Mac Mini with A Blinking Folder and a Question Mark on it YAY!!!

ok I just came into work today to see that one of my Mini Macs has folder with a Question mark on it and i tried to put the OS 10.2 disk in to try and do a reinstall and can't get it to do anything and now can't get the CD back out lol I think i need to take a hammer and just break this thing or just let it be my paper weight. any help would be great thanks
Cliff

The flashing question-mark indicates the system can't locate a valid MacOS copy to boot from, which in turns would indicate there is likely to be a problem with the hard drive. It may be that the drive itself has failed or is failing, but it could also be that there is some data corruption or a problem with the drive's directory or data structure which prevents the system finding the MacOS install on it, or from reading it.
In this situation, booting the system with a valid install disk, and then using the Disk utility copy on the installer to check the drive and attempt to make any necessary repairs is the right place to start. If that doesn't work because there are problems which Disk utility can't fix, then either a good commercial utility such as Disk Warrior is needed, or the drive can simply be wiped and MacOS installed again in an 'erase and install' to get the system back into service.
However, the first step is to get the 10.2 disk out and a valid installer in, and to check the internal drive for errors.

Similar Messages

  • My screen turns gray with a blinking folder and a question mark

    My computer started going really slow so I tried to restart it. When it started to turn back on the screen just went gray for a minute or two then a darker gray folder with a question mark on it started blinking in the middle of the computer. little help?

    Hi,
    Before you buy a new hard drive, you may be able to get it fixed free of charge.
    MacBooks equipped with Seagate hard drives model ST96812AS (and possibly other Seagate models)
    with firmware 7.01 have experienced a higher than normal failure rates. The failure mode is that the heads detach from the positioning mechanism.
    You can use System Profiler to see what type of hard drive is installed. If you have gotten the screen with the folder and blinking question mark, and you do have a Seagate ST96812AS installed, I recommend calling AppleCare or taking your Macbook to a retail service center. There is a good chance you may be able to get the drive replaced, even if your MacBook is no longer covered by a warranty.
    The hard drive is considered to be a user serviceable part, so you might not have to send the entire computer in, but rather swap only the hard drive via mail.
    Best wishes for a problem resolution,
    Bill

  • What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

    What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

    I don't have original discs that it came with.
    Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
    Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
    Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
    The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
    it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
    If it has a slot-loading optical drive like this one:
    things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
    http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
    has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
    When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
    The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
    Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
    3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

  • HT5446 If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

    If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

    Additional information from Linc's post. Basically, only one additional partition can be added to a Fusion Drive and it resides on the HDD.
    Do computers that come with a Fusion Drive support Boot Camp?
    Yes. Use the Boot Camp Assistant to create a Windows partition and install Boot Camp. The Windows partition will exist on the hard disk drive, not the Flash drive, and is not part of Fusion Drive Logical Volume Group. 3TB Fusion Drive configurations need to update to OS X Mountain Lion v10.8.3 or later to install Windows 8. See iMac (27-inch, Late 2012): Boot Camp alert with 3T hard drive for more information.

  • Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.

    My Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.  I've tried Option key, and Control S keys and it still will not boop up.  Can anyone help?

    If you are running Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are running Lion or later:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.

  • I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

    I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

    Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
    If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
    Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
    Try your Recovery partition first and if that doesn't work, use Internet Recovery.
    Clinton

  • My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?

    My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?

    It means a valid system cannot be found. You need to reinstall OS X.
    If you have Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you have Lion or later:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Macbook Air - White/Grey Screen with a folder and a question mark

    Out of the blue , my macbook air stopped starting up and strted to show me a white/grey screen with nothing but a folder and a question mark . After searching on the internet for solutions and trying to reset my PRAM setting , it still wouldn't boot up . I opened up disk utility and going through internet recovery , I ran the first aid verification on my MAC OS X Base System and it said that it found no problems . I can't restore or erase by the way and i really wouldn't erase my files as I have very important files on my mac . Moving on , I tried to reinstall OS X , but apperently it needs a disk to install OS x on and since none appear , I tried using an USB . After creating a partition and erasing everything on my USB , not happy about that  , it wasn't big enough for the OS . So now I am basically stuck in the mac white screen Limbo .
    Any sort of help would be fantastic and please do keep in mind that this is a macbook air and I do not have a place to put DVDs into . All I have read on different forum pages didn't help so i decided that it would be a good idea to create my very own thread . I am not very sure about the Mountain Lion version ,but I am not very sure that it matters .

    Out of the blue , my macbook air stopped starting up and strted to show me a white/grey screen with nothing but a folder and a question mark . After searching on the internet for solutions and trying to reset my PRAM setting , it still wouldn't boot up . I opened up disk utility and going through internet recovery , I ran the first aid verification on my MAC OS X Base System and it said that it found no problems . I can't restore or erase by the way and i really wouldn't erase my files as I have very important files on my mac . Moving on , I tried to reinstall OS X , but apperently it needs a disk to install OS x on and since none appear , I tried using an USB . After creating a partition and erasing everything on my USB , not happy about that  , it wasn't big enough for the OS . So now I am basically stuck in the mac white screen Limbo .
    Any sort of help would be fantastic and please do keep in mind that this is a macbook air and I do not have a place to put DVDs into . All I have read on different forum pages didn't help so i decided that it would be a good idea to create my very own thread . I am not very sure about the Mountain Lion version ,but I am not very sure that it matters .

  • White screen with a folder and a question mark in the Folder

    Hi,
    My daughter's Desktop Mac Pro won't reboot. On reboot, it shows a white screen with a folder and a question mark within, It just stays there and nothing happens. Is this a problem with a dead hard drive, dead processor, faulty USB connection, problem with airport.? We need advise and help, please!
    effie imperio

    Hi, Anonymoustache, thanks for responding.
    Yes, I think it is "a flashing question mark". If it is flashing, you think it is a hardware problem like a dead hard drive? I had a flashing question mark with my Power book G4 and Apple replaced a dead hard drive.
    Thanks Hatter, I will convey your response to my daughter and see if it will help.
    effie imperio

  • TS2570 i see a folder and a question mark when i restart my macbook pro

    i see a folder and a question mark when i restart my macbook pro

    There are four general causes of this issue:
    1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
    2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
    3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
    4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
    (79011)

  • Mac Book Pro has blinking folder and will not start.

    MY Mac Book Pro mid 2010 has the blinking folder and is froze, I have entered into the Internet recovery mode and tried to reinstall OSX system.  And in the Disk Utility there is no hard drive to select.   What is the next step?  

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • On start up my mac is showing a folder and flashing question mark sign?

    On start up my mac shows a folder sign & flashing question mark?? Help and Why??

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
    Boot From The Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • White screen with a folder and a question mark on the folder and its blink?

    I was on my computer and it was basically frozen so I turned it offf manually. Then I tried to turn it back on and it it made the noise like it was turning on, but then there was a white screen. Then I turned it off again and it did the same thing exept that now it has a little blinking folder with a question mark in it. Then I turned it off again and it did the same thing as it didi the 1st time......HELP ME !!!
    (oh now it just turned itself off)

    You can try starting up while holding the 'Option' key down. This will hopefully present you with your drive to select from. If not, insert your Install DVD and restart with the 'C' key down. This is called booting to the DVD. When the topmenu appears, launch Disk Utility and then verify/repair both permissions and the drive itself.
    If the drive does not appear in Disk Utility ...you may have one of the faulty Seagate drives. If you are still within you standard 1 year warranty (or have Applecare) then that drive will be replaced.
    Do you have things backed up?

  • Can Lion run on Mac Mini with 1.83 GHz and 2GB RAM?

    Hey guys!
    at first, sorry for my may bad english.
    After years of windows strangulation i want to upgrade to a mac. but, there is a tiny problem: i dont have enough money for a new mac mini cause i'm a student und things like that.
    But i have enough money to buy me a mac on eBay . Maybe a "old" mac mini, but its a mac. On eBay germany (my homeland) i found a few mac mini's there in my budget. There's the Mac mini 2.1 with 1,83GHz and 1 GB RAM. So, i read that that dont work anyway because the RAM is to low.
    Now my question: when i buy such a machine and upgrade the RAM to 2GB, would Lion run on it?
    Sincere regards, Manuel from germany.
    Oh and Steve, if you read that, that's fine by me if you want to donate me a old mac from you.

    You are in luck.  The Mac Mini 2,1 is the oldest Mac Mini that with an upgrade to 2GB or 3GB will run Lion. That said. you'll want to purchase Snow Leopard while it is still available, if the machine hasn't yet been upgraded to Snow Leopard, as that is your key to get Lion installed after the RAM is upgraded.  This is a user to user forum, so it is unlikely "Steve" will be viewing your post.

  • Running Logic Pro 9 32bit on Mac Mini with 4GB of RAM and still crashing

    Why is Logc crashing and giving me "Memory Low" errors all the time? I am running 4GB of Mem with Logic Pro 32bit. I currently have a 27 track project and it is crashing all the time. Yet the sample "Killers" project is 80+ tracks and a video and Logic has no problem, I don't get it? What am I doing that is sucking up so much memory and how do I fix it?

    Morris133 wrote:
    Why is Logc crashing and giving me "Memory Low" errors all the time?
    Because your memory is low?
    I am running 4GB of Mem with Logic Pro 32bit.
    Try running Logic at 64 bit. I've noticed that even with 4 GB RAM it does make a difference with "memory low" projects.
    I currently have a 27 track project and it is crashing all the time. Yet the sample "Killers" project is 80+ tracks and a video and Logic has no problem, I don't get it?
    I get it. The number of tracks is not a very constant unit of measurement, it depends what kind of tracks they are, what plugins are loaded etcetera. You can have memory problems with 10+ sampler tracks, and room to spare with 100+ external MIDI tracks, to give a simple example.
    What am I doing that is sucking up so much memory and how do I fix it?
    How on earth would anybody but you know what you are doing?
    So what are you doing?

Maybe you are looking for