Mail-to-Mail scenario - Problem with comm. channel not reading message

Good day,
I am setting up a Mail-to-Mail scenario, where a received e-mail with an attachment is both processed into a file, as well as a monitoring e-mail needs to be send. The attachment processing is an existing process and is still working properly, but my e-mail isn't send. I am using Java mapping to create the destination e-mail based on the source e-mail. Everything is set up in the Directory as well, and through the Test Configuration feature I have tested my new addition to the existing process, I am seeing the result that I am expecting. I have sent a test message and XI picks it up just fine and processes it which is tested by both SXMB_MONI and the resulting file from the attachment.
However, the monitoring e-mail is not sent. Using the runtime workbench, there is an error in the receiver communication channel, being the following error from the Audit Log:
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.util.XMLScanException: java.lang.NullPointerException; nested exception caused by: java.io.IOException: Parsing an empty source. Root element expected!
Looking through the Message Content, I notice there is a SOAP document describing the source message and two payloads. The first payload being the source message in XML format, the second payload is entirely empty. I suspect this empty second payload is causing the NullPointerException, but I am at a loss as to why the payload is empty. The Test Configuration showed me that the message gets through just fine, so what is going wrong?
Here is a link to the configuration of the communication channel, maybe something is wrong here: [Config of communication channel|http://roald.hoolwerf.net/images/cc-config.png]
My question is: What can I do to find what is causing the communication channel to receive an empty payload, and how can I solve this?
Searching for this issue, or the given error on both Google as these forums hasn't given any related posts, if I did miss them in that case I am sorry for posting and please refer to the related topics.
Thank you in advance for taking time to look at this question.
Kind regards,
Roald Hoolwerf
Edited by: Roald Hoolwerf on Feb 1, 2010 3:57 PM

Try this.
Unchecked the configure use authentication.
and use mail package (base64)

Similar Messages

Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

Mail 2 File scenario - problems with attachments in file receiver

Hi experts,
I want to receive PDF documents via email and send them thru file adapter. Now I have some trouble with the attachments. I have configured my mailsender as follows:
localejbs/AF_Modules/PayloadSwapBean    TRANSFORM
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean    mail
Modules:
TRANSFORM       swap.keyName   Content-Disposition
TRANSFORM     swap.keyName     Content-Description
TRANSFORM       swap.keyValue     MailAttachment-1
TRANSFORM       swap.keyValue     attachment;filename="MailAttachment-1.pdf"
Now what modules do I have to use in my file receiver when I want to write the PDF-attachment to my directory? I already tried a lot and referred to many blogs but nothing really worked. I only get my header information in the output file.
Any ideas?
Thanks in advance.
Best regards.
Oliver.

Hi
Check this blogs
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID1810608850DB10913328217115658435End?blog=/pub/wlg/1685
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID1810608850DB10913328217115658435End?blog=/pub/wlg/2849
Regards
Ramesh

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

Yosemite Mail still has sync problems with Gmail - any solutions?

I notice that Yosemite Mail still has sync problems with Gmail. After running for some hours, I noticed there were 6 emails in my Gmail account that had not synced over the past hour.
In the meanwhile, for safety's sake (don't want to miss emails!) I'm back to Mailplane. But I wonder if anybody knows of a solution to this long term problem first introduced in Mavericks. Works fine in iOS Mail though.
Thanks,
doug

I don't think we'll ever have a "best of both worlds" Doug. I've used Gmail since the week it launched the first beta in 2004, and it's always been a bit of a love-hate relationship for me (mostly love). With the demise of the Google Notifier for Mac, I went with Mailplane, but even it has problems. Like when I see my iPhone update with new mail and I'm looking at Mailplane and it won't update at times with even a forced refresh. I often have to close/reopen it to see new messages. But, it's hard to live without my Google Calendar only a tab click away, one of the primary reasons I use Mailplane, that plus changing view zoom sticks with Mailplane and won't with Gmail.
For years I've thought Gmail labels were the perfect filing solution, but over the past few weeks I've been analyzing just how much I really use that feature, and for me...it's not all that much. I think I could simplify my life by putting everything into appropriate folders (as in all other email apps). Apple doesn't realize just how much money they're losing by not allowing people to use private domains with iCloud mail...which I would do in a heartbeat just because it would work perfectly with Mail.app. I would pay even more than I currently pay Google for this solution with Google Apps Business. So, I'm actually on the verge of moving my private domain to the best email service I can find and then using it with Mail.app. The problem here, of course, is I'll lose the best spam control on the planet (Gmail). So, as you say, there simply is not a "best" solution for all these things. I'll at least try a new email service first with some other domain to see how I like it before moving my primary email.
Lastly, the other thing that incenses me is synching of flags between iOS and Apple Mail. It works fine between Gmail and iOS Mail, since all I care about is whether a message is starred/flagged or not. But using Apple Mail, when I flag a message it will not show as flagged in their own iOS Mail, which is incomprehensible, given they built both apps.
If you find a great solution or discover anything new...please post it here, Doug. Thanks.

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

Problem with comma and point

Hello,
I have a problem with comma and point in a double-digit.
I use a english driver for HM8142. When I get the values then I only get
int-digits. How can I change "Use comma as separator" . I tried to change
the option in LabVIEW.
I changed it, then I got the window. "To change, restart the programm". I
have done this. But when I have a look at the option, it is not changed.
What can I do?
I am not the admin on the computer.
Martin

Hi Martin,
you do not have to change any system settings neither in LabVIEW nor in your windows.
All instrument drivers should use a point as decimal separator. You can overwrite the decimal point handling in the string functions "Scan from string" and "Format into string".
Make a right click on the function and use "Edit Scan String". In the dialog open the ring under "Selected operation", the last entry allows you to set the character for the decimal separator. This separator will be used for all the following floating point numbers.
From your name and problem I think you are located in central europe. I do not have a german version of LV so I cannot tell you how the elements are named in german.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

Sync/Async - JMS receiver comm. channel not processing

I have a Sync/Async scenario (without bpm) in PI 7.11:
RFC -> PI -> JMS
whereby the JMS receiver comm. channel does not fully process the message.
More specifically, the RFC sender comm. channel gets a message in and passes the message to the JMS channel, but that JMS channel within the RWB comm. channel log only shows the entry:
- Message processing started
The odd twist to this is that when we bring the PI server down, then back up again, (or wait a period of time, still trying to determine this period) the FIRST message attempt does successfully get processed, i.e. the first message on that JMS receiver comm. channel RWB log shows as:
- Channel successfully processed the message: 08499236-387c-11e0-b002-000025bab2c2
- Stored the correlation ID 08499236-387c-11e0-b002-000025bab2c2 of the request JMS message: ID:c3e2d840d4d8d4f24040404040404040c754dc12d8b54ec6 correponding to the XI message: 08499236-387c-11e0-b002-000025bab2c2
- Message processing started
(but then because of an issue on the target system, no response comes back, so then we'll additionally get the log entry:
- Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: no message received
Any suggestions appreciated on what I can check here to try and figure this out. Possibly because the first message eventually errors out, it is stopping the other subsequent msgs from getting processed...
When I check the audit logs of a 'success' msg vs. a not-successful msg, the success msg has an entry (and subsequent entries) of:
14.02.2011 12:50:19 Information Transform: transforming the payload ...
14.02.2011 12:50:19 Information Transform: successfully transformed
14.02.2011 12:50:19 Information ROB: entering RequestOnewayBean
14.02.2011 12:50:19 Information ROB: forwarding the request message
14.02.2011 12:50:19 Information ROB: leaving RequestOnewayBean
14.02.2011 12:50:19 Information JMS Message was forwarded to the JMS provider succesfully."
14.02.2011 12:50:19 Information XMB Message as Binary was forwarded to the SAP XI JMS service succesfully.
14.02.2011 12:50:19 Information WRB: entering WaitResponseBean
14.02.2011 12:50:19 Information WRB: retrieving the message for 08499236-387c-11e0-b002-000025bab2c2 ...
wheras the non-success msg shows only:
14.02.2011 12:55:30 Information Transform: transforming the payload ...
14.02.2011 12:55:30 Information Transform: successfully transformed
14.02.2011 12:55:30 Information ROB: entering RequestOnewayBean
14.02.2011 12:55:30 Information ROB: forwarding the request message
14.02.2011 12:55:30 Information ROB: leaving RequestOnewayBean
So, we can see that the message is not "forwarded to the JMS provider..." in the non-success case.
And also the sxi_monitor shows these messages with a status of "Log version".
Keith

Hi Siddhesh - yes that was a while back and am trying to remember the resolution. I have implemented sync/async bridges (as well as async/sync bridges) successfully, so I don't mind checking your settings, particularly I am interested in the settings within the Module tab of the JMS receiver. I can then compare to mine if you'd like. Also if you can let me know what underlying queuing system in that target system (e.g. MQSeries?) that would be great.
Regards,
Keith

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

JaillotJb wrote:
I download the iOS7 Beta even if I was not a developper.
if you downloaded it and are not a developer, then we are not allowed to help you here. sorry.

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!

fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

Problem with file descriptors not released by JMF

Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.

Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects.

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Not here; updated three systems without issues.
Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
Russ

Problems with SharePoint2010 and Adobe Reader X

hi all,
i have a big problem with SharePoint2010 and Adobe Reader x. We can open .pdf Files from SharePoint but not Safe. The Error Message is "
SharePoint, SQL and OS are installed in English. The problem is that the site was probably created from a German template. One would have to create the site from an English template and then add the other languages by MUI. It is a matter which language site in the settings under Language Settings is uppermost to:
how can the problem be solved?it looks like here, the reader still an error..
andre

Hi,
Could you repost the error-message that you see in Adobe Reader? The problem might be because of a known bug in Microsoft SharePoint server 2010. Certain required field types are missing in the German/French site templates which cause a SOAP request on the server to fail. A workaround is to add these field types to the library. You could add these fields manually or using a script. You could look for following field types which might be missing from the site template.
"Content Type ID","Approver Comments","Name","Document Modified By","Document Created By","File Type","HTML File Type","Source URL","Shared File Index","Title","Template Link","HTML File Link","Is Signed", "Document ID Value", "Document ID", "Content Type", "Created", "Created By", "Modified", "Modified By", "Has Copy Destinations", "Copy Source", "Approval Status", "URL Path", "File Size", "Item Type","Sort Type", "Effective Permissions Mask", "ID of the User who has the item Checked Out", "Is Checked out to local", "Checked Out To", "Unique Id", "Client Id", "Virus Status", "Check In Comment", "Edit Menu Table Start", "Edit Menu Table End", "Server Relative URL", "Encoded Absolute URL", "Property Bag", "Level", "Is Current Version", "Item Child Count", "Folder Child Count", "Select", "Edit", "UI Version", "Instance ID", "Order", "Workflow Version", "Workflow Instance ID", "Source Version (Converted Document)", "Source Name (Converted Document)", "Document Concurrency Number","Relink", "Merge", "Path"
Thanks,
Richa

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

Mail-to-Mail scenario - Problem with comm. channel not reading message

Similar Messages

Maybe you are looking for