Mailboxes with different column headings

This question was somewhat covered in 2006-2007 but not recently. I would like to set different column headings for certain mailboxes in Mail. I understand that the Inbox folder keeps a "logical" set of columns (From and not To, for example). The folder Sent also behaves the same. But I have organized most of my Received messages in a folder which then has subfolders for each company or person or sets of persons. I also organized my Sent messages in separate into a Mailbox called Sent Messages with appropriate subfolders/mailboxes. I would like to keep all of the Mailboxes that "receive messages" with certain columns (such as From and not To) and the "sent messages" with a different set of columns (To instead of From, Date Sent instead of Date Received, etc...). But I cannot do that in Mail 5.3 running on MacOS 10.7.5 . Is there a solution to achive these settings permanently?
Thanks for any suggestion.

Hello, I see this is an old post but is marked as solved. Did you find a way to do this? I've been looking for a way but to no avail.
thanks
-Pete

Similar Messages

  • Trying to get different column headings for folders in Apple Mail - Help!

    Hi there
    I really hope someone can help here.
    I have a few different email accounts coming into my Apple Mail program. For each account I am using a 'Saved' folder (for the incoming email i have read) and a 'Sent' folder (for the emails I have sent).
    In my 'Saved' folder, I want my column headings to be:
    a. Who the email is from
    b. The subject line
    c. The date and time received
    In my 'Sent' folder, I want my column headings to be:
    a. The address I have sent to
    b. The subject line
    c. The date and time received
    The problem is that when I changed the column headings for one folder, it changes them for all of them. So I can display who my incoming emails are from, but in the sent folder, it only tells me who my sent emails are from....me!! This is no use at all. Is there anyway to apply different column headings to different folders? In Entourage this is easy, but Im at a loss of what to do in mail.
    Please help if you can
    Many thanks
    Dan

    as i said, Sent mailbox is special and can have custom columns separate from other mailboxes. ALL other mailboxes have the same columns and you can only customize them simultaneously. if you want to change that leave Apple feedback on the issue
    http://www.apple.com/feedback/macosx.html

  • BO xi 3.1 u2013 schedule a template for multiple reports with different column

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks!

    Hi,
    The only approach I can think of is to create a template report which uses variables
    For each column you would need to variable
    v_columnAName and v_columnAValue
    v_columnAName would have a if statement in it
    =if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
    v_columnA would have a if statement in it
    =if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
    This would only work when you had a small set of clients.
    This might be more managable if it was done in the universe
    Regards
    Alan

  • How to create a form with two column headings

    I have a business request to create a data form to handle multi year data by month. This will require creating a form with two column headings - with the first row be Year and second row be month, and data entry will begin in the third row and down.
    I can do multiple row headings in the layout design, but somehow can not get it to work for multiple column headings.
    Thanks in advance

    If you're in the "Layout" tab, simply pull the "Years" dimension and the "Period" dimension into the Column section. Planning can be a little picky about where you "drop" the dimension as you're dragging and dropping it. Drop it in the cell directly under the letter name of the column. Other than that, there's not much to it.
    Hopefully this helped,
    - Jake

  • Is it possible to create a Synonym with different column names

    Hi,
    I want to create a Synonym with different columns names (Columns not in original table) . I am not sure if this can be done . Any suggessions...
    Thanks in advance....

    Synonyms are not limited to tables. Accroding to the SQL Reference, a synonym is:
    an alternative name for a table, view, sequence, procedure, stored function, package, materialized view, Java class schema object, user-defined object type, or another synonym.
    In fact, synonyms are not even validated until they are used:
    SQL> create synonym my_synonym for table_which_does_not_exist;
    Synonym created
    SQL> select * from my_synonym;
    select * from my_synonym
    ORA-00980: synonym translation is no longer valid

  • BI Answers - need 2 compound layouts with tables with different columns

    Hi,
    I need 2 tables in the same report with different columns displaying. Is this possible?
    I wanted to put them in their own compound layout and call each one with a view selector,
    but it seems impossible to create a 2nd table with different columns in the one report.
    Each time I try and replace one of the columns in the 2nd table with a different column,
    a message appears saying the deleted column will be deleted from all views.
    Many thanks for anyone's help.
    - Jenny

    As per my knowledge - your requirement can be done with Pivot view but not with regular table view.
    We dont have exclude column - functionality in table view.
    Else, instead of creating in same report create the req. with 2 separ. reports but place them on single dashboard in 2 sep. sections.

  • Design a single template for multiple reports with different column order

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks in advance.

    -As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
    As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
    -I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
    For the customer that want the same ordering of columns you can put those customers under one condition.
        for Example...
              if(?Client in ['clientA','clientA']) then
                        <TableName>.<Field>......
    -What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
    Regards,
    Amrita
    Edited by: Amrita Singh on May 21, 2009 7:54 AM

  • Many to many join table with different column names

    Hi have a joint table with different column names as foreign keys in the joining
    tables...
    e.g. i have a many to many reltnshp btwn Table A and Table B ..and join table
    C
    both have a column called pk.
    and the join table C has columns call fk1 and fk2
    does cmd require the same column name in the join table as in the joining table?
    are there any workarounds?
    thanks

    HI,
    No, the foreign key column names in the join table do not have to match the primary
    key names in the joined tables.
    -thorick

  • How to download output data into Excel with all Column Headings

    Hi Experts,
    Please tell me How to download output data of ALV Grid into Excel file with all Column Headings and I want to do this using coding,
    please send me if any solution is available.
    Thanks & Regards,
    Yogesh

    VERSION CONTROL (Most recent on top):                                *
      DATE(mm.dd.yyyy)    AUTHOR                                         *
      06.25.2007         Pattan Naveen                                   *
    Hi yogesh,,
    Go through this in this u find ur solution.
    report ZTEst_programe no standard page heading
                               line-size 100
                               line-count 50(5)
                               message-id zz.
    *--alv type declaration
    type-pools: slis.
    *--Tables:
    tables: anla,
            anlz,
            anlh,
            anlb,
            anlc.
    data: v_pos type i.
    data: v_ndjar type i.
    data: v_ndper type i,
          v_ndperndabp type i,
          v_ndjarndabp1 type i,
          v_ndjarndabp type i,
          value type i,
    date(10) type c value '2006.12.04'.
    data: c_0000(4) type c value '0000'.
    data: begin of it_final occurs 0,
             anlkl(8),
             bukrs(4),
             anln1 like anla-anln1,
             anln2 like anla-anln2,
             txt50 like anla-txt50,
             txa50 like anla-txa50,
             anlhtxt like anlh-anlhtxt,
             sernr like anla-sernr,
             invnr like anla-invnr,
             menge like anla-menge,
             meins like anla-meins,
             inken like anla-inken,
               ivdat like anla-ivdat,
             aktiv like anla-aktiv,
             gsber like anlz-gsber,
             kostl like anlz-kostl,
             kostlv like anlz-kostlv,
             werks like anlz-werks,
             stort like anlz-stort,
              raumn like anlz-raumn,
              txjcd like anlz-txjcd,
             ord41 like anla-ord41,
             ord44 like anla-ord44,
             gdlgrp like anla-gdlgrp,
             anlue like anla-anlue,
             lifnr like anla-lifnr,
             typbz like anla-typbz,
             aibn1 like anla-aibn1,
          aibn2 like anla-aibn2,
            aibdt like anla-aibdt,
             posnr like anla-posnr,
            vmgli like anla-vmgli,
            invzu like anla-invzu,
            ernam like anla-ernam,
            erdat like anla-erdat,
             afabe like anlb-afabe,
            afasl like anlb-afasl,
             ndjar like anlb-ndjar,
             ndper like anlb-ndper,
            afabg like anlb-afabg,
            ndabj like anlc-ndabj,
            ndabp like anlc-ndabp,
            andsj like anlc-andsj,
             andsp like anlc-andsp,
            safbg like anlb-safbg,
             umjar like anlb-umjar,
           inbda like anlb-inbda,
           kansw like anlc-kansw,
           knafa like anlc-knafa,
            kaafa like anlc-kaafa,
                     deakt like anla-deakt,
    kanza like anlc-kanza,
    kaufw like anlc-kaufw,
    kinvz like anlc-kinvz,
    ksafa like anlc-ksafa,
    kmafa like anlc-kmafa,
      end of it_final.
    data: begin of it_final_as91 occurs 0,
             anlkl(8),
             bukrs(4),
             anln1 like anla-anln1,
             anln2 like anla-anln2,
             txt50 like anla-txt50,
             txa50 like anla-txa50,
             anlhtxt like anlh-anlhtxt,
             sernr like anla-sernr,
             invnr like anla-invnr,
             menge like anla-menge,
             meins like anla-meins,
             inken like anla-inken,
             ivdat like anla-ivdat,
             aktiv like anla-aktiv,
             gsber like anlz-gsber,
             kostl like anlz-kostl,
             kostlv like anlz-kostlv,
             werks like anlz-werks,
             stort like anlz-stort,
             raumn like anlz-raumn,
             txjcd like anlz-txjcd,
             ord41 like anla-ord41,
             ord44 like anla-ord44,
             gdlgrp like anla-gdlgrp,
             anlue like anla-anlue,
             lifnr(10),
             typbz(15),
             aibn1 like anla-aibn1,
             aibn2 like anla-aibn2,
            aibdt like anla-aibdt,
             posnr like anla-posnr,
            vmgli like anla-vmgli,
            invzu like anla-invzu,
            ernam like anla-ernam,
            erdat like anla-erdat,
    end of it_final_as91.
    data: it_download_as91 like it_final_as91 occurs 0
                                              with header line."#EC NEEDED
    data: begin of it_final_as92 occurs 0,
             anlkl(8),
             bukrs(4),
             anln1 like anla-anln1,
             anln2 like anla-anln2,
             deakt like anla-deakt,
             ernam like anla-ernam,
             erdat like anla-erdat,
             afabe like anlb-afabe,
             afasl like anlb-afasl,
             ndjar like anlb-ndjar,
             ndper like anlb-ndper,
              afabg like date,
             ndabj(3) type c,
             ndabp(3) type c,
            kansw like anlc-kansw,
           knafa like anlc-knafa,
            kaafa like anlc-kaafa,
    kanza like anlc-kanza,
    kaufw like anlc-kaufw,
    kinvz like anlc-kinvz,
    ksafa like anlc-ksafa,
    kmafa like anlc-kmafa,
      end of it_final_as92.
    data: it_download_as92 like it_final_as92 occurs 0
                                              with header line."#EC NEEDED
    data: begin of it_values occurs 0,
             anlkl(8),
             bukrs(4),
             anln1 like anla-anln1,
             anln2 like anla-anln2,
             deakt like anla-deakt,
             afabe like anlb-afabe,
            afasl like anlb-afasl,
             ndjar like anlb-ndjar,
             ndper like anlb-ndper,
             afabg like date,
             ndabj(3) type c,
             ndabp(3) type c,
             afabe_02 like anlb-afabe,
             afasl_02 like anlb-afasl,
             ndjar_02 like anlb-ndjar,
             ndper_02 like anlb-ndper,
              afabg_02 like date,
             ndabj_02 like anlc-ndabj,
             ndabp_02 like anlc-ndabp,
            kansw01 like anlc-kansw,
           knafa01 like anlc-knafa,
            kaafa01 like anlc-kaafa,
              kansw02 like anlc-kansw,
           knafa02 like anlc-knafa,
            kaafa02 like anlc-kaafa,
              kansw03 like anlc-kansw,
           knafa03 like anlc-knafa,
            kaafa03 like anlc-kaafa,
              kansw04 like anlc-kansw,
           knafa04 like anlc-knafa,
            kaafa04 like anlc-kaafa,
              kansw05 like anlc-kansw,
           knafa05 like anlc-knafa,
            kaafa05 like anlc-kaafa,
           kansw06 like anlc-kansw,
           knafa06 like anlc-knafa,
           kaafa06 like anlc-kaafa,
           kansw07 like anlc-kansw,
           knafa07 like anlc-knafa,
           kaafa07 like anlc-kaafa,
           kansw08 like anlc-kansw,
           knafa08 like anlc-knafa,
           kaafa08 like anlc-kaafa,
           kansw09 like anlc-kansw,
           knafa09 like anlc-knafa,
           kaafa09 like anlc-kaafa,
    kanza01 like anlc-kanza,
    kaufw01 like anlc-kaufw,
    kinvz01 like anlc-kinvz,
    ksafa01 like anlc-ksafa,
    kmafa01 like anlc-kmafa,
      end of it_values.
    data: it_values_xls like it_values occurs 0
                                       with header line."#EC NEEDED
    data: begin of it_itab1 occurs 0,
           bukrs like anla-bukrs,
           anlkl like anla-anlkl,
           anln1 like anla-anln1,
             anln2 like anla-anln2,
           txt50 like anla-txt50,
           txa50 like anla-txa50,
           invnr like anla-invnr,
           ktogr like anla-ktogr,
           sernr like anla-sernr,
           menge like anla-menge,
           meins like anla-meins,
           ivdat like anla-ivdat,
           inken like anla-inken,
           aktiv like anla-aktiv,
           deakt like anla-deakt,
           zugdt like anla-zugdt,
           zujhr like anla-zujhr,
           zuper like anla-zuper,
           gdlgrp like anla-gdlgrp,
           anlue like anla-anlue,
           xafabch like anla-xafabch,
           aibn1 like anla-aibn1,
           aibn2 like anla-aibn2,
           aibdt like anla-aibdt,
           posnr like anla-posnr,
           ord41 like anla-ord41,
            ord44 like anla-ord44,
            vmgli like anla-vmgli,
             invzu like anla-invzu,
             typbz like anla-typbz,
             lifnr like anla-lifnr,
             ernam like anla-ernam,
             erdat like anla-erdat,
          end of it_itab1.
    data: begin of it_itab2 occurs 0,
            bukrs like anlz-bukrs,
            anln1 like anlz-anln1,
             anln2 like anla-anln2,
            bdatu like anlz-bdatu,
            werks like anlz-werks,
            gsber like anlz-gsber,
            kostl like anlz-kostl,
            kostlv like anlz-kostlv,
            stort like anlz-stort,
            raumn like anlz-raumn,
            txjcd like anlz-txjcd,
            ipsnr like anlz-ipsnr,
          end of it_itab2.
    data: begin of it_itab3 occurs 0,
            bukrs like anlh-bukrs,
            anln1 like anlh-anln1,
            anlhtxt like anlh-anlhtxt,
           end of it_itab3.
    data: begin of it_itab4 occurs 0,
            bukrs like anlb-bukrs,
            anln1 like anlb-anln1,
             anln2 like anla-anln2,
            afabe like anlb-afabe,
            bdatu like anlb-bdatu,
            afasl like anlb-afasl,
            ndjar like anlb-ndjar,
            ndper like anlb-ndper,
            afabg like anlb-afabg,
            ndurj like anlb-ndurj,
            ndurp like anlb-ndurp,
            umjar like anlb-umjar,
            safbg like anlb-safbg,
            zinbg like anlb-zinbg,
            inbda like anlb-inbda,
            end of it_itab4.
    data: begin of it_itab5 occurs 0,
           bukrs like anlc-bukrs,
           anln1 like anlc-anln1,
             anln2 like anla-anln2,
           gjahr like anlc-gjahr,
           afabe like anlc-afabe,
           zujhr like anlc-zujhr,
           zucod like anlc-zucod,
           ndabj like anlc-ndabj,
           ndabp like anlc-ndabp,
           kansw like anlc-kansw,
           knafa like anlc-knafa,
           kaafa like anlc-kaafa,
           ksafa like anlc-ksafa,
           andsj like anlc-andsj,
           andsp like anlc-andsp,
    kanza like anlc-kanza,
    kaufw like anlc-kaufw,
    kinvz like anlc-kinvz,
    kmafa like anlc-kmafa,
          end of it_itab5.
    ALV DECLARATIONS
    *--declarations for Xls sheet header field names
    data: begin of it_head occurs 0,
    column(70).
    data: end of it_head.
    data: begin of it_head1 occurs 0,
    column(70).
    data: end of it_head1.
    *--type declarations for field catalog for basic report
    data: it_fldcat_head  type slis_t_fieldcat_alv,
          wa_fldcat_head type slis_fieldcat_alv."#EC NEEDED
    data : w_field type slis_fieldcat_alv."#EC NEEDED
    data: it_fldcat_head1  type slis_t_fieldcat_alv,
          wa_fldcat_head1 type slis_fieldcat_alv."#EC NEEDED
    *--type declarations for layout design
    data: wa_layout type slis_layout_alv.
    *--type declarations for list header on grid
    *data: top_of_page type slis_t_listheader.
    *--declaration of variables
    data : w_repid like sy-repid.
    **selection-screen
    select-options: s_bukrs for anla-bukrs,
                    s_anln1 for anla-anln1.
    select-options: s_deakt for anla-deakt,
                    s_gjahr for anlc-gjahr obligatory,
                    s_anlkl for anla-anlkl,
                    s_date for anla-aktiv.
    *selection-screen
    selection-screen begin of block blk1 with frame title  text-022.
    selection-screen begin of line.
    parameters : r1 radiobutton group g1 default 'X'.
    selection-screen comment 20(50) text-020.
    selection-screen end of line.
    selection-screen begin of line.
    parameters : r2 radiobutton group g1.
    selection-screen comment 20(50) text-021.
    selection-screen end of line.
    selection-screen end of block blk1.
    selection-screen begin of block blk2 with frame title  text-023.
    select-options: s_ernam for anla-ernam,
                       s_erdat for anla-erdat .
    selection-screen end of block blk2.
    *--INITIALIZATION
    initialization.
      w_repid = sy-repid.
    at selection-screen.
      if r1 = 'X'.
        perform selection_screen_validation.
      endif.
      if r2 = 'X'.
        perform selection_screen_validation.
      endif.
    *--START-OF-SELCTION
    start-of-selection.
      if r1 = 'X'.
        perform populate-data.
        perform fill_finaldata.
       perform comment_build using top_of_page.
        perform xls_output.
        perform download.
      endif.
      if r2 = 'X'.
        perform populate-data.
        perform fill_finaldata.
        perform fill_as92data.
        perform putdata_horizontal.
        perform xls_output_as92.
        perform download_as92.
      endif.
    *--END-OF-SELCTION
    end-of-selection.
      if r1 = 'X'.
        perform build_layout.
        perform build_fieldcatalog.
       perform top_of_page.
        perform list-display.
      endif.
      if r2 = 'X'.
        perform build_layout.
        perform build_fieldcatalog1.
        perform list-display1.
      endif.
    *&      Form  SELECTION_SCREEN_VALIDATION
          text
    -->  p1        text
    <--  p2        text
    form selection_screen_validation.
    *--validating originating company code
      data: l_bukrs like anla-bukrs."#EC NEEDED
      if not s_bukrs[] is initial.
        select single bukrs from anla
               into l_bukrs
               where bukrs in s_bukrs.
        if sy-subrc <> 0.
          message e000 with text-001 .
        endif.
      endif.
    *--validating originating main asset no.
      data: l_anln1 like anla-anln1."#EC NEEDED
      if not s_anln1[] is initial.
        select single anln1 from anla
               into l_anln1
               where anln1 in s_anln1.
        if sy-subrc <> 0.
          message e000 with text-002 .
        endif.
      endif.
    *--validating originating Deactivation date
      data: l_deakt like anla-deakt."#EC NEEDED
      if not s_deakt[] is initial.
        select single deakt from anla
               into l_deakt
               where deakt in s_deakt.
        if sy-subrc <> 0.
          message e000 with text-004 .
        endif.
      endif.
    *--validating originating asset class.
      data: l_anlkl like anla-anlkl."#EC NEEDED
      if not s_anlkl[] is initial.
        select single anlkl from anla
               into l_anlkl
               where anlkl in s_anlkl.
        if sy-subrc <> 0.
          message e000 with text-006 .
        endif.
      endif.
    *--validating originating Date
      data: l_date like anla-aktiv."#EC NEEDED
      if not s_date[] is initial.
        select single aktiv from anla
               into l_date
               where aktiv in s_date.
        if sy-subrc <> 0.
          message e000 with text-007 .
        endif.
      endif.
    *--validating originating Fiscal year which first acquisition was posted
      data: l_gjahr like anlc-gjahr."#EC NEEDED
      if not s_gjahr[] is initial.
        select single gjahr from anlc
               into l_gjahr
               where gjahr in s_gjahr.
        if sy-subrc <> 0.
          message e000 with text-008.
        endif.
      endif.
      data: l_ernam like anla-ernam."#EC NEEDED
      if not s_ernam[] is initial.
        select single ernam from anla
               into l_ernam
               where ernam in s_ernam.
        if sy-subrc <> 0.
          message e000 with text-009.
        endif.
      endif.
      data: l_erdat like anla-erdat."#EC NEEDED
      if not s_erdat[] is initial.
        select single erdat from anla
               into l_erdat
               where erdat in s_erdat.
        if sy-subrc <> 0.
          message e000 with text-010.
        endif.
      endif.
    endform.                    " SELECTION_SCREEN_VALIDATION
    *&      Form  POPULATE-DATA
          text
    -->  p1        text
    <--  p2        text
    form populate-data.
      select bukrs
             anlkl
             anln1
             anln2
             txt50
             txa50
             invnr
             ktogr
             sernr
             menge
             meins
             ivdat
             inken
             aktiv
             deakt
             zugdt
             zujhr
             zuper
             gdlgrp
             anlue
             xafabch
             aibn1
             aibn2
             aibdt
             posnr
             ord41
             ord44
             vmgli
             invzu
             typbz
             lifnr
             ernam
             erdat
            from anla
                into table it_itab1
                where anlkl in s_anlkl and
                      anln1 in s_anln1 and
                      deakt in s_deakt and
                      bukrs in s_bukrs and
                      aktiv in s_date.
      if sy-subrc ne 0.
        message e000 with 'Data does not exist'(094).
      endif.
      if not it_itab1[] is initial.
        select bukrs
               anln1
               anln2
               bdatu
               werks
               gsber
               kostl
               kostlv
               stort
               raumn
               txjcd
               ipsnr
               from anlz
               into table it_itab2
               for all entries in it_itab1
               where bukrs = it_itab1-bukrs and
                     anln1 = it_itab1-anln1 and
                    anln2 = it_itab1-anln2.
                      anln2 = '0000'.
        if sy-subrc ne 0.
          message e000 with 'Data does not exist'(094).
        endif.
      endif.
      if not it_itab2[] is initial.
        select bukrs
               anln1
               anlhtxt
               from anlh
               into table it_itab3
        for all entries in it_itab2
        where bukrs = it_itab2-bukrs and
              anln1 = it_itab2-anln1.
        if sy-subrc ne 0.
          message e000 with 'Data does not exist'(094).
        endif.
      endif.
      if not it_itab1[] is initial.
        select bukrs
        anln1
        anln2
        afabe
        bdatu
        afasl
        ndjar
        ndper
        afabg
        ndurj
        ndurp
        umjar
        safbg
        zinbg
        inbda
        from anlb
        into table it_itab4
        for all entries in it_itab1
        where bukrs = it_itab1-bukrs and
              anln1 = it_itab1-anln1 and
             anln2 = it_itab1-anln2.
               anln2 = '0000'.
        if sy-subrc ne 0.
          message e000 with 'Data does not exist'(094).
        endif.
      endif.
      sort it_itab4  by bukrs anln1 anln2 afabe.
      if not it_itab4[] is initial.
        select bukrs
              anln1
              anln2
             gjahr
            afabe
            zujhr
            zucod
             ndabj
             ndabp
             kansw
             knafa
             kaafa
             ksafa
             andsj
             andsp
             kanza
    kaufw
    kinvz
    kmafa
             from anlc
             into table it_itab5
             for all entries in it_itab4
             where bukrs = it_itab4-bukrs and
                anln1 = it_itab4-anln1 and
               anln2 = it_itab4-anln2 and
                anln2 = '0000' and
                gjahr in s_gjahr.
        if sy-subrc ne 0.
          message e000 with 'Data does not exist'(094).
        endif.
      endif.
      sort it_itab5 by bukrs anln1 anln2 ndabj ndabp.
    endform.                    " POPULATE-DATA
    *&      Form  FILL_FINALDATA
          text
    -->  p1        text
    <--  p2        text
    form fill_finaldata.
      loop at it_itab5.
        loop at it_itab4 where bukrs = it_itab5-bukrs and
                            anln1 = it_itab5-anln1 and
                            anln2 = it_itab5-anln2 and
                            afabe = it_itab5-afabe.
          it_final-afabe = it_itab4-afabe.
          it_final-afasl = it_itab4-afasl.
          it_final-ndjar = it_itab4-ndjar.
          it_final-ndper = it_itab4-ndper.
          it_final-afabg = it_itab4-afabg.
          it_final-umjar = it_itab4-umjar.
          it_final-safbg = it_itab4-safbg.
          it_final-inbda = it_itab4-inbda.
          it_final-ndabj = it_itab5-ndabj.
          it_final-ndabp = it_itab5-ndabp.
          it_final-kansw = it_itab5-kansw.
          it_final-knafa = it_itab5-knafa.
          it_final-kaafa = it_itab5-kaafa.
          it_final-andsj = it_itab5-andsj.
          it_final-andsp = it_itab5-andsp.
          it_final-kanza = it_itab5-kanza.
          it_final-kaufw = it_itab5-kaufw.
          it_final-kinvz = it_itab5-kinvz.
          it_final-ksafa = it_itab5-ksafa.
          it_final-kmafa = it_itab5-kmafa.
          read table it_itab1 with key   bukrs = it_itab5-bukrs
                                      anln1 = it_itab5-anln1
                                      anln2 = it_itab5-anln2.
          if sy-subrc = 0.
            it_final-anlkl = it_itab1-anlkl.
            it_final-anln1 = it_itab1-anln1.
            it_final-anln2 = it_itab1-anln2.
            it_final-bukrs = it_itab1-bukrs.
            it_final-txt50 = it_itab1-txt50.
            it_final-txa50 = it_itab1-txa50.
            it_final-invnr = it_itab1-invnr.
            it_final-sernr = it_itab1-sernr.
            it_final-menge = it_itab1-menge.
            it_final-meins = it_itab1-meins.
            it_final-ivdat = it_itab1-ivdat.
            it_final-inken = it_itab1-inken.
            it_final-aktiv = it_itab1-aktiv.
            it_final-deakt = it_itab1-deakt.
            it_final-gdlgrp = it_itab1-gdlgrp.
            it_final-anlue = it_itab1-anlue.
            it_final-aibn1 = it_itab1-aibn1.
            it_final-aibn2 = it_itab1-aibn2.
            it_final-aibdt = it_itab1-aibdt.
            it_final-ord41 = it_itab1-ord41.
            it_final-ord44 = it_itab1-ord44.
            it_final-vmgli = it_itab1-vmgli.
            it_final-typbz = it_itab1-typbz.
            it_final-lifnr = it_itab1-lifnr.
            it_final-posnr = it_itab1-posnr.
            it_final-invzu = it_itab1-invzu.
          endif.
          read table it_itab2 with key   bukrs = it_itab5-bukrs
                                    anln1 = it_itab5-anln1
                                    anln2 = it_itab5-anln2.
          if sy-subrc = 0.
            it_final-werks = it_itab2-werks.
            it_final-gsber = it_itab2-gsber.
            it_final-kostl = it_itab2-kostl.
            it_final-kostlv = it_itab2-kostlv.
            it_final-stort = it_itab2-stort.
            it_final-raumn = it_itab2-raumn.
            it_final-txjcd = it_itab2-txjcd.
          endif.
          read table it_itab3 with key  bukrs = it_itab5-bukrs
                                     anln1 = it_itab5-anln1.
          if sy-subrc = 0.
            it_final-anlhtxt = it_itab3-anlhtxt.
          endif.
          append it_final.
          clear it_final.
        endloop.
      endloop.
      loop at it_final.
        move-corresponding it_final to it_final_as91.
        append it_final_as91.
        clear it_final_as91.
      endloop.
      delete adjacent duplicates from it_final_as91 comparing anlkl bukrs
      anln1 anln2.
      it_download_as91[] = it_final_as91[].
    endform.                    " FILL_FINALDATA
    *&      Form  BUILD_LAYOUT
          text
    -->  p1        text
    <--  p2        text
    form build_layout.
      wa_layout-zebra = 'X'.
    endform.                    " BUILD_LAYOUT
    *&      Form  BUILD_FIELDCATALOG
          text
    -->  p1        text
    <--  p2        text
    form build_fieldcatalog.
      if it_fldcat_head is initial.
        v_pos = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'ANLKL'.
        wa_fldcat_head-seltext_l = 'Asset Class'(093).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'BUKRS'.
        wa_fldcat_head-seltext_l = 'Company'(092).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'ANLN1'.
        wa_fldcat_head-seltext_l = 'Asset No'(091).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'ANLN2'.
        wa_fldcat_head-seltext_l = 'Asset Sub No'(090).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'TXT50'.
        wa_fldcat_head-seltext_l = 'Asset Des.'(089).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'TXA50'.
        wa_fldcat_head-seltext_l = 'Asset Des.'(088).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'ANLHTXT'.
        wa_fldcat_head-seltext_l = 'Asset main no txt'(087).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'SERNR'.
        wa_fldcat_head-seltext_l = 's.no/Expl no.'(086).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'INVNR'.
        wa_fldcat_head-seltext_l = 'Inv No'(085).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'MENGE'.
        wa_fldcat_head-seltext_l = 'Qtty'(084).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'MEINS'.
        wa_fldcat_head-seltext_l = 'Units'(083).
        append wa_fldcat_head to it_fldcat_head.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'INKEN'.
        wa_fldcat_head-seltext_l = 'Inv indi.'(082).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'IVDAT'.
        wa_fldcat_head-seltext_l = 'Last inv date'(081).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'AKTIV'.
        wa_fldcat_head-seltext_l = 'Asset Capital date'(080).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'GSBER'.
        wa_fldcat_head-seltext_l = 'Busin. Area'(079).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'KOSTL'.
        wa_fldcat_head-seltext_l = 'cost centre'(078).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'KOSTLV'.
        wa_fldcat_head-seltext_l = 'CC respon.for asset'(077).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'WERKS'.
        wa_fldcat_head-seltext_l = 'Plant'(076).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'STORT'.
        wa_fldcat_head-seltext_l = 'Asset location'(075).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'RAUMN'.
        wa_fldcat_head-seltext_l = 'Room'(074).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'TXJCD'.
        wa_fldcat_head-seltext_l = 'Tax. Jur.'(073).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'ORD41'.
        wa_fldcat_head-seltext_l = 'Evaluation Grp 1'(072).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'ORD44'.
        wa_fldcat_head-seltext_l = 'Evaluation Grp 4'(071).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'GDLGRP'.
        wa_fldcat_head-seltext_l = 'Evalu. group 5'(070).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'ANLUE'.
        wa_fldcat_head-seltext_l = 'Asset Super No'(069).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'LIFNR'.
        wa_fldcat_head-seltext_l = 'Vendor Acct. No.'(068).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'TYPBZ'.
        wa_fldcat_head-seltext_l = 'Reference no'(067).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'AIBN1'.
        wa_fldcat_head-seltext_l = 'Original Asset Trans.'(066).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'AIBN2'.
        wa_fldcat_head-seltext_l = 'Original Asset Trans.'(065).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'AIBDT'.
        wa_fldcat_head-seltext_l = 'Trans. Asset'(064).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'POSNR'.
        wa_fldcat_head-seltext_l = 'WBS Elt. Invt. Proj.'(063).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'VMGLI'.
        wa_fldcat_head-seltext_l = 'Property clas.key'(062).
        append wa_fldcat_head to it_fldcat_head.
       V_POS = 0.
        v_pos = v_pos + 1.
        w_field-col_pos = v_pos.
        wa_fldcat_head-tabname = 'it_FINAL_AS91'.
        wa_fldcat_head-fieldname = 'INVZU'.
        wa_fldcat_head-seltext_l = 'suppl.inv spec.'(061).
        append wa_fldcat_head to it_fldcat_head.
      endif.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  COMMENT_BUILD
          text
         -->P_TOP_OF_PAGE  text
    *form comment_build using top_of_page type slis_t_listheader.
    data: ls_line type slis_listheader.
    ****Header
    clear : ls_line.
    ls_line-typ = 'H'.
    LS_LINE-KEY: not used for this type
    ls_line-info = 'ASSET MASTER DATA LIST'.
    append ls_line to top_of_page.
    ****Selection
    clear ls_line.
    ls_line-typ = 'S'.
    ls_line-key = 'Key 1'.
    ls_line-info = 'Asset Records'.
    append ls_line to top_of_page.
    ****Action
    clear ls_line.
    ls_line-typ = 'A'.
    LS_LINE-KEY: not used for this type
    ls_line-info = 'for AS91'.
    append ls_line to top_of_page.
    *endform. "comment_build
          FORM top_of_page                                              *
    *form top_of_page.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
          exporting
               i_logo             = 'ENJOYSAP_LOGO'
               it_list_commentary = top_of_page.
    *endform. "top_of_page
    *&      Form  LIST-DISPLAY
          text
    -->  p1        text
    <--  p2        text
    form list-display.
    wa_layout-colwidth_optimize = 'X'.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program     = w_repid
               i_callback_top_of_page = 'TOP_OF_PAGE'
                is_layout              = wa_layout
                it_fieldcat            = it_fldcat_head
               i_background_id        = 'ALV_BACKGROUND'
           tables
                t_outtab               = it_final_as91
           exceptions
                program_error          = 1
                others                 = 2.
      if sy-subrc <> 0.
    write:/'No Top of Page'(098).
      endif.
    endform.                    " LIST-DISPLAY
    *&      Form  DOWNLOAD
          text
    -->  p1        text
    <--  p2        text
    form download.
      perform setup_header.
      call function 'DOWNLOAD'
           exporting
                filetype                = 'DAT'
           tables
                data_tab                = it_download_as91
                fieldnames              = it_head
           exceptions
                invalid_filesize        = 1
                invalid_table_width     = 2
                invalid_type            = 3
                no_batch                = 4
                unknown_error           = 5
                gui_refuse_filetransfer = 6
                customer_error          = 7
                others                  = 8.
      if sy-subrc <> 0.
    write:/'Error in file Type'(097).
      endif.
    endform.                    " DOWNLOAD
    *&      Form  setup_header
          text

  • Stuck - load the Excel file dynamically with different columns and worksheet names

     I have a situation where I want to load the Excel file dynamically, and the excel file have different columns or even worksheet name. Any idea how I could
    approach this? I believe there's no way to modify the meta data (specifically the mapping) in the data flow.

    Hi Chimumu,
    The SSIS stock adapters don't supporting dynamic column mapping, to achieve your goal, you need to use Script Task/Component to read the Excel sheet name and the columns in the worksheet, and then map to the output columns of the script component. You can
    also refer to the following blogs:
    http://micktechblog.blogspot.com/2011/06/ssis-excel-import-with-unknown-number.html
    http://wikiprogrammer.wordpress.com/2011/04/08/dynamic-column-mapping-in-ssis-part-1/
    Regards,
    Mike Yin
    TechNet Community Support

  • Passing data to different internal tables with different columns from a comma delimited file

    Hi,
    I have a program wherein we upload a comma delimited file and based on the region( we have drop down in the selection screen to pick the region).  Based on the region, the data from the file is passed to internal table. For region A, we have 10 columns and for region B we have 9 columns.
    There is a split statement (split at comma) used to break the data into different columns.
    I need to add hard error messages if the no. of columns in the uploaded file are incorrect. For example, if the uploaded file is of type region A, then the uploaded file should be split into 10 columns. If the file contains lesser or more columns thenan error message should be added. Similar is the case with region B.
    I do not want to remove the existing split statement(existing code). Is there a way I can exactly pass the data into the internal table accurately? I have gone through some posts where in they have made use of the method cl_alv_table_create=>create_dynamic_table by passing the field catalog. But I cannot use this as I have two different internal tables to be populated based on the region. Appreciate help on this.
    Thanks,
    Pavan

    Hi Abhishek,
    I have no issues with the rows. I have a file with format like a1,b1,c1,d1,e1, the file should be uploaded and split at comma. So far its fine. After this, if the file is related to region A say Asia, then it should have 5 fields( as an example). So, all the 5 values a1,b1..e1 will be passed to 5 fields of itab1.
    I also have region B( say Europe)  whose file will have only 4 fields. So, file is of the form a2,b2,c2,d2. Again data is split at comma and passed to itab2.
    If some one loads file related to Asia and the file has only 4 fields  then the data would be incorrect. Similar is the case when someone tries to load Europe file with 5 fields related data. To avoid this, I want to validate the data uploaded. For this, I want to count the no. of fields (seperated by comma). If no. of fields is 5 then the file is related to Asia or if no. of fields is 4 then it is Europe file.
    Well, the no. of commas is nothing but no. of fields - 1. If the file is of the form a1,b1..e1 then I can say like if no. of commas = 4 then it is File Asia.But I am not sure how to write a code for this.Please advise.
    Thanks,
    Pavan

  • How to join two columns between two tables with different column names

    Hi
    How i can join 2 columns with different names between the 2 tables.
    Can any one please give solution for this.
    Thanks
    Manu

    Hi,
    basic understanding of joins:
    If you want to join 2 tables there should be matching column w.r.t. data and it's data type. You need not to have same column names in both the tables...
    so, find those columns which has got same values..

  • Scrollable table with fixed column headings problem

    Dear list members,
    A while ago I asked on this forum for a way to code a
    scrollable table with fixed headings and I was kindly given the
    HTML and CSS code to do that. Using the method I was given I coded
    the following simple test case. It works under IE but under
    Netscape the column headings scroll up instead of remaining fixed.
    The code works fine in IE. Can anyone tell me what I'm doing wrong
    or if there is a workaround.
    Thanks,
    Harry

    The method you were given will only work in IE because only
    IE understands
    "expression" in CSS rules.
    I'm afraid things are going to be a little more complicated
    for you, but
    it's not impossible.
    Give this method a shot:
    http://www.imaputz.com/cssStuff/bulletVersion.html
    "harryspier" <[email protected]> wrote in
    message
    news:e53s1a$dv9$[email protected]..
    > <style>
    > div .headings {position:relative;
    > top:expression(this.offsetParent.scrollTop);}
    > </style>

  • Set operations & tables with different columns

    I have a problem. I have 3 tables - Countries, Locations & Departments. I want to output the country_id and country_name from the countries tables for countries that have no departments. Locations has country_id and location_id columns and departments has location_id and department_id columns. All is in Database 11g. I can produce a table which gives me the locations with departments or without departments as follows:
    select location_id from locations intersect select location_id from departments;
    This gives me a list of locations with departments. Conversely I can get a list of locations without departments as follows:
    select location_id from locations minus select location_id from departments;
    However, to combine this output with the countries table I need to produce country_id in the output. However, when I try to add country_id to my code from above as follows:
    select country_id, location_id from locations intersect select to_char(null), location_id from departments;
    I get no rows found. I understand why. There is no intersection between country_id in locations and the null output from departments (where there is no country_id column). Alternatively, if I try as follow:
    select country_id, location_id from locations minus select to_char(null), location_id from departments;
    I get rows with every country_id whether they have departments or not. Again, I understand why. I am essentially subtracting nothing (the to_char(null) from departments) from the country_id column in locations and getting the entire country_id column as output.
    How can I use set operations to produce the country_id column? I also do not want to show the location_id problem.
    This problem is repeated when I try for the final country_id, country_name final output. The countries table has these columns. However, the locations table does not have the country_name column. It only has the country_id column. So a query such as this one:
    select country_id, country_name from countries intersect country_id, to_char(null) from locations;
    presents me with the same problem as above. The country_id column intersects nicely, but the country_name file does not intersect as it does not exist in the locations table. Again, how can I use set operations to produce the country_id and country_name columns.

    Hi,
    the method I outlined for you above should be fine. It doesn't matter that there are one-to-many relationships which may cause repeated output rows; set operations (except for UNION ALL ) always return distinct rows.
    Can you do a query on the countries table, that shows all countries?
    Can you do a query involving all 3 tables inner-joined, that shows the countries that are related to locations and departments? (Repeated rows are okay.)
    Then you can do a MINUS, to get only the countries that are not related to departments.
    If you get stuck, post a little sample data (CREATE TABLE and INSERT statements), the results you want from tha data, your best attemptat a query, and a description of the problem (including the full error message, if any).

  • Want to update a column with  different column of same table

    I have a table TEST_CDR which is having 250 millions records also having partition by hash.
    there are two column in this table ID and CDR_ID want to update ID in CDR_ID but it take too much time like 24 hours or more.
    please suggest me a simple way.

    Hi,
    You can try this. but be careful about your backups and go through CTAS,nologging and parallel concepts...
    Please refer this link.
    http://www.dba-oracle.com/t_fast_batch_updates_ctas.htm
    http://www.dba-oracle.com/t_nologging_append.htm
    http://www.dba-oracle.com/t_efficient_update_sql_dml_tips.htm
    http://eriglen.blogspot.in/2011/08/ctas-create-table-as-select-with.html
    1.CTAS with nologging and parallel..
    SQL> create table test_cdr_1(id,cdr_id) nologging parallel as select id,id from test_cdr;
    2.rebuild indexes, triggers and constraints to test_cdr_1
    3.rename test_cdr to bkup_test_cdr;
    4.rename test_cdr_1 to test_cdr;
    Regards,
    ragunath.

Maybe you are looking for