LOV Timing Out / Not working in Admin edition

We are using Discoverer 10.1.2.45.46c and version of Desktop, Plus and Viewer. Just running in regular mode, NOT apps mode.
We have a situation where the LOV's are no longer working. It gives an message saying 'There are no values for abcded' where abcded is the field name.
This just started to happen a couple of weeks ago. When I go into the admin edition to check the LOV item class it usually says that it will take a long time to run and then returns nothing or it says 'The folder for this item class is either not accessible or is invalid'. Item classes were set-up when business areas were created so nothing fancy.
If I go into a column and create a new item class using the field, it works and gives me a list of values and then quits working in the admin and user editions shortly there after.
Any suggestions ? I am running out of ideas !

Hi,
Well basically you gave the answer yourself...
you said that when going to the admin you get "The folder for this item class is either not accessible or is invalid"
so you need to go and check the validation of the folder that the item class is based on.
you can use the "vlidate"->"folder" from the toolbar to visually see the the invalid folders you got.
Also i would suggest you to create a new item class and base it on a new object so that the LOV will be retrieved quickly to avoid the timeout.
up to here this handled the "Invalide", now lets go to the "not accessible" part.
If it is valid and working good then the other thing possible is security matter, you need to verify that the user you use to run the report with the LOV have the access to the folder that the item class is based on.
this user need the access rights to the BA, this can be defined in the administrator security definitions ("tools->security")
last thing to check is that the user has the grant select on the DB object.
Tamir

Similar Messages

In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Soundblaster X-Fi Titanium Optical Out not working???

Hey friends,
I purchased a Sound Blaster X-Fi Titanium PCIe yesterday to run on Windows 7 64bit to trigger VSTi instruments. I can hear the VSTi play fine when I have headphones plugged into the soundcard but I want to send the audio sound OUT via the Optical Out into my Steinberg MR86x firewire audio card. ?
I can see the light on the optical cable but no sound seems to be being sent from the sound blaster into the steinberg card.
?Now before people start saying you cant do that, I have have been doing this for the last 3 years and it has been great apart from my RME Audio card is not compatible with Windows 7 64bit hence why I purchased the soundblaster.
I really am at a loss as to what I can try next, I have been through this forum and tried a few recommended tweaks but nothing? Am I missing something obvious here?
I am using the following drivers
Driver: v2.7.008 Windows 7 64bit
DTS Connect: for Windows 7 64bit
Also in the Audio Control Panel / SPDIF I/O all options are greyed out apart from the Digital Output tickbox, I only want to use this card for Audio as in creating music or specifically for triggering VST synths.
I would really appreciate any advice
Thanks in advance
KiloHurtz

Re: Soundblaster X-Fi Titanium Optical Out not working?I have same card, same?OS?and lots of problems.
Analog outputs(control panel->sound->speakers) disappears when boot or reboot, sometimes it works week, sometimes a hours. When it works, it's works ok, but suddenly during boot,?all sounds is lost, when trying launch for example Creative Audio Control Panel this message appears: There are no supported audio device available. You need to close the application. Click OK to close the application now.
And when analog outputs disappears, no any sound via SPDIF, even it shows in notification area and control panel->sound and in device manager.
I have owned card about two months, once change card in warranty, and?several uninstall, cleaning traces, reinstall and card works for while?and?out of blue, when boot computer, no sounds at all and only way to get sounds back is driver uninstall, cleaning and reinstall.
Creative Customer Support seems to be clueless, but make Technical Support Request if problems continue. And all other too, if problems like that appears, contact to Creative, maybe they really try?to do?something abuot it and not just send instructions how to uninstall and reinstall drivers.

Tv out not working on ios 8? please tell me what is problem?

When i update my iPhone 4s to iOS 8.1 tv out not working . Help mee plzz

If those numers are ordered correctly it sounds like you are using a faulty charger with your iPhone. It should charge faster with the charger than a USB port as the charger supplies a higher current. Different batteries are going to charge differently based in part on differences in the ways they have been used.
Try using your friends charger with your iPhone and see how long it takes to charge compared with your charger.

Time out not working in program

Hello all,
I have a program that is not timing out after 2 or 3 hours of on-line execution. I have checked that the parameter abap.timeout and it is set to 5200 secs. I have been told that a commit work or a message statement will reset the timmer that controls this time out. However, the part of the code that is eating basiclly all the time does not contain either of these statements. Does any one know of where I could get a complete list of statements that reset the time out timmer?
On another related issue, when I executed the program in run time analysis it took the normal 2 and a half hours. And on return to the run time analyses main screen I recieved the error 'Unable to end the measurement (error number 5, Time limit reached)' Message no. S7 068. Without any extra information. It's obviously not suprising that the runtime analysis program refuse to analysis code that takes more than two hours to execute but could anyone tell me which parameter controls this time limit?
Thanks in advance for your help as I am in real need of it.
Jamie

Hi Jamie,
In runtime analysis, these problems are there what you can do the best options in ECC6.0 is ST12 for doing both Run Time Analysis and SQL Trace. In ST12 you have the option to increase the timlimit so that your programs whole measurement will come in file which is generated by SAP.
Following are the steps for using ST12:
1. Open ST12. Click on Current Mode.
2. Enter the program name or transaction code for which you want to do the measurement.
3.There is button in the middle of the screen which has given the heading as 'Further opt.' there you can increase the file size to 99MB and at the bottom Max Trace Runtime which you can increase upto 2147483647 and enter.
4. Then Click on Execute.
5. Enter the inputs of the Selection screen.
6. After the program run is completed in the TRACE ANALYSIS section select your program and after that it appears in the Selected trace analysis box.
7. After that click on ABAP Trace that will give an exact analysis and for SQL Trace Click on Performance Trace.
8. and for Checking how much CPU Utilization and how much Data base utilization is required click on SUMMARY.
Thanks
Harsh

Phasein/ out not working,

Hello Guru,s
If i am selected Days in period(Suppose 20 days) option in my master forecast profile(Univariate Screen)
then phasein/ out is not working in interactive screen...i am not getting the values.
If i didn't select the days in period, i am getting the valus for phase in/ out.
Note: I have activated the in life cycle profile option in MFP and all settings are correct in phasein/out.
Only problem with the option ~~days in period~~~
If we selected the option in days in period then Phasein/out& like profile will not work as per SAP???????
Please help me in this regard.
Regards,
Sree!!!

>
sai balakavi wrote:
> If you have activated Aggregated Lifecycle Planning then as Percx mentioned Phasein/out cannot be used with entry in periods field. Please follow this link
>
> http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
>
> Some how the link is not directing to the exact material..however please follow this path
>
> Aggregated Lifecycle Planning with Like modelling-->Aggregated Life cycle planning with Phase in/out profile
>
>
> Edited by: sai balakavi on Sep 29, 2008 4:03 PM
>
> Edited by: sai balakavi on Sep 29, 2008 4:05 PM
Hi,
Thanks for the supporting,
as my understanding is
if i checked that Aggregated lifecycle planning with phase-in/out modelling option in life cycle basic setting screen...then my forecast results will first take into agg level, then system checks the phasein/out then it will dist the result as per phasein/out.
But my problem is if i am using the option days in period(20days) in master forecast profile then my phase in /out profile is not working...if i removed those days and keep as blank then my phase in / out is working.
So what is link between these two like---- days in period option in master forecast profile and working the phase in/out profile in SDP94.
I think it is clear now....please correct me?????
Regards,
Sree

NEO2 Audio out not working & Mobo Review

Everything finally working great! Have all the latest live updates and after some hiccups getting the system built, it appears to be everything MSI promised it would be.
I have 3 80 Gig SATA drives, P4 2.53 GHZ, 1 Gig Corsair ddr400 memory in dual mode, 1 Panasonic DVD RAM, 1 SAMSUNG dvd/cdr, 1 Internal multi card reader, Realtek 5600 128 meg video card. Canopus DVSTORM2 hardware/software editing solution. All IRQ's are happy and finally set and there are no conflicts. The system is fast and has not crashed since installing the latest drivers and patches.
The only bad news is,... my audio out is not working! The front panel headphones work, but I can't get any audio out of the back ports. I have the Audio 6 channel port installed, even though I only need 2 channel stereo. I have played with all the settings, and still get nothing! I need also to get audio into the back, which is also not apparently working. All the devices say they are installed and working properly, I just can't get any sound. :O
So.......... Either someone on this thread has some options for me, or I'm off to get a audigy sound card, but I feel I'm pushing it with all the other system devices and IRQ's I'm using. So I would like to use the built in audio. Any help is appreciated.
Also a note... I can hear in the headphone out, a real presence of the SATA drives spinning and reading, it definitely is not a clean output, with the high end drives, they are sooo fast they create electrical ambient sound effects that are loud and annoying! unless listening to R2D2 on steroids is a desired experience! :D LOL! Perhaps another sound card would bypass this also. As always.... pushing the limits of technology, hey and I haven't even started overclocking any default settings yet!
Anybody have a shot list of settings that might be useful?
Thanks in advance for your input.
[email protected]

Check the front panel audio connector. There are usually 4 pins which need to be shorted to have signal output directed to the rear audio ports. The manual will give the exact pins to short. I think you'll find it's pins 5 & 6 (right channel signal in & return) and pins 9 & 10 (left channel signal in & return). Basically, if you use the front audio header, the rear audio ports wont work.

Fade in Fade out not working on Rollover Image for Captivate 6

Hi
I am totally baffled with this issue. When I use Fade in 0.5 sec and Fade Out 0.5 seconds on a rollover image, it will not work. I even changed the default on my preferences for rollover images and it still will not work and does not show in my accordian panel in properties.
If I use Captivate 5, I do not have any problem. Any suggestions?
Thanks
Jeff

Are you forgetting that a rollover object has two parts? It has a hit area and the object that appears when you mouse over the hit area. Each part can have different settings in the Properties tab. In a rollover caption, the object that appears is a text caption. In a rollover image, the object is an image.
If you select the rollover object on the timeline, the Properties you see for it in the Properties tab are for the hit area. So having fade in or fade out set there will not affect the object that appears on mouseover.
If you select the caption or image on the stage in Edit mode, the properties shown in the Properties tab are for that specific object and can be different from the hit area of the same rollover object.
In your case, make sure that your image is set to have fade in or fade out. Fading on a hit area of a rollover object is not really useful at all.

Client logging out not working

I am having two issues , the first happened quite recently but I don't know if I caused it. Users on client machines cannot fully log out. The computers stop the logging out process when they get to the desktop image, The second issue is that when some clients log out the show up as disabled/asleep in server administration. This prevents them from logging in later, without me manually disconnecting them at the server. I work in a school and we have set students with the restriction of not having mutiple log-in privileges. Thanks in advance for any suggestions.
iMac slot load clients 10.3.9 eMac 10.4.9 G4 server 10.4.9 Mac OS X (10.4.9)

rlt6246 wrote:
Thanks to WorMzy for the link, and thanks to djraymondnm for the simple solution found in post [SOLVED] xfce-session-logout does not work as expected. For the record, let me post the solution here:
djraymondnm wrote:
Activate the "sessionstop_cmd" line in /etc/slim.conf as follows:
sessionstop_cmd (killall --user $USER -TERM; systemctl restart slim)
from: https://bbs.archlinux.org/viewtopic.php?pid=1287549
Also:
goyim wrote:
as per PABLOKAL found solution to DM freezing after second logout...
sudo nano /etc/pam.d/slim
auth include system-local-login
-auth optional pam_gnome_keyring.so
account include system-local-login
session include system-local-login
-session optional pam_gnome_keyring.so auto_start
session required pam_systemd.so # Add this line which is missing
from: http://bbs.archbang.org/viewtopic.php?id=4495
Did the trick.
Last edited by loltill (2013-07-16 09:26:00)

MacBook video out not working

Hi there
I bought the mini-dvi to s-video/composite output to connect my MacBook up to a TV while away from home (to watch TV and movies) but it doesn't work. First I suspected the old TV, but works OK with the Wii connected. Then I thought it was the cable, but I tried a new cable and the sound works fine, so that's not it. Then I suspected the adapter, but when I got home I connected it to my wife's MacBook and it worked fine.
So, looks like I have dodgy graphics card hardware?
The MacBook detects that the adapter is connected, so some of the pins are working OK. I just can't get a signal from my MacBook to the TV and the auto detect does not work.
Anyone got any ideas? The computer is no longer under warranty and I don't have time to take it to the dealer (it takes them three weeks to turn around a fault!) so I'm guessing that I'll have to open up the device myself and check for some bad connections?
Any advice is appreciated!
Regards... Jonny.

Video out under 10.5.2 works fine for me and for a colleague of mine with a more recent MacBook Pro. I'd wager it's a problem with your Leopard install, not a universal one.
Also, FYI, Apple doesn't read these forums; they're just for user-to-user help. If you want to leave MacBook Pro feedback for Apple, do so here:
http://www.apple.com/feedback/macbookpro.html
But again, I do not believe yours is a universal issue. We'll be happy to help troubleshoot though. What do you mean the image is "unstable"? Could you take a digital photograph of the external monitor's screen and upload it somewhere?

Digital video out not working

For some reason on my 2011 Mac Book Pro the digital video out does not work? It works just fine using the minii adapter for analog video out, but not for digital?
Any advice much appreciated!
Thx
Mark

It is working exactly as it is supposed to. You didn't read the description properly before buying.
Video mirroring is available on the iPhone 4S, not the iPhone 4.
Video out needs to be supported by the app you are using.

System.out not working on eclipse

Greetings...
I am no longer a newbie on Java, but I have been facing an issue lately that I have been unable to resolve myself, even though it seems to be something so silly.
I have been using eclipse for development, and by developing a simple "Just to practice" code I have found myself unable to use System class or any of its methods at a certain point. See the code below:
package one;
import java.util.Scanner;
public ClassOne {
public static void main (String args[]){
Scanner reader = new Scanner(System.in); /*Works just fine here*/
int x = 0;
System.out.println("Type in the number of objects expected"); /*Does not work at all, like if System was something I could not use at all. Not an identifier */
Scanner readertwo = new Scanner(System.in); /*System does not work here either*/
}Even if I rewrite the code after that, by erasing the import statement and all other System references in the code, System does not work again.
If anybody has ever faced the same issue and knows what I am doing wrong and what I can do to fix it, I'd really be grateful.
Thanks to all, and happy 2009.
Santana T

Santana_Thiago wrote:
It works on NetBeans.
On eclipse I get the following error:
ERROR: JDWP Unable to get JNI 1.2 Environment, jvm->GetEnv() return code = -2+
*JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820]*+
The funniest thing is that if copy and paste the code from somewhere else into eclipse it works. What a drag!!!!
Thank you.
Santana TNever seen that error but it sounds to me that your Eclipse installation is screwed up!

Iphone for VGA Video Out not working

We have the Iphone/iPad VGA to Monitor connector. We tested it with 3 different iPhone 4 phones... It worked on 2 of them, but the 3rd woudn't work. What possible reason would it not work? The 3 phones had software of 4.3 and higher...

Dr. L,
The previous iPod's did not support component video out for newer televisions that support it. The box for the older Video out cables do not say they support the iPhone.
The current video out cables are available in either component or composite video out. They also say they support the iPhone on the box.
In addition when shopping the Apple Store online for iPod or iPhone accessories there is a compatibility guide which shows icons of the iPod models or iPhone that are supported.
Overall my personal experience is that this, and other Apple specific ones, are much smaller compatibility, and downtime driver for IT than many of them I have run across supporting a variety of computer and networking platforms over the last 23 years.
Hope this helps,
Nathan C.

Video Out not working on Ipod Classic 80gb

I can't get video out to work on anything. I have a relatively new Onkyo home theater with an iPod dock that has video out cables, and I can't get a picture to show up on the TV. Also, my gym has StarTrac cardio equipment which has video connectivity through a built-in iPod dock. Video is supposed to show up on the TV monitor attached to the cardio machines, but all I get is "no signal".
Since I can't get either of them to work, is something wrong with my iPod?
Thanks!

When you want to show the video on your TV, have you selected TV out in the video settings options?
If that's not the problem, check this page, http://support.apple.com/kb/HT1454 to ensure you have the correct cable for your iPod, although you need to ensure you have identified your iPod model correctly. Check http://support.apple.com/kb/HT1353 if you're not sure because there is a crucial difference between the Classic and the 5th generation video models. (On the *iPod and iPhone: TV out support* page - http://support.apple.com/kb/HT1454 - look at the third table down, headed *Apple Component AV Cable with iPod Universal Dock or Apple Universal Dock* .) Notice that the Apple Universal Dock and Component cable combination works for an iPod Classic, but not for the 5th gen iPod. My point being; if the STarTrac device you mention has a built-in dock, perhaps it's designed for the iPod Classic, but if you have the 5th gen, it won't work.
... and no, I don't know why one dock is called the Apple Universal Dock, while the other is called iPod Universal Dock! Such a similar naming convention only leads to confusion. I know, I had to examine each box in my local store to find the iPod dock among all the Apple docks they had since they thought both docks were identical.

LOV Timing Out / Not working in Admin edition

Similar Messages

Maybe you are looking for