LV driver for THERMONICS T-2500 Temperatur​e Forcing System

Hi
I'm looking for a LabVIEW (GPIB)-driver - couldn't find
anything until now. In the past I have written similar stuff for TEMPTRONIC's TPO 4200 - but now we got "different" equipment. I saw that there was the same question two years ago.....- but no solution.
Thank you
Werner

Hello,
Taking a look at the thermonics web site, there is a library found here that looks like an instrument driver for you device.
This instrument driver is not available in ni.com/idnet, and has not been certified by National Instruments. However, as it comes directly from the manufacturer they may be able to provide support for the driver if it is necessary.
Scott Y
NI

Similar Messages

  • Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive

    Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
    Name : Seagate Backup+ BL Media
              Type :           Disk
              Partition Map Scheme :           Master Boot Record
              Disk Identifier :           disk1
              Media Name :           Seagate Backup+ BL Media
              Media Type :           Generic
              Connection Bus :           USB
              USB Serial Number :           NA5B83S2
              Device Tree :           IODeviceTree:/PCI0@0/XHC1@14
              Writable :           Yes
              Ejectable :           Yes
              Location :           External
              Total Capacity :           1 TB (10,00,20,48,85,504 Bytes)
              Disk Number :           1
              Partition Number :           0
              S.M.A.R.T. Status :           Not Supported

    Seagate website.
    Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive.

  • I need an instrument driver for Neocera LTC-21 Temperature Controller and am having problems sending the IDN? string to the same instrument.

    Hi,
    When I use the instrument wizard in LabVIEW 5.0, to indentify a device (Neocera LTC-21 Temperature Controller), I receieve the following error:
    Error.
    There was an error sending this string.
    VISA error code returned was:
    -1073807339
    Error -1073807339 occured at VISA Read.
    Possible reasons:
    VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
    Although, the manual for this instrument states that the response should be a string of characters in the form of "Neocera Model LTC-21 version".
    Also, I do not have a driver for this instrument, inspite of checking on the NI Instrument
    Divers Network and the company website(www.Neocera.com).
    I would truely appreciate if someone can help me.
    Thanks,
    Kunal.

    I could not find any drivers for that instrument. You may just have to make your own. As for getting the device to respond, there are a couple of things you can do. If you are using GPIB: First, you might want to just reset the device by turning it on and off. If there are other instruments on the same bus, make sure 2/3 of them have their power on. Try communicating with it through IBIC. Here is a page that will help.
    http://www.ni.com/support/gpib/max/ibic.htm
    IBIC communicates with the GPIB on a very base driver level and you set everything manually step by step, so you can see where the break down is. Also make sure you are entering the "*IDN?" and all other commands correctly. Check the device manual to see what commands it should respond to and if there ar
    e any special settings you might need. If you are doing serial communication, you may want to check to see if you need a null modem cable for it to function. There also may be a dip switch on the device that switches between serial and GPIB communication.

  • Scanner driver for Konica Minolta 1690MF since new operating system Maverick

    Scanner driver for Konica Minolta 1690MF will not work since new operating system Maverick.
    Update driver came from konica minolta - not through an Apple software update.
    Konica M 1690MF will print as normal but 'image capture' is empty.

    Same problem. I emailed KM support. Was told new drivers were being considered. Not sure what that means. No date given. Have tried several 3rd party drivers, but none work. Would love for someone to post a solution.

  • I need an Internet driver for Yoga 13 with Windows 7 operating system

    I downgrade my yoga 13 operating system from Windows 8 to Windows 7 because it has a confliction with my software that I need to use. After that, I cannot connect it to Internet. Does anyone know the driver that I can use for this circumstance please? I also have some unknow devices listed on the Device Manager such as SM Bus Controller, PCI Data Acquisition and Signal Proceussing Controller, USB Controller, etc.

    Hello,
    From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset. 
    I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers.  Perhaps Device Manager will find the correct drivers to install that way.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Anybody has thermonics T-2500's instrument driver?

    Has anybody developed the instrument driver (GPIB)
    for Thermonics T-2500?

    Hi,
    Unfortunately, I was unable to locate a driver for your instrument at either thermonics website or at www.ni.com/idnet. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://www.ni.com/devzone/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the
    vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
    http://www.ni.com/alliance
    An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
    There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
    Some useful resources for your application are
    ni.com > NI Developer Zone >
    Development Library > Instrument Connectivity
    http://search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
    Hope this helps!
    Aaron K.
    Application Engineer
    National Instruments

  • Win 8.1 x32 gfx driver for Intel Celeron embedded gpu

    Hello, i upgraded my Lenovo Flex 10  from windows 8 to windows 8.1 and there are drivers for everything except Display driver for embedded Intel Celeron GPU. What a shame?
    I tried to contact Intel, but their website says i should ask my solution manufacturer.
    My CPU is Celeron N2810 and there is only driver for x64, but it was x32 operating system installedon my Flex 10 and now i can not downgrade and there is no display driver, except Mycrosoft's default one (Metro Interface is laggy). 

    Hi,
    According to the results of these two dump file, they had same reason of BSOD, both they were running google update when BSOD occurs, maybe you can try to remove Chrome on your system for test.
    Roger Lu
    TechNet Community Support
    Chrome is not the problem, its very widely used so if there was a problem it would get fixed eventually
    its only a browser, the problem is a device. BSOD happens at the kernel level where the device drivers are loaded
    Place your rig specifics into your signature like I have, makes it 100x easier!
    Hardcore Games Legendary is the Only Way to Play!

  • For Curt Y......I'm using a internal hard drive for scratch

    I've set my extra, internal hard drive for scratch....not using system drive.

    Dreamit, please continue the dicussion in your original topic: http://forums.adobe.com/message/4557660#4557660

  • Unable to find driver for realtek sound card

    hi iam having HP Pavilion Media Center a1320in Desktop PC.. iam unable to install driver for my sound card.i got driver from hp website but while installing a msg gets popup. it says install Microsoft uaa bus driver for hd audio. even in device manager-system devices i cant find MS UAA hd audio. 1 unknown device its shows in device manager. bcoz of that i purshased a new sound card. help me pls.... os - windows xp pro sp3.

    hi paul . i just installed the above two softs. but nothing happend. kb888111 is for xp sp2. so it will not get installed in sp3. bt i made small changes in registry and installed it. even i installed 2nd soft realted audio also, u can find my comp specification over here http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00590356&tmp_task=prodinfoCategory&lc=en&dlc=en​...〈=en&product=1823355 iam using xp sp3. in my device manager-system devices- i cant find microsoft UAA....... and i think thats the problem. every time i install driver for realtek audio(got from hp website), it ask me to install MS UAA bus driver. what to do now..

  • Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

    Greetings to all!
    Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
    Would be glad to realize how to solve this... Thanks a lot.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.
    Message was edited by: Airtoground

    I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
    Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
    Contents and Installation order
    for Windows VISTA
    Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
    - SLP Module OEMSLP2.0
    - Sun Java 2 Runtime Environment v1.6.0
    1 KB928190(For updated USBHub.sys) KB928190
    2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
    3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
    4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
    *5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
    I found this driver but it says "no suitable driver found, installation wizard stops its work".
    Any ideas what could it mean?
    Thanks to all.

  • Need sata f6 driver for neo 4 ultra (winxp 64)

    or do u even need a f6 driver for windows 64?
    yes i have a sata drive.

    if you unrar the 64 bit drivers in a folder you get a folder ide
    inside are 2 more folders
    one says xp one windows 2000
    best i can see you need to copy every thing in the xp folder to the floppy
    except the raid utility folder
    these are what it tells you to copy for 32 bit
    Driver for Win2000/XP
      Please copy CDROM:
      nVidia\System\CK804\IDE\WIN2K or WINXP
                                   disk1         file
                                   idecoi.dll    file
                                   nvata.cat     file
                                   nvatabus.inf  file
                                   NvAtaBus.sys  file
                                   nvcoi.dll     file
                                   nvide.nvu     file
                                     nvraid.cat    file
                                   nvraid.inf    file
                                     nvraid.sys    file
                                   nvraidco.dll  file
                                   nvuide.exe    file
                                   txtsetup.oem  file
    so thats every thing bar the raid utility as i said

  • I have a compaq 6200 pro i can not find the driver for SM bus controller.

    I down graded the 6200 pro with the i3 chip  to winXP and now I can not find the driver for the SM bus controller does this system have a sm bus controller?

    Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

  • Driver for HP psc 2510 and OSX 10.4.10?

    Apple sent an upgrade for my OS 10.4, recommending download, so I did. Subsequently, when I tried to print something from e-mail, a message appeared to the effect that the computer could not recognize the driver. My 2510 HP all in one came up on an add printer box, but command was rejected for driver issue.
    After trying everything else, generally cleaned up corrupted files, got everything else humming, and called HP tech support. Seems that my wonderful all in one printer is obsolete and the company has practically disowned it--no updates, parts, advice for this item. When Apple updated the OS 10.4.10, there was no longer interface with HP PSC2510.

    Welcome to the discussions forum MrMom.
    I think your Mac ought to be running OS X 10.4.11, so check Software Update again. If you're not successful, try this link: http://support.apple.com/kb/TA24901 and select the *Combo Update* for your iMac (PPC or Intel, as appropriate).
    HP's software for the PSC 2510 is located here: Select software and drivers.
    Click on the link "Software for HP PSC 2500 Series - Mac OS X v10.3 and v10.4 (Universal)". I believe that's what you'll need.
    According to HP and my own personal experience, the print drivers for this printer are already built into OS X. You only need the above software to use the scanner and fax features. I have a reference to that effect at home but I'm not there right now, so if you don't meet with success let me know and I'll research this further.
    Seems that my wonderful all in one printer is obsolete and the company has practically disowned it--no updates, parts, advice for this item.
    HP is not the company it used to be. Their interest in, and support for OS X is extremely limited. As such HP has tied themselves to a dying market. I no longer recommend them.

  • Win 7 (64 bit) Driver for my Color LaserJet 2550n Printer

    A specific driver for my HP Color LaserJet 2550n is not listed in the Win 7 driver list. I see drivers for 2500 PCL 5, 2500 PS, 2550 PS, and 2600n. ( just updated the Windows driver list.) I've been using the HP Color LaserJet 2550 PS driver, but have problems printing that I never had with Win XP. Which ddriver is the correct one for my 2550n printer?. Thanks.

    Hi,
    Please get it directly from the following link:
      http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to develop 64-bit Windows device driver for NI-6602?

    Due to the fact that NI-VISA doesn’t support 64 bit Windows, how can I do to develop a 64 bit Windows device driver for NI 6602 (Counter/timer) PCI card. The possible jobs include:
    Develop a Windows Kernel Mode Driver (“Device Driver”);
    Make it to comply with VISA in order to utilize “osiBus Generic IO Interface” and MH DDK.
    Could anyone please give me some advices as soon as possible?
    William Liao
    Message Edited by Wiliao on 07-22-2005 04:12 PM

    Hi All,
    I am currently working on getting the health parameters
    from the motherboard like voltage fan and temperature. I have already
    already done this using 32 bit winio driver but i am not able to work
    on 64 bit version. is there any driver availbale in 64 bit for
    obtaining this parametes or some one help me to get a 64 bit winio
    driver.
    Regards,
    Senthil prabu R

Maybe you are looking for

  • How to get open filename in Reader

    Hello, I am looking for a way to get the filename of the open document in Acrobat Reader window from a C# application I am working on. I can't find a way to do it... I am so desperate I am thinking on create a plug in or something for Acrobat Reader

  • 8ijvm in 9ias or 8.1.7 db

    Hi , I'm looking the new structure about ias and mod_8i. My Questions is : 1) Where is the better jvm to run servlets or ejb (8ijvm on ias or in db ?? 2) run servlet into jserv and ejb in oracle ? thanks Carlo null

  • Urgent - general question - cursor related, maybe?

    Background: I have a hierarchy of tables say A,B,C, each having a one to many relationship (A 1..n B 1..n C). I want to set one of the columns of A to a value of the primary key of one of the rows of B or C. The logic that I need to set the value in

  • CHA Vendor Updation..

    Hi all , We are having the import PO which is having more than 150-200 Line items,, We need to maintain same vendor code for  all the excise related condition type ( Basic Excise duty , CVD , CESS etc) So everytime we need to go each & every line ite

  • Widget browser discontinued?

    So now Adobe has discontinued the Widget Browser? So you can't even browse the exchange anymore unless you "upgrade" to DWCC? What a blatant ripp-off. I have truly had it with the direction they're taking Dw development...