Macbook 2009 wont start up

Hello:
I have a MacBook 13' and it was working fine and then the mouse froze and I restarted the MacBook. When I restart it, it dings and then the apple logo comes up and that's it. No spinning wheel like some other users have had. I've tried some things that I have seen on here and YouTube and nothing seems to work. When I press the button to go to hard drive like some posts I've seen all I get is one hard drive option, not 2 like I should have. The power works still. Please help!!!

Suppose it's a Leopard.
Did you try resetting SMC as well as NVRAM?
Mac OS X: Gray screen appears during startup
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Similar Messages

Macbook air wont start, i need to reinstall my software

hello,
after a restart, my macbook air wont start, i see the apple logo and after a folder with a questionmark.. i run all the test's (holding D at startup) and everything is ok.. so i just need to reinstall my software, my problem is that i do not have any dvd , and i'm not sure wich version of os x i had. . is there any link that i can download an iso of my software?
Best regards..
JBe
<Serial Number Edited by Host>

Yours would appear to be an original 2008 vintage model, which unlike the more recent MBA systems did not have a recovery partition.
There is no downloadable source of the MacOS reinstall disk that I know of (none that are legal at any rate) but you should be able to get a copy of the DVD from Apple. The user guide for this model (http://manuals.info.apple.com/en_US/MacBook_Air_Users_Guide.pdf if you also do not have that) explains the procedure for MacOS reinstall using the original disk.

Macbook pro wont start with 3 beeps

hi
Few months back I purchased a refurbished macbook pro (late 2012 model) with i7 processor and 8 GB ram. Now after 2 months I experienced problem with mac - it wont start with 3 beeps. I looked at different articles in net and found about no memory bank problem. I opened the back and changed slots and it seemed to fix the issue. However the issue was recurring few times and ram was changed. Again the issue seemed to have resurfaced. I tried with memtest in single user mode and RAM passes the tests.
What else could be the issue around the macbook pro. Do you suggest taking it to local Apple store to get it checked?
Thanks

Test each module installed alone while switching slots (power down before switching and remove battery.) Do both modules work alone in each slot? If they do, then it would appear the memory is good as are the slots. So, something else is at play and only an Apple Store has the equipment to go further - make a Genius Appointment and take it in for service.

Macbook pro wont start, click when charging thats it

Hello,
I have a Apple Macbook Pro 15" model number: A1286 purchased in january 2011.
It wont start and has a very faint clicking noise when it is trying to charge. When the charger is on it the light is bright green but the charge button to show you the life left in the battery will not work as wont the screen or anything else.
Could someone asist me and let me know whats wrong with it please.
Regards,
Jimmy

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue.

My macbook 2008 wont start up

plz help, my macbook wont start up
Serial Number: Where on Earth can I find my Number????????????????

Hi there StammyCharger,
Welcome to Apple Support Communities.
It sounds like your MacBook isn’t turning on or it’s displaying a blank black screen. Take a look at the article linked below, it provides troubleshooting suggestions that’ll resolve most issues like this one.
Troubleshooting: My computer won't turn on - Apple Support
Cheers,
-Jason

Late 2011 MacBook Pro Wont Start

The little guy wont start, I ran diagnostics and found that it was displaying a code "-1006D" Does anyone know what that means.

Hello riflemanpro,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Have a nice day,
Mario

Installed new memory and Macbook Pro wont start.

I bought a total of 8GB from PNY for my mid 2009 MacBook Pro (2.8GHz Intel Core 2 Duo). I installed it and my macbook wont turn on. When I press the power button it just beeps. The LCD doesnt turn on. I reinstalled it a few times to make sure that it is sitting correctly with no luck. I reinstalled my old memory (2x2gb) and it works fine.
The new memory I bought is PNY 8GB (2x 4GB) Bual Channel DDR3 PC3-10666. The package says that it is compatiable with 1333MHz and 1066MHz. This is the listed memory on the PNY website for Mac laptops.
Am I using the worng type of memory? I'm pretty sure my MacBook Pro can take 8GB...right?
THANKS!

One beep indicates no RAM installed. See http://support.apple.com/kb/HT1547.
What happens when you reinstall the old original memory? Does the computer boot then?
You might want to read the information at macsales.com (OWC). Certain models had to be updated to take additional memory.
Specifically the NOTE: on this page: http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

MacBook Pro wont start, and is to hot

My Macbook Pro won't start and the bottom of it pretty hot. The light comes on like its in sleep mode, but wont power up.

nosaj49854 wrote:
Thank you very much, it just started back up, i thought thats what the problem might of been.
You're welcome. Glad it's working for you again.

2012 Macbook Pro wont start or charge

So my macbook pro 13in was around 20% before i went to work then when i came back to it, The Macbook pro would not start and so i pluged it in and the charger light flickerd from green to amber back and forth. I then tried my charger for my older 2009 Macbook White polycarbenite and when i used that ones charger the light just stayed off but i did know that ones charger did work with the Pro. My guess is the logic board is fried some how or the battery has faild but my guess would be that it would still be able to start even with a bad battery. The Mac will not make the start up sound or the led trun on.. on the frount of the computer.
Thanks for your help
Gino

Connect the charger that came with the machine to a good power source with not a lot of other items on the same power line from the circuit breaker.
Connect it to the Mac and perform a SMC Reset here and let it charge up for a few hours or overnight before using it.
1. SMC reset
>>Instructions to reset SMC
Disconnect other non-Apple and external hardware except (if applicable) a mouse and keyboard until your finished repairing your machine.
Problems solved: Fans blowing with no activity, machine is not booting, power button pressed and nothing happens, problems with indicators, Magsafe has wrong lights, battery is not charging, monitor and graphics issues etc. If the battery is not charged (from like letting it sleep too long), let the Mac charge up awhile afterwards.
Will not hurt the machine resetting if it's not broken.
Other related hardware problems (optional):
Check battery status: Hold option/alt key down while clicking on the battery icon in the menu bar, top right corner.
Magsafe: Use the correct/matching power supply charger with your Mac, not a less powered one from another Mac.
Apple: Laptop won't power up Apple: Computer won't power up Troubleshooting optical drive
Magsafe problems Magsafe problems more
No power on still? Data Recovery options: Is my personal data lost? Find the closet Apple repair/distributor
If that doesn't work, please make a appointment with Apple for a repair or evaluation, also if you haven't yet purchased AppleCare you should do so as well as a couple of backup drives.
Most commonly used backup methods

Macbook pro wont start. grey screen then shuts off

I have been having some problems with my macbook when my battery would die and i would plug it in and try to turn it back on it would take forever to start back up. Sometimes i woudl have to unplug, take out the battery then put them back in and zap the pram and it would start. Then today it just started taking forever to restart so i shut it down and tried to restart now it starts goes to the grey screen and the little thing starts spinning and then about 5 sedc later it shuts itself down.
PLEASE HELP

If the Apple Hardware test does not bring up any problems with the hardware, I would advise doing an archive and install before you zero out the drive and erase all of the data on it.
Some things to keep in mind:
If your computer shuts down while booted to the install disk (either the AHT or the installer) you're looking at a hardware problem.
If you need to erase and install or send it in for repair of a hardware problem, you will need to back up any data you do not want to lose before doing so. If you are unable to do backups, an apple store or authorized service provider can do data retrieval for you. Bear in mind this is an optional service and you would be charged a fee for data retrieval.

MacBook Pro wont start after 10.8.3 update

So I tired installing the 10.8.3 update from the app store and every time I did it I got the response that it wasn't downloaded properly, first on bad Internet at my house, then at school I used the really fast Internet and it was the same problem. Then I came here found that a bunch of people had the same problem, so I downloaded the combo update from apple.com from a recommendation by someone here
Now its one big shitstorm, after taking a half hour to install on my MacBook Pro ( its a 13 inch i got last august so its brand new), during the install I was on chrome and it kept freezing about 75% of the install complete I tried to shut every program running, that just froze the entire computer for about 5 minutes, let it finish and it said it needed to restart. It said that something couldn't close and it needed to be force quit, so I did that and let it restart.
It turned off, and started the loading screen with the apple and the gear below it spinning, then it froze, a half hour later it didn't change, i shut it off by holding down the power button and tried to start it again now it will go until the screen with the apple and spinning gear comes and then it will just shut itself off after about 2 minutes, tried safe mode, the bar at the bottom will load about 40% then it shuts off,
What do I do now, anything on my own? can i try and take it into the apple store or did I probably loose everything?

It sounds like your internal drive is failing, or has failed. What backups do you have?

Macbook white wont start up. stucks in a gray spinning apple logo.

Iv updated a security update few days 3/4 days ago. and after this problem happened. my macbook white 13" stucks in start up with a gray apple spinning logo.

Put your 10.6 install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.
Click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive

Macbook pro wont start up and clicking sound

Hi everyone
My girlfriend spilled a coke on my computer couple days ago and my MBP shut down immediately. After all i took it to the apple store in Turkey and they said the problem is from the battery and they took it off and I started to use it on charge until i get a new battery. All day i used my macbook pro on charge without battery on it. Anyway I turned my computer off and next day press the power button to start it up and it didnt start up at all. Mag safe works OK. Charger light is green light and everytime i press the power button I hear a clicking sound and my built in cam light is lighting up. I couldnt figure it out what is wrong.. If you guys had any problem like this before or know the problem about it please share it with me.. I will be appreciated.. Thanks

Problems related to liquid damage can manifest in different ways.
It is hard to recover from liquid damage.
Best.

Macbook Pro Wont Start Up After Update

Hey All,
I was in the middle of installing the most recent update for OSX when my computer froze completely. I shut it off by holding down the power button. Now, when I start it up, right after the apple, it goes to a screen with some script in the upper left hand corner, and a box in the middle with a picture of the power button telling me I need to restart. I've restarted it several times and it just keeps going back to that screen.
I have booted it up from the install DVD and run disk repairs and verifications, as well as checking the system profiler and utility, and nothing seems worng. I've tried starting it up by choosing to start up from the folder and it still didnt work.
If you've got any ideas, let me know. All your advice is appreciated.
Thanks!
Macbook Pro Mac OS X (10.4.8)

I meant to say that the system would have been made unstable after the semi-complete update (if it was in the middle of replacing a crucial system file).
An archive and install would replace all system files, so wouldn't hurt anything. You might have to reinstall any system-intrusive applications (Palm Hotsync springs to mind, if you have that) but it will certainly fix system corruption, if that is your issue.
After the reinstall, if you encounter a complete freeze again, then I would definitely be suspicious of hardware. Possibly the original RAM, but it could be somewhere else in the system, such as the logic board. In those cases, you would have to go back to Apple for repair. (Your Macbook Pro, that is, not you.)
Matt

Macbook 1181 wont start up

Hi. Some tea splashed at the back of my macbook and after that it would not start up. The screen flickers once and the fan comes on but no chimes or anything else. I had a spare logic board for it so I fitted that but exactly the same thing happens. i cant understand what else other than the logic board could cause it not to respond. Also changed the magsafe board too but that didnt work. only thing that is still the same really is the display. Can a display stop a mac from starting?

Try here > Mac OS X: Gray screen appears during startup

Macbook 2009 wont start up

Similar Messages

Maybe you are looking for