Lost prompt to update pages that use template..

Yes I know I should not use templates but I do on very small sites with under 10 pages. When making adjustments to the templates I used to get a prompt asking me if I want to update pages that use that template, but I no longer get that. I must have changed something but I am wondering how I can change it back. I can manually update but I always forget and I do not wantto go that route....anyone know how I can get that prompt back to update pages that use template? Thanks much!

Well you have suggested SSI's before instead Murray....
No, I've suggested SSI's instead of Library items, or a combination of SSI's and a template instead of nested templates, but I've never suggested using SSI's instead of templates, although it is a workable solution.
I dont think it matters what I have in the code. It used to prompt me whenever I changed ANYTHING and had to save.
I do. However, try this simple test -
1. Create a new, blank HTML file.
2. Save it with FILE | Save as Template... (verify that the page is saved in the "Templates" folder)
3. Spawn a new child page from this template with FILE | New > Page from Template.
4. Save this page with any name you prefer.
5. Return to the template page and change the title from Untitled document to "Whatever". Save it. Are you prompted? You should be.
If you are not prompted then there is something systemically wrong with your DW installation.

Similar Messages

Updating pages that use templates takes forever!

All I often have to update pages based upon template changes,
and I have a huge site 10,000 pages, it take dw forever to look
through evryhting, to find the corect pages. Is there anyway I can
specify what folder to find the pages rather then it looking
through the whole site?
thanks!

The maximum practical site size for which a *Templates ONLY*
approach makes
sense is about 100 files. You are 100 times greater than
that.
Unfortunately, you are now stuck. The best thing you can do
is to slowly
work your way out of Templates and into server side includes
instead.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"missymonolo" <[email protected]> wrote in
message
news:gd82j2$cgb$[email protected]..
> All I often have to update pages based upon template
changes, and I have a
> huge
> site 10,000 pages, it take dw forever to look through
evryhting, to find
> the
> corect pages. Is there anyway I can specify what folder
to find the pages
> rather then it looking through the whole site?
> thanks!
>

Problem updating pages that use .dwt file

So i have 45 files that all use the same .dwt file. Usually when I make a change to the template and go file > save it asks me if i want to update all pages that use that specific .dwf file. For some reason it doesn't show the pages that do. Although if I go to the specific page for example contact.html and do a Modify > Templates > Apply template to page, it applys the changes, and then once i make a change to the .dwt file and do the File > Save, contact.html now appears in the section of files to be updated. I do not want to go thru every page and manually apply the template does anyone have any information that could help me out? thanks
G8ofH8

I do not want to go thru every page and manually apply the template does anyone have any information that could help me out?
However, that would work.
It sounds like your site cache has become corrupted. Try the following -
1. Open DW's Site manager, select the site name, and click on EXPORT (make sure you opt to export the FULL site defintion including FTP info)
2. Export the site definition to a KNOWN location on your hard drive
3. With the site name still selected in Site manager, click REMOVE to remove that site from your list of definitions
4. Import the site definition you just exported - that should solve the updating problem
Does this heal things for you?

Any way to turn off errors when updating pages from the template?

I'm using Dreamweaver MX. My site is huge. It's an intranet
spanning dozens of departments. Some of those departments have
subsites that don't fall under the intranet's control, although
they are embedded within our site's folder structure. When I make a
change to the template and update pages, every time I hit one of
those subsites I get tons of errors, from "template not found" to
"unmatched body tag". The errors that pop up each have to be
clicked on before the updating can continue. I get hundreds of
these.
Is there any way to make errors not pop up while updating
pages from the template? Or even to exclude certain folders from
being checked? (Cloaking doesn't do it.)

> I'm using Dreamweaver MX. My site is huge.
Both of these are problems, I'm afraid. Combining that with
templates is
really trouble.
> "unmatched body tag".
Errors such as this are definitely caused by errors in your
page itself.
Can you show me a page where you would get this?
> Is there any way to make errors not pop up while
updating pages from the
> template? Or even to exclude certain folders from being
checked? (Cloaking
> doesn't do it.)
Valid code will not produce these errors. Unfortunately, the
only way to
avoid them is to remove any validation hiccups from your
pages.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"abna" <[email protected]> wrote in message
news:f14ue2$pk5$[email protected]..
> I'm using Dreamweaver MX. My site is huge. It's an
intranet spanning
> dozens of
> departments. Some of those departments have subsites
that don't fall under
> the
> intranet's control, although they are embedded within
our site's folder
> structure. When I make a change to the template and
update pages, every
> time I
> hit one of those subsites I get tons of errors, from
"template not found"
> to
> "unmatched body tag". The errors that pop up each have
to be clicked on
> before
> the updating can continue. I get hundreds of these.
>
> Is there any way to make errors not pop up while
updating pages from the
> template? Or even to exclude certain folders from being
checked? (Cloaking
> doesn't do it.)
>

Pages that use flash freeze up in mavericks.

When viewing a page that uses a flash plug-in, the page will freeze after a few seconds of inactivity by me. It will start again if I touch my mouse or track pad over the area, but that's no solution. That's terrible.
I thought maybe it was a new setting, and I unchecked the option to stop plug-ins to save power when possible, but that didn't do anything.
This isn't ruining my life or anything. I'm just playing little flash games like Adventure Quest, and zOMG, but it's irritating.
Thank you for reading.
What is the solution?

Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.
3. Check whether you are currently in YouTube HTML 5 trial.
     http://www.youtube.com/html5
    At the bottom left of the page uncheck the box beside
   "You are currently in the HTML5 trial".
4. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the boxes beside all items.
    Check the box beside "Remove all website data".
    Click "Reset".
5. Turn off Extensions, if any.
    Safari > Preferences > Extensions
     Now try YouTube.
Best.

Hidden Report Viewer Confiugration Error on aspx pages that use report viewer web control

I try to fix the problem. The error below is embedded on aspx pages that use report viewer web control. Please note that the div element is hidden, and the reportviewer is displaying correct contents.
Div element hidden on aspx page
<div id="ReportViewer1_HttpHandlerMissingErrorMessage" style="border-color:Red;border-width:2px;border-style:Solid;padding:10px;display:none;font-size:.85em;">
<h2>
Report Viewer Configuration Error
</h2><p>The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.webServer/handlers section for Internet Information Services 7 or later.</p>
</div>
I tried adding the two elements to web.config, but to no avail.
Add below to system.web/httpHandlers
<add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
or add below to system.webServer/handlers for Internet Information Services 7 or later.
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
The required assemblies below are installed under C:\Windows\assembly folder. I have installed both Microsoft ReportViewer 2010 Redistributable, and 2008 SP1.
Microsoft.ReportViewer.WebForms, version 10
Microsoft.ReportViewer.Common, version 10
Below is the whole web.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration>
<connectionStrings>
<add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
</connectionStrings>
<appSettings>
<add key="car" value="myCar" />

</appSettings>
<system.web>
<httpHandlers>
<add verb = "*" path = "Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />

</httpHandlers>
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.ReportViewer.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.Build.Framework, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</buildProviders>
</compilation>
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<membership>
<providers>
<clear />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear />
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/" />
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear />
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
<add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
</providers>
</roleManager>
<pages>
<controls>
<add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" />
</controls>
</pages>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
<validation validateIntegratedModeConfiguration="false" />
<handlers>
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</handlers>
<httpProtocol>
<customHeaders>
<remove name="X-Powered-By" />
</customHeaders>
</httpProtocol>
</system.webServer>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="WebService1Soap" />
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:58269/WebService1.asmx" binding="basicHttpBinding"
bindingConfiguration="WebService1Soap" contract="ServiceReference1.WebService1Soap"
name="WebService1Soap" />
</client>
</system.serviceModel>
</configuration>
Any idea?
Update:
IIS is7.5, AppPool is Integrated.
I have tried below, none of them works:
1) Add it only to system.web\httpHanders. Changed AppPool to classic, still got hidden error.
2) Add it only to system.webServer\handlers. Integrated mode,still got hidden error.
3) Add both to both element. Integrated mode, still got hidden error.

Hi Kingofwebguru,
According to your description, when you use reportviewer control, you got the error message: The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file.
To troubleshoot the problem, please refer to the following steps:
Click Start, click Run, then type InetMgr.exe and click OK.
Click plus sign next to server name to expand it.
Click Application Pools in left pane.
In Application Pools list, click DefaultAppPool.
In the Actions pane, in Edit Application Pool section, click Edit Settings to check the Pipeline mode.
Configuration settings for the HTTP handlers are specified in the system.web/httpHandlers element and the system.webServer/handlers element. of your application Web.config file. The handler specified in system.web/httpHandler is used by Internet Information
Services (IIS) 6.0 or IIS 7.0 in Classic mode, whereas the handler specified in system.webServer/handlers is used by IIS 7.0 in Integrated mode. To use IIS 7.0 in Integrated mode, you must remove the HTTP handler in system.web/httpHandlers. Otherwise, IIS
will not run the application, but will display an error message instead.
For more information about Web.config Settings for ReportViewer, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms251661.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

I have a web page that uses a library item( !-- #BeginLibraryItem "/lib/topnav_main.lbi" -- ) . I

I have a web page that uses a library item(  ) . I have made a change to topnav_main.lbi but don't know how to get it updated to the web page . It is a heading and is used in many places. Can you help me?

For websphere specific questions you might try:
http://www.websphere-world.com/
and the
ibm.software.websphere.application-server.*
newsgroups.
Regards,
S. Bro

Updating nav data using Templates in one go

Can anyone advise me on this: i have a large site with hundreds of HTML files that use one of four different Templates, all of which use the same Navigation ul tags (as produced by Project Seven's Pop Menu)......
often, I want to update all the files that utilize that nav data, and as you know, DW's template feature update will agreeably update them all, automatically. However, my issue is in collecting all the differnet HTML files, which all reside in different folders at the root level of my site, and put them all to the server in one fell swoop. The synch capability of DW is great but (as far as I can tell) it only gives me a complete list of those filesa affected by the update, without distinguishing between HTML and all others.
(I like to use the 'index' designation on many subroot level HTML docs, and put them into separate folders, such that the URL need not have the extension HTML when giving the link to someone. But that means all the ifles are in different folders.
is there a way to tell DW to 'find " all the files that are HTML, that have been updated by the Template change and then 'put' them to the server in one go........?
I'd be most grateful........
todd

Doing all this via DW Templates is a maintenance chore.
Edit the navigation in the Template, let DW update all Child pages then upload all changed Child pages. For every single edit. Painful.
Have you thought of setting up your navigation as a Server Side Include instead? It's far quicker and much more efficient than DW Templates.
http://www.projectseven.com/products/menusystems/pmm3/tutorials/site-wide/includes/
Then you can avoid all the Template editing, child page propagating and uploading.

Have you noticed the newest version 3.6.23 crashes frequently? Mine does it a few times a day on web pages that used to work fine before the upgrade.

Since the last Firefox update was installed on my system, Firefox crashes several times a day on websites that used to be no problem. I have five crash report id's from the last two days (I usually don't send the report). Do you want all of them?
I'm running Firefox 3.6.23
I'm running MacOS X version 10.5.8, on 1.5ghz powerPC G4
with 2gb memory and over 100gig still available on my 150gig hard drive.
I checked for updates - there are no new updates.
I tried sending feedback, but the feedback page said I had to be running the latest version of firefox. So I clicked on "latest version of Firefox", and got "Unfortunately the latest version of Firefox isn't compatible with your computer's operating system"
The "learn more" link took me to http://www.mozilla.org/en-US/firefox/4.0/system-requirements/ which says that OS 10.5 is supported.
So - how do I get back to my previous version of Firefox so it doesn't keep crashing
AND/OR
Is there a fix coming to stop all the crashing
AND/OR
What do I do about Firefox versions on my computer?
Thanks

That can be a problem with a plugin, possibly Java.
* [https://bugzilla.mozilla.org/show_bug.cgi?id=573055 bug 573055] - Reproducible [@ nsNPAPIPluginInstance::InitializePlugin()] crashes / Java

Updating Pages with a Template

I need to update some links in an uneditable region of a
template. When I save the changes and update the files that use
that template, it makes the changes to some of the files in the
site, but not others. The files that are updated/not updated seem
to be chosen pretty much at random. I tried updating all of the
files in the site, but that didn't work.

Recreate your site cache with "SITE | Advanced > Recreate
Site Cache" and
see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"bernard825" <[email protected]> wrote in
message
news:f56cuh$mf5$[email protected]..
>I need to update some links in an uneditable region of a
template. When I
>save
> the changes and update the files that use that template,
it makes the
> changes
> to some of the files in the site, but not others. The
files that are
> updated/not updated seem to be chosen pretty much at
random. I tried
> updating
> all of the files in the site, but that didn't work.
>

App Store prompts to update apps that aren't installed, with wrong AppleID

Alright folks, I replaced a 3.5" HD in an iMac with a 2.5" SSD. To clone the data over to the new drive I used Carbon Copy Cloner. A fine tool I must say.
They took the iMac back to the business and fired it up and have been using it except for a strange problem.
The App Store keeps prompting for updates to software that is not installed on their iMac, and it asks for my AppleID password.
Today it happened with Pixelmator. I have Pixelmator on my MacBook Pro, I didn't install it on their iMac. It is not present on their iMac. I did not sign in with my AppleID on their iMac either. There is no reason for my AppleID to show up on their iMac at all!!
Steps we've taken.
Checked to see if the App Store is signed in under their AppleID. It is signed in under their ID.
Signed out of the App Store and signed back in, same thing.
Restarted, redid steps 1 and 2.
Checked "Internet Accounts", "iCloud" and "App Store" in system preferences. My ID is not in any of these preference panes.
Please give me some advice! Any idea where I should start?

Your Apple ID is encoded in OS X and any Mac App Store apps that you have bought. If you cloned your drive to the Mac, that is why your Apple ID is associated with that Mac. The Mac needs to be handled at this point as a 2nd hand Mac.
Preparing a 2nd Hand Mac for use -
You need to erase the HDD, reinstall the version of OS X that shipped from the factory on the Mac and then set it up as new with your own Apple ID.
User Linc Davis explains how a new owner can prepare a 2nd hand Mac for their own use.
https://discussions.apple.com/message/25468326

Pages-when using template for envelopes can you import names/address from address book

When using templates for envelopes can you import names/address from the address book?

Drag the VCard from Address Book onto the open envelope template.
If you want mutiple addresses make a Group of those in Address Book and drag the Group icon onto the Pages template.
Peter

HT201314 I want to remove older updates from APP Store update page that will not install because they are not compatable with my OS Version 10.8.5

There are a couple of updates on my APP STORE page that are extremely annoying, they can't be installed because they are to old for my OSX version 10.8.5, I want to delete or remove them so that Spotlight stops telling me that I have 2 updates to install, when they can't be installed unless I revert to an older OS version.
Mac Pro 2010, Dual 2.4 GHz Quad-Core Intel Xeon, 26 GB 1066MHz DDR3,

Try:
Hide and unhide purchases in the Mac App Store - Apple Support
This is another thing to look at (see number 5):
https://nicolamonaca.wordpress.com/2014/01/22/how-to-hide-a-software-update-in-t he-mac-app-store/

Tracking pages that use color/inks?

For those of you who produce projects in InDesign where some pages have color (or spot inks) available and others don't, what methods do you use to keep track?
Anything clever?
Generally speaking, for our tabloid newspaper that's imposed 4-up, we just track it on paper and hope that nobody screws up, and don't make any attempt to track it in InDesign. (For instance, a 16-page paper will probably have CMYK on pp. 1,8,9, and 16. And maybe also on pp. 3, 6, 11, 14.)
I don't expect InDesign to do the math for me, but once we've decided, I wonder if we should try harder to track it. For instance, we could color pages in the pages panel, but that's fairly subtle. We could add some non-printing markers on the page and/or pasteboard, such as a big colored rectangle behind the entire page. We could do any of the above on master pages and have seperate master pages for the color pages.
(Having seperate master pages for the colored pages seems like a good idea. It's not something we do right now, I guess, because there is no substantive difference in the recurring elements on pages that have color.)
What do you do? Either in books or newspapers or other forms of print?
What works and what doesn't work?
What do you wish you could do?
I worry that anything I've thought of so far is either too visible or too in-visible. Hmm, maybe a subtle transparency-like grid?

Hmm, I didn't mean to anchor this question too firmly in newspaper-space. What drove the query was production of an 8x10 32-page magazine. Like Peter, we don't have too much trouble keeping track when its the newspaper, or perhaps it's because we have workflows that are well-adapted to figuring it out early. When we have fewer design constraints, suddenly it becomes more important.
Peter wrote:
For a book I did recently that was printed digital I ended up making a preflight profile that doesn't allow CMY or spot plates. It throws a warning with a link to a location, so I can just go through the list and make sure that I really intended to have a color page.
Hmm. I guess checking after-the-fact is one way to go. I feel like we do a reasonable job with that, but I think we're 100% on catching any such screwups at the final proofing stage, it's just that we'd love to catch them earlier and have an easier way to tell in advance. Especially when our FPO photos tend to be color, which means b/w layouts will look color initially, so confusion is easy.
Uwe:
I notice you've provided a theoretical answer; while that's interesting, I would like to hear more about what you actually do.
If working with single side pages one could imagine a script that constantly checks the layout window(s) for specific page names and would apply a greyscale color profile to "View/Proof setup/custom…" if on specified greyscale pages and a CMYK color profile if on specified color pages.
I'm under the impression that greyscale color profiles don't work in InDesign. Do you have a workaround for that?
That's an interesting way to go. I don't normally work in Proof Colors mode I wonder if there's a performance penalty.
And yeah, lack of facing pages support seems a definite problem...
For facing pages we need a marker element that indicates "color page" or "greyscale page".
It should be an object dependent on a specific page name and not part of a specific page or its content (to be idependent when shifting pages around). I see no concept in InDesign to achieve this automatically in a constant way.
I'm not too worried about how to have the page adornment be automatically implemented; I'm more interested in what kinds of page adornments people use and might be effective. At the end of my question, I suggested "Hmm, maybe a subtle transparency-like grid?" and I did run with that a little bit last night:
I figured that a square grid too strongly screamed TRANSPARENCY so I'd try a hexagon grid. Unfortunately I don't think there's a great way to 2-color a grid of hexagons, and my first shading attempt doesn't work too well at the 10% opacity that is at. Still, I think it might be a workable way to go. But it might be too distracting. Not sure...
Maybe a startup script that interacts when page names are changing or pages are shifted around is doable.
I don't think it's too tough for a script in the idle loop to notice when pages are changing and to, say, change which master page is applied or pop up a dialog noting that. But I think I'm more interested in the UI for the designer once the pages are set, rather than the interface for changing the adornments. Because if I can't come up with a useful adornment, the rest doesn't matter.

JSP on BEA Weblogic: random error when loading a jsp page that uses a Bean

Hi!
I wrote a simple jsp page that stores a String in a JavaBean, and then forwards to another jsp page to display that String. The jsp pages are deployed on a BEA Weblogic 6 Server, but I get a weird behaviour when loading the page into my browser. Usually I get an error message:
/Response.jsp(9): class 'query.jsp.QueryBean' could not be loaded
probably occurred due to an error in /Query.jsp line 9:
<jsp:useBean id = "queryBean" scope = "request" class = "query.jsp.QueryBean" />
But the funny thing is that after reloading the page a few times it eventually works. The bahaviour seems to be totally random - sometimes it works, sometimes it claims not finding the JavaBean class.
Anyone experienced something similar?
Thank you very much,
Charlie

Is QueryBean.class located under '<appname>/Web_inf/query/jsp/'?
If it is please try changing the package name to something else like com.myclass or something like that.

Lost prompt to update pages that use template..

Similar Messages

Maybe you are looking for