LSMW for VL09 (Reverse OBD)

Hi,
I try to create a LSMW for VL09.
When i'm doing the initial Recording.
I'm Getting and errors saying.
"No default name could be found for field LOW"
"No default name could be found for field 'LF_ANAUS'."
Any idea y im getting error like this
Thanks
Uwanthi

Not sure whether a field by name LOW and ANAUS are available. Moreover, via VL09 itself, you can mass reverse the delivery and is it still necessary to create LSMW for VL09 ??
thanks
G. Lakshmipathi

Similar Messages

IDoc Message Type for VL09

Hi,
Is there an IDoc message type for VL09 (Reverse Goods Issue) for Delivery. Do let me know please.
We are using an ECC 6.0 system (WebAS 700)
Regards,
Aditya

Hi,
You can use this message type MBGMCA, IDoc type MBGMCA01 and process code BAPI.
This process code will call FM IDOC_INPUT_MBGMCA to reverse good movements with MB_CANCEL_GOODS_MOVEMENT.
Regards,
Ferry Lianto

Which BAPI to use for GR for PO reversal (mvt 102)?

I'm trying for look for a BAPI that can used to post GR for PO reversal, which is mvt 102. I try to use BAPI_GOODSMVT_CREATE to do it, but I encounter errors, I have tried different set of parameters, but all are not sucessful. Below is the few set of parameters that I tried:
1)
goodsmvt_code-gm_code       = '06' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date    = sy-datum.
goodsmvt_item-stge_loc   = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item    = v_poline.
goodsmvt_item-move_type = '101'.
goodsmvt_item-entry_qnt = v_qty.
goodsmvt_item-XSTOB      = 'X'.
Error message: Goods movement not possible with mvmt type 102
2)
goodsmvt_code-gm_code       = '06' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date    = sy-datum.
goodsmvt_item-stge_loc   = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item    = v_poline.
goodsmvt_item-move_type = '102'.
goodsmvt_item-entry_qnt = v_qty.
Error message: Goods movement not possible with mvmt type 102
3)
goodsmvt_code-gm_code       = '01' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date    = sy-datum.
goodsmvt_item-stge_loc   = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item    = v_poline.
goodsmvt_item-move_type = '102'.
goodsmvt_item-entry_qnt = v_qty.
goodsmvt_item-mvt_ind    = 'B'.
Error Message: No goods receipt possible for purchase order 5000000017 00001
Does anybody knows the correct parameters for mvt 102? Or I'm using the wrong BAPI ? Please kindly help.

Hi,
the basic thing i guess is first you have reverse the PGI done in may now at the current date as the periods would have been closed for the previous months. And if it is in production then you cannot do a posting in a previous month just because, you would be forced to open the previos periods causing inconsitency in the chronology. But however there is a possibility of allowing posting in previous periods also by using MMRV. Pl try. but make sure it is acceptable for the business and does nt affect any other areas. But it might just do so.
Use T.code VL09 or use BAPI_GOODSMVT_CANCEL
refer the link
https://forums.sdn.sap.com/click.jspa?searchID=3586093&messageID=3598826
Regards

T. Code for Mass reversal of IV documents

hi,
We use the T. Code MR8M for IV document reversal. what is the T. Code for Mass reversal of IV documents.
Tx

Hi ,
MR8M is the only T code for reversal of IV documents.
You can use LSMW of MR8M for temporary requirement , in case if your frequency of requirement is high then use a BDC programme for the same .
Hope this helps .
Regards ,
Dewang T.

Creation Of LSMW for Actions..........

Dear ALL
Recorded an LSMW for PA40 hiring actions which includes infogroup - [ IT 0000, 0001, 0002, 0105-ZVEN (Sub type)]
This is for external vendor employees hiring actions.
While recording or manually running the process, it is working fine.
When in foregroud or background process, the alternate pernr is getting generated. Say for 1st record , pernr generated is 80023, then for next it is 80025, 80027so on.
Kindly suggest me in this issue.
Thanks
MJ

Hi,
1-you keep no range as external and assign PERNR sequentially so that it remains same as you want it
2-kindly go through the LSMW abain to see what have you assigned in field mapping & conversion rules
3- check one record created thru LSMW and see if next (alternate number gets assigned to Ref PERNR in IT0000)
Check the alternate number to see if anything gets assigned to it.
salil

How to create LSMW for a transaction having scroll bar

Hi all,
I am trying to create an LSMW for MP)! transaction for Uploading AMPL (Approved Manufacturer Parts list data) data.
For this LSMW is not working fine when i need to upload more number of records. Suggest me some way to solve it out,Also provide me some code samples and process if it can be handled with BDC.
Thanks,
Pavan.

you can solve it with bdc:
e.g. a table control contains only 10 entries , you've to program the dynpro-change ( in german "Bildwechsel")
with sth like this:
ERG = BUZEI MOD 10 .
IF ERG = 1.
Dynpro darf nur alle 10 Zeilen prozessiert werden -
PERFORM BDC_DYNPRO USING 'SAPMF10B' '0150'. "ins
ENDIF.
add 1 to buzei.
A.

Error in the LSMW for vendor master using standard batch/direct input

I am facing the problem in the LSMW for the Vendor master data. The vendor is initially created for the company code 350 by using LSMW. NOw when I try to uploasd the same vendor using the same LSMW for the company code 450 then I get the error in the Bach input creation as follows:
Batch Input Interface for Vendors
FB012                    Session 1 : Special character for 'empty field' is /
FB007                    Session 1 session name VNDR_CREATE_ was opened
FB104                    Trans. 2 XK01 : Acct already exists; general area not being processed
FB125                    ... Data in table BLFA1 cannot be processed
FB016                    ... Last header record ...
FB014                    ... BLF00-STYPE 1
FB014                    ... BLF00-TCODE XK01
FB014                    ... BLF00-LIFNR 300951
FB014                    ... BLF00-BUKRS 402
FB014                    ... BLF00-EKORG /
FB014                    ... BLF00-KTOKK VEND
FB017                    ... Last data record ...
FB014                    ... BLFA1-STYPE 2
FB014                    ... BLFA1-TBNAM BLFA1
FB014                    ... BLFA1-ANRED /
FB014                    ... BLFA1-NAME1 SAVOIE AUTOMATISME DEXIS
This is because when we use XK01 to create the vendor by using the

Please check this answered link:
Re: LSMW for Vendor Master
LSMW Upload vendor master data
Edited by: Afshad Irani on May 5, 2010 12:42 PM

Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
Regards
Fawaaz

Hi Guys,
Thanks so much for all the prompt responses. My issue is now resolved.
The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
Thanks again.
Regards
Fawaaz

Classification view creation via LSMW for Material master

Hi,
We are planning to have an LSMW for creation of material master along with classification view for configurable materials.
Though we see a flag to indicate classification view - XEIC1 Indicator: take Classification view into account
We do not see a structure where in we can pass all the characteristics and the corresponding values.
Is this something possible only with BAPIs such as -> BAPI_OBJCL_CREATE after creation of other view for that material.
Regards,
HR

Hi,
Thanks for the response. This is helpful.
However, we were intending to use a single LSMW for creation of all views of material master including classification view. Right now we are using Program RMDATIND as direct input method in LSMW.
Please let me know if there is a way to use single LSMW for creation of all views of material master.
Thanks
HR
Edited by: Hema Rao on Jan 8, 2009 7:58 AM

Issue in LSMW for material master using standard input program RMDATIND!!

Hello guys,
I have a issue in LSMW for material master.
I have a custom field in MARA table. which I want to add in my LSMW.
I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
Is there anything else I need to do apart from addition of field in the structure BMMH1.
Thanks in advance for your help.
Regards,
Sumeet....

see oss note 44410, it gives you a step by step overview.
https://service.sap.com/sap/support/notes/44410

Creation of lsmw for updation of position and pers area

Hi friends,
I am tried many time to update position and personnel area through lsmw for all employees ,at time of recording its coming.But once compltion of lsmw preparation i am uploaded my inputs through tabfile that time its updating only personnel number and infotype and its asking the save the action screen (At the same time its showing one popup below screen like there is no recording for mp000000).Can you tell any one there whats the problem.At the same time is it possible to upload the position and personnel area through lsmw.
Thanks,
arjun.

Hi Arjun
Are you performing a hiring actions, if you are performing a hiring action, when you start with LSMW, the recording should be correct with hire date or start date, personnel number, reason for hire, position number, personal area, employee group and subgroup.
The source field you specific should contain the required field name, type, length and field discription. The field mapping should be done perfectly and assign the specified file in txt format and try to upload.
If you are facing any problem, let me know. I think I can help you
Regards
Santhosh.S

Is it possible to create LSMW for PQ10, PQ13?

Hi Fridz,
I have created the OM actions, now I'm trying to create LSMW for the actions PQ10 (creation of org unit), PQ13 (Creation of Position) but while recording LSMW relationships are not creating under - Maintain Field Mapping and Conversion Rules in LSMW. Please advice on this whether these transactions are possible to create LSMW with fore & backgroung.
$Narayana

Hi Narayana,
Use BDC's for better maintainance of relationship. which worked fine for me.
thanks,
vasu.

LSMW for Outbound Delivery

Hi,
I am not able to find an LSMW for creating GR for outbound delivery. I tried using recording in MIGO but it did not work. Also MB1C is not working for outbound delivery. Please help.
Regards,
Anubhav

Hi
I think it is better to write a Z program/ BDC to have a mass GR creation of an outbound delivery.
or
You have an Auto Goods receipt using confimations. If we activate Auto GR in customizing for Confirmation control key. Once confirmations(ASN) is created a GR will be created automatically.
Hope this helps
Regards,
Sasi

A small logical problem in LSMW for MM01...

I need to create a LSMW for MM01 transaction, wherein I have to check the initial four
digits of the material as 'ORCL'. If initial four digits of the
incoming material are 'ORCL', then create this material as it is.
Else replace these four digits with 'SAPM' (for sap material) while
creating this material.
This will differentiate between materials coming from Oracle and non
oracle system.
I know that I need to create a new rule in the step 5 of LSMW: "Maintain Field Mapping and Conversion Rules", under the ABAP heading.
But, how should the rule proceed??
Pls help me out!!!

awesome! thnks a lot naimesh.... you are tooo goood!
Can you please help me again...??
Now, I need to replace the records which are not 'ORCLXXX' with SAPXXX format. For example, say a record has the material number as ORCL007. This will pass on and created as ORCL007. If a record has the material number as MMMM007, this should be converted to SAPM007.
Should I use fieldsymbols for this, or just replace the strings??
This will be the last, I promise....

LSMW FOR P.O UPLOAD

Hi Guys,
I am using LSMW for uploading the Purchase order. This I could able to do without any problem for single line item P.O.
This was done by recordning method.
Can some one explain how to upload purchase order for more that one line item.
Thanks,
Dhanu
Edited by: Dhananjayappa E on Jul 30, 2008 4:40 PM
Edited by: Dhananjayappa E on Jul 30, 2008 4:40 PM

It is Somewhat Difficult to Contol Screen Variables While Using LSMW. If the Data is Bulk Use BDC with the Help of Abaper.
http://aspalliance.com/1130_Batch_Data_Communication_BDC_in_SAP_R3
http://abap-gallery.blogspot.com/2007/08/bdc-batch-data-communication-tutorial.html
http://it.toolbox.com/wiki//index.php/Bdc
Regards,
Ashok

LSMW for VL09 (Reverse OBD)

Similar Messages

Maybe you are looking for