MacBook Pro Retina 2013 15" freezes when using safari

I have a 2013 MacBook Pro Retina 15" 2.7ghz, 16gb Ram with 512 gb SSD. Since the recent EFI update and the OSX 10.8.3 update, when I have been using Safari, my mac has become very sluggish and I get the spinning beachball whihch doesn't clear. I have only had this MacBook for 17 days. has anyone else had this problem?

hope there will be a fix soon…
Yours is not a common problem, and no fix for it will be forthcoming automatically anytime soon.
The symptoms you describe could indicate a failing Hard drive, and you should set all else aside and make certain your Backups are completely up-to-date.
"Any drive can fail at any time."
In cases like this, a visit to the Genius Bar is really the best solution. Your appointment at the Genius Bar for an evaluation is FREE, in warranty or out.
For problems with a physical component, or slowness problems, they have the tools and the expertise to quickly make things right. Their diagnostics also can give you the warm fuzzy feeling that the Hardware seems to be operating correctly.

Similar Messages

MacBook Pro Retina 2013 will freeze if waked from long sleep if left with open lid

Hello!
Have a strange problem.
My new MacBook Pro Retina 13 will not wake from sleep state if left with open lid for a long period of time. (8-12 hours)
Ship happens ONLY in this case and only if left with open lid.
Screen lights up, I see a user window with password invitation - but no mouse pointer is present and keyboard doesn't respond and the apple on the backside of the lid is light up even if I close the lid.
TimeCapsule backups are creted during sleep state, no other malfunctions detected during use - laptop funtions normally from any side except this problem

Solved.
https://discussions.apple.com/message/25858115#25858115

Can macbook pro retina display updated intel driver,using safari?How?

Hi!how are you ?my name is Chong Hooi Chang,i live in malaysia.i have buy macbook pro retina display,the macbookpro retina display inside have intel HD Graphics 4000,it this need go to intel web site (The Intel Driver Update Utility Installation)update intel HD Graphics 4000 or not,just software update only?i have go to intel web site updated using safari but it show me this message [http://intel-drv-ws.systemrequirementslab.com The Intel Driver Update Utility Installation failed. Possible web browser compatibllity,firewall or installation issue detected.]i already install Java!How can update Intel Driver using safari?How can solve this problem?thank you your help.

After the display is detected, you can go to sytem preferences>displays, click the arrangements tab and unchrck mirrioring you can then drag a pane to the external monitior, the window in the arrange pane with the white border on the top will be the one on your built in the other will be the one you can drag. You can select which way to drag it by moving the postion of the non white top bordered window to the left or right of the "static" one.
Also you can click "show diplays in menu bar" and it will put an icon there that you can use to change display prefes without having to go to syst prefes.
Hope this helps

Macbook pro is slowing or freezing when using fcp x

I am having a nightmare with FCP X performance. It just can't be right that problems I am having are normal. I have a new macbook pro with 2.6Ghz , 16GB Ram, 512 SSD and connected to a lacie thunderbolt rugged drive. Just about as good as it gets outside a monster mac pro right. When editing the projects I am getting consistent delays of a second or more and randomly I get ones that are longer and the machine freezes completely. When I try and look into it on activity monitor the only thing that seems to be taxed is the RAM but even that does not seem to be maxed. Sometime if I clip on another app there is a delay and I thought maybe that could be because FCP X is hogging the RAM but can't tell. All software is up to date. The projects do have mixed frame rates and resolutions but that should be ok. I have not even started to colour correct yet, there are a number of retiming and effects but nothing much.
It is driving me crazy as I am looking to use shortcuts and keyboard commands but I am constantly waiting….. very…very..frustrating. I have set prefs to better performance and tried proxy editing while editing. I have switched of background editing as well. I can not use this software anymore if this is what I must get used to. Please can anyone help with this as it is going to cost me money. I have been using FCPX for a while and don't want to have to learn a new one when this should work.
I am still unsure if I should render only when in original footage pref and if I shouod render before exporting. I do render as I thought it would output a lower bit rate if not.
Thanks for your time and any advice is welcome
A

With such a machine the slowness is *not* normal. Does it happen *all the time*?
You are right that low RAM is often the cause of slowdowns, but that would happen if your free RAM is in the tens of MB - it does not seem to be the case.
Do you have many projects and events available? All these take up RAM. You can disable the projects and events that you are not working on - use Event Manager or manually create a "Final Cut Events - Hidden" and a "Final Cut Projects - Hidden" folder and move unused events and projects in the Finder (while FCP X is not running).
The usual first recommendation is to trash your preferences. All sorts of misbehavior can occur if the preferences files get corrupted. Use Preference Manager (free from Digital Rebellion) to trash your preferences.

My Macbook Pro Retina Display keeps freezing when I open or try to view videos in Youtube. Its brand new, Ive had it for maybe 3 months now and I'm worried its a virus or something. Help?!

Help me please!!!

What browser are you using? If it's Safari, uninstall Flash Player and then reinstall it. Also, go to the Safari dropdown menu and choose the option to reset Safari.

13" macbook pro retina 2013 problem: blank screen when waking up from standby

I bought a 13" macbook pro retina 2013 about 3 months ago and it is for about a week or two that I encountered a problem: when I close the lid and open it after a while(or it goes to standby by not using it for some time and then I wake it up by pressing a button), sometimes it shows a blank dark screen(with mouse cursor) for about 15 seconds and then either the screen is turned off(and by pressing a key it shows the login screen) or it shows the normal login screen.

I also have this problem, and now the
NVIDIA GeForce GT 650M is not working at all
I use gfxCardStatus for work on integrated card and i can't use other displays obviously, because all video outputs (HDMI & Thunderbolt) are taking their ways from discrete card (but working on other displays is my profession of audiovisual artist). My world guarranty is over now, new motherboard costs near 1500 $ and now i don't want what to do.Maybe reballing of videochip will help me, but i'm afraid that not autorised service in my country will kill my motherboard at all. This is my first mac & i have lost many time for take the money for buyng it. I have so much frustration.

MacBook Pro retina 2013 do not start and no light on the magsafe

Hello
I have a MacBook Pro Retina 2013 13' core i5 2.5 8gb ram
My mac was open, connect to the sector with full power. I left it the time to lunch and when i came back maybe 2 hours after my mac was off, and no light on the magsafe.
Impossible to start it.
I tried the key sequence, nothing worked.
I used the magsafe of a friend who have the same model, i had i green light for 10s before it turn slowly off. and nothing worked too.
One of my neighbor on the same building, had the same problem at the same time, computer open (not a mac) and it turn off impossible to start it, he had to disconnect/reconnect the battery to solve the problem.
May it be a power surge?
Did i need to open it and disconnect the battery on the motherboard?
Thank you for your help.

A Few things to try if you haven't already:
1. Try unplugging the charger from both the wall and from your MacBook Pro. Now, make sure the powerpoint the MacBook was connected to works by plugging it in any electrical appliance you have. After unplugging the test electrical appliance and verifying that everything is OK with the electrical source, wait a minute or two and just plug the charger back into your MacBook and the powerpoint.
2. A possible problem could be a MagSafe port not working correctly. Look for any kind of debris inside the port that might prevent it from connecting the power adapter correctly to your MacBook. On the adapter, take a quick look at the DC connector for any type of debris and carefully check if any of the pins are missing, are bent, or stuck down.
3. Try a quick restart. Just press CMD CTRL ALT EJECT For about 5 seconds.
4. Try CMD, CTRL and POWER for about 5 seconds.
5. If none of this works, my last suggestion is removing the battery connecters and power supplies ect and holding the power button for a few seconds and reconnecting everything.

MacBook Pro Retina (2013) and Photoshop Elements 12 or Lightroom 5?

I have moved to a new MacBook Pro Retina (2013) from my old Windows 7 PC. As an amateur photographer which is better - Photoshop Elements 12 or Lightroom 5?

Lightroom is already optimized for the retina display and PSE12 looks superb on the Macbook pro R. You are never going to get a retina display much larger than 15 inches but once tried you would never wish to go back to other monitors. It’s not just photos; all Apple apps on the MBPr including web browsing are optimized.
Large monitors can be great if you are soft proofing images for print enlargements or for editing and rendering video where the extra real estate is useful. So it comes down to need. In general, images appear sharper on smaller displays. I upload most of my photos to my own website and Google Analytics tells me that a high proportion of my visitors are increasingly viewing on iPads, tablets and smartphones. For me that makes the MBPr ideal for my photo editing. It has far superior clarity compared with the excellent 27 inch Dell Ultra Sharp monitor on my desktop machine.
The only caveat is that nobody really knows the life of flash storage. Some say four years when writing continuously to the SSD drive and less once you start moving from unused space to overwriting. For that reason I always try to write to an external hard drive or SDXC card; reserving the SSD, as far as possible for running the applications.
I think we are getting a bit off-topic as the OP already has the MBPr and only needs to decide between PSE & LR or both.

MacBook Pro Retina 2013 15" 2.8Ghz i7 OVERHEATING

Hi,
I have MacBook Pro Retina 2013 15" 2.8Ghz i7
I use istat fan is set to max about 5500rpm. Temperature in idle ( clean reinstall just with istat menus, chrome, geekbech ) is about 80C when I try run geekbench temperature is about 105-110C so is very hot.
Thanks for advice.
If I take to Apple Store can help my there ?

Hello MarkKiss
Check out the article below about the operating temperature for your MacBook Pro. If you are still concerned, there are links within the article for further assistance.
Mac notebooks: Operating temperature
http://support.apple.com/kb/HT1778
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Macbook pro retina color profile changes when switching from integrated to discrete

Late 2013 macbook pro retina color profile changes when auto switching from integrated to discrete graphics card. Problem started after updating to 10.9.3

Same here. Really annoying because I have my screen calibrated for photo editing, which makes it much warmer than the default color profile. A lot of websites cause the graphics cards to switch for a couple of seconds, which causes the profiles to switched back and forth a few times, everytime. Really annoying, and dissapointing to see, considering Apple released like a hundred .3 betas.
You can use gfxCardStatus to make it stay on one graphics card over the other... Just remember to change it back when you're using a program that actually needs the descrete card.

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not get through at Yosemite. Can someone help me there?

Hello, I have a macbook pro retina-2013.
About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
This I can not get through at Yosemite. Can someone help me there?

They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep."

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?

They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep."

Canopus ADVC110 to 15" macbook pro retina 2013 Model

Hai All,
How can i connect Canopus ADVC110 to 15" macbook pro retina 2013 Model

Same doubt here,
Theoretically you could use a Thunderbolt to Firewire adapter from Apple.
The remaining question is: will it provide enougth energy to power the ADVC110 unit?

Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged?

Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged? or does it continue charging?In which case,is it better for the battery life to switch off the power supply or leave it on while using the macbook?

Yes, and the pilot light on the MagSafe2 connector changes from orange to green. If you unplug, you will start draining the battery again, whereas if plugged the Mac will take power from the brick and leave the battery in a charged state.

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

MacBook Pro Retina 2013 15" freezes when using safari

Similar Messages

Maybe you are looking for