Lookout project file loading error

Hi folks,
I've got this problem.
I migrate a project to Lookout 6.1 to Lookout 6.5 opening the .lks file an generating the .l4p file.
I made lots of modification using the symbolic link objects with the dynamical option to point to communication objects data members (OPC client objects) and to internal object (Data table ojects data members).
Usually, after lots of modification, I reopen a project using .lks file to recompile it.
Now rises the problem.
If I load the lks file, lookout compile the source file without errors, but when it load the process file it goes in error after a little while and the usual error windows appears. In the event viewer I find this information:
Event Type:    Error
Event Source:    Application Error
Event Category:    None
Event ID:    1000
Date:        27/05/2011
Time:        15.25.40
User:        N/A
Computer:    VM-TEST-AB
Description:
Faulting application lookout.exe, version 6.5.0.49153, faulting module unknown, version 0.0.0.0, fault address 0x00005f6f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6c 6f 6f   ure loo
0018: 6b 6f 75 74 2e 65 78 65   kout.exe
0020: 20 36 2e 35 2e 30 2e 34    6.5.0.4
0028: 39 31 35 33 20 69 6e 20   9153 in
0030: 75 6e 6b 6e 6f 77 6e 20   unknown
0038: 30 2e 30 2e 30 2e 30 20   0.0.0.0
0040: 61 74 20 6f 66 66 73 65   at offse
0048: 74 20 30 30 30 30 35 66   t 00005f
0050: 36 66 0d 0a               6f..
If I load the process file .l4p, the project are correctly loaded and run.
I try to compile manually the source project using cbl. After, when I load the .l4p file, the error rises.
I check the symbolic links and It seems they are correct. I defined data members to point to obviate to point to a non existing object. In this way, the symbolic links always point to existing objects.
Any ideas?
Thanks to all
Mario Fanelli
Solved!
Go to Solution.

Now I rename all the data member names too long into one short. It's a long work. In the projects made under lookout 6.1 I had no problems with recompile and load using the data members names too long. Could be possible that a dynamic symbolic link causes a crash during the loading after the compiling phase? How the dynamic symbolic links are generated when a project starts? I have found a strange mode of operation about the dynamic symbolic links (an example is attached). When you define a symbolic link, you can generate an expression dragging the symbolic link on a panel (in the example is the expression in the high left side of the panel). When you reload the project, go into edit mode operation and try to drag a new expression with the symbolic link, you can't define it. It seems a dongle symbolic link. Only if you rewrite the expression inside the symbolic link, you can drag the new expression. Anyway, the symbolic link works correctly.
Mario Fanelli
Attachments:
ex.zip ‏5 KB

Similar Messages

Error writing the project file. Error loading type library / dll

Hi all,
I am trying to create a new portal project in PDK.NET. But I am getting this error- "Error writing the project file. Error loading type library / dll". Can anyone tell me how to solve this error.
rgds

I get this same error. Was working fine until I installed the SAP .Net Connector 2.0. Now it does not work even after it was uninstalled. Please help.

Cannot open existing Project File - General Error

I recently copied some FCP 4.5 projects from one drive to another (drag and drop) due to drive space issues. I did NOT use media manager to do this. I did not delete any files before I went back to try and open the project in the original location. Instead of the project loading, I got the "General Error" message. I could not open the newly copied version either. I deleted all rendered files I could find, no luck. My scratch discs are not located in one area (since some have been moved too), and I wonder if the links have gotten scattered. Does this have anything to do with this problem? If one moves an existing project's scratch disk files to another location, will it cause this problem? Any help will be appreciated. My deadline approaches quickly.

Moving project files shouldn't mess things up, unless you've updated FCP version.
I see you're on Tiger...have you been able to work FCP 4.5 projects on that OS/QT, in the past?
Moving the scratch files will drop the link, but you should be able to 'reconnect media' to get them back, provided you can get your project files to open.
Have you tried opening an autosave version of the project files in question?
K

HELP! Can't Open a FCP project File, "General Error 41"

Trying to open a project for a Good guy
over a barrel, using FCStudio /FCP 5.1 FCP opens,
then says "General Error 41". All I need to
do is create an SD Version DVD, But first
I Gotta open it.
G5 Mac OS X (10.4.9)

Since this is your friend's FCP project file, check to see if he/she has version 5.1.1 or above.
I think the project file is from a newer format.
For some reason, the bump from FCP 5.1 to 5.1.x was big enough to require the project files to be a different format.
If that is the case, (and if you want to take the chance on the unknown,) you can upgrade to the version your friend has (or above.)
Make sure you really want to upgrade and are prepared for all the potential problems!
Dual G5 Mac OS X (10.4.9)

"project file missing" error message

I've got 2-3 hours worth of footage from a vacation i took and it would be a real pain to to reimport and re-edit everything.. so i really hope you can help me.
whenever i try to open the movie file, iMovie gives me an error message saying "a project file is missing" "The file "_" couldn't be opened and is being skipped. Click "Ignore All" to skip any remaining missing file messages."
Then it gives me two options - Ignore All and Ok.
the weird thing is it doesnt specify a file. it just calls the file "_"
i've got some music files in it i may have moved around, but besides the fact the movie is on an external hard drive, i cant think of any other reason it would do that.
please help!

As Jeez33 suggested, the file name iMovie is asking about can't be relied on. Something has caused iMovie to either store the name incorrectly in the project file or retrieve the name incorrectly from the project file. The file it's asking about probably doesn't exist and probably never did. The usual cause for this problem is the wrong disk format for the project's disk. (Not the main disk.) So it's garbage in, garbage out.
Another possible cause is that either the project disk or the Mac's own main disk is too full. That can cause disk errors. I mention that because both your disks are quite small. As iMovie works with large video files, a tremendous amount of disk space may be required. So make sure you have plenty. 10 GB free.
You also might try looking inside the Media folder of the project to see what you can see. To look inside the project package, Control-click on the project icon and choose "Show Package Contents" from the popUp menu. Then look inside the Media folder. That will tell you what files are there. Look for any unusual characters in the file names, especially "/", which can confuse iMovie.
It's possible too that the project file has been damaged. The project file is loose inside the package. Its name is "Your Project Name.iMovieProj". When you double-click on the project icon, that's the file that opens.
There's a second project file named "Your Project Name.~iMovieProj". (Note the tilde.) That's a kind of project backup, the PREVIOUSLY-saved version of your project. Try double-clicking on that. If it opens the project successfully, quit iMovie, remove the tilde from the name, and let it be your project file. When you next save, iMovie will create a new tilde file.
Your Mac's hard disk or the external disk may also need some disk repair. Use Disk Utility to verify and repair the external drive. If the drive directory is flawed that can make it impossible for iMovie to read/write to files on the drive, including to its own project file.
Karl

Flat file loading error

Hi,
I have load master data through flat file . Now i am trying to create transaction data source but getting a error.
Data Consist of Custid, Qty,Sales Revenue
Qty consist 0Unit and Sales Revenue consist 0Currency
When i enter Qty..the format is internal
When i enter Sales Revenue..the format is external
even after changing sales revenue format to internal..i am getting the below error.
When i click on Preview i got this: Error 'Unit 100 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value 100)
why i am getting this
Thanks
nikhil
Edited by: nikhil29 on Jan 19, 2012 10:20 PM
Edited by: nikhil29 on Jan 19, 2012 10:27 PM

Hi Nikhil,
The simple solution to this is,
Go to SE37 and use FM CONVERSION_EXIT_CUNIT_OUTPUT here give the input as whatever value you are currently passing to 0unit field through excel file. Execute the FM and check the output, if you get the successful output then copy the 0unit code shown in the output and replace it with unit field value written in the flat file (mostly it will be 2 digit code e.g. for unit BAG the code will be BG).
Here you will have to pass the valid unit value which will be converted to correct internal format. You can try different units by above method and you will have to use any of those units for which you are getting successful output.
Regards,
Durgesh.

Flat file load Error 1

Hi ,
Iam trying to load flat file to infoobject. when i tried to load it , iam getting an error ( see below), iam not getting this error when i loaded in dev and Quality. only getting error in Production. the file contain only 2 records.
is there any access required rights required in production ?
Error 1 when loading external data
Message no. RSAR234
Diagnosis
Error number 1 occurred when loading external data:
1. Error when reading the file (access rights, file name, ...)
2. File size or number of records does not correspond to the data in the control file
3. Error when generating the IDoc
4. File contains invalid data (errors with an arithmetic operation or data conversion)
Procedure
Check whether you have the required access rights and whether the data in the control file is correct (file names, record length, number of records, ...). Correct the data in the control file if necessary and check the data file for invalid data (values of the wrong type, values in the wrong format for conversion exit,...). Check whether the file has headers that have not been specified.

Hi
Check your Authorization for Loading the Flat File/ Access the work Station from AL11 ..
Check your Transformation Rule Details for the Conversions / Data Types are mapped correctly.
If Infopackage loads data from a flat file on your workstation, then you cannot execute the Infopackage in a Process Chain you need to put your flat file on the Application Server(AL11) and change your Infopackage to load from there instead of the workstation
The file should be closed while scheduling
The file path mentioned in the external data tabpage of the infopackage should be correct
Records in the file should be in uppercase you can use lowercase for a particular characteristic.provided the lowercase checkbox in the general tabpage of the maintenance screen of the infoobject is checked.
Calendar day should be of the format yyyymmdd in the file
Hope it helps

Flat file load error

Hi.
I am getting the following error when loading .csv file from "Client Workstation" but the same file is loading fine from "Application server".
Value '10/1/206 ' of characteristic 0DATE is not a number with 000008 spaces
I look for your suggestions to solve and understand this.
Thanks
Kumar

Hi Dinesh,
I solved the problem by using SDATE in transfer rules as per the SAP note 161506. I am giving the note below for others who might land with similar problem.
Thanks
Kumar
SAP Note Number: 161506
Summary
Symptom
You want to transfer data from a source system into BW from a file (flat file) that also includes date entries (for example, for the 0CALDAY InfoObject). However, when you load the data, the data disappears.
Other terms
Time characteristic, transfer structure, transfer rules, InfoPackage Scheduler, InfoSource
Reason and Prerequisites
In the flatfile of the source system, a date exists which is not stored in the internal format YYYYMMDD but in the external (user-specific) format. In the transfer structure maintenance, no routine is specified for the conversion exit for the corresponding date field. An incorrect data type and an incorrect length can be assigned additionally. The missing conversion exit causes an incorrect processing of the date during the conversion to the internal format of the type DATS and length 8.
Solution
In the maintenance of the transfer structure, standard values that expect the date while the data is being stored in the internal format of the YYYYMMDD system are entered for the 0CALDAY InfoObject (calendar day):
InfoObject Field name Type Length Conversion exit   0CALDAY       CALDAY      CHAR      8
The problem described above is corrected with the conversion of the date fields into the internal format in the flatfile.
If you want to maintain the external format of the date in the source file, implement the following changes in the transfer structure maintenance for the 0CALDAY field:
InfoObject Field name Type Length Conversion exit   0CALDAY       CALDAY      CHAR    10   SDATE
Note that the type must always be CHAR (not DATS). The predefined field length is changed from 8 to 10, and additionally the conversion routine SDATE is entered.
IMPORTANT: The external format for the date in the flat file must match the standard settings of the user in the system (System -> User profiles -> Own data -> Fixed values) such as DD.MM.YYYY MM/DD/YYYY and so on.
Each time you make a change in the maintenance of the transfer structure, you must
a) save the new entries,
b) activate the transfer rules again (InfoSource -> maintain transfer rules),
c) exit and access the Administrator Workbench again (see related notes below) before the next set of data is loaded.
Header Data
Release Status:     Released for Customer
Released on:     03.09.2004 08:27:34
Priority:     Recommendations/additional info
Category:     Consulting
Primary Component:     BW-WHM-DST Data Staging
Releases
Release Independant
Related Notes
157643 - Format 0CALMONTH, 0CALWEEK and 0FISCPER incorrect
155706 - Changes to transfer rules are ignored

Flat File load error on 0FISPER format

Hi Experts,
I need load a flat file in BI 7.0. The error in on 0FISCPER
a basic questions..
a) the right format in flat file is "0072008" or "2008007" ?
b) in datasource, tab proposal and fields, which is the right format (datatype, lengh) ? the format must be Externa, Internal or Check?
c) does I need created this year (2008) on other system tables? ex: calendar table, T009, etc..
Thank you in advance!

HI,
a) the right format in flat file is "0072008" or "2008007" ?
b) in datasource, tab proposal and fields, which is the right format (datatype, lengh) ? the format must be Externa, Internal or Check?
- You can use in any format, if you are using 0072008 u have to use "External" in your Datasource level. If you are using 2008007, u have to use "Internal"
c) does I need created this year (2008) on other system tables? ex: calendar table, T009, etc..
- No need to create year in any table. when you are loading the data, it automatically store in respective table
Regards
Rajesh

Master Data Flat File Loading Error

Hi guys.
I received the following error when try to preview a master data flat file.
109 ENDIF.
110 ENDIF.
May I know how to solve this?
Thanks!

Fulham,
Please give us the nature of data you are loading and also try and simulate the same and see if it goes through.
What are the infoobjects you are loading for the master data ...?
Arun

Bitmap file load error

Hi all,
When I tried to load Bitmap file into sap using SE78, I got the following error.
Bitmap file: No color table available. (True color, Bitcount32 ).
Please help..
Thanks,
Srinivas.

Hello Enivas,
What kind of picure are you trying to upload?
Color?
Grayscale?
Black & White?
Select the appropriate check box while uploading the BMP pic in SE78.
That would solve your problem
Thanks,
Babu Kilari

HFM Security file load error

Hi All
I am facing an error while loading the security file in Hyperion Financial Management which reads as:
The specified item already exists.
Show Details:
Error Reference Number: {8D871273-18BC-4103-BF90-8196E3BFAFFC}
Num: 0x8004021f;Type: 0;DTime: 5/26/2009 12:56:09 AM;Svr: BHIHYPDVH24;File: CHsvSecurityAccess.cpp;Line: 2856;Ver: 9.2.0.0.1380;
Num: 0x8004021f;Type: 0;DTime: 5/26/2009 12:56:09 AM;Svr: BHIHYPDVH24;File: CHsvSecurityLoadACM.cpp;Line: 2034;Ver: 9.2.0.0.1380;
Num: 0x8004021f;Type: 0;DTime: 5/26/2009 12:56:09 AM;Svr: BHIHYPDVH24;File: CHsvSecurityLoadACM.cpp;Line: 377;Ver: 9.2.0.0.1380;
Num: 0x8004021f;Type: 0;DTime: 5/26/2009 12:56:09 AM;Svr: BHIHYPDVH24;File: CHsvSecurityLoadACV.cpp;Line: 209;Ver: 9.2.0.0.1380;
Has anyone seen this error before? Please let me know the resolution or the cause atleast.
Thanks in advance
Rahul

Hi Thanos,
Thanks for the reply!!
Yes, I tried extracting some ownership data for the years 2013 and 2012 and I was successful in loading the data back.
I extracted the 2013 ownership data updated the year to 2014 and month to Jan and try to load it back then I am getting these errors.. same with for year 2015 and future years..
The format of the load file looks correct as I was able to load for previous years with the updated ownership data with no errors..
I killed the HFM process on the app server and tried to load it back but still could not succeed.
Any suggestions.. please help...
Thanks again!!

BW Flat file Load error

I am doing flat file in BW System. InfoPackage setting are as follows,
File is CSV file
Data Separator = ,
Escape Sign = u201C
In Transfer Structure all are char fields.
1st Filed is of length 18
2nd Filed is of length 18
3rd Filed is of length 25
4th Filed is of length 10
e.g of data in flat file is as follows
"00q80000003AmvHAAS","00530000000jSm8AAE","US02CALVER;H21020101","2008-11-24u201D
This data will load successfully every time, but if data comes like this
"00q80000003AmvHAAS","00530000000jSm8AAE","US02BVERFU;H21020101;H21020102;H21020104;H21020201;H21020202;H21020203;H21020204","2008-11-24u201D
Then in preview itself I canu2019t see the date(4th filed will be blank) it will blank or some times it will be some char like 200 or 2008 or 2008-11 etc.
Can you please tell me why this is so? How to solve this issue?

I've come accross a similar problem. Maybe another view will help someone find an answer.
The transfer structure looks like this:
MATERIAL                0MATERIAL     Material          CHAR     18
MAT_NAME             ignore                                CHAR     1
REGION                  ignore                                CHAR     1
PLANT                  0PLANT          Plant               CHAR     4
PLANT_NAME             ignore                                CHAR     1
VENDOR                  0VENDOR          Vendor          CHAR     10
VENDOR_NAME     ignore                                CHAR     1
CURRENCY             0CURRENCY     Currency          CUKY     5
UNIT                          0UNIT          Unit of measure     UNIT             3
/BIC/CGRPLEAD     CGRPLEAD     Goup leader     CHAR     3
/BIC/CMONTHFR     CMONTHFR     Month from     CHAR     7
/BIC/CMONTHTO     CMONTHTO     Month to          CHAR     7
/BIC/AREBATES     AREBATES     Rebate          CHAR     17     2
The csv file looks like this:
10000001,Dry ring def,NA,1001,plant 001,100000,Main vendor in United Stat,USD,TO,CR,200701,200812,3.00
10000001,Dry ring defl,NA,1001,This is the name for pla,100000,Main vendor in United States of,USD,TO,CR,200701,200812,3.00
Line 1 will load correctly like this:
10000001|D|NA|1001|T|100000|M|USD|TO|CR|200701|200812|3.00
but line 2 will be cut off and loaded link this:
10000001|D|NA|1001|T|100000|M|USD|TO|CR|200701|20081|0.00
with the month to and amount incorrect.
There must be a length limit to the incomming text but it doesn't seem to relate directly to the field lengths of the transfer structure.

Flat File Load error on ODS

Hi Guru's,
I am loading a Multiple Flat files to ODS in 3.5.
first i loaded a flat file with the following.
Calweek , SS, Mat, Cust   Item ,Commentof Item
11/2004 , MD, 101, YU23   pen,   good
after loading this i am able to these data on ODS
second file am loading file with
Calweek , SS, Mat, Cust Price , commentofprice.
11/2004 , MD, 101, YU23   2.00, average.
when i checked the data on ODS i am able to see only second
file data . with selection conditions 11/2004 , MD, 101, YU23
I can use Cube for loding this but my design is on ODS.
i want to see all the data on ODS, can anyone give me idea how to write any routine for this
Regards
Rao VS

Hi Yogesh & Shambhu,
Thanks for your support. and what i did currently is
i kept the keyfields as same and changed the ITEM,PRICE as ADDITION in the update rule.
But for commentonitem, CommentonPrice there fields are Char.
so i cann't find Addition option to this.
By doing this :
1) when i loaded 1st file i am able to see the original file.
and
2) when i loaded second file i am able to see the second file values also.
But the issue is after loading two files i am able to see on the ods as
Calweek,SS,Mat,Cust, Item,Price,CommtofItem, Commprice.
11/2004 , MD, 101, YU23 pen,2.00,    -               ,average
I am not able to see Commentof Item Value and can see only the last loaded Comments filed.
If i loaded second file first and then first file secondly then i can see only Comment of Item .
So can you pls help in written routine for these fileds in update rule (commentson item,commentson price)
Thanks & Regards
Rao VS

JQuery/Js File Loading Errors

Having occasional issues with Firefox 4 on Win732Bit, occasionally wont open JavaScript Files (mainly jQuery.js) on multiple different servers including my own.
Can be sporadic hard refresh usually then loads. Firebug indicates it hasn't defined the use of $ in jQuery.
Has happened on my own servers and it has happened twice to me in 2 days on miniclip.com.

Corrected file header
* Modal Dialog Box
* copyright 8th July 2006 by Stephen Chapman
* http://javascript.about.com/
* permission to use this Javascript on your web page is granted
* provided that all of the code in this script (including these
* comments) is used without any alteration
**/

Lookout project file loading error

Similar Messages

Maybe you are looking for