LP24 how system work?

Hello :
I have set material master like this:
Min = 1000 qty replenishment 100qty
no stock in fixed bin at all
when run LP24 on fixed bin , listing appear, then click MATERIAL STAGING
message "selected one line with requested qty > zero"
and no picking requests create at all.
Please advise.

HI,
Check the examples provided by sap and try it in your scenario,
Example 1:
Material stock in storage area = 5
Minimum stock of the material = 10
Maximum stock of the material = 100
Defined replenishment quantity = 40
Since the material stock in the storage type exceeds the defined minimum stock level, the system calculates a requested quantity and attempts to increase the stock in the warehouse type (5 pieces) in whole steps of the replenishment quantity (40 pieces) to the maximum quantity (100 pieces) without exceeding this quantity.
The system therefore determines a requested quantity of 80 pieces.
(5 pieces + 2 * 40 pieces = 85 pieces < 100 pieces)
Example 2:
Material stock in storage type = 5
Minimum stock level of the material = 10
Maximum stock level of the material = 100
Defined replenishment quantity = 0 (not defined in material master record)
The material stock in the storage type exceeds the minimum stock level and the system calculates a requested quantity. Since you have not defined a replenishment quantity in the material master record, the required quantity is equal to the maximum stock minus the storage bin stock.
The system therefore determines a required quantity of 95 pieces.
Regards
KK

Similar Messages

How system works in back ground while procure ment

Can anyone let know how system works while procurement cycle and postn to respective gl is done,,
and tables gets updated...

please dont reply accounting entries ......... reply with background process ,,like how system will pick the inventory posting BSX and others.

Urgent help need:How inventory system and fulfillment system work

Hi Every one ,
I have an requirement to work on inventory and fulfillment system,below are my questions,
1)I have stock level quantity for an sku is 2 ,if one user done with his order with quantity of 2 then how we can show quantity to the second customer (if stock not available we gone loss the business )
how we can handle this ?
2)There are few orders are completed(if some are orders are having quantity available in stock some or backorders)
here how the fulfillment system understand those orders and how it will update the inventory.
Could you please any one help me how to work on above requirements or else give me some other solutions to full fill above .
Regards,
Jyothi Chidurala
Edited by: Jyothi.mj on May 22, 2013 5:08 AM
Edited by: Jyothi.mj on May 23, 2013 4:28 AM

>
1)I have stock level quantity for an sku is 2 ,if one user done with his order with quantity of 2 then how we can show quantity to the second customer (if stock not available we gone loss the business )
how we can handle this ?
you can always call InventoryManager.AVAILABILITY_STATUS_IN_STOCK to check whether the item is available in inventory , It is the business call if item not available how they want to handle this .
hope this helps

How does the fault system work with AppleCare warranty extension?

I'm an owner of an iPhone 4S on Telus Mobility in Canada and I have two year AppleCare warranty extension that is linked to my phone. I've had my iPhone for over a year now with no issues, so this question is meant for reference if and when I do need to make a claim.
When I bought my AppleCare, the representative never explained to me how the fault system works, or if and what I pay in the event of a claim, or really anything else related to AppleCare. My friend told me if I pay a certain amount of money during a claim, I can get a new iPhone. Is this true? Are there limitations of the AppleCare?
Could somebody please explain to me in a fairly decent amount of detail how AppleCare works, how the fault system works, and anything else I would need to know about AppleCare? Thanks.

Here's the link explaining it:
http://www.apple.com/support/products/iphone.html
This would work in the U.S. - I think (but am not sure) it will work in Canada as well.

How does point system works?

Dear all,
I am wondering how this point system works? I had 915 points this morning and now end up with 905. Instead of going up, it fluctuates from time to time. Initially, it use to show up next to my name with 915 but then that went down to 514???
Is it only me or someone else has seen this behaviour?
I am not points buff but it seems pretty strange that one day infact in the same day the numbers fluctuates like they do in stock exchange.
Regards
Jehanzeb

>
Amit Gujargoud wrote:
> I think you misunderstood His words and take it hard. Iu2019m sure he actually
> meant in a Cool way. Letu2019s wait until his morning, he will come to you with more cool way
Nope, in this case, Kartik already has "the hard way" behind him.
During an investigation into a nest of points gamers in October last year, Kartik was investigated as well for having for having participated in one of the threads. There were many being investigated. Other symptoms matched (we have some strict rules for this) - so the mistake was perhaps understandable - but on the other hand I should perhaps have looked a bit further to see that Kartik's post patterns were different to those of the others (who were not located very far away from Kartik..).
Anyway... as they faded away into the annual ponits total of those who are being transported into the world where the A.G. calendar is used ( Anno Guestus ) ... Kartik's ID faded away with them.
Kartik contacted me about it and I took his word for the expanation that he was not involved. I am very glad that I did that, as he has been a big help in the ABAP forums.
I don't have the exact figures, but last I heard we have deleted more than 50 thousand user ID's for ponits gaming. I am always very carefull when investigating this and there are other people who check it as well before any action is taken.
To date, to my knowledge, Kartik has been the only mistake we have made. Others have begged for mercy, but that is different. Hence my comment that he should wear the difference like a "battle scar" caused by the "journal entry", until Micheal can possibly fix it.
As you can see, "we are all guilty of something" (quote: Inspector Vimes)
Cheers,
Julius

TA38556 I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network. How do I accomplish this with ap

I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network before access the internet. How do I accomplish this with apple? Please help.

There are some other options to you, if you're not at home and nobody is using your router you could set it up at the hospital, if this isn't an option you could get a second router and use it. Many ethernet routers are available on the cheap, and ethernet cables are cheap too.
Also, a macbook can share it's internet via the built in wifi it has. See this go to settings-sharing-internet sharing and configure as desired. This may require an internet connection via ethernet. But you should be able to create a wifi network for using something like airplay/home sharing.

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Once you get familiar with the Mac, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

How notification system work together with Acrobat X Pro?

Hi everyone,
I use Adobe Acrobat 10 Pro to implement Distributed PDF Form in my organization. I have some problem about this.
When client fill information in application form on our distribution server,Do you have solution that Acrobat 10 Pro can send a notification to specific authorized
prerson for his/her Digital Signature?
example : Mr.A filled some information about Purchase Order. System require his supervisor's digital signature so, Acrobat send notification to his supervisor automatically.
I have some idea about Active Directory work together with Acrobat but, I don't know how to use both of it together.
Any advice will help me so much.
Best Regards,
Charles
PS. sorry about my poor english

Thank you so much about your suggestion.
Do you know how i can integrate Acrobat X Pro with Active Directory?
I look forwarding to hear from you.Thank you.
Chompunoot
Date: Thu, 2 Jun 2011 19:29:41 -0600
From: [email protected]
To: [email protected]
Subject: How notification system work together with Acrobat X Pro?
Hi Charles,
You want to modify the signature field properties and set a script to execute when the field is signed.
Here's how to get started in Acrobat X:
Open the file that will eventually be uploaded to the server
Click Tools on the top right to open the Tools panel
Expand Forms (click on Forms so you can see the buttons underneath)
Click the Edit button
Right mouse click on the first signature field and then click Properties from the pop-up menu
Select the Signed tab on the Digital Signature Properties dialog
Select the This script executes when the field is signed radio button
Click the Edit button
Add the following in the JavaScript Editor dialog:
          var cMyMsg = "Please log on the server and sign the document";
          app.mailMsg ({
              bUI: true,
              cTo: "mailto:[email protected]",
              cSubject: "A document requires your attention",
              cMsg: cMyMsg
Click the OK button on the JavaScript Editor dialog
Click the Close button on the Digital Signature Properties dialog
Click the Close Form Editing button in the Forms panel under Tools
Save the PDF file
It's going to look something like this:
http://forums.adobe.com/servlet/JiveServlet/showImage/70913/SignScript.jpg
Give that a try and from and see what you think. You can set the strings as necessary and repeat for each signature field (except for the last one )
Steve
>

Want to see how System 7 works?

Want to see how System 7 works, click on this link.
http://www.myoldmac.net/webse-e-flash.htm
Then click around on the System 7 desktop.
Cheers, Tom

Great!
Myoldmac is located in Berlin-has got great stuff!

How the antenna system works

I was researching something else and ran across some info written by iFixit.
It was talking about the problem with calls on the ATT network and said:
"Apple has gone a step further and tuned the phone to utilize whichever network band is less congested or has the least interference for the best signal quality, regardless of the actual signal strength. Early reports suggest this feature, while buggy in its early stages, will greatly improve the phone's reliability on AT&T's fragile network."
Interesting, considering how some people have talked about worse signals. Maybe that isn't because of worse reception, but the software simply choosing a weaker, but less congested, tower.
I can easily see how this process could screw things up as well as make things better, depending on the details of how it works.

With no doubt At&t is the fastest network out there...their internet speed is already close to 4G from sprint...i dont care how well they make verizon sound good they have the slowest network of all the us carriers...people complain about AT&T .... I dont get why nobody complains about other network being slow...ive compared my old 3GS with the best sprint, t-mobile, verizon has to offer...and they are slower compared to At&t unless its on 4G...which is not even that fast...let alone 4G phones eat a lot of battery life...

Using icloud, photo stream how its works on windows system??

Hey, i want to used photo stream option vai icloud, but unable to know how its works or use, pls help me out??

http://support.apple.com/kb/HT4486

How IE works for flat file

Hi all:
As we all know that, when IE gets a idoc's service name from SLD, then use it with idoc's message type and Idoc type to do receiver determniation, what about flat file ? how can we know its Service name and interface name if there is only a flat file on FTP? how IE works for Flat file ?
Couldn't thank you more

Hi,
For any idoc scenarious, you would use business systems rather than business service which is stored in SLD. So the IE would fetch it from SLD at runtime.
For file based scenarious also, you can create business system as type third party and use the same.
Is that answer your question?
Regards
Krish

How to work with EEWB tool in CRM and how to assign it to PCUI

Hi Friends,
Can any body will suggest me how to work with EEWB tool in CRM to add new fields ,i need to attach the fields to a GUI screen and same to PCUI also,
And how to attach a search help for those fields,is the tool will automatically will create the search helps or it is similar as we do in abap,
So can any body suggest me to get a material on this ,
Thaking you
Regards
Raghavendra Prasad

Prasad
Following are the steps involved in general :
1. Select the filter Worklist and enter your name in the input field of the object list selection. Press the enter key. Your object list is displayed.
2. Place your cursor on the highest node(PROJECT BY XXXXXX). Select Create project from the context menu by right-clicking on it. You see the dialog box Create project.
3. Enter a project name, description, packages, and namespaces for each system used. Leave the dialog box by pressing the enter key.
Specify transport requests. The Project is created and appears in the object list.
4. Place your cursor on the new project in the object list and select Create extension in the context menu. You see the dialog box Create extension.
5. Enter a name and description. Define a Business Object and extension type. Press the enter key.The extension is created and appears in the object list below the project.
6. Place your cursor on the new extension in the object list and select Call wizard in the context menu. The wizard for the extension action starts automatically.
7. Fill in the input fields following the notes on screen and end the wizard by clicking on Complete.The extension tasks have been created and appear in the object list.
Project and extension are created !
Also take care that you have the Transport Requests and Save the Project and Extensions against a Development Class !
In general , EEW will automatically puts the fields on the Screen. We donot want to worry abt that !
The generated BADIs can be implemented to do some Checks(for example) !
I hope this helps !
Thanks
<b>Allot points if this helps !</b>

Foreign Currency Translation at Year End - How SAP Works for P&L items?

Hi All,
I wanted to know "How SAP works on Foreign Currency Translation at year end" from Local Currency to Group Currency for P&L Items.
I know how SAP works for Balance sheet items but am really confused with when the translation was done for P&L Items.
Configuration:
We are on ECC 6.0 . Local Currency is CAD and we have 2nd Local Currency as "USD - Group Curr".
We have set up Valuation Method - 4
We have set up Valuation Area - 40
For Account Determination for Currency Translation, GL accounts (Loss, Gain and B/S Adj) were setup for the combination of Chart of Accounts, Val Area and Fin Stmt Ver.
Sales Account Balance
CAD (LC)        USD (2nd LC)
1000                   920
Using tcode "FAGL_FC_TRANS", we translated our P&L items.
Local Currency is CAD and Group Currency is USD.
CAD 1000 and USD 920 are cumulative balances over a period of time.
Since at the end of year CAD became stronger, exchange rate is 1.11 as an example
Sales Account Balance
CAD (LC)        USD (2nd LC)        Translated Value in USD
1000                   920                        900
System passed the following entry in USD:
Debit Balance Sheet Adj A/c 20
Credit Translation Gain / Loss A/c 20
Here are the questions:
1. How does over all translation work? - Should we get any Gain / Loss and have an effect on P&L when all accounts (P&L, B/S) are translated?
2. How can there be a gain entry when USD value has really fallen from 920 to 900 in the current case.
Thanks for your time.
Vijay

Hi,
I had this issue too. The entry was just opposite to what it should be. I just flipped the accounts in table FAGL_T030TR.
Example: 410000 is sales account which normally should have a credit balance. Here are some entries that were posted to sales in 03/2009 and I am running FAGL_FC_TRANS at the end of the month.
March 1, 2009 Cr. Sales CAD 1000- USD 900-
March 2, 2009 Cr. Sales CAD 500- USD 480-
During FC translation transaction, system takes the balance in the account for the period (if you execute it with 'Val. period balance only' checkbox checked) and not the cumulative balance. SAP recommends translating period balance only (and not cumulative balance) for P&L accounts. It sees a balance in LC (this again depends on the config. you have in OB22 - whether the indicator is 1 (TC as source currency) or 2 (LC as source currency for translation)) which is 1500, converts that at month end rate. After conversion, lets say the balance is 1400-.
In this case, we expect a credit entry on sales account
March 31, 2009 Cr. Sales CAD 0 USD 20-
But system was just posting the opposite. I then flipped the accounts in FC translation configuration. I know it is misleading. In that configuration, system says balance sheet adjustment account, but what you should actually give there is your gain/loss account. Our gain/loss a/c. falls in the same GL account range as the main account. For example, for 410000, it is 410999 and for 510000, it is 510999. We report accounts 410000 to 410999 in the same node in the FSV.
Pl. feel free to ask further questions about this. Pl. test in your system and correct me if my above reply is wrong.
Cheers!

Trying to understand how beans work.

I can't seem to figure out how beans work. Or more specifically how to target different parts of a bean. I think not knowing the terminology is a big part of this confusion too.
For instance. I have a jsp file and a bean. the jsp has a form input that submits to itself. the bean gets the info that was typed in and displays is in the <%= etcetc %> tag. Now, what im trying to do is also submit that value to my mysql db. This has created numerous problems for me. For one, i don't really know how to check if it's working (other than actually looking at the DB table). The other problem is how do i target that part of the bean to tell it to do that function (again, the terminolgy eludes me).
I'll post all of the code. There is a good chance that the DB code wont work. I'm really just hoping someone can explain to me
how i call the DB function from the JSP file.
I mean, is this even possible? Or do i need seperate beans for everything?? It seems kind of silly to not be able to do this.
ok, so here is the code.
JSP:

<%@ page errorPage="myError.jsp?from=hello.jsp"%>
<jsp:useBean id="simpleBean" scope="page" class="jspbook.ch3.simpleBean"/>

<jsp:setProperty name="simpleBean" property="fname"/>
<html>
<head>
     <title>Hello</title>
</head>
<body>
<center>
     <b><%= simpleBean.welcomeMsg() %></b>
</center>
<table align="center">
     <tr>
          <td>
               <form name="sdfsdf" action="test.jsp" method="post">
               <input type="text" name="fname" value="">
               <input type="submit" name="submit" value="submit">
               </form>
          </td>
     </tr>
</table>
</body>
</html>and here is the bean
package jspbook.ch3;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
public class simpleBean implements java.io.Serializable {
   private String emplid;
   private Connection con = null;
   private ResultSet rs = null;
   private PreparedStatement st = null;
   /* Member Variables */
   private String lname;
   private String fname;
public simpleBean()
        try
          Class.forName("org.gjt.mm.mysql.Driver");
          Connection con = DriverManager.getConnection("jdbc:mysql://localhost:3306/stm?user=root&password=");
    catch(Exception e)
          System.out.println(e.getMessage());
      /* Initialize bean properties */
    setLname("");
    setFname("");
/* Accessor Methods */
public String getLname() {
    return lname;
public void setLname(String _lname) {
    lname = _lname;
public String getFname() {
    return fname;
public void setFname(String _fname) {
    fname = _fname;
/* Display personalized message */
public String welcomeMsg() {
    return "Hello " + fname + " " + lname +
      ", welcome to the wonderful world of JavaBeans!";
      public void insert()
       try
            String s1="insert into commstream (commTitle) values('"+fname+"')";
            st = con.prepareStatement(s1);
            st.executeUpdate();
            st.clearParameters();
            st.close();
       catch(Exception m)
}So there it is. If someone can explain the fundamentals to me, that would be great. What would also be great is if someone can make the above code work :)
I've checked online tuts/specs on this, but to be honest im just not grasping it.

iPhoto is a relational database program
In the strongly recommended managed library (you have chosen to ignore this recommendation and use a referenced library) imported photos are copied to the iPhoto library and stored in the originals folder, a thumbnail jPEG is created and places in the data folder and when any modification is made (including autorotation) a modified version of the photo is created and placed in the modified folder. iPhoto updates its database entries to reflect everything it does.
It is critical that you do not make any modifications of any sort to the content or structure of the iPhoto library - doing so is likely to corrupt the library and cause you to lose data.
When you use the referenced mode which you are doing (and which is not recommended) you are taking total responsibility for the original photos which included not moving or modifying them while iPhoto is referencing them
Unfortunately, all pictures from a certain import has duplicated in iPhoto.... so I "moved to trash" all pictures from that import
Did you do this with the iPhoto trash? or did you use the finder to modify the contents of the iPhoto library.
If I "move to trash", I assumed it got rid of whatever index (and preview cache) to that particular JPEG. I was actually surprised it did not delete the actual JPEG but I'm ok with that.
again - iPhoto trash or finder trash. If you move a photo to the iPhoto trash and empty it all traces of that photo in the iPhoto library will be removed - nothing will be done to any file outside of the iPhoto library -- ever
LN

LP24 how system work?

Similar Messages

Maybe you are looking for