MacBook USB Adaptor

Hi there,
I recently visited Apple with our macbook and the airport would not turn on etc, Apple tried a new airport card but sadly that didnt work and advised (via genius bar) we may be able to use a USB adaptor to connect to our wireless network, we are running OS X 10.5.8 and wanted to know if any what USB would be compatible?
Graeme

purchase a genuine Apple USB to ethernet adapter.
http://store.apple.com/us_smb_78313/product/MC704ZM/A/apple-usb-ethernet-adapter
problem solved

Similar Messages

Two questions 1. b/w INK ONLY for 4050 2. USB Adaptor

2 questions
1. INK for 4050 Can I ONLY load and use the black ink cart and print only b/w prints with hp 4050n ?
2. USB Adaptor What adaptor do I need IF ANY to use with my MacBook PRO ?

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Wi-fi 802.11ac USB adaptor

I bought the Edimax AC450 USB Adaptor for my Macbook Air. There is a utility installed with the adaptor, but this will not open up with Yosemite. I have been able to open it on another Macbook with Mavericks, and it worked. Same problem with other wireless utilities like Railink. I have seen how some instructions can be written in into the system to allow this. Any solutions?

Yes, apparently it is a recognized problem with Yosemite with these wireless utilities. I will check again, though. I am not that much of a geek that I change instructions in the Mac, and I just sent an email to Edimax. Thanks!

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

FireWire to USB adaptor

Hello again. I posted earlier about problems with connecting a FireWire external HD to my new MBA, which only has USB ports. I searched some but couldn't really find a FireWire to USB adaptor cable although I read that they may have them at best buy.
Has anyone purchased such a cable for Mac and, if so, could you tell me who made it and where you purchased it.
Thanks for any help.

OK, thanks. I did a lot of time researching and found some articles indicating that a couple of cable-making companies made such a thing (i.e., sima and tripp lite). Upon searching their sites and sending emails, neither of them sold such a product. I've read through my search that Apple may be eventually coming up with such a cable but who knows.
here is my issue, however, in case either of you have thoughts on this. I just posted it on the ti book forum:
hi there. I have my Itunes library downloaded on my ti book g4. I want to transfer it to the new macbook air I just purchased. How would I go about doing this? Could I just buy a usb cable and hook them up and use the ti book as an external drive or would it be more involved due to having different versions of usb (i.e., 2.0 usb on air and ? on the 7 year old ti book). The external drive I have only has firewire and I can't find a firewire-usb cable anywhere. If I could, then I'd just connect the external hd to my new mac air and do the transfer.
Any help would be appreciated.
So, maybe I've got a 'work-around' here but have questions about whether an old ti g4 powerbook and mac air could connect some way.
Any advice would be appreciated.
thank you

Recommend a wireless USB adaptor that is Mac compatible?

As I really need my MacBook to see wifi networks and not being able to wait to see if 10.5.3 fixes up the airport problems I was wondering if anyone has used and can recommend a wireless USB adaptor?
Thanks for any help
mark

I haven't used it, but it is sold by a Mac-centric vendor that I trust, OWC. If they sell it, it probably works well with Macs.
http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
http://eshop.macsales.com/item/Asus/WL167G/

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac. The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini)

ITunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

iTunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian

Not recognizing USB adaptor after Archive and Install

I recently did an Archive and Install on my PowerMac G4, but after finishing, my Belkin f5d7050 USB adaptor was no longer being recognized. I downloaded the 10.3.9 combo update from Apple using a different computer and got the file to the G4 using an ethernet cable, and made sure I had the correct driver, but to no avail. In the Network preferences, under Network Port Configurations, I see the option for "Ethernet Adaptor (en1)," but greyed out. What can I do make my machine see the adaptor again?

Could you tell me how you fixed this problem, mine is doing the same.
Many Thanks.

USB Adaptor for older char

Hi,
I have a new ZEN player. The complete AC adpator is $29.99 plus shipping. All it is, is a 5 volt charger like the one I have for my nomad 2, nomad Zen Xtra and nomad Zen touch plus an USB adaptor. Well, I have lots of the old 5 v 2.4 amp wall chargers, just looking to purchase the little?2 inch adaptor?for cheaper than $30. Does creative sell it separate? Can you give a guy a break that continues to purchase a new mp3 player from creative every couple of years? What would be cool would be to be able to buy it for about $5, so I could get 2 of them, one for home, one for work.

Creative is not known for selling parts that are a component of a product. If you have multiple chargers and are familiar with wiring, you could probably make up your own adapter using an inline jack to connect to the barrel plug from the charger, using a USB mini-B cable.

What plug adapter do I use to connect the new Macbook USB-C port to a cinema display?

What plug adapter do I use to connect the new Macbook USB-C port to a cinema display?

If you intend to connect your 2008 display to the new macbook then you will need a USB-C VGA Multiport Adapter ($79) as well as a mini display port to VGA port adapter ($29) and also a VGA-VGA Standard 15-Pin VGA Male to VGA Male Cable ($5).
http://store.apple.com/us/product/MJ1L2AM/A/usb-c-vga-multiport-adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
http://www.amazon.com/VGA-VGA-Standard-15-Pin-Male-Cable/dp/B0002AHT0M
The 2008 old cinema analogue Apple Cinema Displays were mostly pre-quipped with a mini display port rather than a VGA or HDMI port. So you will have to connect the mini display port to VGA port adapter to your 2008 ACD and the USB-C VGA Multiport Adapter to your new macbook and connect the two female VGA ports with a VGA-VGA Standard 15-Pin VGA Male to VGA Male Cable.
But I can't guarantee though that the above setup will work for your new macbook and your 2008 Apple Cinema Display. You should double check with Apple support regarding my suggestion. Just let me know.......

Mountain Lion compatible Serial-to-USB adaptor recommendation

Can someone recommend a Serial-to-USB adaptor that is compatible with OS X Mountain Lion.
Thank you in advance,
DKG

VikingOSX wrote:
Here is a link to a USB to DB9 solution.
I have used that one and it works.
Here is a similar model that I still use and it works as well:
http://www.tripplite.com/en/products/model.cfm?txtSeriesID=782&txtModelID=3915
That one has two RS-422 ports.
Their drivers for Mountain Lion work perfectly, as do the earlier ones for PPC Macs. I have used it with every OS X version since Jaguar.
It does install a kernel extension but as far as I have been able to tell, it is well-behaved and I have experienced no conflicts. The .kext is not active unless the adapter is actually connected.
Follow the driver installation instructions carefully - the adapter must be disconnected while installing the driver or the installer package will crash. The package installer dialog tells you this.
Here is a summary from my notes:
Disconnect the Keyspan adapter from your Mac. If you do not disconnect the adapter, the installer package will crash.
Open the downloaded zipfile to expand the keyspanUSAdrvr installer package.
Read the "Important Information", authenticate when necessary, and complete the installation. The Keyspan driver is a kernel extension necessary for the Keyspan adapter to work.
Connect the Keyspan adapter after the installer completes.
An alert may appear indicating that "new network interfaces were detected" and need to be configured. You may ignore this alert, and you may delete the three Keyspan network interfaces that will now appear in System Preferences > Network. OS X seems to think these are dialup modem drivers. They are not used for printing. The alert will not reappear.
A logout / login or reboot should be optional to ensure the driver is loaded. If in doubt, reboot.
With the adapter connected and its driver correctly installed, the kernel extension will now appear in System Information as KeyspanUSAdriver.
In Applications, locate and open Keyspan Serial Assistant. When the adapter has been connected its serial port names will appear in this window. Clicking the reveal triangle will show their names.
KeySerial1 is an alias to the first port on the first Keyspan adapter connected to your Mac. The names USA28XxxxxP1.1 and USA28XxxxxP2.2 will change if the adapter is connected to a different USB port. Connect your serial device to Port 1 on the adapter, and use KeySerial1 for the serial port name. Otherwise it will be necessary to change the name of your serial port every time you change which USB port the Keyspan is using.
Leave Keyspan Serial Assistant in your Applications folder since you may need it to refer to these names in the future.
To uninstall the Keyspan driver software, open Keyspan Serial Assistant, select "Uninstall USB Serial Extension" from the Settings menu, and follow the instructions. Administrator authentication is required to uninstall the driver. The extension will then be eradicated from your system. The only remaining files are the Keyspan Serial Assistant application, the installer package, and the downloaded zipfile. To completely delete everything drag all these files to the Trash.
Keyspan had previously labeled their OS X 10.8 driver a "beta" version, which worked fine. They since dropped the "beta" label. Hopefully this indicates they are interested in continued support. In any event I doubt any updates would be required for future OS X versions any time soon, since it is already a 64 bit driver.

Anyone can help me about the driver of USB adaptor CB2

Dears,
I have lost the driver of 'creative' USB adaptor, in which made my USB not work, can anyone give me the link to download the driver?, please.
beautykey

@OP: there is no content in your message, it's just begging. The title
of your topic contains two more or less informative words "PARSING codes".
My question to you is: what exactly do you mean by "PARSING" and
"codes"? Parsing context free (programming) languages? I guess
you're not talking natural languages here because your project should
just take a week to complete. Care to elaborate?
kind regards,
Jos
ps. and why "PARSING" instead of "parsing"?

[solved] Wireless USB adaptor says its something its not?

So I have a TP-Link TL-WN321G USB adaptor I just purchased. I was looking up chipset and drivers for it but when I do lsusb it comes back with
ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter
This seems strange to me as everywhere I lookup this adaptor online it says its a RT2571 or RT73 drivers, yet my computer is saying RT2070 for whatever reason?
Anyone have any ideas as to why this is or does mine somehow have a different chipset?
Thanks
Edit: Stupid enough to forget the adaptor model
Last edited by SiegeMachine (2011-01-14 07:17:20)

I got that adaptor expecting that chipset for a certain purpose but thats why I was confused when it didn't operate as expected and then when I checked I was like what the heck is this? It would appear I have a different revision using a different chipset now so I'll have to return it and look into getting another one then.

Can I use a Vodafone USB Dongle with my apple IPad 1st Generation if I have a USB adaptor for my IPad

Hi there just wondering does anyone know if I can use a Vodafone USB Dongle with my apple IPad 1st Generation 16gb (WiFi only) if I have a USB adaptor, will the IPad !st generation support a A Vodafone Dongle(Irish network)

You cannot plug a USB dongle into an iPad using the USB part of the iPad Camera Connection Kit.
The Camera Connection Kit is for connecting cameras - hence the name.
You'd need to get a MiFi device to use 3G data via WiFo on your iPad.

MacBook USB Adaptor

Similar Messages

Maybe you are looking for