LSNRCTL and SRVCTL listener management

Hi
I am struggling with understanding how to manage my listener in a RAC 11gR2 environment. I had thought that I shoudl be using LSNRCTL to start and stop the listener, and indeed when I use this and list STATUS I can see all the services correctly registered. However when I came to view ASM it said there was a listener problem.
To fix that I had to start the listener using SRVCTL. I now notice there are no services registered with my listenere when I run LSNRCTL STATUS, but when running SRVCTL STATUS it says the listener is enabled and running on both my nodes.
Do I have a problem? I am a little confused on best practice here.
Many thanks

Hi,
General rule:
On a RAC cluster all database resources ( cluster parts ) are managed by the SRVCTL command
The listener usually is created/started as the owner of the ASM software, because at installation time it has to run at the moment the ASM instance is created.
Can you post the contents of the listener.ora file used. On our RAC we use default listener name "LISTENER" and even when I use the 'lsnrctl status' command it shows the correct status.
Please post some more info (listner.ora, crs_stat -t, screen output of 'ps -ef| grep tns', output of 'lsnrctl status')
Thanks
FJFranken

Similar Messages

  • MDB and Database - Listener port stops working

    Hi,
    I have created an MDB which does the following when a message is received from the queue.
    1. Store message in database
    2. do some processing
    At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?

    usmanchaudhry wrote:
    Hi,
    I have created an MDB which does the following when a message is received from the queue.
    1. Store message in database
    2. do some processing
    At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?i believe you need an XA driver and a transaction manager, for starters.
    a simple JDBC rollback won't do it.
    which app server are you using?
    which jms provider?
    %

  • How to failover SCAN VIP and SCAN Listener from one node to another?

    Environment:
    O.S :          HP-UX  B.11.31 U ia64
    RDBMS:   Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    It is a 2 Node RAC.
    Question:
    How to failover the SCAN VIP and SCAN LISTENER running on node 1 to node 2?
    What is the relation between standard LISTENER and SCAN LISTENER ?
    Why do we need LISTENER, when we have SCAN LISTENER ?
    When I tried with SRCVTL STOP LISTENER , I thought the SCAN LISTENER adn SCAN IP will failover, but it did not?
    Also please clarify if I use SRVCTL RELOCATE SCAN -i 1 -n Node1
    Actalluy I am trying that by moving the SCAN listeners so that when I do PSU 7 patching on 1 node, no incoming attempt to connect will spawn
    a process and thereby opening files in $ORACLE_HOME (which would prevent the patch from occurring)
    Please clarify my queries.
    Thanks,  Sivaprasad.S

    Hi Sivaprasad,
    1. The following link will help you for SCAN VIP and SCAN LISTENER failover from 1 node to another.
    http://heliosguneserol.wordpress.com/2012/10/19/how-to-relocate-scan_listener-from-one-node-to-another-node-on-rac-system/
    http://oracledbabay.blogspot.co.uk/2013/05/steps-to-change-scan-ip-address-in.html
    2. The Standard LISTENER is specific for particular node for which it is running. It cannot be relocated as its specific for the node its running. SCAN listeners are not replacements for the node listeners.A new set of cluster processes called scan listeners will run on three nodes in a cluster (or all nodes if there are less than 3).  If you have more than three nodes, regardless of the number of nodes you have, there will be at most three scan listeners. So no relation for standard LISTENER and SCAN LISTENER.
    3. Hmmm. let me put it in easy way for this question. All the RAC services like, asm, db , services, nodeapps registers with this SCAN_LISTENER. So if any of these services (asm, db , services, nodeapps) got down/not running, the SCAN_LISTENER will know the down status, and if any client requests to access the node/service which is down, the SCAN_LISTENER will redirect the client request to the least loaded node. So here all these process will happen without the knowledge of client. And As usual the standard LISTENER looks only for incoming request to connect with the database. So we need both LISTENER and SCAN LISTENER.
    4. If you provide SRCVTL STOP LISTENER,  it stops the default listener on the specified node_name, or the listeners represented in a given list of listener names, that are registered with Oracle Clusterware on the given node. No failover will happen under this case.
    5. Yes you can relocate if you want to relocate the scan.
    Hope this helps!!
    Regards,
    Pradeep. V

  • Start of 10g databases and the listener when the Unix is rebooted ....

    Hello,
    I have to manage 10g databases in Sun Solaris 10.
    I would like to know how to make automatic the start of 10g databases and the listener when the Unix system is rebooted.
    Thank you

    In my blog, I have Automatically Startup and Shutdown Oracle on Linux
    http://kamranagayev.wordpress.com/2008/12/22/automatically-startup-and-shutdown-database-in-linux-os/
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com

  • I purchased a song on my Ipod Touch 4 GEN. and i listened to it not 5 mins before i synced it with Itunes...then i looked in my Ipod music library and itunes library...GONE. but when i go to download, it wanted me to pay even tho i have bot it! HELP!!!

    i purchased a song on my Ipod Touch 4 GEN. and i listened to it not 5 mins before i synced it with Itunes...then i looked in my Ipod music library and itunes library...GONE. but when i go to download it, like with Apps when if you have purchased an app and it get's deleted...you can have it back for FREE
    and i tryed that with this song...and it says that " you have already purchased this song, would you like to buy it again?" but it wont let me get it again for free even tho i have bought it before...is there a way i can get it back with out having to pay??
    HHHHHEEEELLLLPPPP!!!! PPPLLLEEEAAASSSEEE!!!!!!

    You buy one and only one download.
    As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
    http://www.apple.com/support/itunes

  • Items greyed out after upgrading and migrating to Sharepoint 2013 - Open and Check Out + Manage Document Option

    Hi there,
    Following a migration to SharePoint 2013, the follow options have been disabled (Open and Check out + Manage) (see below). These are critically important functions and make it very hard to make SharePoint a useable interface. Any guidance on how to resolve
    these issues is greatly appreciated. This is not a branded website, and there has been no changes made to the standard interface.
    Kind regards
    Jarrad Koppen

    I'm not sure what the easiest way is either.  First, I would try to create a new site collection with a new library and see if you get the same behavior.  If not, then its something in the upgrade process.  If it does that also would point
    to something being wrong in the way that javascript is being executed.
    If it is happening everywhere I suspect you'll have to start tracing javascript using something like IE developer's toolbar to see why the status on those buttons isn't changing when you select a document.  I'm not sure what else to suggest.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

    Hi.
    Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
    for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
    + Import-Module <<<<  (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
    If first loaded DPM 2012 module::
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
    types. Retrieve the LoaderExceptions property for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
    an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
    +         Import-Module <<<<  'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
    ualmachinemanager\virtualmachinemanager.psd1';
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

    Vote if you have same problem:
    https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

  • I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    Hi czigrand,
    Thanks for visiting Apple Support Communities.
    Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
    In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
    iTunes: Sending iTunes Gifts
    http://support.apple.com/kb/HT2736
    Best Regards,
    Jeremy

  • Photos says iphoto library cannot be repaired--yet it loads fine in iphoto and iphoto library manager

    photos cant load my iphoto library. It says there are errrors and that iphoto library cannot be repaired--yet it loads fine in iphoto and iphoto library manager. Any help would be appreciated

    pneb wrote:
    photos cant load my iphoto library. It says there are errrors and that iphoto library cannot be repaired--yet it loads fine in iphoto and iphoto library manager. Any help would be appreciated
    You probably have to run one or all of the IPHOTO resets/repairs over your library.   Its in IPHOTO help which keys you have to hold down while opening IPHOTO.
    Sorry don't remember which keys.
    these sites may be of interest to you
    photo getting started
    https://support.apple.com/en-us/HT204655
    https://support.apple.com/en-us/HT204410
    https://support.apple.com/en-us/HT204264
    https://support.apple.com/en-us/HT204414

  • My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

    my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

    If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

  • I need to download my Verizon bill. For some reason my account says I'm a "Member" and not the "Manager" or "Owner" so I can't download the bill. I AM THE ONLY PERSON ON THIS ACCOUNT. I AM THE ONLY PERSON WHO HAS EVER BEEN ON THIS ACCOUNT. ONLY ME. JUST M

    I need to download my Verizon bill. For some reason my account says I'm a "Member" and not the "Manager" or "Owner" so I can't download the bill. I AM THE ONLY PERSON ON THIS ACCOUNT. I AM THE ONLY PERSON WHO HAS EVER BEEN ON THIS ACCOUNT. ONLY ME. JUST ME.

    Prepaid accounts don't have Account Owners/Managers, they just have Account Members (and prepaid accounts have less options regarding changes via their My Verizon account as a result).

  • HT4847 How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!

    How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!

    Thanks very much!
    Although I had to add everything again to the playlist, at least I can just copy it over in future!

  • New Note 790189.1 - Oracle Clusterware and Application Failover Management

    Hi all,
    please, note the newly created Metalink Note 790189.1 - Oracle Clusterware and Application Failover Management if you want to use Oracle Clusterware as a general purpose cluster solution. The note intends to clarify and to explain the current situation in regards to the supportability of applications managed by Oracle Clusterware.
    In environments not including Oracle RAC, Oracle Clusterware still provides the level of high availability that is commonly known to be achievable for applications and databases managed in (failover) cluster environments. These environments can include Oracle Single Instance Databases, Oracle Application Servers, Oracle Enterprise Manager components, third party databases, or any other kind of application. (For more information on Oracle Clusterware 11g in general, please, refer to [Oracle Clusterware homepage|http://otn.oracle.com/clusterware].)
    Metalink Note 790189.1 - Oracle Clusterware and Application Failover Management is tightly integrated with the information on application failover management available on the [Oracle Clusterware homepage|http://otn.oracle.com/clusterware] and discusses typical questions like
    * Terminology
    * Script supportability and preconfigured agents
    * How to prove that action scripts work outside of Oracle Clusterware
    * Supportability of the Oracle Database Single Instance example scripts
    * How do I know whether a certain script is supported as a preconfigured agent?
    Metalink Note 790189.1, however, does not change the level of support that has been introduced for these kind of configurations as of Oracle Database 10g Release 2: "Generally, Oracle does not support action scripts in the strict terms of supporting individual code fragments. Oracle fully supports the integration of individual action scripts proven to run outside of Oracle Clusterware into the Oracle Clusterware management stack. Supported operations therefore typically involve crs_* commands such as crs_profile, crs_register, crs_setperm, crs_getperm, crs_start, crs_stop, and crs_relocate invoked on custom resources. If actions scripts are used as part of a preconfigured agent, Oracle or the application provider who provides the agent will support the integration of this agent, while only the application provider will provide support for the individual action scripts."
    Just for your information. Thanks,
    Markus

    not meant to be a question - rather an announcement.

  • TS1424 Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url"  After this occured a few times I reset the id password, and this was confirmed by email.  It still fails with same message.  I

    Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url"  After this occured a few times I reset the id password, and this was confirmed by email.  It still fails with same message.  Ideas?

    Hi, you have to logout from your iTunes account and reconnect it:
    Settings / iTunes & App Stores / ...
    https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
    Hope this helps... :-)

  • Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.

    Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.  I want to start over and I can't even get back in to do this bc it won't take any of my passwords.  How can I start over completely?

    You got a new laptop? try asking there or in Lion forum.
    If it has Lion, use the Recovery Mode boot Command-R
    Use that to erase and reinstall - it has network install ability.
    Want MacBook Pro forum or Lion Community?
    MacBook Pro
    Lion Mac OS X Communities
    New, as in from Apple, it would have asked for full setup.
    Want to reset the password? (it is used then I'd wipe it clean and start over)
    How to run the Password Reset utility in OS X 10.7 Lion

Maybe you are looking for

  • Number range creation for new service order type

    Hi, Could anyone please tell me how can we create service order number range if we have done a new service order type creation, and what should we do: should we create the number range in development and then transport it to the production or we shou

  • Unable to Load Bank Statement in ECC 6.0

    Hi Guru's, When using FF_5, Unable to load bank statement for 2007/09/13.  Error message Statement 00324 already exists; entry ignored  (Message no FB771) (Ticket 855) 2 previous statements were loaded out of sequence, so number 00324 is used up alre

  • I used window cleaner a few times on my iPhone what happens?

    I recently got an iPhone 6 for my birthday. It got dirty a few times so I used window cleaner on the front of the iPhone because it said anti-streak and anti-fog. I thought that this would prevent it from fogging up (which it has) but recently I was

  • Network Name Resource Availability - failover cluster error 1196 on Hyper-V 2012 R2 nodes

    Hello, We're getting this error in our even logs of our four node failover cluster, we tried deleting Host A record in DNS management, that did nothing. Failover cluster event: 1196 "Cluster network name resource 'CAUCrgt8' failed registration of one

  • PB G4 ram in MacBook Pro?

    Anyone know if the ram from a Powerbook G4 (333 MHz DDR2 SDRAM PC2-4200) will work in a MacBook Pro (667MHz DDR2 SDRAM PC2-5300), I am thinking of buying a MacBook Pro, and my old PB has an extra 1 gig ram stick in it, seems a shame to have to waste