Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your
Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your iphone backup file". This is very frustrating
I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.
Similar Messages
-
Hi i have an ipod 4th gen. the problem is when ever i try to sync my iPod to my computer a mesage comes up and says that the ipod can't be backed up. There wasn't a problem until I upgraded the software. How do I fix this??
Try here:
iOS: Troubleshooting backup issues in iTunes -
When I originally downloaded iTunes my iPhone would sync to my computer when I connected the USB plug. Now it won't do it. I removed iTunes from my computer and have attempted to re download iTunes to no avail. I get several error msgs during the download: msvcr80.dll was not found; iTunes was not installed correctly, error 7; Windows error 126; Service 'Apple Mobile Device' (Apple Mobile Device failed to start)
Can anyone offer any suggestions/help?Hello there, Cyn.
The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
when trying to upload photos it says "The itunes photo processor was installed incorrectly error 7" help me pleasee
Have you tied uninstalling and reinstalling iTunes?
-
I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.
Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.
-
When I plug my iPhone into my iMac via USB I can choose to "back up to this computer". On another sync to my iMac, can I choose to " back up to the iCloud"? This way I could restore all my info and settings from either source. Is this possible?
On the phone, under Settings > iCloud you can select to turn iCloud ON or OFF.
One iTunes, it senses that toggle and if you had selected iCloud it will say backup to iCloud. Here you can change the toggle to backup to computer and click "Apply" prior to syncing.
I do both for good measure. I backup to computer and then after i disengage the device from the computer, I set the iCloud toggle back to ON and then perform the iCloud backup over wifi.
I found that using iTunes and saying to backup to iCloud isn't always successful in the "last backed up" time and thus I do it separately. -
When I plug my iphone into the computer to restore it I receive a "network connection timed out" message. However, when I plug in other iphones or ipod touches I can connect fine. Any help would be appreciated.
Try a powered external USB hub. It uses a 120V AC wall jack to power USB devices, and the Mac only needs to provide *just enough* to comminucate. Best Buy, Target, Walmart, ... about $20.
-
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
When I plugged my iphone into the computer for the first time i lost all my music and ringtones. Is there a way to get them back without buying them again, or will I have to buy them again.
Download the free app My Contacts Backup and use it to back up the contacts on your device now (it will back them up as an attachment to an email that you send to yourself). Then restore your device to your most recent backup to see if it will recover your contacts. If not, if necessary you can open the email and tap the attachment to re-import the contacts you have now back to your device.
If you need to restore to an iCloud backup this has to be done in the initial setup process, which requires you to first erase your device. If you have any more recent data on your device now that is not in the backup that you want to save you'll need to do that first. Then go to Settings>General>Reset and tap Erase All Content and Settings. You will then go through the setup screens on your device, and when given the option, choose Restore from iCloud Backup (see image below). Be sure you are connected to wifi and your charger as this will take some time to finish. -
Im trying to import a large amount of pictures to Iphoto. I have pleanty of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?
I. I want to import 58.64 GB of Photos from an external HD
2. I have 278.28 GB space left on my HD
3. The exact error message goes like this......
Insufficient Disk Space
iPhoto cannot import your photos because
there is not enough free space on the
volume containing your iPhoto library
I Have researched this and most advice is to empty the iPhoto trash. I have already done this and it did not help.
Thank you for helping -
When I go to burn a CD I have it in a playlist and hit burn to disc a error message comes up and says disc burner or software not found. How do I fix this for Windows vista.
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Gateway M-2626U
iTunes 10.2.2.14
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DAE0803978170
Current user is not an administrator.
The current local date and time is 2011-06-07 21:32:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3200 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.2.2.14 (x64) is currently running.
iTunesHelper 10.2.2.14 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly. -
my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible
i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!! -
I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
I have the latest version of iTunes. When I plug my iPhone into the computer, it never comes up under the "Devices" tab in iTunes. How can I perform a restore/backup if it won't come up under "Devices" ?
See:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows -
I got a new computer and need to down load the desktop application to be able to plug my Iphone into for updates. where can I go to get this application?
Click Itunes at the top of this page and download itunes.
Maybe you are looking for
-
How to determine specific row in table clicked on
Hello - I need to determine the specific row of a table control that is right-mouse-clicked on. I think this is only possible by using the Shortcut Menu Activation? event for the table control and obtaining the vertical coordinate in the Coords filt
-
Fading between multiple customer comments - scalability issue
I am completely new to Flash and have been learning about alpha tweening to fade one .jpg image (of a customer's happy comment) to another. This works fine if I only have a small number of comments, but modifying each and every stage of the transiti
-
Calling Workflow background process' explicitly in pl/sql code
Hi All, We have a requirement where we have to call the 'Workflow background process' explicitly in pl/sql code. What we want is that we are having some request that runs via a concurrent program, but before that request completes we want to put that
-
Hello to everyone, I have a problem when I try to compare dates between two related VO with a master-detail relationship. For the child VO, in the date field I created a business rule and made it Greater than VO attribute - of the parent VO. The prob
-
BUG 1.5 : Can't create package body.
I'm getting this stack dump in the console trying to create a package body. I'm logged in as a dba. executed 'alter session set current schema=x'; created package in the worksheet. opened package from Other users|x|packages. Edited and compiled packa