Macbook wireless and Cisco base station causes kernel panics
So my company uses Macbooks and Cisco wireless base stations. For some reason, when they use bother ethernet, and the wireless, the Macbook will kernel panic for no apparent reason. So since we have a fast wired network, I have been advising those Macbook users to turn off wireless and use the wired network. Wouldn't you know, the kernel panics go away. Is anyone aware of an issue with the wireless chipset in the Macbooks and the wireless chipsets in the Ciscos not liking to play with one another? I know it's the wireless in the Macbooks as if I use any other wireless base station from Apple or Linksys, the issue is not there. I should also mention that when people use those Macbooks on the wireless every once in a while, they get an access control list error. We do not have ACLs for our wireless. Our PowerBooks and iBooks do not exhibit any of these issues on the same network, so we know it is an issue with Intel based Macs. Any ideas?
I'm having a similar problem at college (they use Cisco equipment). On most of the campus everything is fine, but in the area near my classes (typically), wireless causes the mac to panic.
I asked at IT, and came back more confused (apparently, they use the same model WAPs throughout the college, so they couldn't see why one particular WAP would cause this. They guessed it was to do with the huge amount of traffic that particular WAP gets, with it being in the Computing department and all).
Similar Messages
-
Recent Time Machine and Airport Leopard update causes Kernel panic
I had 15 iMac's in a classroom that were all updated to the new Leopard update for Time Machine and Airport. When they restarted, they all gave a kernel panic error. Successive restarts continue with the screen starting with the kernel panic error message and asking for a shutdown.
I am extremely sure that it had to be those updates because they were all fine before that. I doubt 30 pieces of RAM could have gone kaput all at once. Since we have a dual boot setup, if I press the alt key when I restart, I can boot into the Windows side without any problems.
If somebody has had a similar problem and found a way to do something about the kernel error, please let me know. Thanks in advance. I did the usual zapping RAM and stuff. It didn't help.More information - from the crash report:
Tue Mar 25 11:23:14 2008
panic(cpu 6 caller 0x001A8C8A): Kernel trap at 0x004095b9, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x00d7b000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x0bb2c200, ECX: 0x00000000, EDX: 0x0c0915a0
CR2: 0x00000018, EBP: 0x82ffbcc8, ESI: 0x0c09de00, EDI: 0x0c09bfa0
EFL: 0x00010206, EIP: 0x004095b9, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x82ffbad8 : 0x12b0f7 (0x4581f4 0x82ffbb0c 0x133230 0x0)
0x82ffbb28 : 0x1a8c8a (0x461720 0x4095b9 0xe 0x460ed0)
0x82ffbc08 : 0x19ece5 (0x82ffbc20 0x1 0x82ffbcc8 0x4095b9)
0x82ffbc18 : 0x4095b9 (0xe 0x10048 0xbbb0010 0x3e0010)
0x82ffbcc8 : 0x40960c (0xc09de00 0xbbdf900 0x1 0xc09de00)
0x82ffbce8 : 0x40d648 (0xc09de00 0xc09dd00 0x0 0x3ea76c)
0x82ffbd38 : 0x40d7fb (0xc09dd00 0x4 0x0 0xb6dde00)
0x82ffbd58 : 0x84047d77 (0xc09dd00 0xc09dd00 0xbda3760 0x11a1d4)
0x82ffbdc8 : 0x8404bf21 (0xbb2c200 0x82ffbdfc 0x82ffbdf8 0xbb2c200)
0x82ffbe08 : 0x8404c236 (0xbb2c200 0x0 0x0 0xbb2c200)
0x82ffbe28 : 0x8404c2ba (0xbb2c200 0x840555a0 0x0 0x0)
0x82ffbe48 : 0x40fd82 (0xbb2c200 0xbbdf900 0x1 0x3ea740)
0x82ffbea8 : 0x411c17 (0xbbdf900 0xbb2c200 0xbbead40 0xbb46300)
0x82ffbf28 : 0x41147b (0xbbdf900 0xbbb66c0 0x0 0xffffffff)
0x82ffbf78 : 0x4100f7 (0xbbdf900 0x0 0x82ffbfac 0x1)
0x82ffbfc8 : 0x19eadc (0xbbddb40 0x0 0x1a20b5 0xb9445d0)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.faronics.driver.DFXDriver(4.0.1f23)@0x84046000->0x8405afff
dependency: com.apple.iokit.IOUSBFamily(3.0.8)@0x83483000
dependency: com.apple.iokit.IOStorageFamily(1.5.2)@0x8375f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9C7010
Kernel version:
Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
System model name: MacPro2,1 (Mac-F4208DA9) -
Hi all,
I've got an rt3062 chipset wireless card and it's been causing kernel panics ever since the upgrade to linux-3.0.
I was using the driver and firmware supplied by ralink and compiling it as the rt3562sta driver and it used to work great but it doesnt seem to support anything higher than kernel 2.6.39.
I'm not exactly sure which error logs to post, so...
Anybody else having this issue? and maybe find a workaround?
ThanksI am using the same combination, successfully, with kernel 3.0.7-1. I do not recall having to do anything special to get it to work.
06:00.0 Network controller: Ralink corp. Device 3062
Subsystem: Ralink corp. Device 3062
Flags: bus master, slow devsel, latency 32, IRQ 19
Memory at fbdf0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Kernel driver in use: rt2860
Kernel modules: rt3562sta, rt2800pci
Tim -
RAID mirror with software utility caused kernel panic every time
Using disc utility to make a mirror of 2 drives, click create and i get kernel panic and have to power off machine. if i try to start the machine with either of the two disks in it (together or individually) i get same kernel panic and have to power off.
The disks are in an external storage array (sonnet d500). I have a second storage array with raided disks in and i have raided disk inside the mac too. these all work fine..
originally 2 weeks ago i had the 2 disks working in a group of 4 disks set as a mirror of 2 striped disks. One disk in this setup failed and with this config you can never 'recover'or rebuild it - you get a degraded mirror and you can backup the data, but you must completely rebuild the raid again as the mirror of stripes never lets you add a new disk in again.period. not good.
I replaced the failed disk and rebuilt the mirror of stripes. this lasted a day until a second disk failed (all 4 were bought at same time so i was kind of expecting that to happen once one failed).
i replaced the second faulty hdd and thought about my disk usage and decided i would not make another mirror of stripes and i would make 2 mirrors instead for safe-ish storage and then transfer data to a striped raid set for editing from instead of direct from the mirror of stripes volume.
i tried to delete the raid but got a kernel panic
if i started the machine with any of the 4 disks i would get a kernel panic.
i moved the disks one by one into an older G5 running Tiger and managed to erase the raid info on 2 of them. The two new ones had some strange raid info and the Tiger machien thought there was an extra disk in the machine and would not erase or partition or allow me to destroy the raid whatever i tried.
I will be moving these now into an old XP PC to try to erase the boot records etc and erase them to be able to use them again in either mac pro or G5. painful..
so.. i ended up with 2 erased drives and have 2 new drives with dodgy raid info that causes kernel panics on the leopard machine and wont go in the Tiger machine.
The two erased drives are what ive now been trying to use in the mac pro to create a mirror - this now caused kernel panics when creating the mirror to start with and when installed in the machine at all. so i will be erasing them again in the tiger machine soon (its busy erasing with zeros another new disk that i added to the Tiger machine 2 weeks ago which seems to have some fault when raided!!! but thats another story).
so.. is anyone else having problems with creating basic mirror in 10.5.4 or is it just me??
i have a sonnet tempo e4p card with 2 external sata disk enclosures, latest firmware for the e4p card. all other previously existing raid volumes are working fine. i have one set of 2 striped disks, one set of 3 striped disks and one set of 2 stripes which are mirrored - all happy and working fine. but i cant make a new mirror of 2 disks...
I phoned Apple support and they said all raid info was kept on the disk itself and nothing on the actual machine and suggested i take the machine to an apple care centre for some tlc (although its disk i am having a problem with). since all my other disk arrays work fine i don't really want to rebuild the whole machine from scratch if i can avoid it.
Any suggestions of what i can try ??well it turns out the new disk i bought just werent any good. my g5 powermac raid mirror issue was related to one new disk with lots of bad blocks (speed tools showed that up) so i have learnt my lesson on cheap non raid disks for raid..
am waiting on a couple of new ultrastar enterprise disks to tuen up so i can go back to the macpro and try to add a mirror again.
i am still stuck wih several new disks that i cannot format now in the macpro on leopard or on the g5 powermac with tiger.
ive tried softraid and that cant do it, speedtools pcformat util cant do it, disk utility crashes when i try to eras them and diskutil from termianl starts then doenst get anywhere and my pc sata card doesnt work so my last resort pc option still doesnt help me clear the partition map on these drives - ones that diskutility on leopard made for me - and drives which still cause kernel panics on the macpro if i put them in it..
here is what diskutil says on my g5:
/dev/disk0
#: type name size identifier
0: GUIDpartitionscheme *465.8 GB disk0
1: EFI 200.0 MB disk0s1
2: Apple_RAID 465.4 GB disk0s2
3: Apple_Boot 128.0 MB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk1
1: Applepartitionmap 31.5 KB disk1s1
2: Apple_HFS Macintosh HD 233.6 GB disk1s3
/dev/disk2
#: type name size identifier
0: *465.4 GB disk2
/dev/disk3
#: type name size identifier
0: Applepartitionscheme *931.5 GB disk3
1: Applepartitionmap 31.5 KB disk3s1
2: Apple_HFS backup1T 931.4 GB disk3s3
/dev/disk4
#: type name size identifier
0: Applepartitionscheme *931.5 GB disk4
1: Applepartitionmap 31.5 KB disk4s1
2: Apple_HFS tempi 931.4 GB disk4s3
disk0 is the one with the bad partition info.
it thinks it has a double raid as the console shows on startup:
(both store45 and cache it thinks are on this disk - cache was my old mirror of stripes set on other machine, store45 was new name for my mirror, so seems like it hadnt deleted the original raid partition info before making new info which now kernel panics)
Jul 18 18:48:05 localhost kernel[0]: AppleRAID::degradeSet - starting the set "STORE45" (B9C48619-6B2C-4547-A01E-4864754EA7E2).
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::degradeSet - starting the set "CACHE" (64F914A5-5556-4A44-AEE2-DC437868766B).
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002c2 detected for set "STORE45" (C0E139A4-2A6D-49C6-8F77-202AF7F9285D), member 50207BE5-E487-410E-8E8E-C4C4DCD2687B, set byte offset = 999527018496.
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002c2 detected for set "CACHE" (64F914A5-5556-4A44-AEE2-DC437868766B), member C0E139A4-2A6D-49C6-8F77-202AF7F9285D, set byte offset = 999527018496.
so currently i have 2 new 500gb disks which cant be partitioned back to anything at all on either machine. looks like i will have to buy a new pc to reformat them..
any suggestions of how to clear the partition map info and get them back to freespace ?? -
Where has my airport utility window gone? When I double click on the airport utility icon all I get is a picture of a globe and a base station with no further options available to modify my airport extreme.
Sorry, you lost me on that last post.
Let's start over again.
Open AirPort Utility on your Mac
Are you asked for a password at this point? If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
You need that password to be able to access the settings for the AirPort router in AirPort Utility.
If you see a window listing basic information, click Edit in the upper right corner of the window.
If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
If you forgot the password, a Soft Reset will allow you to go in and reset the base station password. Might be a good idea to write down that password.
If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button. -
IMac 27" with Wireless G network causes Kernel Panics
I bought a 27" iMac Jan 8th 2010
At home i'm running a Wireless G network through a linksys WRT54G V7.0 router
From day one i was running into Kermnel Panics several times a day
When i was provided a new machine the same thing happened
The machine has been away for repair for 2 weeks and nothing was found.
As soon as the machine was back home the Kernel Panics started again
A clean install has ben done, and when setting up the network for the build in airport, the machine died again in a kernel panic
After further discussions with apple repair they stated the the Kernel Panics were caused by the Wireless G network, and was advised to get myself a wireless N router
I got myself a wirelees N router (apple airport extreme), and no more Kernel Panics were seen
Now the questions are :
Did anybody else ran into this issue ?
Is somebody have this same issue and also have a linksys router ?
Would anybody be able to explain why my Linksys WRT54g V7.0 router running Wireless G cuase the Kernel Panics on my machine ?
Ok quite a story, but hope to get some constructive answers.
thnx
PaulI took home a 27" i5 iMac on 7th of Mar 2010 and immediately two days later i had my first kernel panic.
When i called Apple Support the next day i was led through a barrage of file deleting and the usual Disk Utilities Repair Disk actions. Two days later another kernel panic happened but this time the computer display remained blank. I brought it back to the department store where i purchased it and, they agreed to replace my unit (still within the store's seven days warranty).
Five days later my new unit arrives and the moment i turned on the wireless connectivity i had another kernel panic. I was ****** - NOT looking forward to carrying the 38lb computer back to the store again. Called Apple again and the guy had me reinstall OSX. One day later kernel panics still there.
Then i experimented by not turning on the wireless internet, for two days no kernel panics. The moment i did, a kernel panic would occurs, i got suspicious. That's when i stumbled on luupski's post (I'm real glad i found it). I also was using a linksys WRT54G router and getting the same kernel panics as everyone on this thread. Now that the root cause has been identified, i decided to save my SGD258 (apple airport express) and instead invested SGD18 in a Cat5e 20m ethernet cable. My mac now works perfectly apart from the lack of wireless network, which i can grudgingly bear.
Real glad to see genuine and useful posts in a forum like this. I will be giving a heads up to the Apple support guys, they seem to be totally oblivious about this issue. Its weird since the WRT54G seems to be quite popular here in Singapore.
Thanks,
simon -
Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?
Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton -
Unable to set up my Time capsule as router and wifi base station
I am new to the mac world and purchased a time capsule to act as my router and wifi base station. I asked when i purchased the TC if i needed anything other than the adsl filter i have for broadband and was told no. However I cannot get the TC to talk to the internet or even see the connection. Did i infact need a modem between the adsl filter and the tc? if not what cable do i need from the adsl filter and the tc as the one that fits my current router and works has a small modem jac not an ethernet jack?
Finally got sensible help desk person who answered my query and I did need a modem
-
I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?
I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
FireFox Web browser will not run
I get issues with the computer running very slowly
I have already turned off the transparency option in settings. Any ideas??
Cheers
Matt
MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with YosemiteDo you have more than one OS on the Mac?
You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
A SMC Reset or PRAM/NVRAM reset may also help.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Startup key combinations for Intel-based Macs - Apple Support -
Airport causing kernel panics and kp in safe boot.
Last week I got my first kernel panic in years. It happened while I was asleep and checking an extrenal drive for bad blocks with TechTool. It turns out that the drive indeed had bad blocks and found that the cpu was shut down when I awoke. I started up the computer and it wasn't able to stay on for more than 10 min max before the next kernel panic. I checked here for more advice on kernel panics and started to try to narrow the number of culprits. Everything was unplugged and still kp. Instaled a new drive with a week older system from Time Machine and still kp. Reset NVRAM and replaced pyhsical RAM and still kp. Removed the Airport Extreme card and still kp. Booted into Safe Mode after all of the previously mentioned and still kp. I'm now going to take the drive and swap it into another body that I have to see if the root is actually on the drive on the physical hardware of the cpu.
I was interested in this thread and read all of the links that jpl posted. Airport causing Kernel Panic (?) Jason then replied that it had been solved due to a "permissions problem" I wish he gave more info on what exactly he did to resolve the problem as it's been almost a week now without any work being done for me.
I've also noticed this very strange behavior that might shed some light onto the issue. When I open System Prefs and close the window there is a strange colored pattern that will always flash after the window has been closed. I tried to post it to my me page but for somereason it wouldn't play for me so there's that and the YouTube version too.
https://www.me.com/gallery/#100008/Prefs%20Screen
http://www.youtube.com/watch?v=2zrTt88YdBo
In addition when the computer has started up and the system loads. Checking Activity Monitor shows that there are 50 or more threads active for the the kernel_task. Inspecting this doesn't seem to show any useful information.
Finally here are a few of the recent crashes I hope that someone might be able to shed some light on this extremely frustrating problem for me.
Tue Oct 25 18:54:16 2011
panic(cpu 0 caller 0x000AE584): "Uncorrectable machine check: pc = 00000000000A388C, msr = 0000000000141000, dsisr = 42000000, dar = 0000000000272008\n" " AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000\n" " L2FIR = 0000000000000000, BusFir = 0000000080000000\n"@/SourceCache/xnu/xnu-1228/osfmk/ppc/trap.c:975
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AE584 0x000AE804 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2fc12c80)
PC=0x000A388C; MSR=0x00141000; DAR=0x00272008; DSISR=0x42000000; LR=0x000A37C8; R1=0x2E947B40; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00000000 0x000A09C8 0x0009E2EC 0x0006B3C0 0x0006C728 0x0003BE1C
0x0029361C 0x0029364C 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x249dba00)
PC=0x9195435C; MSR=0x0000F030; DAR=0x00272000; DSISR=0x42000000; LR=0x00001FA8; R1=0xBFFFFB00; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: PubSubAgent
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Tue Oct 25 19:09:54 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 15:31:02 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 22:17:42 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000010 PC=0x0000000000082EF8
Latest crash info for cpu 0:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thu Oct 27 11:28:35 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000004 PC=0x00000000000848E0
Latest crash info for cpu 0:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thanks in advance,
MaxMy vision is pretty poor, still cant see it, but...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process. -
my hp6600 printer is connected to my wireless which is provided by my TimeCapsule. my Windows7 prints fine wirelessly. however my MACBooks do not print wirelessly. I can scan from HP6600 to MACBook wirelessly and if I print the queue looks ok but no print comes out.
can anyone assist pls!It sounds like the windows computer has captured the printer..
I suggest you turn the windows computer off.. reboot the rest of the network and see if the Mac can then print.. if not, remove the printer setup in the Mac and redo it.
Remember the TC has absolutely nothing to do with this.. TC is merely a wireless router.
This is windows and Mac interferring with each other. -
Mounting Time Machine causing kernel panic!
Hello,
I Am getting kernel panic when i mount time machine in finder , the screen freez and my trackpad for few seconds then kernel panic. i did a clean install for 10.9.2 and still i get this kernel panic.
Regards.
Sat Mar 29 10:15:41 2014
panic(cpu 0 caller 0xffffff8024cdc6b9): "Double fault at 0xffffff8024c524b3, registers:\n" "CR0: 0x000000008001003b, CR2: 0xffffff8117477fd8, CR3: 0x0000000053f580c9, CR4: 0x00000000000606e0\n" "RAX: 0xffffff804e38ac00, RBX: 0xffffff8028308120, RCX: 0xffffff8025181dd8, RDX: 0xffffff8028308178\n" "RSP: 0xffffff8117477fe0, RBP: 0xffffff8117478030, RSI: 0x0000000000000001, RDI: 0xffffff8028308120\n" "R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x00000000f50229df, R11: 0x0000000024c470a7\n" "R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0xffffff804e38afd8, R15: 0x0000000000000000\n" "RFL: 0x0000000000010287, RIP: 0xffffff8024c524b3, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.90.20/osfmk/i386/trap_native.c: 168
Backtrace (CPU 0), Frame : Return Address
0xffffff8107b6bce0 : 0xffffff8024c22fa9
0xffffff8107b6bd60 : 0xffffff8024cdc6b9
0xffffff8107b6bec0 : 0xffffff8024cf3bef
0xffffff8117478030 : 0xffffff8024c51df9
0xffffff8117478130 : 0xffffff8024c2aa6f
0xffffff8117478160 : 0xffffff8024c2b179
0xffffff8117478190 : 0xffffff7fa530071e
0xffffff81174781d0 : 0xffffff7fa5300622
0xffffff8117478aa0 : 0xffffff7fa52ff18e
0xffffff8117478f60 : 0xffffff7fa52feae1
0xffffff8117478fb0 : 0xffffff7fa52fd606
0xffffff8117479160 : 0xffffff7fa5302772
0xffffff8117479320 : 0xffffff8025031f59
0xffffff8117479380 : 0xffffff8025014491
0xffffff8117479470 : 0xffffff802503022b
0xffffff8117479520 : 0xffffff7fa73ed14f
0xffffff81174795c0 : 0xffffff7fa73ec10b
0xffffff8117479690 : 0xffffff80250144e8
0xffffff8117479780 : 0xffffff802503022b
0xffffff8117479830 : 0xffffff7fa7412a55
0xffffff8117479940 : 0xffffff7fa7412ff2
0xffffff81174799b0 : 0xffffff7fa7413a70
0xffffff8117479a40 : 0xffffff7fa7423ad2
0xffffff8117479b30 : 0xffffff7fa740ca84
0xffffff8117479bd0 : 0xffffff7fa740e91f
0xffffff8117479c60 : 0xffffff8024e001c6
0xffffff8117479cb0 : 0xffffff8024dccaa9
0xffffff8117479df0 : 0xffffff8024dd1217
0xffffff8117479f90 : 0xffffff8024dd0715
0xffffff811747a250 : 0xffffff7fa740d630
0xffffff811747a2e0 : 0xffffff8024dfd9b1
0xffffff811747a360 : 0xffffff8024df4ce9
0xffffff811747a410 : 0xffffff8024df4bb4
0xffffff811747a450 : 0xffffff7fa73d10a2
0xffffff811747a4b0 : 0xffffff7fa73d0231
0xffffff811747b660 : 0xffffff8024fb3a41
0xffffff811747b6c0 : 0xffffff8024ddfccd
0xffffff811747b710 : 0xffffff8024df4850
0xffffff811747b7b0 : 0xffffff8024de63d5
0xffffff811747b860 : 0xffffff8024fbe563
0xffffff811747bf50 : 0xffffff802503e363
0xffffff811747bfb0 : 0xffffff8024cf3b26
Kernel Extensions in backtrace:
at.obdev.nke.LittleSnitch(4052.0)[BF438D55-0C86-3EE5-B254-7FDF97CFE8A0]@0xfffff f7fa52fc000->0xffffff7fa5341fff
com.apple.nke.asp-tcp(8.0.1)[4158E96F-9D53-3BF9-8F75-674C1475EC8F]@0xffffff7fa7 3e8000->0xffffff7fa73f4fff
com.apple.filesystems.afpfs(11.1)[BD701679-9DF1-3F30-9AF1-526277C33E87]@0xfffff f7fa7406000->0xffffff7fa7454fff
dependency: com.apple.security.SecureRemotePassword(1.0)[BC0BAB92-C8C9-3959-AA42-272AF578DF D9]@0xffffff7fa73f5000
BSD process name corresponding to current thread: diskimages-helpe
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000024a00000
Kernel text base: 0xffffff8024c00000
System model name: Macmini5,2 (Mac-4BC72D62AD45599E)
System uptime in nanoseconds: 38549836510703
last loaded kext at 3663243180615: com.apple.driver.AppleUSBAudio 2.9.5f4 (addr 0xffffff7fa7455000, size 303104)
loaded kexts:
foo.tun 1.0
foo.tap 1.0
com.avast.AvastFileShield 2.1.0
com.avast.PacketForwarder 1.4
at.obdev.nke.LittleSnitch 4052
com.apple.filesystems.afpfs 11.1
com.apple.nke.asp-tcp 8.0.1
com.apple.driver.AppleUSBCDC 4.2.1b5
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.15
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.iokit.IOBluetoothUSBDFU 4.2.3f10
com.apple.kext.AMDFramebuffer 1.2.0
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.ApplePolicyControl 3.4.35
com.apple.driver.AppleIntelMCEReporter 104
com.apple.AMDRadeonX3000 1.2.0
com.apple.kext.AMD6000Controller 1.2.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.4.35
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleIRController 325.7
com.apple.driver.CoreStorageFsck 380
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSDXC 1.5.2
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.AppleUSBAudio 2.9.5f4
com.apple.security.SecureRemotePassword 1.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.IOBluetoothHIDDriver 4.2.3f10
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOAcceleratorFamily 98.14
com.apple.kext.AMDSupport 1.2.0
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.CoreStorage 380
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Hardware Information:
Mac mini (Mid 2011)
Mac mini - model: Macmini5,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
AMD Radeon HD 6630M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:41
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 499.25 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Plantronics Wireless Audio Plantronics Wireless Audio
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
at.obdev.nke.LittleSnitch (4052 - SDK 10.8)
com.avast.PacketForwarder (1.4 - SDK 10.9)
com.avast.AvastFileShield (2.1.0 - SDK 10.9)
foo.tap (1.0)
foo.tun (1.0)
Launch Daemons:
[System] at.obdev.littlesnitchd.plist 3rd-Party support link
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.avast.init.plist 3rd-Party support link
[System] com.avast.uninstall.plist 3rd-Party support link
[System] com.bjango.istatmenusdaemon.plist 3rd-Party support link
[System] com.cleverfiles.cfbackd.plist 3rd-Party support link
[System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
[System] com.maintain.AutoLoginUserScreenLocked.plist 3rd-Party support link
[System] com.maintain.CocktailScheduler.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] vyprvpnservice.plist 3rd-Party support link
Launch Agents:
[System] at.obdev.LittleSnitchUIAgent.plist 3rd-Party support link
[System] com.avast.userinit.plist 3rd-Party support link
[System] com.bjango.istatmenusagent.plist 3rd-Party support link
[System] com.maintain.LogOut.plist 3rd-Party support link
[System] com.maintain.Restart.plist 3rd-Party support link
[System] com.maintain.ShutDown.plist 3rd-Party support link
[System] com.maintain.Sleep.plist 3rd-Party support link
[System] com.maintain.SystemEvents.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.avast.home.userinit.plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
[not loaded] org.xbmc.helper.plist 3rd-Party support link
User Login Items:
iTunesHelper
SmartDaemon
PopClip
iCleanMemory
SABnzbd+
SickBeard
Knock
HazelHelper
iBetterCharge
VyprVPN
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Safari Extensions:
1Password: Version: 4.1.0
NoMoreiTunes: Version: 2.3.1
avast! Online Security: Version: 8
AdBlock: Version: 2.6.18
Folx: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Folx3Plugin: Version: 3.0.1 - SDK 10.6 3rd-Party support link
3rd Party Preference Panes:
avast! Preferences 3rd-Party support link
Flash Player 3rd-Party support link
FUSE for OS X (OSXFUSE) 3rd-Party support link
Hazel 3rd-Party support link
Java 3rd-Party support link
Perian 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
3% SystemUIServer
2% EtreCheck
0% Little Snitch Network Monitor
0% Little Snitch Agent
Top Processes by Memory:
295 MB Safari
123 MB com.apple.IconServicesAgent
121 MB com.apple.WebKit.WebContent
98 MB SickBeard
98 MB mds_stores
Virtual Memory Information:
3.78 GB Free RAM
2.38 GB Active RAM
810 MB Inactive RAM
1.05 GB Wired RAM
1.45 GB Page-ins
0 B Page-outsThe panic was apparently caused by "LittleSnitch," maybe with help from one or more of the other third-party system modifications you've installed. I suggest you remove it and also "Avast."
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.
"Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. Not only does it fail to protect you from any real danger, it throws false warnings, destabilizes and slows down your computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage, and neither will Disk Utility or even reinstalling OS X.
Back up all data, then remove "Avast" according to the developer's instructions. Restart.
If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and then follow the instructions linked above. -
Could Safari cause kernel panic?
I've had two kernel panics in two days, and both times I had Final Cut Pro running with Safari. The cause seems to be bad RAM ('Uncorrectable Fbd memory error detected' was in the log) but its an odd coincidence. FCP has been really stable and is a fresh install, but my Safari settings were migrated over from my G4 and it has about 4 years of bloated settings and bookmarks (it's nowhere near as snappy as the Safari in my clean account).
Even though it's probably bad RAM, could Safari be the culprit in actually setting off the kernel panic? Like a sharp spike in memory usage from opening a new page actually triggers it (like when Bill Bixby gets angry)?
JK
Mpro 2.66, G4 Dual 1g, 15" Powerbook 2.66, 3g iPod Mac OS X (10.4.8)One way of confirming bad RAM is to run the Apple Hardware Test from your Tiger Installer DVD. When you start-up from the DVD, you hold down the option key. Eventually, the Hardware Test icon appears. Select it. When fully loaded, select the "quick test". This will test the various components of your system, including the RAM.
I have doubts about Safari causing the kernel panics. Have you seen this Apple Knowledge Base article about Kernel Panics?
One way to speed up Safari, especially since you carried it over from another system, is to trash the Icon folder in your User Account>Library>Safari folder. This holds the site icons. Trashing it will reset the file. Initially, the small icons appearing in the address bar will revert to a blue dot. Over time, the favicons will start to appear as you visit various sites.
Another way to speed up Safari is to select "empty cache" in the Safari Menu.
Post back after you run the hardware test. -
Battery Update Causing Kernel Panics?
It seems that ever since I installed the Battery Update it's been causing Kernel Panics on my MBP. Three since yesterday in fact. Has anyone else been experiencing this?
MacBook Pro 1.83 GHz Mac OS X (10.4.9) 1 GB RAM, 80 GB HDD, ATI Radeon X1600Hmm I have seen multiple posts on the computer not booting the OS (gets to the grey apple with spinning gear screen) but so far I think you are the first I have seen reporting kernel panics.
Can you boot to the install cd? I'd try running the disk utility from the install disk and verify/repair permissions and verify the disk as well. (repair disk if verification fails)
Here is an article that may help ya:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214 -
Using 2 memory modules causes kernel panic
In early 2009 I upgraded my memory from 512 to 2 GB, 2 modules of 1GB each. This past January (just shy of 2 years later) I got a kernel panic. I tested running with a single module, and one module caused panic, the other was fine. Both slots function with the good module. So I got two new matched replacement chips from OWC, put them in and got kernel panics during the boot process. Yesterday I spent testing memory configurations and found this:
1. chip 1 alone runs fine and passes all Rember memory tests in slot 1.
2. chip 2 alone runs fine in slot 1 and 2, passes all memory tests in slot 2.
3. chips 1 and 2 together, in either slot, cause kernel panics before the OS is loaded.
Has anyone seen this problem? Will it go away if I use top of the line (Apple) memory chips?
When the kernel panics started back in January, an AppleCare advanced advisor said he had the same problem and he had to remove one module to stop the kernel panics. Running on 1GB doesn't work for me because I tend to max out the memory and programs like Mail, Safari, Photoshop, etc. become unreponsive all together.
thanks -I have spent more time on the phone with OWC about this than I care to remember. Their latest request is that I use an eraser to clean the metal contacts on the chips; if that fails, I get to send the chips back. Whether I get a refund or yet another set of replacement chips, I don't know. They are not experts on Apple machines, that is clear.
Maybe you are looking for
-
Ok here are my system specs: -Hardware- Motherboard: MSI 875P NEO-FISR 2.0 RAM: Kingston KVR400X64C3AK2/2G 2GB Kit 400MHz DDR PC3200 DIMM 3-3-3 Standard 128M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Gold) CPU: Intel Pentium
-
Hi, Could someone help me with my problem: I have a site that I made using a Business Catalyst template called Adora, and there is a slidehow called AnythingSlider. The slider has a Swing effect that swings pictures and I would like to change that i
-
Hi, There s a std transaction F.27(RFKORK00) which we need to run to get Customer Statement. in this program, it uses a SUBMIT ( SAP140 ) which in turn uses a submit ( RFKORD11 ). i m using a customised program in place of RFKORD11. in this program i
-
Iphone not removing reoccuring Outlook Calender events! ARGH
Help. I've been syncing my iphone with my Outlook 2003 calendar all the time for months. I had a couple of re-occuring events that happened every week, those events have since expired, but the iphone g3 still thinks they are there and beeps at the ev
-
Measurement of the dynamic pressure by IEPE sensor
Hello, I work on cylinder pressure measurement in combustion engine. I have a piezoelectric pressure sensor with charge output 1 pC/psi and an inline charge amplifier 20 mV/pC what gives overall sensitivity 20 mV/psi. As my instrumenst are of an IEPE