Mac CF8 will not start with Java 1.6

I was reading a bit yesterday on problems with calling web
services on CF8 Mac using Java 1.5.x (in short, you can't use web
services). The proposed solution was to upgrade to Java 6/1.6 and
make that the default JDK on Mac OS X Leopard (10.5.4). I have Java
1.6 installed but when I make it the default JDK (I can verify this
is the correct JDK in Terminal), CF8 (8.0.1) will not start (from a
Terminal command or the CF Launcher). It says it cannot initialize
the JVM.
I understand that Java 1.6 will dramatically slow down CF8 on
a Mac but I do need to get web services going for local development
on an application. I'm thinking my 1.6 install is not good but
before going through the headaches to uninstall and install it
again, I wanted to check if anyone else has this issue and, if so,
how they got around it.
Thanks!!

I am experiencing the same issue. About 500 users are using Analyzer 7.0. When Java 1.6 is installed on their machine, the loading screen hangs, and never shows the login screen.

Similar Messages

Help, my Mac mini will not start up, only keeps thinking on first page( white screen with apple emblem)

Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section

Are you sure about your hard disk health, any clicking noice recently?
Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed.

My Desktop Mac Duo will not start up.

My Desktop Mac Duo will not start up. I keep getting a grey screen with the 'no entry' symbol. It can't find the srtat up disk. I cannot get it to start from the original system software CD either.

Disconnect all wired peripherals except keyboard, mouse, and monitor, whichever is applicable. Remove any aftermarket expansion cards. Check the installation DVD for dirt or scratches. Run a cleaning disc through the optical drive. Try again to boot from the DVD. If you can't, you have a hardware fault.

Mac iCal will not sync with Yahoo Mail

Mac iCal will not sync with Yahoo Mail.
The URL https://caldav.calendar.yahoo.com/principals/users/[email protected]///caldav.calendar.yahoo.com/principals/users/[email protected]/ encountered HTTP error 404. Make sure the URL is correct.

"Unable to login to the .Mac synchronization server
.Mac login failed"
This message appears on each of two computers when attempting to reset my data on .Mac.
Is there any solution?

HT1883 I am trying to run a hardware test. The Computer will not start with the "D" key held?

I am trying to run a hardware test. The Computer will not start with the "D" key held?

If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510

A 305- S6825 will not start with the battery and charger. There's no light, no noise on fan or HDD

PC will not start with the battery and charger. There's no light, no noise on fan, hard drive and CD writer. The hard drive, fan and charger are new. But I was havingproblems and sudden blackouts System 32. Try several times to install theoperating system but the pc turned off suddenly and restarted until I stop working completely. Now it does nothing and no light. I hope it can help me I need torespect and love very much this notebook.
Thanks in advance
Jose Echevarria
[email protected]

Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections. If it still won't start, remove the battery and start with just the AC power. Next try without the AC power and just the battery.
- Peter

HT1338 White Mac book will not start up just shows gray screen with apple logo

White Mac book will not boot up gray screen only

There are some recovery steps for this condition outlined in the below article.
Mac OS X: Gray screen appears during startup

Tomcat service will not start with JRockit 8.0

We are trying to use JRockit with Tomcat 4.0.1. It runs great as a console app
but when we try to run it as a service it will not start. Has anyone had any luck
with this.

Hi Bob!
You can use the jk_nt_service descibed and downloadble at
http://members.ozemail.com.au/~lampante/howto/tomcat/iisnt/
To make this work on JRockit you have to follow these instrcutions.
But also do this:
Make sure that you environment variables are set up correctly. Make sure
that
you have set your JAVA_HOME environment variable correctly, and that that
"%JAVA_HOME%\bin" is available in your PATH environment variable before any
other directory where any version of java.exe may exist. When running
applications as Windows services it is crucial that you set these
environment
variables system wide. To do this open
Start->Settings->Control Panel->System
and select the Advanced tab. Click on the "Environment Variables." button.
To
set system wide environment variables you must edit in the lower part of
this
dialog, i.e. the part called System variables.
When using jk_nt_service the Tomcat startup is defined in
%CATALINA_HOME%\conf\jk\wrapper.properties
Make sure that you set the three properties wrapper.tomcat_home,
wrapper.java_home and wrapper.cmd_line are set accordingly.
wrapper.tomcat_home must be set with the installation directory of tomcat
wrapper.java_home must be set to the same value as the JAVA_HOME environment
variable.
The property wrapper.cmd_line defines the startup command.
At the time of writing, this property should be set to
wrapper.cmd_line=$(wrapper.javabin) -Xnohup
-Djava.security.policy=="$(wrapper.tomcat_policy)"
-Dtomcat.home="$(wrapper.tomcat_home)" -classpath $(wrapper.class_path)
$(wrapper.startup_class) -config $(wrapper.server_xml) start
for JRockit. Normally this command includes a non-standard option to stop
the
JVM from shutting down the process when a user logs off. For JRockit this
non-standard option is -Xnohup, for the Sun JVM it is -Xrs.
/ Sten
"Bob Siragusa" <[email protected]> wrote in message
news:[email protected]...
Thanks for your reply Sten.
We slightly modified tomcat.exe to install our app as a service.
Really the only changes we made were to the name of the service and weadded a
few application parameters with -D. We still use the same startup andshutdown
hooks to the Bootstrap jar. This is where we think there may be a
problem.
>>
I am now trying to use SilverEgg Technologies open source Java ServiceWrapper
but have not progressed very far yet.
Bob
"Sten Garmark" <[email protected]> wrote:
Hi Bob!
Are we talking Tomcat controlled by a Windows Service? If so, how are
you
trying to make this happen?
Can you please point me to the documentation of this and the win32
wrapper
service that you are using?
I would like to be able to re-produce your problem.
/ Sten
"Bob Siragusa" <[email protected]> wrote in message
news:[email protected]...
We are trying to use JRockit with Tomcat 4.0.1. It runs great as aconsole
app
but when we try to run it as a service it will not start. Has anyonehad
any luck
with this.

Mac pro will not start keeps getting password window

My mac pro will not startup keep getting startup login window

I keep getting the login window and user ID each time I put in the correct password it starts and immediately return to the login window.
I have rebooted with the installation DVD and still getting the same responses. Please help. Do I need to take it apple. My MacPro is only five months old.

External startup disks will not start with my new iMac

My external devices which are startup disks will not start when connected to my iMac, although it appears in the bootable drive selections after the chime sound, using the option (Alt) key. I get the bootable drive selections and when selecting it all I get is a gray screen with the apple logo and that is it. No matter how long I wait the start up does not happen. I am sure that the external device is not damaged because there is no problem to use it as a startup device when connected to my MacBook Pro.
Otherwise the devices work as they should. If I connect them to my iMac then they will appear on the desktop, etc. The only thing which does not work is that they cannot be used as startup disks, even though they work fine as startup disks if connected to my MacBook Pro.

Based on your description it is very hard to tell what is going on.
You appear to have an i7 iMac. That model was delivered with Snow Leopard (10.6.x).
My guess is that your external disks may have a version of OS X that predates the version supplied with your new iMac. You cannot run an earlier version of OS X than what was delivered with your Mac.

My mac mini will not shutdown with either Mavericks or Yosemite (following a clean install)

First noted while running Mavericks, my Mac-Mini will not shutdown. It just hangs on a black screen with the little icon. I created a clean user account and the problem went away. Rather than do a fresh install of Mavericks, I waited until Yosemite came out. I reformatted the drive and did a fresh Yosemite install. I then restored my apps and data only to find the problem is still present. I've also tried stopping many of the applications I would normally expect might cause the problem with no luck. And I tried the one Yosemite suggestion regarding deleting the Library/Caches folder content with no luck.
My naive question: following the fresh install of Mavericks, should I have done a re-install of my (very many) applications instead of a restore from an image?
I've tried looking at the system logs after I've forced a shutdown with the power button but there's nothing I could find that shows any problems.
Any other suggestions of things to try would be appreciated.

Hi,
Thanks.
It is running 10.5.8.
I am trying to boot up an external drive with 10.5.8 on it. It works on my Macbook Pro which is running 10.5.8, runs on my IMAC running SL. But doesnt work on the mac mini?
It had been running SL, however there are a number of programs I have like Windows Live Sync which are not yet compatable with SL so i downgraded to 10.5.6 which came with the Mac Mini then loaded all updates.
It seems to just go into an auto reboot as soon as i click on it.
i thought it might be the firmware? Is it possible to downgrade them and then re-install?
I have reset the PRAM.
Any help would be appreciated.
Thanks

Will not start with hd

Insatalled a WD5000 hd in intel 21" imac 2006 worked fine for a couple of months then tried to switch on and got the Apple logo and spinning wheel. Tried to reset PRAM, starting from DVD and in Target mode - nothing. Will not respond to keyboard. Replaced old drive - no problems. Whats happened?

4 hours by bus to an Apple store.
So Original Drive(O) working Ok. but computer will not start from WD drive by usb. Got a 3.5 external case and checked WD drive using Disk Utility. After about a minute Disk Utility stops & says "disk needs repairing". Repair disk and Utility says "Ok". Run a check again and "OK" Try to start computer from WD with usb but no good so run Disc Utility again and it stops and says "disc needs repairing". Went through this process 4 times, same result.
If I try to start computer with WD pluged in by usb it will not start. I must disconnect and then it is Ok.
Got a Seagate(S) drive & copied WD using "Restore" then tried to start computer with S drive over usb. Same result as with WD, disk needs repair etc.
Don't know what I did but computer will not start from O drive now so no computer.
Drive WD & O show up Ok on a Macbookso they seem to be Ok.
HELP.

Apache will not start with fastcgi

We use an acgi called LiveIQue for our website. This plugin requires FastCGI to render the pages. Works fine with 10.3. We've just purchased and installed a new Intel Xserve with 10.4.8, and every I install the FastCGI module, apache will not start. If I comment out the FastCGI, apache starts.
Anyone else having this problem.?

I just configured and tested mod_fastcgi and can say it works with apache 1.3.33
I understand it can also built for apache 2 however I haven't done this yet and I may eventually get to it.
As well, looking into fastcgi I decided to try and build php as a fastcgi application and install it with lighttpd (with all the bells and whistles) and this also works rather well, speedy for what it does.

My Mac book will not start

My Macbook Pro will not start . I have apple logo anh the circle. Any one halp me please

Start your MacBook with the original DVDs that came with your system. Then repair your hard drive with disk utility, also repair permissions. http://support.apple.com/kb/TS1417

Power mac g5 will not start

please help me !power mac g5 a1047 will not start!

A1047 refered to all PowerMac G5 towers, as this page explains. What you need is the EMC#. That will tell you if you have a liquid cooling G5 tower, and if you do, that's another reason many fail to start because the coolent can leak.

Mac CF8 will not start with Java 1.6

Similar Messages

Maybe you are looking for