefiously made to it in Camera Raw?
TIA

Sorry, I don't know the answer to that for sure*. As a certified old geezer who avoids cluttering his mind with stuff that can easily be looked up in a menu, I stay away from keyboard shortcuts as much as I can, using only those applicable system wide, the most obvious ones in Photoshop like deselect, etc.
* However, since no such shortcut appears next to the menu command, I doubt there is one.
You could create an action and assign it a key command, though. Doh!
Never mind. That was a total brain short circuit. You can't create actions in Bridge. You'll need a script. Ask in the Bridge Scripting forum.
Message was edited by: Ramón G Castañeda

Similar Messages

Looking for a way to view all changes made with subversion [image]

Hi guys,
My upfront apologizes if this is not the right forum... I'm using a subversion with eclipse and wonder if there is a better way to VIEW all changes made to my code. Right now, if I wish to know of a change I need to "compare with" and choose a version - this gives me only one file and it's really hard to go through 10+ files.
Question: is there a better way to do that? meaning a webpage I can refer to and see all code that was changed/added/deleted? (the idea is to look at it at the end of the day and see all changes)
something that can provide a snapshot like this image.
The picture above is from Trac but I found it SOO hard to install. Wonder if there's a way just to view changes.
Thanks for any pointers

You mean viewing all changes over a codebase, as opposed to a single file?
I do that like this on the command line:
svn diff -r1234:1244 path | vi -(where the numbers are whatever revision numbers I want to compare, and "path" is a path under source control)
I'll bet you can configure Subversion to take a diff tool that you specify.
If you want to do this under Eclipse specifically... then you probably want to check with an Eclipse forum somewhere. Eclipse is not a Sun/Oracle product, so it's not here. Try eclipse.org, probably.

How to remove uncommitted changes made in a table through JAG?

Hi,
Is there any possibility to remove the uncommitted row from a Table through JAG.
For Example,
If I Click " AddRow " button in a Table and enters value for all the Attributes in that particular Row and if I click the " Cancel " Button, that newly added uncommitted row should be removed by refreshing the Particular page.
Simillarly , if i update a column in a Row and press cancel button , the uncommitted value of that column should be rollBack to its commited value(ie., to its previous value).
Thanks,

You can generate a Delete? column in the table by setting the Group property Multi-Row Delete Allowed.
Other than that, you can generate it through JAG by using custom generator templates, like described in section 4.7 of the JHeadstart Developer's Guide. You can for example drag and drop the Rollback operation of the Application Module as a button and call it a Cancel button.
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting

Not able to change whre to save images in camera raw

Several times after installing Yosemite and then buying into photoshop CC (because cs6 started acting erratic with Yosemite), when trying to change the location as to where the images are saved, Photoshop just replies "Error. The task cannot be completed" when hitting the "Change saving folder" button. Why??

No one can tell, as you have not given any information. We don't even know if you're on Mac or Windows.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How to remove all transitions?

I used the automate to sequence with default transition. A few dozens of transitions were added to the sequence.
How to remove all the transitions without deleting the sequence and starting from scratch please?
Thanks in advance.

The difference in file size you are seeing is because you are only using motionless stills in your movies. No motion, and no effects. Some codecs allows for file size reduction by writing first and last frame information for a still, regardless of the length in the video sequence. Why the transition increases file size is because the codec actually has to write info for each frame in the length of the transition.
This is not going to be the case with anybody working with actual video clips, or if someone adds motion to their stills. The codec then has to write information for every frame, resulting in a larger file size. For most projects, transitions will not make any significant change in file size.

How to remove all ALV buttons?

Hello all.
Does anyone know how to remove all the ALV buttons?
I now the IT_EXCLUDING option, but is there a different and
faster way?
(I'm using ALV classes).
Thanks!

hii..
All the ALV Toolbar Buttons can be removed in Single Shot.
There is a method in CL_GUI_ALV_GRID->SET_TOOLBAR_VISIBLE.
it is protected method create class that is inheriting from CL_GUI_ALV_GRID.
CALL METHOD ME->set_toolbar_visible
         EXPORTING
           visible = '0'
*        EXCEPTIONS
*          error   = 1
*          others = 2
       IF sy-subrc <> 0.
*       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
Set visible to '0' will disable all the buttons.
Example Program:
*DATA DECALRATIONS
TYPES : BEGIN OF ty_sflight,
       carrid TYPE sflight-carrid,
       connid TYPE sflight-connid,
       Fldate TYPE sflight-fldate,
       price TYPE sflight-price,
       currency TYPE sflight-currency,
END OF ty_sflight.
DATA : IT_SFLIGHT TYPE TABLE OF TY_SFLIGHT,
        WA_SFLIGHT TYPE TY_SFLIGHT.
DATA : IT_FCAT TYPE LVC_T_FCAT ,
        WA_FCAT TYPE LVC_S_FCAT.
data : o_cont type REF TO cl_gui_custom_container ,
        o_grid type REF TO cl_gui_alv_grid.
CLASS LCL_ALV DEFINITION INHERITING FROM CL_GUI_ALV_GRID.
   PUBLIC SECTION.
     METHODS : M1.
   ENDCLASS.
   CLASS LCL_ALV IMPLEMENTATION.
     METHOD M1.
       CALL METHOD ME->set_toolbar_visible
         EXPORTING
           visible = '0'
*        EXCEPTIONS
*          error   = 1
*          others = 2
       IF sy-subrc <> 0.
*       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
     ENDMETHOD.
     ENDCLASS.
   START-OF-SELECTION.
     CALL SCREEN 200.
*&      Module STATUS_0200 OUTPUT
module STATUS_0200 output.
   SET PF-STATUS 'ZDC'.
* SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
module USER_COMMAND_0200 input.
CASE SY-UCOMM.
   WHEN 'BACK'.
     LEAVE TO SCREEN 0.
     ENDCASE.
endmodule.                 " USER_COMMAND_0200 INPUT
*&      Module GET_DATA OUTPUT
module GET_DATA output.
SELECT * FROM SFLIGHT INTO CORRESPONDING FIELDS OF TABLE IT_SFLIGHT
                                                          UP TO 50 ROWS.
CLEAR WA_FCAT.
WA_FCAT-col_pos = '01'.
WA_FCAT-fieldname = 'CARRID'.
WA_FCAT-tabname = 'SFLIGHT'.
WA_FCAT-ref_table = 'SFLIGHT'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-col_pos = '02'.
WA_FCAT-fieldname = 'CONNID'.
WA_FCAT-tabname = 'SFLIGHT'.
WA_FCAT-ref_table = 'SFLIGHT'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-col_pos = '03'.
WA_FCAT-fieldname = 'FLDATE'.
WA_FCAT-tabname = 'SFLIGHT'.
WA_FCAT-ref_table = 'SFLIGHT'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-col_pos = '04'.
WA_FCAT-fieldname = 'PRICE'.
WA_FCAT-tabname = 'SFLIGHT'.
WA_FCAT-ref_table = 'SFLIGHT'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-col_pos = '05'.
WA_FCAT-fieldname = 'CURRENCY'.
WA_FCAT-tabname = 'SFLIGHT'.
WA_FCAT-ref_table = 'SFLIGHT'.
APPEND WA_FCAT TO IT_FCAT.
CREATE OBJECT o_cont
   EXPORTING
*    parent                      =
     container_name              = 'C1'
.DATA O_ALV TYPE REF TO LCL_ALV.
   CREATE OBJECT O_ALV
   EXPORTING
     I_PARENT = O_CONT.
CALL METHOD o_ALV->set_table_for_first_display
   CHANGING
     it_outtab                     = IT_SFLIGHT
     it_fieldcatalog               = IT_FCAT
CALL METHOD O_ALV->M1. "method called to remove all the toolbar buttons
endmodule.

How to remove all superscripts?

How to remove all superscripts from large document?
I tried to use find/replace and then find format, but i could not find superscript checkbox.

In Find/Change , under Find Format, go to the Basic Character Formats section and it's in the Position dropdown on the lower right.

How to remove all hyperlinks at once?

Hi guys,
I want to know how to remove all hyperlinks in a text at once. I know how to remove one link at a time. But it's time consuming if you paste a text with a lot of hyperlinks.
Thanks,
Adriano.

Duplicate your document for safe then drag and drop the icon of the copy of the icon of this script saved as an application.
--[SCRIPT remove links]{code}
Enregistrer le script en tant qu'Application ou Progiciel : remove links.app
Déposez le sur le bureau par exemple.
Glisser-déposer l'icône d'un document Pages sur celle du script
va éliminer tous les Hyperliens et signets prédsents dans le document.
On peut également qlisser déposer un fichier index.xml.
+++++++
Save the script as an Application or an Application Bundle: remove links.app
Store it on the desktop for instance.
Drag and drop the icon of a Pages document on the script's icon
to remove the Hyperlinks and Bookmarks embedded in the document.
We may also drag & drop an index.xml file.
Yvan KOENIG (Vallauris, FRANCE)
16 février 2009
enhanced 17 février 2009
--=====
property removeBookmarks : true
true = remove the bookmarks
false = don't remove the bookmarks *)
property removeLinks : true
true = remove the Links
false = don't remove the Links *)
property liste : {}
--=====
on open (sel)
set theDoc to (item 1 of sel) as text
tell application "System Events" to tell disk item theDoc
set nn to name
set uti to type identifier
set isPackage to package folder
end tell
if nn is "index.xml" then
my traiteIndex(theDoc)
else if uti is not in {"com.apple.iwork.Pages.Pages", "com.apple.iwork.pages.sffpages"} then
error "Not a Pages document !"
else if isPackage then
-- here the document is a package
if theDoc ends with ":" then set theDoc to text 1 thru -2 of theDoc
tell application "Finder"
set the_index to (theDoc & ":index.xml")
set indexGzAvailable to exists file (the_index & ".gz")
set indexAvailable to exists file the_index
end tell -- Finder
if indexGzAvailable then
if indexAvailable then tell application "Finder" to delete file the_index
my expandIndex(the_index & ".gz")
my traiteIndex(the_index)
else
if indexAvailable then
my traiteIndex(the_index)
else
error "No Index available !"
end if
end if -- indexGzAvailable
else
-- here the document is a flat one
tell application "Finder"
set cont to (container of file theDoc) as text
set name of file theDoc to (nn & ".zip")
end tell -- Finder
set theDocZ to cont & nn & ".zip"
my expandDoc(theDocZ, theDoc)
tell application "Finder"
set name of file theDoc to (nn & "yk")
set theDocF to cont & nn & "yk"
set the_index to (theDocF & ":index.xml")
set indexAvailable to exists file the_index
end tell -- Finder
if indexAvailable then my traiteIndex(the_index)
end if -- nn …
end open
--=====
on traiteIndex(theIndex)
local theKey1, theKey2, theKey3, theKey4, theKey5, itm, itm1, itm2, itm2
my nettoie()
(* Lis le contenu du fichier Index.xml *)
set texte to read file theIndex from 1
if removeBookmarks then
(* supprime les descripteurs de signets *)
set theKey1 to "<sf:bookmark sf:name"
set theKey2 to "</sf:bookmark>"
if texte contains theKey1 then
set my liste to my decoupe(texte, theKey1)
repeat with i from 2 to count of my liste
set itm to my decoupe(item i of my liste, theKey2)
set itm1 to item 1 of itm
set itm1 to text (1 + (offset of ">" in itm1)) thru -1 of itm1
set itm2 to my recolle(items 2 thru -1 of itm, theKey2)
set item i of my liste to (itm1 & itm2)
end repeat -- i
set texte to my recolle(my liste, "")
end if
end if -- removeBookmarks
Here are samples of Hyperlinks in the index.xml file
--link to bookmark
<sf:p sf:style="paragraph-style-32">
<sf:bookmark sf:name="page 3" sf:ranged="true" sf:page="3">
page 3
</sf:bookmark>
<sf:br/>
--link to URL
<sf:p sf:style="paragraph-style-32">
<sf:link href="http://discussions.apple.com/thread.jspa?threadID=1905618&tstart=0" sf:style="SFWPCharacterStyle-7">
<sf:span sf:style="SFWPCharacterStyle-7">
Change cell color if number is different from previous cell
</sf:span>
</sf:link>
<sf:br/>
--link to an other Pages document
<sf:p sf:style="paragraph-style-32">
<sf:link href="pages:///Users/yvan_koenig/Documents/Sans%20titre%20-%20copie.pages#un%20 signet%20externe">
<sf:file-alias sf:file-alias="0000000001ae000200010c4d6163696e746f7368204844000000000000000000 000000000000c45c8cef482b00000008a77c1853616e73207469747265202d20636f7069652e7061 67657300000000000000000000000000000000000000000000000000000000000000000000000000 000000360f06c5c03419000000000000000000010002000009200000000000000000000000000000 0009446f63756d656e747300001000080000c45c70cf0000001100080000c5c0260900000001000c 0008a77c0008a76f00006bdf000200414d6163696e746f73682048443a55736572733a7976616e5f 6b6f656e69673a446f63756d656e74733a53616e73207469747265202d20636f7069652e70616765 7300000e0032001800530061006e00730020007400690074007200650020002d00200063006f0070 00690065002e00700061006700650073000f001a000c004d006100630069006e0074006f00730068 0020004800440012003455736572732f7976616e5f6b6f656e69672f446f63756d656e74732f5361 6e73207469747265202d20636f7069652e7061676573001300012f00001500020012ffff0000"/>
<sf:span sf:style="SFWPCharacterStyle-7">
vers autre document
</sf:span>
</sf:link>
<sf:br/>
if removeLinks then
(* supprime les descripteurs de liens *)
set theKey1 to "<sf:link href="
set theKey3 to "<sf:span sf:style="
set theKey4 to "</sf:link>"
set theKey5 to "</sf:span>"
if texte contains theKey1 then
set my liste to my decoupe(texte, theKey1)
repeat with i from 2 to count of my liste
set itm to my decoupe(item i of my liste, theKey4)
set itm1 to item 2 of my decoupe(item 1 of itm, theKey3)
set itm1 to text (1 + (offset of ">" in itm1)) thru -1 of itm1
set itm1 to item 1 of my decoupe(itm1, theKey5)
set itm2 to my recolle(items 2 thru -1 of itm, theKey4)
set item i of my liste to (itm1 & itm2)
end repeat -- i
set texte to my recolle(my liste, "")
end if -- texte contains
This piece of code takes care of a bug in the save as Pages '08 process.
A link to an other document is not completely disabled so the 'disabled' link remains blue.
The link is stored this way:
<sf:p sf:style="paragraph-style-32">
<sf:span sf:style="SFWPCharacterStyle-7">vers autre document</sf:span>
<sf:br/>
when it would be:
<sf:p sf:style="paragraph-style-32">
vers autre document
<sf:br/>
if texte contains theKey3 then
set my liste to my decoupe(texte, theKey3)
repeat with i from 2 to count of my liste
set itm to my decoupe(item i of my liste, theKey5)
set itm1 to item 1 of itm
set itm1 to text (1 + (offset of ">" in itm1)) thru -1 of itm1
set itm2 to my recolle(items 2 thru -1 of itm, theKey5)
set item i of my liste to (itm1 & itm2)
end repeat -- i
set texte to my recolle(my liste, "")
end if -- texte contains
end if -- removeLinks
set lineFeed to ASCII character 10
if texte contains (lineFeed & lineFeed) then set texte to my recolle(my decoupe(texte, lineFeed & lineFeed), lineFeed)
if texte contains (return & return) then set texte to my recolle(my decoupe(texte, return & return), return)
set eof of file theIndex to 0
write texte to file theIndex
my nettoie()
end traiteIndex
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on recolle(l, d)
local t
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to ""
return t
end recolle
--=====
on nettoie()
set liste to {}
end nettoie
--=====
(* Expands the zip file z in the container d, z and d are pathnames as strings *)
on expandDoc(z, d)
do shell script "unzip " & quoted form of (POSIX path of (z)) & " -d " & quoted form of (POSIX path of (d))
end expandDoc
--=====
on expandIndex(f)
do shell script "gunzip " & quoted form of (POSIX path of (f))
end expandIndex
--=====
on lisIndex_xml(f)
local t
try
set t to ""
set t to (read file f)
end try
return t
end lisIndex_xml
--=====
on compactIndex(nDoc)
local aliasNDoc
set aliasNDoc to nDoc as alias
write leTexte to aliasNDoc starting at 0
do shell script "gzip " & quoted form of POSIX path of aliasNDoc
end compactIndex
--=====
--[/SCRIPT](code}
Yvan KOENIG (from FRANCE samedi 14 mars 2009 20:55:42)

Why can't anyone tell me how to remove all those little "!" in the left column all at once or at least sort them so I can mark them and then delete them?

Why can't anyone tell me how to remove all those little "!" in the left column all at once or at least sort them so I can mark them and then delete them?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
If, on the otherhand, you've been cleaning up your media from Explorer rather than iTunes and just want to eliminate the now broken links, use Tunes Folder Watch with its option to check for dead tracks on startup.
tt2

TS4147 How to remove all the duplicated contacts from ICloud?

How to remove all the duplicated contacts from ICloud?

If your Mac is syncing contacts with your iCloud account, open Contact on your Mac and go to Card>Look for Duplicates, then Merge the found duplicates. These changes will be synced to iCloud.

How to remove or change wipe effect in MenuBar?

Does anyone know how to remove or change the default wipe
effect in Flex 3's MenuBar? I've seen several mentions online about
an openDuration property in the Menu class, but not in MenuBar. I
would greatly prefer to have either no effect or just a very brief
fade.
A solution in either MXML or ActionScript would be greatly
appreciated.
Thanks very much!
Mike Laurence

We had an old version of Dreamweaver (DW-MX) in which I have found the layer. It apears to be an image made in Photoshop.
The way I solved the problem now is that I deleted the layer in DW-MX and made a new background image. I am no pro, just an amateur
Anyway, thank you very much for your fast reply and the offer to help me out this problem.

How to remove and change the color of Java cup and border

Hi to all,
How to remove and change the color of Java cup and border.
Thanks in advance
khiz_eng

This is just an Image. You would need to create your own image and call setIconImage(Image) on your JFrame.

How do you save changes made in iPhoto, and export the changed file. It keeps reverting back to the original.

How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Best way to remove all changes

What is the best way to remove all changes that were done to an image in Camera Raw, to get the image back to the way it was originally?

Thanks for the suggestion. That would probably work if the file was still open in Camera Raw. But when the file has been opened in Camera Raw, changes are made, then click Done and the image is closed -- the next time it is opened in Camera Raw, Alt/Option clicking the Reset button does not return the image to it's original condition.

Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Try a new profile. See [[Recovering important data from an old profile]]

How to remove all changes made to an image in Camera Raw -

Similar Messages

Maybe you are looking for