Lookout WebClient Not Showing the Same data as on Server

Dear All,
I want to acquired/view the same process data on the lookout web client computer as i have develped on the Server, I completed the following steps.
Server Machine Steps.
1. I created the Lookout process on the development machine.
2. I created the LKWebClient on the C Drive root e.g C:\LKWebClient
3. I configured the web Directory as        c:\lkwebclient\
4. The Server URL was       http://server/llkwebclient/
5. I exported WebServer Files.
Note: I saved the process file process1.l4p in the root directory of lookout    e.g C:\program files\National Instruments\Lookout 5.0\
as it was suggested by lookout process.
Client Machine Steps.
1. I went to Internet Explorer
2. I type the following     //server/LKWebClient\Process1.htm
3. It is showing me the same Panel which i have created on the server computer
than what is problem???
When i change the value of contorl (Bush Button, Pot ), it is not reflecting on my Client Computer.
How i can view the changes on my Client Computer.

Which process do you compare with the web client process?
You should firts create a client process which connects to the server process. Then compile it into web client process. When you run the .htm file, you will see the client process in IE, and you should also run the server process in Lookout at the same time. The web client process connects to the server process directly.
If you run the client process in Lookout, does it work fine? Assume you use symbolic link in client process, take care the URL of the symbolic link, it should be absolute path.
Ryan Shi
National Instruments

Similar Messages

Sub Report in Table, always showing the same data

I created a main report with data from a dataset. The DataSet has a column: @Region_ID. The Main Report is Page-Grouped by this @Region_ID and shows a tablix with some datarows foreach region.
I now want to include a subreport into the table and pass the parameter @region_ID to the subreport, which also calls a procedure including the passed @region_ID. I set the @region_ID-Parameter to "always refresh"
I added a textbox on the subreport to display the values which has been passed to the subreport.
I now have a multipage report, with a page for every region. The subreport displays various @region_ids in the textbox, but the data for the subreport itsself, shows the same data on every page. It seems like it has called the procedure only once, with the
first @region_id, and now displays this data on every page, allthough it does not match.
Any suggestions what I did wrong?

Hi tkrasinger,
According to your description, you have the issues on displaying the parameter in subreport. It only shows the first value of the parameters. Right?
In Reporting Services, when we execute a procedure with parameter, this procedure will only be executed one time. This is the reason why it shows the same value in your subreport.
In this scenario, we can just right click on the textbox of region_id, go to
Texobox Properties -> Action -> Go to report. Select the subreport, add the region_id as parameter in
Use these parameters to run the Report. When you click on the textbox, the region_id will be passed to the subreport. So that the value will be displayed dynamically in the subreport.
Reference:
Add a Subreport and Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

HT1349 I have i tunes on two computers using the same apple id but each library is not showing the same songs

I have i tunes on the computer with over 1000 songs on it and i also have loaded i tunes on my laptop as i want to get rid of the computer but the library on the laptop is not showing the same songs
how can i transfer the songs from the computer to the laptop

How to move your iTunes music to a new/different computer.
http://support.apple.com/kb/HT4527

Query result shows the same data twice

Hello All,
I've created UDFs like Supplier Name, Supplier Address, and (Excise Details like)Supplier ECC No,
Supplier Range.
And I've created Query for Supplier Name and Supplier Address, and I assigned to FMS, Its working Correctly.
I've created Query for Supplier ECC No. the Query is,
SELECT T0.[ECCNo],T1.[CardName]
FROM CRD7 T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
WHERE T0.[ECCNo] Like '[%]'
I saved the Query, and assigned to FMS.
At this stage (i.e. Query for Supplier ECC No.) the above Query showing the same data twice.
Please suggest to rectify the problem.
Thanks,
Pratheeviraj

You can get rid of the duplicates by changing the query to
SELECT DISTINCT T0.ECCNo,T1.CardName
FROM CRD7 T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
WHERE T0.ECCNo Like '[%]'
But it is always worth understanding why you are getting multiple records to check that you are getting back what you want. I think you may be seeing this because CRD7 can have multiple records for a business partner - maybe one for each of 'pay-to' and 'ship-to' address?

My iphone calendar wont sync with my outlook calendar. My inbox seems to be syncing just fine, its just that my iphone calendar is not showing the same events i have in outlook.

my iphone calendar wont sync with my outlook calendar. My inbox seems to be syncing just fine, its just that my iphone calendar is not showing the same events i have in outlook.

Hi
I have the a similar problem - only I can't actually get the calendar to show up. I've added the account and it's showing Mail and Notes but not Calendar. But I'd like it to show the outlook calendar.
I'm going to
Go to settings > mail contacts calendar
select your account that's affected
But under that account there isn't a calendar showing and I can't see any options to add it?

Iphone 4 Calendar date not showing the write date

I just upgraded to the ios 5.1.1 from 4.2.1. I have a Iphone 4. After the upgrade, my iphone's Calendar date is not showing the right date. in order for the right date to show, I either have to re-start my iphone or I have to go into settings/general/date&time and turn off the set automatically off than on in order for it to show the right date. I didn't have this problem before the upgrade. I hope someone can help?

I had a similar problem and then found that my calendar was not set for the right date and year. Check that first.

OC4J: marshalling does not recreate the same data structure onthe client

Hi guys,
I am trying to use OC4J as an EJB container and have come across the following problem, which looks like a bug.
I have a value object method that returns an instance of ArrayList with references to other value objects of the same class. The value objects have references to other value objects. When this structure is marshalled across the network, we expect it to be recreated as is but that does not happen and instead objects get duplicated.
Suppose we have 2 value objects: ValueObject1 and ValueObject2. ValueObject1 references ValueObject2 via its private field and the ValueObject2 references ValueObject1. Both value objects are returned by our method in an ArrayList structure. Here is how it will look like (number after @ represents an address in memory):
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@2
Object[1].getValueObject[0] = com.cramer.test.SomeVO@1
We would expect to see the same (except exact addresses) after marshalling. Here is what we get instead:
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@3
Object[1].getValueObject[0] = com.cramer.test.SomeVO@4
It can be seen that objects get unnecessarily duplicated â“ the instance of the ValueObject1 referenced by the ValueObject2 is not the same now as the instance that is referenced by the ArrayList instance.
This does not only break referential integrity, structure and consistency of the data but dramatically increases the amount of information sent across the network. The problem was discovered when we found that a relatively small but complicated structure that gets serialized into a 142kb file requires about 20Mb of network communication. All this extra info is duplicated object instances.
I have created a small test case to demonstrate the problem and let you reproduce it.
Here is RMITestBean.java:
package com.cramer.test;
import javax.ejb.EJBObject;
import java.util.*;
public interface RMITestBean extends EJBObject
public ArrayList getSomeData(int testSize) throws java.rmi.RemoteException;
public byte[] getSomeDataInBytes(int testSize) throws java.rmi.RemoteException;
Here is RMITestBeanBean.java:
package com.cramer.test;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.util.*;
public class RMITestBeanBean implements SessionBean
private SessionContext context;
SomeVO someVO;
public void ejbCreate()
someVO = new SomeVO(0);
public void ejbActivate()
public void ejbPassivate()
public void ejbRemove()
public void setSessionContext(SessionContext ctx)
this.context = ctx;
public byte[] getSomeDataInBytes(int testSize)
ArrayList someData = getSomeData(testSize);
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println(" serialised output size: "+byteOutputStream.size());
byte[] bytes = byteOutputStream.toByteArray();
objectOutputStream.close();
byteOutputStream.close();
return bytes;
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return null;
public ArrayList getSomeData(int testSize)
// Create array of objects
ArrayList someData = new ArrayList();
for (int i=0; i<testSize; i++)
someData.add(new SomeVO(i));
// Interlink all the objects
for (int i=0; i<someData.size()-1; i++)
for (int j=i+1; j<someData.size(); j++)
((SomeVO)someData.get(i)).addValueObject((SomeVO)someData.get(j));
((SomeVO)someData.get(j)).addValueObject((SomeVO)someData.get(i));
// print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Check the serialised size of the structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return someData;
Here is RMITestBeanHome:
package com.cramer.test;
import javax.ejb.EJBHome;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
public interface RMITestBeanHome extends EJBHome
RMITestBean create() throws RemoteException, CreateException;
Here is ejb-jar.xml:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<enterprise-beans>
<session>
<description>Session Bean ( Stateful )</description>
<display-name>RMITestBean</display-name>
<ejb-name>RMITestBean</ejb-name>
<home>com.cramer.test.RMITestBeanHome</home>
<remote>com.cramer.test.RMITestBean</remote>
<ejb-class>com.cramer.test.RMITestBeanBean</ejb-class>
<session-type>Stateful</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
And finally the application that tests the bean:
package com.cramer.test;
import java.util.*;
import javax.rmi.*;
import javax.naming.*;
public class RMITestApplication
final static boolean HARDCODE_SERIALISATION = false;
final static int TEST_SIZE = 2;
public static void main(String[] args)
Hashtable props = new Hashtable();
props.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
props.put(Context.PROVIDER_URL, "ormi://lil8m:23792/alexei");
props.put(Context.SECURITY_PRINCIPAL, "admin");
props.put(Context.SECURITY_CREDENTIALS, "admin");
try {
// Get the JNDI initial context
InitialContext ctx = new InitialContext(props);
NamingEnumeration list = ctx.list("comp/env/ejb");
// Get a reference to the Home Object which we use to create the EJB Object
Object objJNDI = ctx.lookup("comp/env/ejb/RMITestBean");
// Now cast it to an InventoryHome object
RMITestBeanHome testBeanHome = (RMITestBeanHome)PortableRemoteObject.narrow(objJNDI,RMITestBeanHome.class);
// Create the Inventory remote interface
RMITestBean testBean = testBeanHome.create();
ArrayList someData = null;
if (!HARDCODE_SERIALISATION)
// ############################### Alternative 1 ##############################
// ## This relies on marshalling serialisation ##
someData = testBean.getSomeData(TEST_SIZE);
// ############################ End of Alternative 1 ##########################
} else
// ############################### Alternative 2 ##############################
// ## This gets a serialised byte stream and de-serialises it ##
byte[] bytes = testBean.getSomeDataInBytes(TEST_SIZE);
try {
java.io.ByteArrayInputStream byteInputStream = new java.io.ByteArrayInputStream(bytes);
java.io.ObjectInputStream objectInputStream = new java.io.ObjectInputStream(byteInputStream);
someData = (ArrayList)objectInputStream.readObject();
objectInputStream.close();
byteInputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
// ############################ End of Alternative 2 ##########################
// Print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Print out the size of the serialised structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
catch(Exception ex){
ex.printStackTrace(System.out);
The parameters you might be interested in playing with are HARDCODE_SERIALISATION and TEST_SIZE defined at the beginning of RMITestApplication.java. The HARDCODE_SERIALISATION is a flag that specifies whether Java serialisation should be used to pass the data across or we should rely on OC4J marshalling. TEST_SIZE defines the size of the object graph and the ArrayList structure. The bigger this size is the more dramatic effect you get from data duplication.
The test case outputs the structure both on the server and on the client and prints out the size of the serialised structure. That gives us sufficient comparison, as both structure and its size should be the same on the client and on the server.
The test case also demonstrates that the problem is specific to OC4J. The standard Java serialisation does not suffer the same flaw. However using the standard serialisation the way I did in the test case code is generally unacceptable as it breaks the transparency benefit and complicates interfaces.
To run the test case:
1) Modify provider URL parameter value on line 15 of the RMITestApplication.java for your environment.
2) Deploy the bean to the server.
4) Run RMITestApplication on a client PC.
5) Compare the outputs on the server and on the client.
I hope someone can reproduce the problem and give their opinion, and possibly point to the solution if there is one at the moment.
Cheers,
Alexei

Hi,
Eugene, wrong end user recovery. Alexey is referring to client desktop end user recovery which is entirely different.
Alexy - As noted in the previous post:
http://social.technet.microsoft.com/Forums/en-US/bc67c597-4379-4a8d-a5e0-cd4b26c85d91/dpm-2012-still-requires-put-end-users-into-local-admin-groups-for-the-purpose-of-end-user-data?forum=dataprotectionmanager
Each recovery point has users permisions tied to it, so it's not possible to retroacively give the users permissions. Implement the below and going forward all users can restore their own files.
This is a hands off solution to allow all users that use a machine to be able to restore their own files.
1) Make these two cmd files and save them in c:\temp
2) Using windows scheduler – schedule addperms.cmd to run daily – any new users that log onto the machine will automatically be able to restore their own files.
<addperms.cmd>
Cmd.exe /v /c c:\temp\addreg.cmd
<addreg.cmd>
set users=
echo Windows Registry Editor Version 5.00>c:\temp\perms.reg
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection]>>c:\temp\perms.reg
FOR /F "Tokens=*" %%n IN ('dir c:\users\*. /b') do set users=!users!%Userdomain%\\%%n,
echo "ClientOwners"=^"%users%%Userdomain%\\bogususer^">>c:\temp\perms.reg
REG IMPORT c:\temp\perms.reg
Del c:\temp\perms.reg
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Date modified/Date Created/Date Added(timestamp) - not showing the actual date?

In finder, none of the date info seems to be accurate.
By example, I just downloaded a new app from a website (onyx in this case), todays date is Nov 13th and when I install the new app (i.e. drag and drop into Apps folders) in finder the Date modified says Nov. 1st, Date created says October 31. Should one of these columns not reflect the true date that the app actually got onto my mac? I understand that one of these clumns probably relfects the info contained within the downloaded app, but surely one column can tell me that I installed this app on November 13! The "Last opened" columns is the only "accurate" date column I have. (as I write this however, i've noticed that the 'Date Added column does say "Today").
I gues my question is what columne reflect what the file itself has imbedded in it, and what relfects the actions i've done (I.e. installed the app on Nov 13)
Any help would be very much appreciated. Note sure if this is somehting more worrisome or not, but i've had it for a while with no major issues other than frsutration of not understanding this. i'm on 10.7.2

The Date Modified column for the Applications folder itself will reflect the actual installation date. The others aren't supposed to.
(61530)

Appadmin in HA environnement not showing the same information

Hi all,
I have an uccx 7.0 SR5 HA environment. Recently I have noticed that the appadmin webpages of my two servers are not reflecting the same information. In my standby server I am not able to acces all of my applications and I can't see my telephony triggers.
It is so annoying because the appadmin webpage crashes so often in my primary server so make use of the interface in the standby server.
What could be the problem here ?
Best Regards,

I had a problem once with the admin page not responding/not loading and I believe I read somewhere that the problem could be a possible memory leak or something regarding WEB Administration (Service).
Bottom line is I restarted the service and didn't resolve anything and then I restarted the whole server and the problem dissappeared.
If I were you, I would restart the primary node first and then the secondary node.
But I would briefly check bug tool kit first.
Regards,
Octavian

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

The percentage completed UI is not showing the correct data

Hi All,
I have received complaints from one of my larger customers that a very long form we have created is not showing the correct % completed at the bottom. They get to the penultimate page (the last page only have three text boxes on) and it state that only 41% of the form has been completed.
It looks to me like the UI is not updating as the questions are being completed. Rather it waits until you move to the next page.
This is what makes our form look rubbish - you are being told that you have only completed 41% of the form only to move on to the next page and bam, you only have three more boxes to complete.
Can somebody help me out here.
Thanks,
Bill

Hi Bill;
I can take a look at your form but you are right that only the pages are accounted for in the percentage and not the form fields so it can be far off from reality. If there is skip logic in a form that can make it vary more. It is likely that it is working "correctly" (considering how we calculate) in your form but if you send me the link to your form at [email protected] I can see if it is not.
Thanks,
Josh

Iphoto and Itunes not showing the same number of photos in albums

why does the number of photos in an iphoto album is not the same when synching my iphone. For example, in iphoto, my "family" album has 2700 photos, but in Itunes it only shows 2675. I have included the videos also. Thanks

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

Email & attachments ALSO webpages--not showing the same content as computer

Having several issues...
I have (as an example) bookmarked (on my home computer) a www.weather.com link (showing radar images for my city), the bookmark was sync'd to my iPhone, and WAS working fine, however now whenever I try using the link, it is a different webpage...almost like a modified phone version of the www.weather.com site. I can use the same link on my computer, and it shows the page I want, but now on iPhone it's different. I've tried deleting cookies and cache's, but every time I go to this bookmark, a different version of the weather page come up. Almost like a 'watered down' version. How can the same bookmark get different pages on my computer and on iPhone?
ANOTHER issue... I have tried testing this by forwarding an email to myself.... I have an airline itinerary from an airline that was sent to my email (from the airline website) and it comes through as the typical formal itinerary 'look'. If I forward this email back to myself, it doesn't come across the same with the formal look, only the text format on my iPhone. BUT, it comes through perfectly on my computer. Again, same email, but viewing it on my computer show the original formal itinerary, but viewing on my iPhone is again, some kind of watered down text only format.
Any ideas??? Thanks!
Sarah

Thanks for your reply... for the www.weather.com website, I get the same result using either Edge or WiFi, even if I manually enter in "www.weather.com" and not use the bookmark, it changes to xhtml.weather.xhtml and gives me this other version, which I am assuming to be the mobile version. The mobile version appears to be faster that the 'real web' version, but I'm still wondering why this would be giving me the mobile version. It was working fine, but in the last day or so, I've been getting this mobile version....
On the other issue, with the emails... why would my messages be coming across as just text? I can forward an 'html' email from my iPhone (using Yahoo), showing the itinerary I received for my trip, with all the graphics, and when I login to my Yahoo email on my computer, I see the exact same original email. Then I go to my iphone and read the message, and it's in text format. Any ideas???
Thanks!

Same set of Records not in the same Data package of the extractor

Hi All,
I have got one senario. While extracting the records from the ECC based on some condition I want to add some more records in to ECC. To be more clear based on some condition I want to add addiional lines of data by gving APPEND C_T_DATA.
For eg.
I have a set of records with same company code, same contract same delivery leg and different pricing leg.
If delivery leg and pricing leg is 1 then I want to add one line of record.
There will be several records with the same company code contract delivery leg and pricing leg. In the extraction logic I will extract with the following command i_t_data [] = c_t_data [], then sort with company code, contract delivery and pricing leg. then Delete duplicate with adjustcent..command...to get one record, based on this record with some condition I will populate a new line of record what my business neeeds.
My concern is
if the same set of records over shoot the datapackage size how to handle this. Is there any option.
My data package size is 50,000. Suppose I get a same set of records ie same company code, contract delivery leg and pricing leg as 49999 th record. Suppose there are 10 records with the same characteristics the extraction will hapen in 2 data packages then delete dplicate and the above logic will get wrong. How I can handle this secnaio. Whether Delta enabled function module help me to tackle this. I want to do it only in Extraction. as Data source enhancement.
Anil.
Edited by: Anil on Aug 29, 2010 5:56 AM

Hi,
You will have to do the enhancement of the data source.
Please follow the below link.
You can write your logic to add the additional records in the case statement for your data source.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c035c402-3d1a-2d10-4380-af8f26b5026f?quicklink=index&overridelayout=true
Hope this will solve your issue.

Lookout WebClient Not Showing the Same data as on Server

Similar Messages

Maybe you are looking for