Mac.Mini and Mavericks failure

Hey there,I am trying to upgrade a 2011 mac mini to.mavericks. The installer quits with a failure notice and then restarts only to fail again. I am stuck in the loop. Does anyone have any advice on this situation. Thanks for any help and advice.

we tried a few other things and then made an appt at the apple store.We went out and were home fairly quickly,unbelievable imo. They had to completely erase and then reinstall. The test they ran told us it was a software issue so then we knew it was most likely fixable. We brought it home and we seen to be fine.
It was a bad install I guess. I did everything the exact same way but somehow it got locked in this loop.
There was no charge and our helpers were great. I am gonna be install shy for a while though.
thanks again linc. Sorry I cant tell you some of the tech terms we were hearing.

Similar Messages

Mac mini and mavericks

When my Mac Mini wakes up from sleep, the monitor screen is pixellated and the computer won't respond. Has anyone experience this and do you have any suggestions for fixing it? Many thanks.

we tried a few other things and then made an appt at the apple store.We went out and were home fairly quickly,unbelievable imo. They had to completely erase and then reinstall. The test they ran told us it was a software issue so then we knew it was most likely fixable. We brought it home and we seen to be fine.
It was a bad install I guess. I did everything the exact same way but somehow it got locked in this loop.
There was no charge and our helpers were great. I am gonna be install shy for a while though.
thanks again linc. Sorry I cant tell you some of the tech terms we were hearing.

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?

I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

Mac mini 2009 mavericks won't boot. Blank display no logo,etc. Tried all keyboard boot functions, no help. replaced RAM w/known good. No help. Removed HD mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite a

Mac mini 2009 Mavericks won't boot. Chimes and power light comes on. USB ports have power. Blank display no logo,etc. Tried all keyboard boot functions, no help. Replaced RAM w/known good. No help. Removed HD and mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite and was able to boot another mini from HD mounted in external enclosure, reinstalled HD still no boot. Any ideas on how to proceed appreciated.

- Make an appointment at the Genius Bar of an Apple store. You have a hardware problem.
Apple Retail Store - Genius Bar

File sharing between Mac Mini and iMac "breaks" after reboot of either device, and won't restore. Why? Running Maverick 10.9.1 on both. File sharing is setup on both. Help.

I'm a new user - recent convert from longtime Windows to Apple. Thought having desktops and computing aligned with phones and tablets would help. Not so far.
I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1. File Sharing is set up on both. If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart. Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row. File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem. Screen Sharing also works between both without fail, and comes up after reboot of either. No problem there. Only difficulty is from Mac Mini to the iMac.
Why? Any ideas?

Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac. NEVER happens automatically.
This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored. Real bummer.

I'm using LR5.7 on a Mac Mini running Mavericks and when I attempt to import a folder of new RAW photos from my external drive into my catalog instead of seeing a preview of each thumbnail photo I see the following message displayed: "Preview Unavailable

I'm using LR5.7 on a Mac Mini running Mavericks and when I attempt to import a folder of new RAW photos from my external drive into my catalog instead of seeing a preview of each thumbnail photo I see the following message displayed: "Preview Unavailable for this file." If I highlight any other folder of photos the previews are all there. What is the likely reason for these previews being unavailable? JohnnyCam

What camera took these RAW photos?
Did you use any Nikon software to transfer the photos to your computer's hard disk?

My new mac mini with Maverick does not go to deep sleep even if i press power button or Apple-Sleep mode.

Hi.
I have my new mac mini with Maverick that does not go to deep sleep even if i press power button or menu Apple-Sleep mode. He goes only to something like stand-by (power lid is on; after i turn off and then turn on the power he does not wake up just starting). I tried "sudo pmset -a hibernatemode X", tried mode 0,1,3, and even 25. nothing helps. he goes to deep sleep (when all data on HDD) only first time after i change hibernatemode couple times and force it to sleep. Today i even tried to force it to sleep (menu Apple-Sleep mode) and NOT turn off the power for whole night, in the morning he is in this "stand-by" mode anyway.
Could anyone help me please? i need it sleep but don't want to keep my power on for whole night.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Mac Mini and USB 2.0 hubs (hubs stop working within a month)

I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?

Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
Message was edited by: blick
Message was edited by: blick
Message was edited by: blick

Mac Mini vs Maverick upgrade

Hi - I've got a Mac Mini and am currently on 10.8.5. My boss has just upgraded to Maverick and I can now no longer access her Pages and Numbers docs. When I try to upgrade Pages and Number the apps store tells me I need to upgrade my system. Is this right ?

The newest iWork applications have got a different iWork format that isn't compatible with older iWork versions. If you want to use her documents, you will have to upgrade to OS X Mavericks. As your Mac mini has got OS X 10.8.5, you can upgrade to OS X Mavericks, so open the Mac App Store and download OS X Mavericks free of charge.
Make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com
After upgrading, open the Mac App Store, go to Updates and install the most recent iWork version

No sounds on Mac Mini after Mavericks Installation

I recently installed Mavericks on our Mac mini and there is no sound. We have a set of speakers
hooked up and havent changed the settings. Please advise!

Unplug the speakers. http://support.apple.com/kb/ht1379
Make sure internal speaker works then plugged the external ones.

Using iMac6,1 Intel Core 2 Duo with Mac mini for Mavericks?

Hello,
I am using iMac6,1 (white) Intel Core 2 Duo which works perfectlly fine and I hope to keep using this machine as long as I can.
I've learned, however, that OS Mavericks does not run on my iMac6,1 and Apple will no longer support it.
I am very attached to this machine and am not ready to face a new iMac display with a bold black frame...I just don't find it very attractive.
So I came up with an idea to buy a Mac mini and use my white iMac as a display.
Does this idea work?
I know nothing about computer so please laugh if I am being silly.
Now here's the specs of my beautiful white iMac if it helps;
Model Name:
iMac
Model Identifier:
iMac6,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.33 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
667 MHz
Boot ROM Version:
IM61.0093.B07
SMC Version (system):
1.10f
I recall having added memory and replaced a graphic board at a local Apple Store five years ago but I am not sure if it's shown here.
Thank you everyone always for this awesome communities.

I am very attached to this machine and am not ready to face a new iMac display with a bold black frame...I just don't find it very attractive.
So I came up with an idea to buy a Mac mini and use my white iMac as a display.
Does this idea work?
I know nothing about computer so please laugh if I am being silly.
No, however there is an app you can try if you want. It's called ScreenRecycler

Mac Mini and DVI to ADC adapter

I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Mac Mini and thunderbolt/vga to LCD TV

Hi All,
Here is an interesting one......
I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them. The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
The HDMI/DVI is not used.
In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor. If I then change cables without a reboot, the LCD TVs show correctly!
I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary. However, on reboot it's as if the details are all forgotten!
Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs. That said, I wanted to put my environment out there and see if anyone had an ideas.
Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
Thanks for ANY ideas!!!!

Hey Spost!
You have explained exactly what happened to me last night. I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week. I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.
Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet" airplaying prior to the move worked great ... then last night 4:3 Green Screen.
My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out. Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac.
Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

Mac.Mini and Mavericks failure

Similar Messages

Maybe you are looking for