Low Memory reports in crash reporter folder

Hi,
My iPad apps crash a lot. I just looked in the folder CrashReporter->MobileDevice->Thad's iPad and found over 4,400 files. Over 3,600 of them were LowMemory files including 94 from today! There must be something wrong with my iPad, apps, files, usage habbits, or something! Can anyone provide any suggestions as to what to do to stop this?
TIA,
Thad

If you are running iOS 5.1.1 on the original iPad, the iOS maybe taxing the capability of the processor. You could try quitting apps - even though that is not supposed to matter in iOS, it can't hurt to try that.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You might want to try this as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

  • IPad mini low memory report - what can I do to stop apps crashing

    The iPad worked well, but friend started playing Nemos reef,, no problem to level 20 now the Disney app is crashing all the time and occasionally Facebook and Safari crash. There is low memory reports but I do not know how to improve that. I did delete some apps but didn't help. Disney no help because I am in UK although they were happy to take money for in-app purchases!

    Do two things:
    1.  In Settings > iTunes & App Stores, turn off automatic downloads for Apps.
    2.  Assuming you sync using iTunes, turn off the automatic app syncing on the App tab when you have the iPads connected that should not receive the downloads.

  • Low memory and app crashes

    anybody else getting low memory warnings when using certain apps? is there a fix for this? say deleting apps?

    anybody else getting low memory warnings when using certain apps?
    Alas, our mindreading caps are at the cleaners. Which apps?
    For example, "Aurora Feint" is an app that's well known to give that error.
    Try force-quitting Safari and those apps, then try again. (Hold down Home button while on the app, until the application is forced to quit.)

  • HT1218 low memory,cant connect to wifi

    Ipad was crashing ,now i can't connect to the internet.All other devices working fine. Airport base station working fine. When i look at diagnostics, i see about 50 entries for low memory  then many crashes.What can i do?

    Well, I guess the wifi is not the problem then, just a side effect?
    Fix the crashing first...

  • CONSTANT low memory ipad1.

    I have and iPad 1 running iOS 5.1.1 and it is constantly crashing whilst using applications.
    My diagnostic list in settings is full of low memory logs and crashes. I have cleared all my cache, rebooted the iPad "as new" but I still get it crashing. It crashes in the app store, safari, other apps downloaded from the app store. Web browsing is slow and painful on sites which contain pictures.
    Not only this but typing is chronically slow, sometimes I can be halfway through a word before the keyboard recognises the strokes and catches up.
    what can I do? Is it just a feature of the ipad1 or is it simply time to buy a new one and consign this to a museum?
    Incidentally, my calendar is never upto date with iCloud, it is woefully slow to update.
    Thanks.

    How much space is your Other using? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • Crash reporter on iMac shows Low Memory crashes.

    I was looking for a crash log for something else today when I discovered a bunch of low memory crash logs in the User/Library/Logs/CrashReporter/MobileDevice folder.
    I have a 32G iPad, bought it this summer. IOS 4.2.1. And I have used only about 1/4 of the space of it according to the bar when I sync it to my iMac. I have just a handful of apps, one movie, about two dozen songs, and 22 Pages documents.
    Anyone have any ideas?

    Hi Paul,
    Low memory crash logs will refer to the system running out of RAM not storage space. The iPad has 256mb of RAM and with multitasking in 4.2 will be trying to squeeze more active apps into that space.
    I don't think it's worth worrying about unless it's the applications you are using in the foreground that are crashing.
    (It may just be background applications that are being terminated by the system to make more room for the apps you are launching. Apps are are given a certain amount of time to close and if they fail to close in time they are terminated so this maybe where the crash reports are coming from.)

  • What to do about diagnostic and usage reports. I have crash reports and low memory?

    I just recently got my iPhone 4S and I'm still learning and going through everything and ran into the diagnostic and usage reports low memory and crash reports what do I do from here?

    You do not have to do anything.
    They will automatic send to Apple for diagnostic.
    It's not meant for consumers to read.

  • There are several 10-byte files with names like InstallTime20100707134218 in my Crash reports folder. Is it safe to delete them?

    There are several files, each 10 bytes in size, in my Crash Reports folder. Each of these has a name which begins "InstallTime" and then consists of a bunch of numbers which appear to be a date and time. I think that each of them contains a number representing the Unix time of a crash.
    Are they safe to delete? Some of them appear to be a good few years old by now.

    Yes, you can remove those file. They are created each time a Firefox version is updated. I have a lot of nightly builds installed that get updated each day, so I clean out that folder every now and then and only leave the crashreporter.ini file.

  • Low Memory Error (Computer also reporting that my hard drive is almost filled)

    Is there a diagnostic tool or something else I can do to find out why I'm getting an low memory error?
    I have a Compaq Presario CQ60. I have 4.0GB of RAM and a 2.0 GHZ processor. 
    I only have 5GB left on my hard drive. That can't be right!  The drive is 285 GB total. What told me that I had a problem was when I removed 40GB of music that I ripped from my CD collection. I moved it off. It cleared up room on my HD until i rebooted it a few times. Then all 40GB were mysteriously gone.  Program Files is 17.0 GB, MyDocuments 4.88GB, Music 5GB, Pictures 900MB, Videos 400 MB.  Downloads folder 1.14GB. When i run Defrag from Windows 7 Home Premium, it fails.
    I can't believe I've run out of memory or hard drive space. I think something else is going on. I've been using this computer for years and what I'm doing now is no where near as intense as I've done in the past.
    Is there a tool i can download and run? At one time, my computer did restart and do a check on the Hard Drive sectors but it returned no errors.  I don't know what to do.

    Some very good tips here- includes tools to view what is using hdd space. (just be sure to ignore the ads)
    http://www.howtogeek.com/125923/7-ways-to-free-up-hard-disk-space-on-windows/
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • My Menu - Add a Query Print Layout to the Report Folder

    This is a newb question.  I can easily add a Query or form or most anything else to the Folders under My Menus ... But how can I add a specific Print Query Layout to the Reports folder un My Menu?
    I know it is simple but I can not find the steps in the documentation
    Thanks in advance!!! 
    Dana

    Kapil
    I tried that, but it adds the Query not the QPLD to the menu.
    I had figured that I could go the the QPLD memu and add the Report, but that adds the Query Print Layout Menu with all the reports.
    I feel like I am missing something very obvious here!!!
    Thanks for your quick response!!
    Dana

  • Where to place the oracle 10g forms and reports folder in Linux server

    Hi....
    Currently iam migrating a module to oracle 10g.
    All my modules which consists of form folders and report folders are inside a
    folder called PROJECT and placed in C:\ in windows server.
    So when i want to call a form or report i have used path as 'C:\PROJECT\module_name\form_name.fmx';
    Now my client wants his project to be used in LINUX based server.
    Now i want to know where i have to place my Project's form folder and reports folder
    and how i have to call them...
    thanx in advance

    Can you say how can i call reports as u said hardcoding the path while calling report is not a good practice.I agree with Dhiraj Madan, hardcoding paths is a very bad idea, your application becomes non-portable.
    For FORMS_PATH you can use default.env, as already said (or <your envfile>.env, if any).
    The same can be done for REPORTS_PATH, by using reports.sh script, in $ORACLE_HOME/bin.

  • A1000 low memory crashes

    IdeaTabA1000L-F, android 4.1.2, kernal 3.4.0, serial HGC1W5PYMany months ago i came on this site looking for a solution about my low memory problems, d/l a updated software fix for this which lasted a whole day. Installed an external sd card and moved irrelevent data to it, and still had problems. Lastly, just yesterday, i did a factory reset, and basically started over. My tab is telling me there are no updates and im running the latest version. On the web, playing games etc, i keep getting low memory warning in upper corner, and the browser crashes. Even with all the cache empty. Please help me so i dont do like the little kid on the nationwide commercial and throw this down on the cement!!!!!

    Exchanging an ipad for a software problem is not a solution. I am replying to everyone who complains about crashes. The ipad air along with OS7 was apparently rushed to market. It amazes me that the previous version of the ipad along with the operating system is more stable than the ipad air. How do you release something inferior to the previous model. I spent a lot of money on the ipad air because I purchased the model with 128mb of RAM. If I could go back in time I never would have done it based on the problems with this new OS.

  • Low memory crash

    I have very few applications on my 1st gen iPad, as I use it mostly for web browsing. However more and more it is crashing when using Safari or a game like Angry Birds. The diagnostics indicate a "low memory" crash. I have seen many forums including the Apple forum with this problem and it has never been addressed adequately by Apple.  There are a lot of user attempts but none of them work consistently. Is my iPad now an expensive paperweight after only 3 years? 

    Try this:
    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

  • [3.0.04] Delete user defined report folder

    Hello Forum,
    a few days ago, I got a new computer and exported my user defined reports from the old installation. After importing these into the new installation, all reports were put into an additional subfolder. Since I'm using german localization, the reports were put into "Benutzerdefinierte Berichte/Benutzerdefinierte Berichte". I could move them one folder up by cut and paste, but now I would like to delete the empty subfolder, but I don't have any menu options to do so.
    Is there any way to get rid of that subfolder?
    Many thanks in advance,
    dhalek

    Hi Binom,
    Correct. In fact similar behavior reported in earlier posts such as...
    Bug 2.1: Report folders are read only
    1.5.5 Cannot add user defined report to folder
    ...resulted in the logging of an internal bug:
    Bug 9231534 - FORUM:USER DEFINED REPORT FOLDER MISSING ACTIONS IN NON ENGLISH LOCALES
    I updated it with a reference to this forum thread in order to give it a bump.
    Thanks,
    Gary Graham
    SQL Developer Team
    Edited by: gggraham on Aug 1, 2011 1:30 PM

  • Report folder permission can not add group

    after upgrade to 11.1.1.2.0 ,when set report folder's permission, in the group list ,can only see "Administors", no other groups created by myself.
    how can i add other groups to this list?

    You are upgrading from which version to 11.1.1.2.0? Have you ensured that these groups are present in your LDAP?

Maybe you are looking for

  • How to read master data in transformation routine?

    Hi gurus, I am loading data from 0HR_PA_0 data source. I have 2 fields in the DS: PERNR (Personal Number) and CALMONTH (Calendar year/month). I need to read 0EMPLOYEE's attribute 0ENTRYDATE and count the difference between Entry date and Calendar yea

  • Clicking doesn't work to select Tools in Muse. Is there a fix?

    I am unable to click on the different tools in the toolbar in Adobe Muse CC (2014.5.0.569) in Windows 7. The toolbar does not recognize mouse clicks and even register a hovering cursor (i.e. I can't click and select the Text Tool or Hand Tool). Likew

  • Connections between two host using Pro*C/C++ precompiler

    Hello everybody I'm trying to connect to an Oracle database using an program written in C that it's running in another host where the database is. I put the following command: EXEC SQL CONNECT :login IDENTIFIED BY :password AT :host; I don't know if

  • National Language Support

    Hi all, I use JDeveloper3.2 and Oracle 8.1.7 with ZHS16CGB character set.Hit errors while compile the application,it said 'This version of JDK does not support GBK character set',what does it mean? Any boday have experience for multibytes characters

  • LiveType in FCE4

    Hello All! I'm planning to uninstall the Livetype Version that comes with my FCE4 upgrade and re-install the original LiveType version that comes with my FCE-HD that was released 3 years ago Will this work without problems with Leopard? (OS X 10.5.4)