LSMW Steps for VA31

Hi all,
I need LSMW steps to upload scheduling agreements.
Need to use BAPI - 'SD_SALESDOCUMENT_CREATE' to create the same .
If there is some link then please post i search on SDN also for scheduling agreements.
Any help useful .
Regards,

After finishing upload the customer using LSMW, you can see the customer number created at LOG button. then click DISPLAY.
otherwise.... you can check it from KNA1 table.

Similar Messages

  • I want a doc about LSMW steps for HR,PLZ help me!

    hi everyone:
    Can anyone pls send me a doc with LSMW steps regarding some HR function/project (as an example) for which I would be more than grateful.
    thanks!
    Message was edited by:
            Zsolt Markus

    Hi 4K!
    I hope you already know the rules of SDN -
    > no private mailing, knowledge sharing platforms are Forums, Blogs, Articles, etc...
    Please do not use your e-mail.
    I have deleted them from your question.
    Best regards,
    Zsolt

  • Please send detail steps for uploading legacy data

    Hi friends,
    please send detail steps for uploading legacy data
    Thanking u in advance,
    Diwa.

    HI U CAN USE LSMW TO UPLOAD LEGACY DATA
    LSMW is used for migrating data from a legacy system to SAP system, or from one SAP system to another.
    Apart from standard batch/direct input and recordings, BAPI and IDocs are available as additional import methods for processing the legacy data.
    The LSMW comprises the following main steps:
    Read data (legacy data in spreadsheet tables and/or sequential files).
    Convert data (from the source into the target format).
    Import data (to the database used by the R/3 application.
    But, before these steps, you need to perform following steps :
    Define source structure : structure of data in the source file.
    Define target structure : structure of SAP that receives data.
    Field mapping: Mapping between the source and target structure with conversions, if any.
    Specify file: location of the source file
    Of all the methods used for data migration like BDC, LSMW , Call Transaction which one is used most of the time?
    How is the decision made which method should be followed? What is the procedure followed for this analysis?
    All the 3 methods are used to migrate data. Selection of these methods depends on the scenario, amount of data need to transfer. LSMW is a ready  tool provided by SAP and you have to follow some 17 steps to migrate master data. While in BDCs Session method is the better choice because of some advantages over call transaction. But call transaction is also very useful to do immediate updation of small amout of data. (In call transaction developer has to handle errors).
    SO Bottom line is make choice of these methods based of real time requirements.
    These methods are chosen completely based on situation you are in. Direct input method is not available for all scenario, else, they are the simplest ones. In batch input method ,you need to do recording for the transaction concerned. Similarly, IDoc, and BAPI are there, and use of these need to be decided based on the requirement.
    Try to go through the some material on these four methods, and implement them.  You will then have a fair idea about when to use which.
    LSMW Steps For Data Migration
    How to develop a lsmw for data migration for va01 or xk01 transaction?
    You can create lsmw for data migration as follows (using session method):
    Example for xk01 (create vendor)
    Initially there will be 20 steps but after processing 1 step it will reduced to 14 for session method.
    1. TCode : LSMW.
    2. Enter Project name, sub project name and object name.
        Execute.
    3. Maintain object attributes.
        Execute
        select Batch Input recording
        goto->Recording overview
        create
        recording name.
        enter transaction code.
        start recording
        do recording as per ur choice.
        save + back.
        enter recording name in lsmw screen.
        save + back
    Now there will be 14 steps.
    2. MAINTAIN SOURCE STRUCTURES.
        Here you have  to enter the name of internal table.
        display change
        create
        save + back
    3. MAINTAIN SOURCE FIELDS.
        display change
        select structure
        source_fields->copy fields.
        a dialogue window will come .
        select -> from data file
        apply source fields
        enter No. of fields
        length of fields
        attach file
        save + back
    4. MAINTAIN STRUCTURE RELATIONS
        display change
        save + back
    5. MAINTAN FIELD MAPPING & CONVERSION RULE
        display change
        click on source field, select exact field from structue and enter
        repeat these steps for all fields.
        save+back
    6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
        execute
        save + back
    7. SPECIFY FILES.
        display change
        click on legacy data
        attah flat file
        give description
        select tabulatore
        enter
        save + back
    8. ASSIGN FILE
        execute
        display  change
        save + back
    9. IMPORT DATA.
        execute
        display  change
        save + back
    10. DISPLAY IMPORTED DATA
          enter ok, it willl show records only.
          back
    11. CONVERT DATA
          execute
          display  change
          save + back
    12. DISPLAY CONVERTED DATA
          execute
          display  change
          save + back
    13. CREATE BATCH INPUT SESSION
          tick keep batch input folder
          F8
          back
    14. RUN BATCH INPUT SESSION.
          sm35 will come
          Object name will be shown here
          select object & process

  • LSMW method for transaction IW31 (Service Order)

    Hi all,
    I am looking for a way to create multiple Service Orders using LSMW, but no Recording.
    Transaction would be IW31.
    Can you give some tips please?
    Thank you! Walter.

    Hi Brenda, thanks for the confirmation you found in the notes!
    Can you tell me how to use the BAPI for mass-upload / migration? I haven't done that before, but it looks to me that we won't use LMSW for that, but tr.code SE37, right?
    I found out that the BAPI you mention belongs to Business Object BUS2088A, wich cannot be selected in the first LSMW-step.
    So the idea is then to write an Abap-program which reads my input-file (which contains all the data to create the service-orders) and then call the BAPI several times to create the Service-Orders one by one. Am I right, or is there a standard way to use this BAPI for mass-upload?
    Thanx again, Walter.

  • LSMW Recording for SPRO

    I would like to upload a list of Material Groups using LSMW in SPRO T-Code.
    I've tried recording but it doesn't work. Can anyone please guide me?

    hi ,
    Check out the following steps
    For validity across plan versions
    Organizational Management > Basic settings > Maintaining Number Ranges> Set Up Number Assignment for All Plan Versions
    Table : V_T77S0SC ( T-code : SM30)
    maintain
    NUMRG COMP X
    Organizational Management > Basic settings > Maintaining Number Ranges> Maintain Number range
    Table : T77IV ( T-code : SM30)
    Create new entries with $$X , where $$ indicates the plan version and X is Object type like O is the org unit .
    after this Selecting the object (Org unit, Job, Position and task) click on number range button
    This will take u to the Screen saying number range for personnel planning.
    click on change Interval button
    maintain the no ranges with the range u want keeping the current number range
    0 while creating for the first time.
    Regards
    Saurabh Goel

  • LSMW step by step procedures

    Hello Gurus,
    Can anybody please provide the LSMW step by step procedures for
    1. Business Partners
    2. Material Master
    3. Vendor Master
    4. Inventory Balances
    5. Purchasing Info Records
    Thank you very much

    Hi
    http://www.sapgenie.com/saptech/lsmw.htm
    http://service.sap.com/lsmw
    http://www.sapbrain.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
    http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
    http://www.esnips.com/web/LSMW
    blog
    /people/hema.rao/blog/2006/09/14/lsmw--step-by-step

  • LSMW Steps

    hai friends,
                    How to create lsmw step by step full creation ( including Maintain Object Attributes  ,  
    Maintain Source Structures    
    Maintain Source Fields        
    Maintain Structure Relations  
    Maintain Field Mapping and Conv
    Maintain Fixed Values, Translat )
                         please send the follwing mail id [email protected]
    Regards,
    S.Siva

    Dear Siva kumar,
    SAP Data Migration with LSMW
    No ABAP effort are required for the SAP data migration.  However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
    The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
    More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
    The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
    So although it was designed for uploading of legacy data it is not restricted to this use.
    We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
    The SAP transaction code is  'LSMW' for SAP version 4.6x.
    For those with the older SAP version (4.7 and below), the data migration programs might not have been pre-loaded.
    You can download the LSMW at no cost from SAPNet under Services, SAP Methodology and Tools, category Tools.
    If you are an existing SAP customer with an OSS ID, you can access the SAP Service Marketplace to download the  LSWM for your Basis teams to install to your SAP system: http://service.sap.com/lsmw
    The LSM Workbench carries out the following tasks:
    Reads the transfer data from one or more files (for example, spreadsheets, sequential files etc.)
    Converts the data from the source format into the target format
    Note that with background processing, the input file must not be located in the presentation server. Access to presentation server files is only possible when you are working online. 
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh
    P.S. you can send me a mail at my mail id [email protected] for any specific details

  • Want to know lsmw step by step

    dear sap gurus
    i want to know the lsmw steps,  step by steps thanks in advance. rewards the approcaite answer with the full points, thanks in advance

    Hi Gopi,
    Check thess links which have step by step process for LSMW
    http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
    http://learningabap.wordpress.com/2007/03/28/step-by-step-guide-for-using-lsmw-to-update-customer-master-records/
    Check these links too which are very helpful.
    /people/hema.rao/blog/2006/09/14/lsmw--step-by-step
    http://www.sap-img.com/sap-data-migration.htm
    http://www.sapgenie.com/saptech/lsmw.htm
    http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
    Thanks,
    Vinay

  • Lsmw  step by step procedure using   batch input method

    hi,
    lsmw  step by step procedure using   batch input method

    Step-by-Step Guide for using BAPI in LSMW
    Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
    Introduction:
    This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
    Pre-requisites:
    It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
    Step-by-Step Procedure:
    Details of the BAPI used in this scenario:
    Business Object: BUS2012
    Method: CreateFromData
    Details of Message Type and Basic IDoc Type:
    Message Type: PORDCR
    Basic IDoc Type: PORDCR02
    Let’s have a look at the BAPI first, before proceeding to the LSMW:
    1. Go to Transaction BAPI
    2. Click on Search Button
    3. Enter the value “BUS2012” and select “Obj.type(Technical Object Name”
    4. Press ENTER
    5. Following screen appears:
    6. On the left side of the screen, Expand the “PurchaseOrder”.
    7. Select “PurchaseOrder” and double-click on the same for details.
    Building LSMW using BAPI:
    1. Go to Transaction LSMW.
    2. Enter the Project, Subproject and Object information and click on CREATE.
    3. Enter the descriptions for Project, Subproject and Object.
    4. Now select Settings à IDoc Inbound Processing
    5. “IDoc Inbound Processing” screen appears. Enter the required details as shown below:
    6. Click on “Activate IDoc Inbound Processing”.
    7. Click on “Yes” when prompted for “Activate IDoc Inbound?”
    8. Hit on “Back” to return to the main screen.
    9. Click on Continue (F8). Following Screen appears:
    10. Select the Step 1 “Maintain Object Attributes” and select “Execute”.
    11. Select the radio button “Business Object Method” and enter the following details:
    Business Object: BUS2012
    Method: CreateFromData
    Hit ENTER
    12. Save and click on BACK button. Following information message is displayed.
    13. Now select step 2 “Maintain Source Structures” and click “Execute”.
    14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
    Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on “Create” again to create the child structure. Following popup appears:
    Select “Lower Level” and click on Continue. Enter the Item data structure name.
    Click Save and hit BACK button to go to the main screen.
    15. Select step 3 “Maintain Source Fields” and hit execute.
    16. Enter the fields as shown below:
    17. Click SAVE and return to main screen.
    18. Select step 4 “Maintain Structure Relations” and click Execute.
    Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
    Select HEADERDATA and hit ENTER
    Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
    Click Save and return to main screen.
    19. Select the step “Maintain Field Mapping and Conversion Rules” and click on execute. Maintain the Field Mapping as seen below:
    20. Select step 7 “Maintain Source Files” and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
    Save and return to main screen.
    21. Select the step “Assign Files” and click on Execute.
    Assign the file provided to the source structure. Here the same file is provided for both the structures.
    Save and return to the main screen.
    22. Select the step “Read Data” and click on Execute.
    Click on Execute.
    Return to the main screen.
    23. Select the step “Display read data” and click on execute.
    Click on the structure name to get the field level values.
    24. Return to main screen and now select “Convert Data”.
    25. Return to the main screen and select “Display Converted data”.
    26. Return to main screen and select “Start IDoc generation”.
    27. Now select the step “Start IDoc Processing” on the main screen.
    28. Return to main screen and click on “Create IDoc overview”. Here the data record and status records of the IDoc could be viewed
    It is given in screen shot.
    http://www.****************
    http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
    http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
    http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
    http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
    http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
    http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
    http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
    Reward points if useful.

  • Ipod not recognized by itunes...next step for nike+

    when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
    ipod nano    

    I can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem

  • Step for Publish a development created with Webdynpro for Java

    Good Afternoon.
    I am new in this of publish development in the portal.
    We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
    The development work fine. But i don't know how to publish this in the portal.
    What configurations i have that do In the part of ECC and in the part of portal.?.
    Can someone help me?
    Kind Regards-

    Hi,
    When i have that do configurations for the following paths:
    Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
    Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
    Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
    Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
    Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
    Kind Regards,

  • Step by step for 2.6

    So I think im finally ready to make the plundge to the 2.6 kernel.
    So I need some help. Ive only compiled a kernel a few times, and I never changed many settings.
    So could someone give a step by step for it (being sure to list any arch-specific quirks)? I would greatly appreciate it.
    Also, I hear theres a patch that lets you run the Official Nvidia drivers with the 2.6 kerne, has anyone gone through this? I really have no idea how to go about doing this,as i've only ever installed the .run file.
    Any help would be appreciated.
    Also, its possible to switch between the 2.4 and 2.6 kernel, right? (obviously with a reboot).
    Lastly, Is a new release of the 2.6 due out anytime soon? I dont want to download and compile this just to find a new version comes out.

    You have to use module-init-tools which supercedes modutils.  I made a PKGBUILD for it for my local system simply so I could uninstall it easier if I wanted.  However, you still need the old modutils as well.
    Here is my hack to get module-init-tools working:
    1.  Use the PKGBUILD below to compile and install module-init-tools.
    2.  For each of modprobe, lsmod, rmmod, depmod, and modinfo from modutils, rename those to modprobe.old, lsmod.old, etc.  To find where these binaries are, use "pacman -Ql modutils".
    3.  Create symbolic links from the binaries that modutils used to provide to the new binaries that module-init-tools provides.  Again, use "pacman -Ql module-init-tools" to figure out where the new ones are.
    Example - modutils provides /sbin/lsmod.  Rename that to /sbin/lsmod.old.  module-init-tools provides /usr/bin/lsmod.  Create a symbolic link as follows:
    [root@limbo root]# ln -s /usr/bin/lsmod /sbin/lsmod
    If you aren't 100% sure what i am trying to say here, don't try any of it, or you will bork your system.  Also, this is more of a hack, and that's why I didn't upload the package to incoming.  I only made the PKGBUILD to keep track of where everything was going.
    Anyway... hope this helps you on your way to:
    [john@limbo john]$ uname -r
    2.6.0-test5
    [john@limbo john]$
    PKGBUILD
    pkgname=module-init-tools
    pkgver=0.9.13
    pkgdesc=""
    url="http://www.kernel.org/pub/linux/kernel/people/rusty/modules/"
    depends=()
    conflicts=()
    backup=()
    install=
    source=(http://www.kernel.org/pub/linux/kernel/people/rusty/modules/$pkgname-$pkgver.tar.gz)
    build() {
    cd $startdir/src/$pkgname-$pkgver
    ./configure
    make || return 1
    make prefix=$startdir/pkg/usr install

  • Steps for Email integration in sap crm system?

    Hi Experts,
    Please guide me the steps for email integration so that the emails are in syn with the WEB UI Interaction centre.Settings at the backend GUI are already defined.Actually in my case the Development system is not integrated with Email sync in WEB UI.I need to test the email functionality in Development system as steps I have followed are as below:
    1)TCode :- SBWP,then I have created a mail & send it to email address which is defined in the SO28
    2)TCode :- SOST,there I have clicked on my test mail,select it & click on execute button,green light appears & shows the message that the email is successfully forwarded.
    Now when I open Web Ui,select my business role & then I go to inbox in the Navigation Bar,select email & click on search.Then it does not appear anything & shows search result zero.
    Kindly suggest me the steps so that I can see my test email in Dev system Web Ui business role .
    Thanks
    Warm Regards
    Vineet Joshi

    Hi Prashant,
    Thanks for your response. I want steps to configure communication channels like e-mail & fax to facilitate receipt of invoice from vendors, sending of PO to vendors, cheques, payment advices to name a few. Please let me know the detailed configuration steps for the same and also do we need to instal any tool to facilitate this process.
    Thanks
    Best regards,
    Bhaskar
    Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM
    Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM

  • HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

    When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct?  Where do you look, or what do you do, that indicates the playlists are in alphabetical order?  Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
    If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe. 
    The 3rd gen shuffle uses VoiceOver.  If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details).  When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
    There are more details in the manual for the 3rd gen shuffle, which is online here
    http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    See page 22 for the section about setting up and using VoiceOver.  The part about switching playlists starts on page 23 (Using the Playlist Menu).

Maybe you are looking for