Mail is not sticking with original sending address for replies

Hi,
Using Mac OS 10.10.1 I have several mail accounts but only two appear to be problematic. I have my default set to my work address, which uses the Office 365 service. Newly composed emails should be in that but are not always. I also have a me.com address that is not he default. Quite often, when I need to reply to all for a message originally sent to my work account, the address from field changes from the original address I received on to the me.com address. It's only between these two address. I have gmail and yahoo addresses as well that never are involved in this switch.

This isn't happening on "Save" after all just "Add to iPhoto".  Have tried repaired permissions and reinstalled Lion but it's still happening.
I was also wondering if this was happening with anyone else (perhaps a software update glitch). I am running OS X 10.7.2 and the Operating System is Lion.
Thanks

Similar Messages

  • Send mail with no sender address using Javamail

    I'm trying to send emails using javamail, it works fine but I would like to send emails with no sender address. When I don't set :
    message.setFrom(new InternetAddress("[email protected]"));
    or do just
    message.setFrom()
    I get my_user_name@my_machine_name as the sender address when i recieve the email.
    I understand the security problems about sending emails without sender but i need to automate the sending of confirmation messages that recievers can't answer to.
    Quentin.

    I get a lot of e-mail newsletters that say at the bottom "Please do not reply to this, nobody will read your reply". What's wrong with that? Set up an address and automatically purge any messages sent to it on a regular basis.
    Or if you want a different way to annoy people, use an address that doesn't exist on your server. Then people get a bounce message when they reply to it.
    You might also want to evaluate commonly-used spam filters and see if they filter out messages that don't have from-addresses. No point sending people messages if they get filtered out.

  • Mail and notes request an icloud email address

    Although I have set up an iCloud account a while ago I have yet not been using it.
    After installing OS X 10.8.2 and IOS 6 on my MBA and iDevices I decided to have a look at iCloud.
    I logged on iCloud .com and accessed to the main window. All but Mail and Notes were working.
    Those two are asking me to provide an iCloud.com valid email address.
    I do have a "me.com" email account, but it does not take it as it forces an icloud.com extension.
    If I try to create an icloud address it refuses it as it says it's already being used.
    I really do not understand the problem I am facing.
    Can someone tell me what I am doing wrong, and help me have iCloud up and running.
    Thanks In advance

    Thank you for your help.
    I start to understand the issue. My iCloud account is [email protected]
    I did what you suggested and logged into iCloud with my "me.com" email adress. And Mail and Notes did launch. The issue is that I do not use this account in my everyday work.
    Does that mean that iCloud Mail and Notes request an 'me.com' address to work. That seemms strange and confusing since the other services do accept the 'orange.fr' address.
    Is there a workaround? I should not be the only one using iCloud with my Internet provider address.
    Looking forward to reading your suggestions.
    Thanks

  • After installing Mavericks on my iMac, Apple Mail would not sync with my Google Apps email account.  Now Mail crashes every time I open it.  What's up?

    After installing Mavericks on an imac, Mail would not sync with my Google Apps email account.  After I clicked on All Mail the program crashed and now it crashes every time I open Mail.  Does anyone have an suggestions?

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

  • When trying to but in app purchases I get an error that says "iTunes password and account is not synced with the email address"!  How can I fix this?

    I try and buy in app purchases but it won't let me and gives me the above error message: "iTunes password and account is not synced with the email address"!  How can I fix this?

    Are you running modified software on your phone?  This error seems to be common if the firmware has been modified and you're trying to restore the phone again. 

  • Data collection task in Update mode is not posible with Original list

    Hi Friends,
    When I try to Execute the Task for data collection in sa38.I am getting the Error with in 9 sec.
    UPDATE MODE IS NO POSSIBLE WITH ORIGINAL LIST
    Message No. UCS0111
    Diagnosis :
    If you select the indicator"original list"the current task status is ignored.In this case,the system simulates a task run in with all of the organisational units are not yet blocked.Thus,setting this indicator is meaningful and valid only if the task is executed in test mode at tthe same time.
    procedure : select the original list & Test run together.
    My problem is I can not select the Test run in production  server.
    Can any one please help me to solve the Issue.

    I Thank you all for Responding to me.
    Hi Dan,
    SA38 provides all the needed parameters- Con.Group,Company,Version,Fis.Year,Period,Group currency.
    Iam trying to run the task with SA38 for Data Collection.
    Hi Lucio,
    When I Check the Fields Both the  Log & Original list . The programe gives an error message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
    Even when I tried with Log,Test Run & Original List Iam getting the Same error Message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
    I can run the task Successfully with selecting the Log option only. But my Client need  to Use both Log & Original list ( as they used to run in BIW 3.5 ) Now it we are using BI 7.
    Hi Christopher,
    We are running the programe UCBATCH01,with the T code SA38.
    Hi Eugene,
    I will look in to the link and i will Discuss with the Basis team.
    Once again Thank you all for responding
    Suraj.

  • ITunes will not sync with Yahoo! Address Book

    ITunew will not sync with Yahoo! Address Book, states something about ID or password being incorrect

    i had problems wit my yahoo contact sync too, i used gmail and it worked perfectly. do u have a proxy running?

  • Messaging Server 4.1: Received mail is not returned to the sender if the receiving local account does not exist.

    I have found that received mail is not returned to the sender if the receiving
    local account does not exist. This problem occurs even if I use Console to
    enable the Return message to sender option under the error handling methods.
    In addition, I have used the configutil
    to confirm that I have set the value
    for Unknown account action to "13," which corresponds to the settings "Return
    message to sender," "Notify the postmaster via email," and "Log the error in
    the log file." Yet, in this situation, an error message is being sent to
    postmaster, but not to the sender, and the error is not being recorded in the
    log file.
    <P>
    Do the following steps:<BR>
    <P>
    <OL>
    <LI>From Console, open the appropriate Messaging Server.
    <LI>Click the Configuration tab.
    <LI>Open the Services folder.
    <LI>Select SMTP.
    <LI>Click the System tab.
    </OL>
    <P>
    Check the "Domain handled by this server exclusively" field to make sure that
    your mail domain is listed. If your mail domain is not listed, then Messaging
    Server will assume that there is another mail server that is handling the
    domain listed and will forward requests to this server.
    <P>
    For more information, please see the document <I>Messaging Server
    Administrator's Guide</I>, Chapter 3, Configuring SMTP Services at <BR>
    http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371

    On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
    > I'm seeing this XTCOM error occur all over our /var/log/messages for one
    > server, running SLES11sp2 / OES11/sp1;
    >
    > I don't really know what this is even for. We don't use NetStorage or
    > iPrint even, this server only does basic NCP file serving, DHCP, and
    > hosts a GroupWise PO.
    > Is this anything to be concerned about?
    If this:
    http://www.linuxquestions.org/questi...entication-vs-
    edirectory-825043/
    is to be believed, it seems to indicate that your NAM configuration on
    this server is not valid. I'm not seeing this message here on the OES
    servers I looked at, and NAM is working correctly here.
    David Gersic dgersic_@_niu.edu
    Knowledge Partner http://forums.netiq.com
    Please post questions in the forums. No support provided via email.
    If you find this post helpful, please click on the star below.

  • BP Address not replicated with the Premise address in IC-Web during move-in

    Hello,
    When we do the move-in of a BP, the premise address is not maintained as an additional address for BP in CRM and IC Web environments. We see the address being maintained in ECC for the BP, but don't see the same address replicated in CRM and IC Web. Please let me know if we are missing anything.
    Thanks
    Santosh.

    Hi,
    Does anyone have any inputs for the above question.
    One more thing we observed is that, whenever we process a move-in (move-in date 7 days from processing date), the primary address in the BP still remains the old address (this is expected), and we see the new address in the Address overview with the new address validity from Move-in date. After 7 days, when the service address becomes the primary address for the BP (This happens after the move-in date), the address in the address tab is replaced with the service address and now this changed address is replicated into CRM. At this time we also see 2 addresses in the overview tab in both CRM and ECC.
    To test this scenario, we processed a move-in with a prior date (Move-in date equal to current date or prior date), we found that the BP address is replaced with the service (premise address) and we see 2 addresses in address overview tab. Now we see the same being replicated in CRM.
      Now my question is, how can we make sure that even if the new address has validity for a post date, CRM will show 2  addresses in address overview tab.
    Edited by: Santosh Kolleti on Feb 17, 2011 12:32 AM

  • TS3276 when I use cable my mail does not work. with wireless ok

    when I use cable my mail does not work. with wireless ok

    Unpower and restart it.  If that doesn't help, try holding menu and left navigation keys TOGETHER for 6 secs.
    AC

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • Hi! Can someone help me with repair service address for Palm TX?

    Hi! Can someone help me with repair service address for Palm TX?
    This question was solved.
    View Solution.

    Good luck, and please let us know here how it works out for you.  We love knowing of current resources who can help solve people's problems with these older devices.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • I have not been able to send email for some time but now i have stopped being able to recieve email.

    i have not been able to send emails for some time but in the last two days ive stopped being able to receive, the message says 'username or password incorrect' ive checked all the settings, ive deleated accout and set up again, ive rebooted phone. i tried to sync with pc but this also fails any ideas

    That is correct, They don't seem to know about Mac, never got a single scrap of help from  them.  Try recreating your account from scratch, delete the account, (write down all your settings first) and add an account, see if that works, and if it does, delete the first account to prevent things doubling up on you.  I think that's what I did, it was quite a while ago.  Hope this helps, or gets you pointed in the right direction.  Maybe go to At&t and try creating another account, and if ti works, delete the first.
    One other tihing I did was to reset Safari, as AT&T uses the net, that's about all I can remember, like I said it was awhile ago.

  • How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

    How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
    == URL of affected sites ==
    https://storefront.kenexa.com/lithia/cc/Home.ss

    There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
    The menu item name changes to the browser UA you are presently using.
    There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
    See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
    You can just start trying IE versions (or the versions it says on the site) until it lets you in.

  • Site list update not working with TED and Zenworks for Servers

    Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
    Subject: Site list update not working with TED and Zenworks for Servers ,
    all on Linux
    Description: We have an exiting environment with 6 ZfS Servers and now we
    brought up a new Server for another location. I configured all same as on
    the other Server and the new one created all NAL-Apps at the new location.
    But in the Application Site list on the golden App is this Application
    missing. So I clicked on the Link up site list on the Distribution Screen
    in C1. On ApplicationSite list the App from the new location is missing.
    So I removed all and added the new from the new location and now i see all
    in the application site list.When I install an app on the client on the
    new location NAL is connecting alway th the same (wrong location-server
    and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
    file.
    I looked on the other tab on C1 at the golden app an I see the backlinks
    are going to all other servers without the new one. Software installation
    on other locations are ok
    Regards

    Andreas,
    I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
    Next delete the Distribution from the Subscriber and then re-push the channel.
    What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
    In this excerpt you will see the entry
    Golden App =
    This should be were the link is to
    You can check this both ways in the Golden App and in the Distributed Application.
    Here is a log from me that shows this info as an example of what you should be looking for.
    2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Maybe you are looking for