Loop failed on dvd but works correct in testmode

Hi,
I want to create a dvd in CS4 that plays only one track (1 minute duration) in a endless loop without any menue functionality. I use the "Import to cutting-area" ( don´t know the exact name in the english version) and drag it into the Flowchart as the start event. Then I changed the end event of the clip to chapter 1 of the same clip. This works correct in test mode and loops endless.
Then I burn the project on dvd and the clips starts playing. But nearly at the end of the clip the dvd stops and freezes. The dvd player on my mac shows me 2 chapters on this dvd and I can start the clip again using chapter 1.
What´s wrong with my project?
Thanks

Ok, now it works!
The problem was the length of the clip in the timeline. After cutting the clip to the end of the GOP it worked correct.
You can apply a chapter as the end action - works also correct.
I don´t understand why the test-mode gives no warning and the projects seems to work fine but the dvd freezes.
Thanks for the help!

Similar Messages

Re: Select statement fails under Express, but works underForte when usi

Hi there,
I have logged this with Forte and it as been recognized as a bug ( #46554 ).
The Express methods you need to look at if you want to modify this behavior
are :
1 - BusinessQuery.BuildQuery() starting at line 217
2 - SqlQuery.GetWhereText() starting at line 60
We have gotten around the problem by modifying what Express generates by
changing it from ( col1, col2 ) in ( select col1, col2 ... ) to ( col1 +
col2 ) in ( select col1 + col2 ... )
Just one thing i'm not sure that the '+' is standard on every DBMS for
concatenation.
We are using SQL Server 6.5
Hope this helps.
Christian Boult ([email protected])
Programmeur - Analyste
Influatec inc.
-----Original Message-----
From: Metcalf, Roger <[email protected]>
To: '[email protected]' <[email protected]>
Date: Thursday, May 06, 1999 1:55 PM
Subject: Select statement fails under Express, but works under Forte when
using DB2
Express sometimes (e.g. with nested windows) generates SQL with a select
subquery, e.g.
select x1, x2 from t1 where (x1,x2) in (select x1,x2 from t2.....)
This fails on DB2 with a message that the comma in the where clause (x1,x2)
is not allowed.
This works on Oracle.
Does anyone have a workaround or other suggestion?
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

joe.meszaros wrote:
(SELECT ? AS Id, ? AS UserBytes FROM dual)I suggest that you test to see if that statement and ONLY that statement works at all.
There are rules for bind variables and that statement certainly looks suspicious.
If you can't get that to work then the rest of the attempt is pointless.

Re: Select statement fails under Express, but works underForte whenusin

Roger,
This was a bug with Express and was fixed in Express E.2.0.L.0.
You might be able to get more details on Forte's website.
Ajith Kallambella M
From: "Metcalf, Roger" <[email protected]>
Reply-To: "Metcalf, Roger" <[email protected]>
To: "'[email protected]'" <[email protected]>
Subject: Select statement fails under Express, but works under Forte
whenusing DB2
Date: Thu, 6 May 1999 11:55:19 -0400
Express sometimes (e.g. with nested windows) generates SQL with a select
subquery, e.g.
select x1, x2 from t1 where (x1,x2) in (select x1,x2 from t2.....)
This fails on DB2 with a message that the comma in the where clause (x1,x2)
is not allowed.
This works on Oracle.
Does anyone have a workaround or other suggestion?
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>_______________________________________________________________
Get Free Email and Do More On The Web. Visit http://www.msn.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

joe.meszaros wrote:
(SELECT ? AS Id, ? AS UserBytes FROM dual)I suggest that you test to see if that statement and ONLY that statement works at all.
There are rules for bind variables and that statement certainly looks suspicious.
If you can't get that to work then the rest of the attempt is pointless.

Why Zinio doesn't show all issues on iPhone 4 but works correctly on ipad?

Why Zinio doesn't show all issues on iPhone 4 but works correctly on ipad?
The same issue is not present on iPhone 4 but exists on iPad
Can anyone help?

Try http://www.lemkesoft.com/ GraphicConverter.

Page is not working in serverside but working correctly in JDEV

Hi,
After deploying the page which is working propely in my local machine JDEV,
its not working same at server side. i bounced apache couple of time.
if any one faced similar issue, please share.
Thanks,
Mahesh

Pages are working fine in my loacl machine, but whn i compile pages (javacode) at server and running the pages from apps instance, pages are not working correctly. But whn I transfer the class file from local machine to server side page is working perfectly, what would be the reason.How to check the Java/JDK version
D:\>cd jdevbin
D:\jdevbin>cd bin
D:\jdevbin\bin>java -version
java version "1.3.1_01" -- Java Version on local machine
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)
On server
[apeafin19@camoraapp10 ~]$ cd $ORACLE_HOME
[apeafin19@camoraapp10 8.0.6]$ pwd
/u01/oracle/eafin19ora/8.0.6
[apeafin19@camoraapp10 8.0.6]$ cd bin
[apeafin19@camoraapp10 bin]$ java -version
java version "1.4.2_12" -- Java Version on server machine
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
[apeafin19@camoraapp10 bin]$
You can see the difference of JDK installed on server and on our local machine which can be root cause of the issue
Thanks
--Anil

Firefox Proxy Fail-over is not working correctly

I am in a corporate environment, where we must use a complex auto-proxy, by configuring an automatic proxy configuration of http://proxyconf/proxy.pac. I am seeing an intermittent failure with Firefox 3.6.13, where the same site will load after a delay in IE (e.g. it works for half an hour, then fails for a while, etc.).
By using Wireshark and tracing the packets, I have identified that a proxy server is intermittently failing, and Firefox is failing to try the second proxy. The auto proxy rule that is being invoked is:
if (!isResolvable(host)) return "PROXY 172.16.39.201:8080; PROXY 10.241.32.28:8080";
The problem is that Firefox is never failing over - it tries the 172 address 6 times in a row, then gives up and displays the "The proxy server is refusing connections" "Firefox is configured to use a proxy server that is refusing connections." "* Check the proxy settings to make sure that they are correct." "* Contact your network administrator to make sure the proxy server is working." error message. It continues with this behavior regardless of how many attempts, reloads, restarts are tried.
IE on the other hand will try and fail with the 172 address, and then start using the 10. address (which works correctly). Several other applications also work correctly, such as IRC clients.
Obviously the corporate proxy that is failing must be fixed, however Firefox is failing to utilitize the 2nd proxy after the first one fails.
Seems like a bug.
Is there some easy way for me to replace the proxy file with my own file? E.g. replace http://http://proxyconf/proxy.pac with file://c:\..., or use some add-on?
It must be an autoproxy script, as there is no single proxy that I can use for all addresses.

You can correct this issue by forcing the file blocklist.xml to update or wait until Firefox updates the file.<br />
That update will remove the severity="0" flags in the file that cause the problem.
See:
* [/questions/832793?page=2#answer-198407]
* http://forums.mozillazine.org/viewtopic.php?p=10899869#p10899869
*[https://bugzilla.mozilla.org/show_bug.cgi?id=663722 Bug 663722] - The blocklist output is including severity="0" where it shouldn't be

Fail to select subtitles on final build dvd, but works fine on DVDSP4 simul

I have a complex project, for commercial proposes.
It's include menu in portuguese and english, audio Dolby 5.1 and 2.0 and subtitles in english, espanish and portuguese.
The problem:
When I simulate it on DVD studio Pro 4, everything works fine, It looks pretty goog, but after build or format a DVD on my hard drive, I test it on Apple DVD Player, selec menu in english or portuguese and play one interview with the artist, on extras menu. Ok, but if I press menu, then go to the setup menu, and select the spanish or portuguese subtitles, when I go back to the extras menu, and play the interview again, the subtitle is english only.
Somebody help-me, I cheked all the scripts and it's ok, as much that on the simulator, all works fine.
thx,
Marcus Maia

On language menu I have two buttons that call:
Script PT (sets the menu language to português)
1 - mov GPRM 1,1
2 - Jump Aviso PT (warning screen)
Script PT (sets the menu language to english)
1 - mov GPRM 1,2
2 - Jump Aviso EN (warning screen)
On the setup menu, I have five buttons that call:
Script AUDIO_5.1 (sets audio to dolby 5.1)
1 - Set System Stream Au(Audio Stream 1)
2 - Jump menuconfigpt::button LEG_EN if (GPRM 1 = 1)
3 - Jump menuconfigen::button LEG_EN if (GPRM 1 = 2)
Script AUDIO_2.0 (sets audio to dolby 2.0)
1 - Set System Stream Au(Audio Stream 1)
2 - Jump menuconfigpt::button LEG_EN if (GPRM 1 = 1)
3 - Jump menuconfigen::button LEG_EN if (GPRM 1 = 2)
Script LEG_EN (sets subtitle to english)
1 - Set System Stream St(Subtitle Stream 1) (on)
2 - Jump menuconfig_pt::butvoltar if (GPRM 1 = 1)
3 - Jump menuconfig_en::butvoltar if (GPRM 1 = 2)
Script LEG_ES (sets subtitle to spanish)
1 - Set System Stream St(Subtitle Stream 2) (on)
2 - Jump menuconfig_pt::butvoltar if (GPRM 1 = 1)
3 - Jump menuconfig_en::butvoltar if (GPRM 1 = 2)
Script LEG_PT (sets subtitle to spanish)
1 - Set System Stream St(Subtitle Stream 3) (on)
2 - Jump menuconfig_pt::butvoltar if (GPRM 1 = 1)
3 - Jump menuconfig_en::butvoltar if (GPRM 1 = 2)
The others scripts make each video to come back to correct language menu, like these:
Script SHOW
1 - Jump menuroot_pt::butextras if (GPRM 1 = 1)
2 - Jump menuroot_en::butextras if (GPRM 1 = 2)
Script ENTREVISTA (the interview with the artist)
1 - Jump menuextras_pt::butmkof if (GPRM 1 = 1)
2 - Jump menuextras_en::butmkof if (GPRM 1 = 2)
There is all...
If you can, send your e-mail address to me and I send the project file to you.
Thx
Marcus Maia

Rich Client Login fails from Infoview but works fine if opened from desktop

Hi Friends,
When i open WebI Rich Client from my infoview (By changing the preferrance settings in Infoview), it returns an error as "Login Fails" , but if i open the webI Rich Client from my Start->Programs->Business Objects XI 3.0->WebI Rich Client , it works fine. i am not sure why invoking rich client from infoview fails, but the same works fine, if opened directly from the desktop. I have only one user "administrator" Created with no password in the Enterprise.
Configuration:
Platform:             Windows Xp
Type:                  Vertical Installation (All the servers and Presentation Layer in a single Box)
Boxi Version:     BOXI 3.0
Authentication:   BO Enterprise.
Any help in the regard is appreciated.
Regards,
Ram kumar G
Edited by: Ramkumar Govindasamy on Aug 11, 2009 9:58 AM

Hi,
Windows XP is not officially supported for a BOBJ server installation. Can you consider installing BO on a Windows Server machine?
Have a look prior to the installation at the Support Platforms document for BO XI 3.0. You can find this here:
[http://service.sap.com/bosap-support]
Regards,
Stratos

XMLSignatureFactory fails in servlet, but works in a stand-alone program.

Hi all,
I am trying to write a servlet which will do XML signature et al. For the same, I am using JWSDP 2.0 (Java WebServices Developers Pack) on JRE 1.4.2_5. The servlet is hosted on SAP Netweaver 7 platform on Windows.
I am getting an exception:
javax.xml.crypto.NoSuchMechanismException: Cannot find DOM mechanism type
in the "XMLSignatureFactory.getInstance" line. I looked up in the documentation of XMLSignatureFactory and it says that the DOM mechanism should be provided by the provider argument - org.jcp.xml.dsig.internal.dom.XMLDSigRI in this case.
import javax.xml.crypto.dsig.XMLSignatureFactory;
XMLSignatureFactory sigFactory =
XMLSignatureFactory.getInstance("DOM", new org.jcp.xml.dsig.internal.dom.XMLDSigRI());
I tried the above 2 lines in a stand-alone Java client and they work without any issues.
I also used JWSDP 1.5 and the result was same.
This means that the servlet API or container for SAP is creating some issues to make this fail.
I tried to add the "org.jcp.xml.dsig.internal.dom.XMLDSigRI" in the jre/lib/security/java.security, but then the server0 does not start-up.
Any hints/pointers to resolve this issue?
Thanks in advance.

This problem is solved. I am putting the reply here so that others who stumble upon this error can benefit.
Add the following line to explicitly include the provider before the getInstance
Security.addProvider(new org.jcp.xml.dsig.internal.dom.XMLDSigRI());
XMLSignatureFactory sigFactory =
XMLSignatureFactory.getInstance("DOM", new org.jcp.xml.dsig.internal.dom.XMLDSigRI());

Spatial index creation fails in oracle9i but works in 8i

Hi--
i'm using oracle9.0.1.2.0 and arcSDE on solaris 8
when i create a spatial feature table and index oracle gives me the foloowing error:
Extended error code(29855): ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13236: internal error in R-tree processing: [failed to cluster in memory]
ORA-13249: Internal error in Spatial index: [mdrcrclmem]
ORA-13232: failed to allocate memory during R-tree creation
ORA-13249: Error in Rtree: [mdrcrrdtbl, select /*+ PARALLEL 4 */ rid , min_d1, max_d1 , min_d2, max_d2 from (select rownum rnum, rid , m(MDSYS.SPATIAL_INDEX)
this occurs whether i use cov2sde at the command line or Create Index in sqlplus:
SQL> create index COUNTY_IDX on COUNTY_SDO(shape)
2 indextype is mdsys.spatial_index
3 parameters ('SDO_INDX_DIMS=2 tablespace=sde2_idx');
create index COUNTY_IDX on COUNTY_SDO(shape)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13249: Stmt-Execute Failure: SELECT count(*) from SDE.COUNTY_SDO
ORA-29400: data cartridge error
ORA-01116: error in opening database file 14
ORA-01110: data file 14: '/u04/oradata/GIS2/sde3_idx01.dbf'
ORA-27041: unable to open file
SVR4 Error: 24: Too many open files
Additional information: 3
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 7
ORA-06512: at line 1
the bizarre thing is that everything works tickety-boo in oracle 8i *8.1.7.3)
has anyone run across this?
cheers
--kassim

thanks for the suggestion, but that didnt work either
i increased the file descriptor limit from 256 to 2048 (my sysadmin sez that could break lots of things in solaris and had another go:
elvis{1}% ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 8192
coredump(blocks) unlimited
nofiles(descriptors) 2048
vmemory(kbytes) unlimited
lvis{2}% cov2sde -o create -l plstrfill_sdo,shape -f $GISDATA/survey.ws/plstr_fill,poly -e a -R 1 -k spatial -a file=$GISDATA/survey.ws/plstr_fields.txt -g SPIDX_RTREE
ArcSDE      8.2      Build 115 Wed Mar 6 09:48:27 PST 2002
Coverage to Layer Loading      Administration Utility
Reading column selection file "/data/jack02/in_put/survey.ws/plstr_fields.txt"
Library /data/jack02/in_put/survey not found.
Unable to open library "/data/jack02/in_put/survey"
Loading feature class/subclass "poly"
from Coverage "/data/jack02/in_put/survey.ws/plstr_fill"
sde_layer_plstrfill_sdo: plstrfill_sdo is in LOADONLY mode
Imported 158399 features into SDE plstrfill_sdo,shape from coverage /data/jack02/in_put/survey.ws/plstr_fill,poly
SDE Error(-51) Underlying DBMS error
Extended error code(29855): ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13230: failed to create temporary table [M2_8496$$] during R-tree creation
ORA-13249: Error in stmt: CREATE TABLE M2_8496$$ NOLOGGING tablespace SDE_IDX STORAGE (initial 4096K next 4096K pctincrease 0 maxextents unlimited) as (select rid , min_d1, max_d1 , min_d2, max_d2 from M0_8496$$ a, (select (min_d2+max_d2) value fro(MDSYS.SPATIAL_INDEX)
Not able to set layer into Normal-IO mode.
Cov2SDE completed.
No libraries currently set.
SQL> create index plstrfill_idx on plstrfill_sdo(shape)
2 indextype is mdsys.spatial_index
3 parameters ('SDO_INDX_DIMS=2 tablespace=sde4_idx');
create index plstrfill_idx on plstrfill_sdo(shape)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13230: failed to create temporary table [M2_84A5$$] during R-tree creation
ORA-13249: Error in stmt: CREATE TABLE M2_84A5$$ NOLOGGING tablespace SDE4_IDX
STORAGE (initial 4096K next 4096K pctincrease 0 maxextents unlimited) as
(select rid , min_d1, max_d1 , min_d2, max_d2     from M0_84A5$$ a, (select
(min_d2+max_d2) value from M0_84A5$$ where rowid='AAAISqAAPAAACCYABK') b where
(((a.min_d2+a.max_d2) < b.value) or (((a.min_d2+a.max_d2) = b.value) and (a.rid
<= 'AAAISeAAJAAAnvnAASZ'))))
ORA-13230: failed to create temporary table [M2_84A5$$] during R-tree creation
ORA-29400: data cartridge error
ORA-00210: cannot open the specified controlfile
ORA-00202: controlfile: '/u01/oradata/GIS2/control01.ctl'
ORA-27041: unable to open file
SVR4 Error: 24: Too many open files
Additional information: 3
ORA-06512: at "MDSYS.SDO_INDEX_METH
this is really killing me
my oracle is setup following the esri and oracle guidelines:
all our tablespaces are with UNLIMITED extent and maxsize on
any files. All the tablespaces follow Oracle9i best practices
such as OFA, SAFE, and SAME including Temporary Tablespace.
any suggestions would be realy helpful
--kassim

Why did DST change fail on iPad but work on iPhone?

I have an iPhone 4S and an iPad 4, both running 8.1. Both devices are on AT&T data plans and seem to be working just fine except for this one annoying difference. I was in Central TZ (Austin, TX) during the DST change over but am now back in EST.
My iPhone saw the change immediately and corrected itself to the proper DST time. My iPad still is an hour off and continues to ignore the DST change. Both devices have been on multiple cell networks across TX, NC and VA as well as multiple wireless networks during that time. Phone is right, iPad is not.

You know ... when one goes through the support documents and other users' suggestions ... and one still can't find a solution, you've always got APPLE SUPPORT. That's what they're there for ... :-) ...
Apple Support
http://www.apple.com/support/
Apple Retail Store - Genius Bar
http://www.apple.com/retail/geniusbar/
Contacting Apple
http://www.apple.com/contact/

No audio in DVD but works fine in simulator

Hi,
I've made hundreds of DVD's with DSP but now a problem I haven't encountered before occurs. This DVD is super simple. It only plays a track on first play. In the simulator it works fine. Audio and Video, it's all sync etc. When I build the .IMG file and view it with VLC, there's no sound. Same result when I burn it on a DVD. Does anyone have a suggestion? Thanks.
Sound = 44.1 kHz PCM uncompr, 'made' with compressor, strange enough DSP sees it at 48 kHz
DSP 2.0.5

Hi Thanks for your replies. The audio was OK and the format shouldn't be any problem for DSP. Now, the problem appeared not to be in DSP. I checked the VOB file separately and it was muxed OK. VLC apparently cannot read the audio part of the this .img file and the DVD player I used had an audio problem. Checked it on another DVD player and it worked fine. Thanks again for thinking with me. Cheers, T.

OSS note is not working in production but works correctly in test system .

hello friends ,
weh have implemented one OSS notes , which is working corectly in Test system , but not working in production .
Could you please let me know , what could be the reason ?
OSS note no 1064273-
Regards,
Manoj

Pls. check with Basis if the OSS note has been implemented properly and successfully.

I have a small code that fails in FF but works in ie and chrome

Following is a pop up which fails in FF. works fine in ie and chrome
<pre><nowiki><a href="audioplayer.php" onClick= "window.open('audioplayer.php?
mkt=xyz.mp3','myWin','width=430, height=100');return
false"><img src="img/audioicon.jpg"></a></nowiki></pre>

A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

Select statement fails under Express, but works under Fortewhen using

Express sometimes (e.g. with nested windows) generates SQL with a select
subquery, e.g.
select x1, x2 from t1 where (x1,x2) in (select x1,x2 from t2.....)
This fails on DB2 with a message that the comma in the where clause (x1,x2)
is not allowed.
This works on Oracle.
Does anyone have a workaround or other suggestion?
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Here is a fix to this problem I found. Not sure if it will help:
1. Go to directory $TNS_ADMIN on database tier or database home.
2. Modify sqlnet.ora file with following.
tcp.validnode_checking = yes
Either set above directive value to NO or add machine name where jdeveloper is running to following directive.
tcp.invited_nodes=(machin-name, machine-name)
3. Bounce listener using addlnctl.sh under database directory.

Loop failed on dvd but works correct in testmode

Similar Messages

Maybe you are looking for