LOV on user defined input values
Hi
I have created an element and created an input value of Description.This input value 'Description' will contain 2 or 3 criterias like 10% Basic,20%Basic and 30% Basic. To Reduce data entry and minimize spelling mistake i was looking to put this description in lov so that user can select from list instead of typing each time.
How can this be done.
Regards
read the online help of the element type screen. It tells you how to use an application lookup, or a value set to populate the LOV.
Similar Messages
-
User defined field values doesnot show up in summary tab
Hi,
I have created my own stylesheet to display some of my user defined field values (associated with organization address book entry type) in the summary tab of the addressbook entry. But Groupwise 8.0 client FAILS to display any of the user defined field values in the summary tab FOR ONLY ORGANIZATION ADDRESSBOOK ENTRY types. NOTE: These organization addressbook entries are created using the C++ Groupwise object API. But the Advanced tab of these organization addressbook entry shows those user defined fields with values in it.
Also Groupwise 8.0 Client is able to display the user defined field values in the summary tab for the PERSON ADDRESSBOOK ENTRY types, that are created using the Groupwise Object API. Also when I create a Organization addressbook entry using the Groupwise Client (NEW ORGANIZATION) and fill in the user defined field values using the Advanced tab or that addressbook entry, the summary tab displays those user defined field values.
So there could be some problem in setting the user defined field value for the Organization address book entry using the Object API or it could be Groupwise 8.0 Client issue in displaying the user defined field values ONLY FOR ORGANIZATION ADDRESS BOOK ENTRY, WHICH ARE CREATED USING THE OBJECT API. I also tried to see the underlying XML data in the summary tab and that XML data is missing the USERDEFINEDFIELDS and CATEGORIES tag for the organization address book entry.
I would like to know, if there is any need for special handling only for Organization addressbook entry in Groupwise 8.0 API. Any thoughts or help is really appreciated.Hi,
Does anyone have an idea?? Think I have the same issue. Except, when I log in the client (ver. 802) then all the info is displayed. But when the user logs in on the same client and the same pc, he sees the xml info except the office address.
Any help is greatly appreciated!
Grtz,
Joost Brenters -
Hi,
i Created an add-on on VB.net code.I have an user defined field.when i try to COPY TO Return or A/R Invoice the user defined field value is not pushing into the field.
could you help me .
Thanks
RaviHi Ravi
if it is a document header level
oForm = SBO_Application.Forms.ActiveForm
oItem = oForm.Items.Item("uf_id")
oEdit = oItem.Specific
oEdit.Value = "value"
OR
it is a document row level
oForm = SBO_Application.Forms.ActiveForm
oItem = oForm.Items.Item("38")
POMat = oItem.Specific
POMat.Columns.Item("UF_id").Cells.Item(i).Specific.value ="value"
try this it will workout
vijju -
Web Logic Optimize the User-defined typed values
I'm using Together Soft 6.0.1 and Web Logic 7.0 as apps. server. I'm writing
the web service using the user defined type as input parameter and return status.
I'm experience the following probem
1. On the web service, the return status is an array user-defined data type.
Some of the data has the same values.
2. When I looked at the SOAP/XML message as the returned status, the fields/tags
that have the same data got mapped to a href=#ID_x and on the bottom of the SOAP/XML
message the ID_x is mapped to the correct data value.
3. However, when the SOAP/XML message is mapped to the client's object, the data
did not get mapped correctly to the object's attribute. The attributes, that
got mapped to href=#ID_x, are set to empty value.
I wrote the serialize/deserialize code for the User-Defined type, and that works
ok. However, when I return an array of User-Defined type, and only have the serialize/deserialize
code for the User-Defined type but no code for the array, it throws an exception
(Array out of bound).
It looks like Weblogic creates a reference table appended to the message with
duplicate values indexed. Is it some kind of performance option you can turn
off?
Or is there some interface to retrieve the references?
Or is there a work around or a fix to this problem?
Or do I have to write the serialize/deserialize codes for the user-defined type
and array of user-defined type?
Thanks for your help,
MichelleScott,
Thanks for your response.
So you're saying the href "optimization" is a feature of soap encoding. Is it
the Web Logic implementation of soap encoding optimize the values?
If we write xxxCodec.java for the array of user-defined type, will it work?
If it does, could you send me sample code? The example in the document is for
a single class. The array seems to be more complicated.
Thanks for your help,
Michelle
[email protected] (Scott Ziegler) wrote:
I would suggest using a document-literal style webservice. The
literal part avoids soap encoding which is responsible for the href
"optimization".
--Scott
In article <[email protected]>,
Michelle Hoang <[email protected]> wrote:
I'm using Together Soft 6.0.1 and Web Logic 7.0 as apps. server.
I'm writing the web service using the user defined type as input
parameter and return status. I'm experience the following probem
1. On the web service, the return status is an array user-defined
data type. Some of the data has the same values.
2. When I looked at the SOAP/XML message as the returned status, the
fields/tags that have the same data got mapped to a href=#ID_x and on
the bottom of the SOAP/XML message the ID_x is mapped to the correct
data value.
3. However, when the SOAP/XML message is mapped to the client's
object, the data did not get mapped correctly to the object's
attribute. The attributes, that got mapped to href=#ID_x, are set to
empty value.
I wrote the serialize/deserialize code for the User-Defined type, and
that works ok. However, when I return an array of User-Defined type,
and only have the serialize/deserialize code for the User-Defined
type but no code for the array, it throws an exception (Array out of
bound).
It looks like Weblogic creates a reference table appended to the
message with duplicate values indexed. Is it some kind of
performance option you can turn off? Or is there some interface to
retrieve the references? Or is there a work around or a fix to this
problem? Or do I have to write the serialize/deserialize codes for
the user-defined type and array of user-defined type?
Thanks for your help,
Michelle -
Missing user variable input values in export to excel functionality
Hi,
I have a problem in exporting data into excel, I could able to export the data with complete result rows but i am not able to see the user input variable values.
To be in detail: The moment i execute the report in web, user gives the initial variable values as selections and run a report. The data will be displayes as per the user selections. Then the user clicks on export to excel (designed as per SAP how to), now the excel data shows the body of the results but the initial input variable values are missing.
It would be really good if we also export variable values along with the report output.
If any of you solved this requirement, could you please help me in solving this.
Thanks in advance
Regards
VaradaHi,
Here is a solution to make visible the Values of variables you selected in the Excel File.....
1.Create a Web Template with an Analysis Item and Info Field Item
2.Assign the Data Provider which contains varaibles to the Analysis Item
3.Assign the same Data Provider to an Info Field Item
4.In the Properties of Info Field Item,
Set the Visibility as "Visible"
Data Binding as "Variable Value" and mention the varaible
Save the Web template->Execute and Export to Excel
Now you will get it in Excel file
For more info....
Re: Display values of variables in exported excel file
Rgds,
Murali -
Label report with user defined input -
I am trying to make a report that will print out the data onto avery labels 5163(which is 2 across u2013 5down =total 10 labels per sheet) with my information. The program already sets your boundaries for the labels so thatu2019s not a issue.
My current select statement works somewhat : if I enter 1 inventory.itemnum and whatever qty I want it prints fine. However when I enter multiple inventory.itemnums it prints each one of those itemnums at whatever qty I enter in the second parameter. So say I enter 2 itemnums and enter qty 2 to print- I get 2 labels of each item num. Currently I this format I have the second parameter set to NOT allow multiple fields u2013 however when I change this to allow my report fails u2013 please see my info and layout stuff below
Here is what I have:
INVENTORY.ITEMNUM} = {?Control Id:} and
{Sheet1_.Column1} <= {?number of labels}
Inventory.itemnum u2013field from database
{?Control Id:}---parameter 1
{?number of labels}---parameter 2
{Sheet1_.Column1}----excel table brought in as secondary database to serve as count feature for report u2013 currently set at 20 but can change from 20 to 10 or higher- whatever qty I want. The most labels I will need for any 1 item is 24 u2013 but I can print 2 sheets of 10 then 1 of 4 if we reduce it to qty 10 in the table.
I have 2 parameters that prompt for data
Parameter 1: it prompts for .itemnum (I have this parameter set to allow multiple inputs of inventory.itemnum)
Parameter 2: it prompts for qty of labels needed. currently not set to allow multiple numbers as I get a failure when I change my parameter to this.
As my info above sits I can enter 1 random inventory.itemnum (parameter 1) and a qty (parameter 2)(1-20 u2013 which is set by a table I built in excel 1-20 u2013 above which is sheet1_.column1)
What I want to be able to do is
1. (Parameter 1 here)Enter inventory.itemnums from random qtyu2019s of 1-10 at any given input time from user prompt in parameter
2. (parameter 2 here)Print label of qtys ranging from 1 label per each item to as many as 10 labels per item
a. For example: I enter
b. Parameter 1:
c. Xitem1.itemnum
d. Xitem2.itemnum
e. Xitem3.itemnum
f. Parameter 2:
g. Qty 1- is the amount of labels needed for xitem1(from parameter 1)
h. Qty 3- is the amount of labels needed for xitem2(u201C u201D)
i. Qty 6- is the amount of labels needed for xitem3(u201C u201C)
3. I need the qtys in parameter 2(labels to print) to work with the inventory.itemnums as they are entered in parameter 1.
I have tried using arrays but they force me to use the same amount of data that I have clauses. Which does not work because I have varying amounts of labels needed at different time-If I have 2 labels and have more clauses than this the report fails. I will not always have 2 or 3 labels to make maybe more maybe less.
Here is a example of what I was trying with arrays:
{field.xitem}=(?item.num)[1] and
{?qty}[1]>={numbertable.number})or
{field.xitem}=(?item.num)[2] and
{?qty}[2]>={numbertable.number})or etc.,etcu2026u2026
This would force me to input as many item.itemnums and qty labels as there are arrays or the report would fail.
Edited by: max274 on Mar 30, 2009 3:11 PMmax40385
SELECT "INVENTORY"."ITEMNUM", "INVENTORY"."ORDERUNIT",
"INVENTORY"."BINNUM", "INVENTORY"."MODELNUM",
"ITEM"."DESCRIPTION", "POLINE"."ITEMNUM", "POLINE"."ENTERDATE",
"POLINE"."PONUM", "POLINE"."ORDERQTY"
FROM "MAXIMO"."INVENTORY" "INVENTORY",
"MAXIMO"."POLINE" "POLINE", "MAXIMO"."ITEM" "ITEM"
WHERE ("INVENTORY"."ITEMNUM"="POLINE"."ITEMNUM") AND ("POLINE"."ITEMNUM"="ITEM"."ITEMNUM") AND
"POLINE"."PONUM"='24142' AND "POLINE"."ITEMNUM"='1201020021N'
EXTERNAL JOIN POLINE.ORDERQTY>={?C:\Documents and Settings\kpowell\My Documents\test table.xls: Sheet1_.Column1}
*****************my counting table here********
C:\Documents and Settings\kpowell\My Documents\test table.xls
SELECT `Sheet1_`.`Column1`
FROM `Sheet1$` `Sheet1_`
WHERE `Sheet1_`.`Column1`<={?max40385: POLINE.ORDERQTY}
Here is my select statement
POLINE.PONUM} > "23000" and
{POLINE.PONUM}={?My Parameter} and
{POLINE.ITEMNUM}={?Control ID}AND IF
{POLINE.ITEMNUM} in ["1107011010N", "1201020021N"]THEN
{?Control ID}*({@qtY})
my label printing works except when I my inventory item conversion is like the exmaple below - this is trying to get my label program to work
but i want to add some execeptions to my statement currently the
link is as a leftouter join to my counting table which give me my qty of labels to print per user input {?control id} however - some of the items i order with different order units and conversion qtys for example
qty 2 - box-10 - going into inventory 20 - I need 20 labels printed vs just 2 - since the labels to print are directly tied to the requested order qty - i need to add the exceptions because some I order with conversions that I will not convert and I just want to add them list "one of" in the selection formula -
기존 ELEMENT에 INPUT VALUE를 추가하는 방법
제품 : HR_PER
작성날짜 : 2005-11-23
기존 ELEMENT에 INPUT VALUE를 추가하는 방법
================================
Explanation
기존 Element에 Input Value를 하나 더 생성해서 DB Item으로 값을 읽고 싶은데 Input Value추가가 안되네요. 어떻게
추가하는 방법이 없을까요?
### Steps to Reproduce ###
HRMS Manager > 보상합계 > 기본 > 항목내용 화면에서 입력값버튼을 눌러 입력값을 추가하고 싶음.
### CAUSE DETERMINATION ( Not required for Question-Answer issues) ###
### SOLUTION / ACTION PLAN OR ANSWER ###
Note : 175552.1
"Maintaining Elements
After you have defined and used an element, you can make the
following changes:
-Change a required input value to be not required.
-Alter the sequence in which input values appear in the Element
Entries window.
-Change the input value validation rules for minimum,
maximum, lookup, or formula.
-Change your specification of which input values create Database
Items. Note, however, you cannot remove Database Items if they
are used in any formulas or QuickPaint reports.
-You cannot remove existing input values or add new ones if you have
created any entries for the element."
Note : 334953.1
Symptoms
o Tried to add an Input Value to an existing element.
The links to the element were end-dated on 29-Jul-2005
o Navigation: Total Compensation --> Basic --> Element
Description, Bring up input values form, and try to add a new input value.
Error happens
o Error message:
'FRM-41051: You cannot create records here
o Expect to be able to enter new input values.
o Happening in patch instance
Cause
The Error 'FRM-41051: You cannot create records here' arises because there are existing element entries for this element.
An input value cannot be added to an element if element entries exist for that element or input
value date is greater than the start date of the element.
Internal Bug:710550 : CAN'T MODIFY OR ADD NEW RECORDS INTO THE INPUT VALUES FOR AN ELEMENT
States the following:
"General rule is:
Insert of new IVs is not allowed when any element entries or run results for the element type exist.
I understand this is not the case here as there is no link for the element but can this be verified again.
This functionality is controlled via CONTROL_INPUT_VALUE_INSERTION procedure.
Insert of input values is not allowed when:
element_entries_exist or
no_of_input_values for the element is > 15 or
:ctl_globals.session_date != element_start_date "
Bug 809105 : CANNOT ADD INPUT VALUES TO EXISTING ELEMENT (PAYWSDET)
States:
The business rule quoted in Bug 710550 also states that you cannot add a new
input value if element entries exist for this element - please check that this
is not the case here.
Note 269070.1
Title: Cannot Create A User Defined Input Value For A State
Retirement Plan Deduction Element
Symptoms
In the element description form you cannot add new input values for a deduction element. You get
this error when creating new input value:
FRM-41051 You cannot create records here
The deduction element is a newly created element.
Cause
When adding the input values Datetrack date was not proper.
Fix
Make sure there are no element entries existing for the element.
Make sure to date track to the date when the element was created.
Solution
Because the application looks at three conditions before it will allow you to add an input value
to an element, if one of those conditions are met it will not allow you to create the element entry.
In your case 2 are being met so the system will not allow you to create the element entry.
1- element entries exist
2- state date of the new input value is greater than the element start date
Conditions being looked at:
element_entries_exist or
no_of_input_values for the element is > 15 or
:ctl_globals.session_date != element_start_date
There is no workaround for scenario, you need to create a new element.
결과적으로 말씀드리면, 한번 입력된 Element에 대해서는
아래의 두가지 속성을 모두 충족하지 않는 한,
Input Value를 추가로 입력하실 수 없습니다.
신규로 Element를 지정해주셔야 합니다.
1. Make sure there are no element entries existing for the element.
==> 해당 Element에 대한 Element Entry가 없어야 합니다.
2. Make sure to date track to the date when the element was created.
==> 신규 Input Value를 입력하려는 DateTrack날짜가 Element가 생성된 날짜와 같아야 합니다.
Reference Documents
Note : 334953.1 Paywsdet Error 'FRM-41051: You cannot create records here' when Trying to Add an Input Value to an Existing Element.
Note : 175552.1 How To Add A New Input Value To An Existing Element ? -
User defined fields in Crystal layout
Hi All,
I want to add user defined field values in crystal layout for Sales order, but its not listed in RDR1 tables there but it's available in SAP query manager view. How can i get that in Crystal reports. please suggest on this.
Regards
SreeYou can then remove the key and the fields in the database will keep their correct definitions rather than varchar(max) which is causing the initial problems.
Adding extra keys may uause performance issues if you leave them there for a large table.
I have also had issues of varchar(max) fields causing database connection issues when running the reports in 8.81 PL07.
Rob -
How to retrieve user defined attributes in Prepopulating a request dataset
Hi,
I have created couple of user defined attributes in user profile.
And I am tryting to develop a prepopulate adapter in a request dataset for a resource. I need to prepopulate request dataset based on the values of above said user defined attributes.
I tried to use tcResultSet result=UserOppsIntf.getSelfProfile(); in my pre-populate adapter but it is giving me only the following attributes and it is not giving any of my user defined attributes.
Users.Manager Key
Users.Manager Login
Users.Manager First Name
Users.Manager Last Name
Users.Password Warning Date
usr_locale
Users.Key
Users.Password Expired
Users.Middle Name
Users.User ID
Users.Password Expiration Date
Users.Status
Users.Password Warned
Users.Email
Telephone Number
Users.Display Name
usr_timezone
Users.Lock User
Users.Last Name
Users.First Name
MEMBERTYPE
If I use the code userData = usrService.getDetails("User Login", RequesterID, null); then I am getting only the following.
Display Name:
act_key:
Full Name:
usr_key:
User Login:
Last Name:
First Name:
Please let me know how to retrieve all of user defined attribute values in prepopulate adapter for a request dataset.Use below code to get all attributes in user profile including UDF.
OIMInternalClient objOimInternalClient = null;
User user = null;
UserManager usrService = null;
objOimInternalClient = new OIMInternalClient();
if (objOimInternalClient != null) {
try {
objOimInternalClient.loginAsAdmin();
usrService = objOimInternalClient
.getService(UserManager.class);
user = usrService.getDetails("usr_key", strUserKey, null);
endDate = (Date) user.getAttribute("End Date");
} catch (Exception e) {
e.printStackTrace();
} finally {
if (objOimInternalClient != null)
objOimInternalClient.logout();
if (user != null)
user = null;
if (usrService != null)
usrService = null;
In order to see all UDF's in User profile, please create Authorization Policy. -
User-defined fields in cost calculation
Hi, I'm working with process order in customer service process.
I would like to make a cost precalculation based on a user-defined field.
To let you know.
I created a new user-defined field.
I affected to it a new parameter ID so that this user-defined field value can be used in formulas.
I created a new formula with my parameter ID.
This is allowed for costs.
Now in my work center I defined these data for costing
price for pre calculation is defined for IN9020 and cost center.
Now in my service order I fill the required field.
I would have thought that according to formula, SAP would use this value (6 PC through the formula) to calculate costs.
This is not the case.
Did anybody already use this?
Regards
OlivierDear Maniaba
We have used user fields in task list to capture quantity in terms of nos & its weight for each operation. This we used as a work around to capture the repair jobs quantity & tonnage. While mapping repair of a particular machine with out any reference to material(that is we have not created them as serialised material as in the case of refurbishment) we have created task list for its repair and user wanted to capture the quantity of repair (say how many & also its weight) so we have maintained the tonnage per 1 no in these fields. later when order is being created user selects the task list & changes the quantity field then we have developed report where we calculate the total tonnage of that job & also no of items repaired.
Regards
S P Behera -
Permitting user to choose value for a field only from F4
Hi all,
I have the following requirement in table maintenance generator.
There is a custom field in the Z table for which table maintenance is generated to which a search help is attached.
Now in the maintenance screen(SM30) i get a F4 value help for this field and also user can input values in this field. But the requirement is that the user should be able to select values only from F4 and should not be able to input any values.List box is not accepted.
Thanks & Regards,
ShafiqHi Jon,
Thank you once again. The issue is solved using the 'DYNP_VALUES_UPDATE' function module.
I will put the code here for others to refer.
****ON THE SCREEN FLOW LOGIC*****
PROCESS ON VALUE-REQUEST.
FIELD /rb05/wwr_cr_t-mvgr4 MODULE value. "Field on which F4 is required
****MODULE IMPLEMENTATION********
*& Include /RB05/LYBW_WWRTTTI01
DATA:
l_fldval LIKE help_info-fldvalue,
l_repid LIKE sy-repid,
l_repid1 LIKE d020s-prog,
l_dynnr LIKE sy-dynnr,
l_dynnr1 LIKE d020s-dnum,
lt_return LIKE ddshretval OCCURS 1,
ls_return LIKE ddshretval,
ls_dynpread LIKE dynpread,
lt_dynpread LIKE dynpread OCCURS 1,
cnt TYPE i VALUE 0.
MODULE value INPUT
MODULE value INPUT.
GET CURSOR LINE cnt.
l_repid = sy-repid.
l_dynnr = sy-dynnr.
l_repid1 = sy-repid.
l_dynnr1 = sy-dynnr.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = space
fieldname = space
searchhelp = '/B05/OWWRW58'
shlpparam = '/B05/S_WWRW58'
dynpprog = l_repid
dynpnr = l_dynnr
dynprofield = '/RB05/WWR_CR_T-MVGR4'
stepl = 0
value = l_fldval
display = 'F' "Force
TABLES
return_tab = lt_return
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF NOT sy-subrc IS INITIAL.
MESSAGE s398(00) WITH 'Call to Searchhelp failed'
space space space.
EXIT.
ENDIF.
CLEAR : ls_dynpread, lt_dynpread, ls_return.
BREAK-POINT.
READ TABLE lt_return INTO ls_return WITH KEY retfield = '/RB05/WWR_CR_T-MVGR4'.
IF sy-subrc EQ 0.
ls_dynpread-fieldname = '/RB05/WWR_CR_T-MVGR4'.
ls_dynpread-stepl = cnt.
ls_dynpread-fieldvalue = ls_return-fieldval.
APPEND ls_dynpread TO lt_dynpread.
ENDIF.
READ TABLE lt_return INTO ls_return WITH KEY retfield = 'TXTSH'. "Filling the related field
IF sy-subrc EQ 0.
ls_dynpread-fieldname = '/RB05/WWR_CR_T-GB'.
ls_dynpread-stepl = cnt.
ls_dynpread-fieldvalue = ls_return-fieldval.
APPEND ls_dynpread TO lt_dynpread.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = l_repid1
dynumb = l_dynnr1
TABLES
dynpfields = lt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDIF.
ENDMODULE. "value INPUT
P.S: Points alloted.
Message was edited by:
Shafiq -
Passing user defined parameters in oracle reports thru command line
Hi All
We are currently using Reports 6i with Oracle 10g 10.2.0.4.0
I would like to know that is it possible to pass user defined parameters values while calling report from command line.
For Example: I am using following coding to call report from command line.
for /f "tokens=1-3 delims=/ " %%a in ('date /t mm/dd/yyyy -1') do (
set mm=%%b
set dd=%%a
set yyyy=%%c)
rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%.pdf desformat=PDF BACKGROUND=NO BATCH=YES
The report contains some user defined parameter which is using in where condition of reqport query.
Select * from banks
where id = :Bank_ID
Now I want to Pass value for :Bank_Id from command line (like we pass parameter list while calling report with run_product), how it is possible?
Thanks
HassanHi guys
Fortunately I am able to perform the required task as I just added the report parameter field as follows:
rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%%h%%mi%%ss%%ts%.pdf desformat=PDF BACKGROUND=NO BATCH=YES ERRFILE=c:\reports\error.log LOGFILE=c:\reports\joblog.log bank_id='MCB'
bank_id is the report parameter using in where clause.
Regards,
Hassan -
User-defined http header and com.oracle.httpclient.HttpRequestBuilder
Hello,
In Java ME Embedded 8, I would like to send a HTTP request containing a user-defined identifier in the http header (X- header type), using the com.oracle.httpclient package.
HttpClient client = clientBuilder.build();
HttpRequestBuilder requestBuilder = client.build(http://my_uri);
requestBuilder.setHeader(HttpHeader.ACCEPT, "text/plain");
Here, I would like to add a user-defined header value like :
requestBuilder.setHeader("MyHeader", "myHeaderValue");
It seems that there are only pre-defined values available for headers in the com.oracle.httpclient.HttpHeader class.
Is there any way to add a user-defined header in the request ?
Thanks in advance.
BrunoHi Bruno,
did you try HttpHeader myHeader = new HttpHeader("MyHeader");?
/Sergey -
Error in Inputting value in a table
I am populating one of my table column with EVS and we also have to give the functionality to user to input values free handedly but whenever user is putting value we are getting error
The string "000000000007000000" is not in the quantity of allowed values
But if the same value is coming from EVS it is accepted successfully.
Any help will be rewarded points
Thanks
-AshwaniHi,
you can give a try by creating a nonvalidating action for this input onEnter
add the newly entered value as part of the EVS.
If the error is displayed even before a round trip then the above solution will not work and you have to live up with the framework error.
Regards
Ayyapparaj -
Setting an Edit pattern does not allow inputting values
I'm using a custom field (Phone Number North America) in a designer form. My users want to be able to edit and display value in (999) 999-9999 format. So I set the Display and Edit formats to text{'('999')' 999-9999}. Setting this pattern only displays the value in this format, but when I go to edit the field for the first time (when the field is blank), it allows inputting without any format. And when I want to edit an inputted value in the field, it does not even allow to change anything. It seems to be readonly/locked.
What I want to be able to do is that the field must allow the user to input values in the format that I set in the Edit pattern box. This must work even if the field has a phone number value already in it.
Any help will be highly appreciated.
FYI...My Adobe LiveCycle Designer ES2 version is: 9.0.0.2.20101008.1.734229 Cipher: 128-bit.
Thanks in advance...Hi Mahabub,
Keep the below script on exit event of the Phone Number dnt select any pattern for the field.
// Regular Expression for the phone number (999) 999-9999
var vPattern = /^(\(\d{3}\) \d{3}-\d{4})$/;
if (vPattern.test(this.rawValue))
app.alert("Matched");
else
app.alert("not matched")
This gives you Error message if the entered value is not matched with the pattern.
Please let me know if you need any more info.
Vjay
Maybe you are looking for
-
Change price in Sales Order created with reference with Quote
Hi Experts, Need to change price (eg..1000USD to 1100USD) in sales order (va02). Here Sales Order is created (va01)with reference with Quote(va21) where price in maintained (as 1000USD). so price in Sales Order is copied from Quote. Now, If I want to
-
I just purchased a new ipod touch to replace my old ipod touch. The reason I bought a new one is I wanted one that had the icloud that I could sync to my ipad and iphone. I am going to give my old one to my husband. I plugged my new ipod touch int
-
How to use Barcode option in adobe forms!!!!!!!
Hi Expert, I need some information. Please tell me how to use barcode in adobe forms. Is there any standard program? Please help me. BR Srinivasareddy Moderator Message: Search for available information first. Edited by: kishan P on Nov 29, 2010 11:2
-
MP3 CDs won't work in car stereo
Hello. I've tried multiple burning tests with iTunes, Toast, and the Finder. I'm trying to get an MP3 CD to work in my 2007 Mazda 6 (five CD changer). The manual says it will read MP3 CDs, and I am burning MP3s... not AACs. When the CD is loaded into
-
Sx20 Video Inputs and third-party cameras.
Hi, All! At CTS-SX20-PHD4X-K9 has two video inputs. Can I use them to connect external video cameras? If so, what cameras are supported?