Mac mini - receiver pass-through

Hi guys,
I am assuming this is very possible but just wanted to double check before i take a plunge. If i wanted to run my mac mini into my Yamaha receiver, then from receiver to my TV, I would be able to do that with just HDMI cable going from mac mini to receiver since new macs can run video and audio through HDMI?
Am I correct on this?

I have been running this set up with a  Yamaha
receiver since September 2010.   You should also
go into Audio Midi setup and set the output to
2 channel 20 or 24 bit to allow DTS and AC3
audio passthrough to the receiver.
Also as a note, because of the graphics chip in
the current Mac Mini, DTS HD and True HD are not
supported, only the core DTS and AC3.

Similar Messages

  • Mac Mini behaves poorly through DVI at 1920x1080 on HDTV displays

    I recently purchased a Samsung LN-S4695D - a 46" LCD TV capable of 1080p with HDMI and VGA inputs. I've had been using my 23" Cinema Display + a Mac Mini G4 + Rotel Amp as the centerpieces of my Home Theater, and decided to change out the display to accommodate a gaming system and perhaps some other digital or component inputs (and, of course, nab a larger viewing surface). It seems like a fairly standard use of the Mini, but unfortunately many of us are running into disappointing results using our Minis as connected to an HDTV display. I'm writing here to see if we can clear up the issue with the mini and to attempt to identify reasonable workarounds or solutions until Apple gets the Mini right for HD home theater.
    The current problem with the Mini and the Samsung TV/Display is that when the Mini is connected via DVI-HDMI (with a Monster 400 2m cable) to the display and asked to run at 1920x1080 (60hz NTSC) it does a reasonable job until it is required to refresh a lot of pixels (scrolling through album art in iTunes, playing DVD or other video, etc.). At that point, the screen fills with bands of static, and (if the rate of change is sustained) eventually looses the signal all together. With heavy scrolling operations, the signal returns as soon as scrolling stops, but with full-screen video it usually stays out until the mac resets its video resolution. Another article shows examples of this "DVI static" here:
    http://www.freewebs.com/themagius/minidvipics.htm
    So it is clear that the Mini and HDTVs don't play well at 1080 resolutions, as many of you have attested to. The samsung seems to do a better job than most with the Mini in that it it actually renders the 1080 as well as other resolutions, but flakes out on fast updates. While some other resolutions are also problematic, it is important to note that 1280x720 runs flawlessly on the Samsung, and is currently how I have mine set up (VGA input was too disappointing compared to DVI, though it scanned great and fit the image w/o over/underscanning.). Also, my Powerbook G4 1.25ghz (older than the mini) powers the Samsung perfectly at 1920x1080 as a secondary display, running DVD video or anything else that I throw at it, which leads me to believe that the mini is the problem. Here is another story very similar to mine that reports almost the same results with a Sharp LCD panel:
    http://www.avsforum.com/avs-vb/showthread.php?p=5940932
    So I've three sets of questions for Apple and the rest of you on this forum:
    1) Why does the Mac Mini underpeform with the LCD display? The Powerbook works great, and the mini works great with my Cinema display (also 1920x1080) - where is the disconnect between the Mini and the Samsung? I understand very little about the actual details of DVI signals being carried across the wire, and don't understand what would cause the Powerbook to succeed, but the Mini to falter.
    2) Assuming the Mini video hardware is at fault, has Apple improved this with the new Core 2 Duo line? Has anyone had success where previous Minis or other Apple hardware failed at 1080? If not, is there any announced intention to make the hardware that is positioned as being most ideal for the living room (ie, Mac Mini) actually DVI/HDMI-compatible with the finest HD living room devices?
    3) An unfortunate sideffect of the DVI connection to the TV is that it requires the image from the Apple device to be oversanned (about a menu-bar's worth of pixels disappear on each edge) or underscanned (2" of black space around the image). Is there a common industry standard to correct this? Who is managing the overscan - the TV or the Mini? Also, can any utility, such as ScreenResX correct this until Apple manages to build in correction options into the OS for their living-room devices?
    Thanks for all the help! Hopefully we can outline clear answers here in this thread for everyone else having similar problems.
    Mac Mini G4 Mac OS X (10.4.8) Samsung LN-S4695D, Monster 400 DVI-HDMI 2m cable

    David,
    Great post. There's a lot to digest here. Let's get started!
    The first question relating to noise, or static, over a TMDS (DVI) connection has to do with with the interoperability of various TMDS transmitters and receivers and how they are implemented. At this point in the market place there are thousands of combinations of transmitter/reciever pairings and obviously some are working better than others.
    If you were to observe a TMDS signal with a scope there is something called the "eye" which is framed by the swing voltage and the bit time. When the eye collapses and is encroached upon, digital noise is the result. The noise margin is degraded by higher bit rates. That is why the mini and your TV are working at 720p but failing at 1080p...because the dot clock is that much higher for 1080p. The solution for cases such as this is to build a custom 1920x1080 timing that has reduced blanking, which allows for the lowering of the dot clock. Generally you can lower the dot clock sufficiently to get the noise to stop. LCD displays are relatively immune to reductions in blanking time so you can squeeze a lot out of a timing that was designed more with a CRT in mind.
    To answer your second question, you can't fairly say the problem is with the mini. When you consider TMDS compatibility between two devices you have to take a whole system view. This includes not only the transmitter (mini) but the transmission line (PCB traces from the TMDS transmitter inside the mini to the mini's DVI connector -> the cable -> PCB traces from the DVI connector on the TV to the TMDS receiver in the TV), and the receiver. All three have to work together to make things come out right. You could probably just as easily find a display that works well with the mini that doesn't work with your PowerBook. It can be really had to pin the blame down to one device except in the most obvious cases where a certain device seems to be incompatible with just about everything. But I don't think the mini can be labeled that way. Compatibility is definitely an issue the industry still struggles with, especially at the higher clock rates approaching the 165MHz TMDS speed limit.
    As for question 3, overscan is being forced by the TV, not by the mini. And, no, utilities like SwitchRes X and DisplayConfigX cannot be counted on to reliably deal with this except in the case of pure analog displays with magnetic deflection systems (e.g. old TVs and monitors). Once you have a digital processor involved and a matrix addressed display, tweaks to porch timings and blanking and such do not have predictable results. It seems to work in some cases but it is basically voodoo when it does. Purely luck.
    If you want, I can help you to build a reduced blanking, 1080p timing that will most likely eliminate the DVI static. But you'll still be stuck with overscan. I should point out that a lot of manufacturers are starting to "get it" with respect to the public's desire to attach computers to their hi-def LCD televisions. I see a real shift in 2006 models. I believe the current crop of FHD (Full HD; native 1080) LCDs from the three "S" companies (Samsung, Sharp and Sony) all can display 1080p bit-for-bit now, meaning no overscan. So at least that is changing for the better. Write back if you want help with the timing.
    Cheers. And thanks for starting this great thread.

  • Connecting Mac mini to internet through Xfinity router

    This one took me a couple weeks to figure out, and I've seen a couple of similar posts in the forums, so I decided to post my findings here in the hope that it will help someone else.
    Short version of the problem: I have a Mac mini (mid-2010 server version) that would connect to the Technicolor TC8305C WiFi router that was supplied to me by Comcast, but it would not connect "through" to the internet.
    Details: The Mac mini connected automatically to the Wi-Fi (via DHCP) of the router, but nothing would connect "through" to the internet -- not Chrome, not Safari, not Mail, not the App Store, nothing. This was baffling because every other device in the house (3 laptops, 2 iPhones, and an Apple TV) all connected just fine. I checked all of the settings in the Network pane of System Preferences, comparing the Mac mini's against each of the laptops; all of the settings were the same (default, "out-of-the-box" settings). I thought maybe the problem was something at the OS level because the Mac mini was running Snow Leopard server and the laptops were not (two were running Mavericks, and one was running Leopard).
    Here's where it gets weird... I connected the Mac mini to the router using an ethernet cable and everything worked normally for the wired network device. I was able to use the App Store to update the OS on the Mac mini to Mavericks. However, after I disconnected the ethernet cable, the problem came back and the Wi-Fi would connect to the router but not to the internet.
    I double-checked that any "server" software on the Mac mini was turned off -- e.g., that it was not trying to serve as its own DHCP server. As I suspected, none of these services were on, so that wasn't it either.
    In that same vein, I tried setting a static IP for the Mac mini in the router's control interface. Again: no luck.
    Lastly, I got this weird idea that the only remaining difference that I hadn't tried was the pre-configured IP address prefix octets.
    Solution: I reconfigured the router to use 192.168.x.x (like my previous router did) as the network prefix instead of the 10.0.x.x prefix that it uses by default. After I made that change in the router, everything fell into place and the problem went away. I never did figure out the reason this change was significant, but as I said -- it was the only thing that worked.

    Interesting, thanks for the report/tip!

  • Help - getting internet on a Mac mini (sans Airport) through Express

    Hi, let me give you a little background. I am trying to connect a mac mini that as the title says has no airport. I have used an airport to configure it (through an ethernet cable) to join an existing network. Now, once set up I can hook my powerbook and express together and connect to the internet (all of this is with the PB's airport turned off mind you). That leads me to believe that everything is going well, so I take the cable out of my PB and connect the Mini. At this point nothing happens, no internet connection is formed. I try to access the settings for the Express through the Airport Admin utility, yet cannot find it unless I have just factory reset it. I also tried downloading the latest AirPortUpdate from the Apple site.
    So there you have it, anyone know how to get the darn Mini on the network through the express?

    Use "Applications > Utilities > Airport Admin Utility" to configure the Express base.
    If that's done correctly, the Mini should detect the internet connection automatically after a few seconds after pluging the Ethernet cable in.
    If not, check "System preferences > Network" and select "Automatic" as "Location".
    Post back if you succeeded or not.
    chris
    Various Powerbooks   Mac OS X (10.4.2)  

  • Mac Mini G4 Audio Through TV?

    Hello, I have just purchased a Mac Mini G4, and before it arrives this week I want to get everything ready for it.
    I will be hooking it up through my TV as I do not have a monitor, and I will be using VGA, I know it uses DVI but I will use the converter.
    Anyway what I want to know is, how will I get sound? I won't be using much sound, it is more just for the startup bong, and maybe the odd song. So is there a way for me to use my TV as a speaker for it? If so how do I do this, or is there an internal speaker in the Mac Mini G4/

    The G4 Minis have:
    The system contains a built-in speaker and an analog 1/8-inch stereo Mini jack for sound out at the back of the case.
    Use the jack as an audio input to the TV

  • New mac mini audio out through usb

    Do any of you know what is the output i would get if i connect my mac mini to my hifi stereo to playback my songs that are 24bit 96khz, can i get that resolution out?

    You certainly should be able to do that, not sure on your setup, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • Mac Mini not transmitting through the DVI cable to the display.

    I have been using my Mac Mini with a MAG display, no problem. While traveling I used a Samsung display for a month no problem. Now I am back home and the Mac Mini will not transmit a signal to the MAG display. The cable and DVI converter are good and work with the MAG when plugged into my laptop, but not when plugged into the Mac Mini. How do I fix this problem? Thanks.

    Apple recommends starting the TV/display first. Connect the cable and adapter to the TV and turn on the TV.  Turn on the Mac mini and after it has had time to start up completely, connect the adapter to the Mac mini. Hopefully the mini gets the proper EDID signal from the display and adjusts its signal output accordingly.

  • Playing Xmas music remotely through Mac Mini & TV (iTunes? Airplay?)

    Hi --
    In anticipation of the holiday season I would like to configure our house to play music throughout various rooms from a central iTunes source. We have a Mac Air with speakers in the kitchen, and an Airport Express in the dining room with speakers attached that also plays the same music from the Mac Air in the kitchen. We have a Mac Mini in the living room hooked up to a Samsung HDTV, and I would like to similarly play the music from the Air on that Mac Mini + TV combination, but can't figure out whether that is possible.
    The iTunes on the Mac Mini recognizes the iTunes instance running on the Mac Air, but as far as I can tell that only lets me access the music library on the Mac Air, i.e. it would require separately triggering the iTunes playlist from the living room, rather than centrally from a single iTunes instance. The Mac Mini is connected through Cat5e to our network, and we don't have an Airport Express nearby, else I would pipe the music through the AE.
    I would prefer that the music source be iTunes on a Mac Air in the kitchen, but could probably make a centralized iOS app work instead if needed. Either way, is it possible to use this Mini + TV set up as a music receiver, playing music through the TV speakers? E.g. make a Mini behave like a set of remote speakers? Or an Airplay client?
    Thanks in advance,
    Ramon
    P.S. Please let me know if this post is better suited to another forum -- given the mix of technologies at work I wasn't sure where to start...

    iTunes itself does not act as an AirPlay receiver only a transmitter. There is at least one hack to make a Mac act like an AirPort Express i.e. an AirPlay receiver and this is called ShairPort (or MacShairPort for the Mac version).
    The official and easy solution would be to get another Apple AirPort Express or an Apple TV2 and set it up as a second destination. Or if your wanting to go all the way, get several Sonos ZonePlayers as that is the Rolls Royce solution for doing a multiroom audio setup.

  • New Mac Mini 2012 - HDMI dolby surround

    Hi,
    I returned my Mac Mini 2011 because of the poor (lack of) dolby surround support outside of Apple iTunes.
    I am very interested to know if somebody can confirm the new Mac Mini 2012 has better dolby surround support. I would like to connect the Mac Mini to my dolby surround receiver with plug and play support in Mac OS X Mountain Lion. And of course compatibility with media software (e.g. VLC or other players).
    Thanks for your comments!

    The Mini will pass through Dolby and DTS encoded tracks to
    any device which can decode it with XBMC, PLEX, VLC,
    MplayerX, etc.
    The signals can be passed through via HDMI or optically.
    The proper set up is required in the Audio Midi Setup utility
    and in the app.  If you are expecting decoding within the
    Mini to multichannel PCM, I don not believe any apps are available
    to do that (or I am just not aware of them).
    If your are expecting the higher level encodings (DTS-MA or Dolby
    True HD), at least up to the 2011 models, they do not contain the
    required "protected audio path" to support those formats.

  • Logitech MX Air with Mac Mini

    Just bought a Mac Mini today, displayed through my 42in Plasma TV. I wanted to find out if anyone knew about a 'freespace' or optical air mouse, like the Logitech MX Air Mouse, that could work with my Mac Mini. Or would the MX Air work with it? I'm just looking to be able to sit on my couch, and use a mouse without having a table in front of me.

    Try downloading the DMG file again. It may be corrupt or incomplete.

  • Printing from Windows XP to Mac mini

    Hi,
    May i know who has a successful story of printing from Windows XP to Mac or from mac to window xp.
    I have tried all the instructions in the book, and it doesn't work.
    I am printing from my mac mini to our printer in the office who has xp on it.
    The printer is canon i560 but it doesn't work.
    Please share with me what your expereinces is.
    Thanks

    Take a look at this article
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2231.html
    Also make sure you have set up your windows computer to share your printer. I have my mac mini printing wireless through my us robotics router on my windows xp printer. Print with it all the time, never had a problem.

  • Mac Mini keyboard and with Trackpad

    Hi all
    Having set up the Mac Mini to work through the TV and home cinema amp - I need to get a reliable wireless keyboard with built-in trackpad - probably via Bluetooth or using a RF dongle - I don't care.
    Has anybody found a good reliable one with a MAC keyboard layout?
    Thanks
    Craig

    Just bought a new Mac mini and exploring possible wireless keyboards with trackpads.
    Found one UK model: 'Keysonic 540RF MAC White Wireless keyboard with touchpad mouse', on Amazon UK. Looks like Apple layout keyboard with function keys (there is a PC version too).
    The US equivalent is the 'Adesso SlimTouch Wireless 2.4-GHz RF Mac Mini Touchpad Keyboard' on a variety of US websites. This looks nearly identical to the Keysonic, but is inexplicably much more expensive.
    Looking to get the Keysonic, but would appreciate any views on either of these products. Hope this helps.

  • Apple and the1.5GHz Mac mini (2005)

    Does anyone know why Apple hasn't officially told customers about the 1.5GHz Mac mini (G4) until they find out about it themselves by buying a Mac mini "1.42GHz" and discovering that it is actually 1.5GHz. Has Apple ever mentioned a 1.5GHz Mac mini (2005)?
    Apple Mac mini (2005)   Mac OS X (10.4.5)   PowerMac10,2: 1.5GHz, 512MB RAM, 80GB HD, BT/AE...

    Hi Nick,
    Apple has,
    Hope you appreciate this, it took a while to dig it out.
    Macworld December 2005 page 26 News In Brief:
    "Apple Secretly Bumps Up Mac Mini"
    "In response to reports on the internet that some users who purchased a 1.42 GHz Mac Mini received a 1.5 GHz system instead. Apple confirmed that "some Mac Mini systems may contain components that slightly exceed the published specifications. There are no changes to the published specifications or part numbers." "
    FYI We got a 1.5GHz Mini at the beginning of November '05
    Take Care,
    Lee

  • Mac MIni HDMI odd streaming A/V network issues...

    HI, I have the new Mac mini with HDMI port which is hooked up to my Pioneer plasma. I used to use a macbook pro for this and stream video using elgato's eye tv software from my mac pro upstairs to my tv setup downstairs using my 802.11N network running at 5 ghz. It worked great full 5.1 surround and 1080i video streaming flawlessly through the air. Then I sold my MBP and got the new mini, cloned my backup of the MBP to the new mini and I was up and running with my same system which was 10.6., I then updated it to 10.6.4 and all seemed great. The strange issue I have now is that when I am connected to my N network the video and audio that I am streaming is choppy like it is if I use my G network to do the same job which was never able to handle that much data and would be choppy when ever I tried it.
    Here is the strange part, if I switch to the G network the video and audio play back smooth as can be as if I were on the N network but I am on the slower G network?? So long story short what always played on my N network now can't but it is fine on the slower G network which never could and I mean never could do it before. The only change was in the puzzle was the new computer but it is running the same system as the old computer. Really strange....
    Any thoughts would be appreciated.
    Thanks

    You can check your signal by holding down option and clicking on the Airport icon in the menu bar. Look at the transmit rate via N, and G. Noticeable difference?
    I use wireless N on the 2010 Mac Mini from downstairs, through several walls, and, I get typical transmit rate (as shown on the Airport menu with option held down) of 216 or more. It is FAR faster than the Wireless G I used to use.
    When I replaced my previous computer running EyeTV and Plex with this one, while the "easy" way out is to simply load the OS over the backup, I would never do that. I always take the hard way" and install the OS the way I want it, and, then copy back the files I want. Yes, it takes some time, probably, several hours. This means I also have to re-install any software, which I am more than happy to do. I save the compressed backup (using Apple disk manager) for around a year in case I forgot a file or settings. By doing it in this manner, it's pretty much impossible to have any difficulties, don't have to worry about old files hanging around, get a chance to re-organize things as I copy them back, get a chance to not reload things I may have put there at one time but never used, etc. IOW, I end up with a clean machine.
    Archive and install or any other version of other techniques, not for me. I just like things simple, guaranteed, and clean. Easy way out is never of interest.

  • May i buy a mac mini and use as time capsule for my ipad?

    If i purchase the Mac min, instead of Timm capsule, can i use it as a automatic backup for my Ipad?
    Take note:
    a/. my home as the router, and i am connect my Mac mini to internet through wifi.
    b/. Ipad also in the wifi zone

    The iPad would be backed up to the Mac when you connect it to iTunes on that Mac and do a sync and backup.
    When iOS 5 comes out for the iPad tomorrow, you will also be able to a more limited backup to the iCloud service Apple are providing free of charge which also launches tomorrow.
    Note: The iCloud backup is not as full a backup as doing a full sync and backup via iTunes.

Maybe you are looking for