Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

Hi,
There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
Multi-Environment Certified IVI Instrument Driver
Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
Try LabVIEW 7.1 FREE Online
If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
-John M

Similar Messages

GPIB-USB-A-- NI488.2 2.0

Installing a GPIB-USB-A, installs okay and the NI 488.2 2.0 software
installs
okay. The NI488.2
"Add GPIB Hardware" and
"Getting Started Wizard" both find and detect the GPIB-USB-A hardware and
it
passes the tests.
But MAX does not find it or recognize it in the "Devices and Interfaces:
Section of MAX.
Refresh does not find it either.
OS: Windows XP Professinal
This is on a new DELL 8250 computer with 2 USB ports on back and two on
front.
I have it plugged into one of the front USB ports. Could that be a problem?
NI Software : LabVIEW version 6.1
NI Hardware : GPIB/IEEE 488 device GPIB-USB-A
Driver Version : NI 488.2 2.0
OS :Windows XP
CPU :2.4 GHz
RAM :512 MB
Vendor : DELL

Hi,
Try this: go to Tools >> Install Legacy Driver Support. This seems strange but it should update the installed drivers. If this fails, there are some good suggestins at this thread:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000D8520000&ECategory=LabVIEW.LabVIEW+General
Hope this helps out! Let me know if this works for you.
Best Regards,
Aaron K.
Application Engineer
National Instruments

Which GPIB-USB Interface to Buy?

Other than for the great support on this forum (!), why should I buy a GPIB-USB-B instead of an Agilent 82357A? My application is general-purpose lab use.
Steve

The GPIB-USB-B supports both NI-488.2 and NI-VISA APIs. The Agilent 82357A only supports the VISA API. National Instruments has done quite a bit of work to ensure that the GPIB-USB-B driver maintains backwards compatibility with previous NI-488.2 interface drivers. We have also done extensive testing with LabVIEW. With the GPIB-USB-B, you'll have the luxury of selecting from a wide range of programming environments and APIs.
Craig A.
National Instruments Engineer

I am looking for R3765C driver software for USB -GPIB? Thanks!

Now we bought NI GPIB-USB-HS connector, but we cannot get the driver software(R3765C Advantest) from the opened NI driver software.
If anyone can give some informations about it, it will help me very much! thanks!

Hi, my name is Yusuke Minami, Applications Engineering, National Instruments Japan.
You can download the instrument driver for R3765C Advantest at:
http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=2588
I hope this will work well.
日本ナショナルインスツルメンツ株式会社　技術部　巳波裕介
Yusuke Minami, Applications Engineering, National Instruments Japan
技術サポートウェブページ:　http://www.ni.com/support/ja
お問い合わせフリーダイヤル:　0120-527196

Looking for Labview driver for Agilent 4294A (HP)

Help!
I've been browsing the driver database looking for the Labview GPIB driver
for Agilent(formerly HP) 4294A Gain-Phase Analyzer.
Does anyone know where I can get it?

Hello all,
NI is interested in developing LabVIEW and CVI drivers for the Agilent 4294A. I have been trying to obtain one of these units on loan from Agilent for the past couple of years with no success. If anyone can spare their 4294A for the duration of driver development or can influence Agilent to loan a 4294A, NI will write certified CVI and LabVIEW drivers for it.
Jason Hobbs
Instrument Drivers

Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

Hi,
Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
uggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
Some useful resources for your application are
ni.com > NI Developer Zone > Development Library > Instrument Connectivity
http:/
/search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
Hope this helps!
Best Regards,
Aaron K.
Application Engineer
National Instruments

Looking for a way to get my Product ID and Vendor ID so I can enable my Radium 49 USB MIDI keyboard to work with Labview 7

Looking for the Product ID and Vendor ID for my Radium 49 USB MIDI keyboard to work with Labview 7
Is there a tool to find out the Vendor ID and Product ID for a USB device?
Example: of what I'm looking for
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The
USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093)
(that is decimal 4243).
Thanks for all the fast responses this newsgroup RULES!!!!!!!!!!!!

http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
How To Find The Vendor and Product ID for USB Devices?
Primary Software: Driver Software>>NI-VISA
Primary Software Version: 3.3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Problem:
I want to make an NI-VISA driver that requires the vendor and product ID?
Solution:
There is a utility called USBView,
free from Windows, attached below, which you can use to view what is
connected to your computer's USB ports. It is necessary to load this
program and connect the USB device in development. Upon selecting the
device in USBView, one can then look on the right side of the
application window to obtain the Product ID and Vendor ID. This will
allow you to enter in the correct IDs when creating a driver .inf file
when using the VISA Driver Development Wizard. For more information
about how to use the VISA Driver Development Wizard see the related
links below.
Note: It is necessary to keep the hexadecimal
(0x####) format. Do not remove the "0x" hexadecimal format preceding
the ID number.

Looking for All on one with USB Flash Drive Print/Scan support

I am looking for an All in One Print/scan/copy. It should support print from USB Flash drive and scan to the same.
Thanks

Hi,
You may check the HP Officejet 6600/6700 models which support USB Flash drivers.
You may find the flash driver specifications listed within the Memory Device specifications below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03058896&cc=us&dlc=en&lang=en&lc=en&product=505...
As well you may check the HP Officejet 8600 Series which supports both USB Flash Driver and Memory cards, its specifications can be located below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&cc=us&dlc=en&lang=en&lc=en&product=432...
Both of the products above provide Print, Scan, Copy and Fax functionality.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to tell Front Row to look for movies on a USB drive?

I'm working on getting all my dvd's on two 500gb usb drives - using Handbrake to encode everything. This is much faster with a new 2.4ghz 24" iMac by the way (6-8hrs on my 1.8ghz athlon vs 1-2 with the iMac...woohoo).
What I'm trying to do is get the movies (on the usb drives) to show up in Front Row. One way I know of is by making an alias for each movie and moving the alias to my "Movies" folder on the main HD. This is a little tedious. When I simply drag and drop it in the "Movies" folder it just copies it and that is not what I want. Is there a way to just tell Front Row where to look for the movies? If I use iTunes the same thing happens, it just transfers all movies to the main HD...nevermind. I unchecked the box that said to copy everything.
The plan was on using iTunes for movies I encode specifically for iPods exclusively, searching through 600+ movies to get a few for the iPod doesn't seem user friendly.
So the question remains. Is there another way to get Front Row to just see the movies on another drive without iTunes or using an alias for each one or are those 2 my only choices?

I'm glad you got it figured out. Front Row actually looks for movie files in two places. First, as you've discovered, it looks inside your user's "Movies" folder. An alias there pointing to a different location will lead Front Row to the other location. Also, Front Row looks inside iTunes for movies. This way, it can find TV shows, music videos and movies purchased from the iTunes Music Store. Another option, besides making an alias in your "Movies" folder, would be to add the movies to iTunes.
-Doug

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply!

What file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

what file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

Hi,
Multiple files are required for the proer fnctioning of any of our GPIB products. Unfortunatly the installation is not as simple as copying a single file over. If you wish to make the installer silent, i believe this is entirely possible in a fashion similar to the details given at http://digital.ni.com/public.nsf/websearch/0730A66245E6808086256CA8006E2183?OpenDocument.
Hope this helps out!
Best Regards,
Aaron K.
Application Engineer
National Instruments

Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
Does anyone have one?
Thanks,
Avner

Hello,
It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
Thank you,
JLS
Best,
JLS
Sixclear

Looking for labview driver to control Tennesy Chamber

Looking for Labview driver to control Tennesy Jr Environmental Chamber
(Watlow series 942 controller) LV6.0
Email [email protected] if you can help out.
Thanks,
David.

The first place to look for stuff like this is the vendor's web page--in this case www.watlow.com. How did I know this? I guessed. You can typically guess 90% of company websites...
In a couple minutes I was able to find your controller and a document on how to communicate with it. If you email me I can send it to you (it's too big to post...).
Next, reading the document (which by the way contains a good basic primer on serial communications)I saw that one of the protocols you can use for communicating with the 942 is Modbus RTU. I can also send you a set of modbus drivers.
Hope this helps in thermal testing your chips...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.

I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.

Hi,
I am not sure what the R3271 is, but we have a driver for the R3272 (Spectrum Analyzer with GSM option). Normally API's do not change significantly and so it is very likely that you will be able to use this driver for your application. You can get it by going to www.ni.com/idnet. The easiest way to get the the page is just to seach by vendor.
Hope this helps out.
Aaron K.
Application Engineer
National Instruments

Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

Similar Messages

Maybe you are looking for