LR5 does not see my Photoshop-CC ??

I installed Photoshop CC last night, but LR does not seem to see it, and still points to by CS6 install.
I renamed the CS6 folder to see what happened, and it grayed-out the "edit-in" for Photoshop.
Anyone else see this??
(Windows-7)

I cannot recall if CS3 from CS2 had this issue, or if it was CS3 to CS4, but there was a point, where Brushes (and Actions, IIRC), were changed enough, so that most would not translate to the newer version. Someone with a much better memory of such can probably give you specifics.
Good luck,
Hunt

Similar Messages

Photoshop elements 10 does not see my scanner

I have elements 10, windows 7, a pixma mx882 scanner, printer, fax combo. I can print, but it does not see my scanner. Help.

This tech note should help:
TWAIN is not installed with Photoshop Elements versions 9 and 10

My mac Doesn't seem to see my external hard drive (seagate 1tb) I have it usb'd in to the back of my computer, but when I open time machine...it does not see it. Help

My mac Doesn't seem to see my external hard drive (seagate 1tb) I have it usb'd in to the back of my computer, but when I open time machine...it does not see it. Help...please

Yes...at least I thought it was....I have 10.6.8.
That's the whole issue. I want to run/install photoshop elements but I have to have 10.8. for that. So...be fore I install an upgrade (Yosemite is getting BAD press) I thought I'd check my back up...it's not there...I have the seagate plugged in and the usb into the back of the mac...when I try to turn the time machine "ON" it says airport device not found not ....
By the way...I REALLY appreciate the help here....

Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

Kitty,
Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
then:
As for your issue, make sure all applicable scripts are checked in Bridge preferences:

Extension manager does not see all of my adobe programs?? What can i do without reinstalling????

Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0

Same issue. Doesn't see Dreamweaver.

Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

Attached is screen shot. What happens is I go to File/Automate/Merge to HDR Pro, then select my 3 images, which are flattened psd files (I have tried tifs and jogs too), hit OK, it processes them, but instead of the image appearing, I get this black image. You can see my original images at bottom... jpegs too),

Lightroom 2.6 does not see CS-4 in Windows 7

This issue is new with my laptop system. I installed CS-4 (32 and 64 bit) and Lightroom (64 bit-it says). All was working fine during my initial tests with images but I don't use the laptop frequently. Now that I am away from home and trying to take photos from Lightroom to Photoshop for advanced editing Lightroom does not see any of my Photoshop installations.
Any ideas??
Thanks,
Jim

Even though this happens with Google Chrome as well, try trouble shooting Safari extensions...
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Lightroom does not see my iPhoto Library

Lightroom does not see my iPhoto Library

Unfortunately, importing from iPhoto to Adobe Photoshop Lightroom is harder than it should be but there is an efficient solution. The secret to creating a new Adobe Photoshop Lightroom Catalog from an existing iPhoto image library is to download and install the free-trial version of Photoshop Elements 12. This sounds completely bizarre, but Photoshop Lightroom lacks the ability to import directly from iPhoto and iPhoto lacks a merge with Lightroom feature. Although Lightroom cannot import images from your existing iPhoto library, Photoshop Elements 12 can!
Even the free-trial version of Photoshop Elements 12 has the ability to import from iPhoto and then Lightroom 5 can import from Elements. Photoshop Elements 12 is ironically the missing link for those looking to move their images from iPhoto into Lightroom.
Learn more about How To Import Your iPhoto Library Into Adobe Photoshop Lightroom at http://bit.ly/1sNdss2

ITunes does not "see" photo

Hi:
In trying to import photo(s)to the phone, iTunes consistantly ignores/does not see one of the photos. Using Photoshop or a file folder on a WinXP PC, iTunes recognizes all the photos except this one. The photo in question is display-able/copy-able, and both PS and the file manager see it, display it -- and can manipulate it. Have tried to edit it in PS to determine if there is some problem, but it saves it as a jpeg with no problems, etc. The file is a 64 KB image. It will not load either from a folder or from a PS album, while all the other 24 load fine... Is there some "secret" metadata that might prevent iTunes from loading a file?
Thanks in advance.

OK, looks like I am making progress. The suggestion to change the one file to .tiff worked! The photo did load to the phone and iTunes counted it in the total (25).
But deleting the cache (?) created another issue...
In iTunes once I deleted the cache, then disconnected the phone, then re-connected it, iTunes then indicated no info about the number of photos in the folder. Then when I selected to sync, iTunes reported "currently sync'ed to another library... ...do you want..." (or something like that...). I selected to go ahead and sync. Now there is a rundundant "Photo Library" on the phone with all the same photos in it. How do I remove it/prevent this from happening again?

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

I'm having the same issue with a file called IMG_2353.MOV that was imported into iPhoto from my iPhone and also have to manually select the items to import (so the rogue file doesn't error everything out). I've tried using Image Capture to locate/delete the file directly from my iPhone, but even though I can SEE it in Image Capture, I can't delete it or anything. This is VERY frustrating! My friend/Apple guru's only suggestion was to backup my phone then restore it through iTunes. Risky but should do the trick. I'm too scared to try, though!

My computer does not see my printer

Hi: I am having a problem with my HP Photosmart 4500 printer. My computer does not see it. I have a USB connected to it, have uninstalled and installed the software two time, dowloaded the latest update and nothing. Add to that, I can not connect it by WIFI. WIFI on the printer is on but again, it's no where on any of the screens. The only variable I can think of that has changed has been the router I got recently from AT&T. Everything else works with the WIFI but no computer. I'm running 10.7.5. I have read the install instructions and nothing seems to be working. The one thing I do get from the HP install disc is a message reading the printer isn't recognized but there are no updates in support. OK, what am I missing here?

Try these steps to uninstall the current software using the HP scrubber and then reinstall using the current HP driver available through Apple.
To do so, perform the following steps:
1. Go to Applications/Hewlett Packard/ and then click on “HP Uninstaller”
2. Next click “Continue”
3. Highlight the device on the left pane.
4. Press and hold control+alt+command on the keyboard simultaneously while you click on “Uninstall”.
5. After you do this, you will see a pop up that asks you if you want to uninstall all HP software. Please note, that in doing this, it will remove any other HP printers that you also have installed.
6. Click “continue” and wait for the program to finish.
7. After it completes, reboot your computer.
Once the computer is back on, do the following steps:
WARNING: This is will delete all of your printers.
1. Go into “System Preferences” and then select either “Print & Scan” or "Print & Fax".
2. Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.
After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
You can do this two ways. First, check for any available HP Update's by clicking the Apple icon and then Software Update. If there are any updates available, they should show up here. However, if the printer is connected by USB, it will not show any available updates. The other option is downloading the drivers from Apple's website.
You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
Once you have downloaded the driver package and completed the installation, you will want to plug your printer back in (if you were using a USB connection). After the printer is plugged back in, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box. Make sure that says the name of your printer and not AirPrint. If you are using the printer wirelessly, make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
Best of luck,
Kyle

My mac does not see my printer

my mac does not see my printer

Is the printer physically connected to the computer with a cable, or is it wireless. Did you install the printer drivers from the manufacturers web site, for your specific OS?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

After upgrading to Mavericks my iMac does not see Sony camcorder in iMovie anymore. It still works on MacBook, so nothing wrong with camera or connections.

After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
Anybody with the same problem or a solution?
Thanks mbkom

Try this

LR5 does not see my Photoshop-CC ??

Similar Messages

Maybe you are looking for