Mails are not generated in background Jobs and not shown in SOST.

Dear All,
I have facing issue regarding to system mails. I want to send mails the various reports automatically from SAP System to different recipients. So I scheduled that reports at background and in their spool list recipient I have added distribution list.
But that mails are not generated, it is not shown in transaction SOST also. When I send mails manually it goes successfully to only our company domain recipients. But not other domains. How should I resolve this problem?
Please help me out.
Thanks in advance.
Amit

Hi Srihari,
I have checked the background jobs they showed it finished. Following logs are shown in job logs. Is problem is due to 3rd log??
18.03.2012 14:23:34 Job started    00           516          S
18.03.2012 14:23:34 Step 001 started (program RFITEMAP, variant PDC FARMAR, user ID DEVELOPER1)      00           550          S
18.03.2012 14:23:37 No items selected (see long text)                                              MSITEM         033          I
18.03.2012 14:23:42 Spool request (number 0000026302) created without immediate output               SY           355          S
18.03.2012 14:23:46 Job finished                                                                     00           517          S
When I saw further details of 3rd log it following message.
No items selected (see long text)
    Message no. MSITEM033
Diagnosis
    No line items meeting your selection criteria could
    be for the following reasons:
    1.) No corresponding items have been posted.
    2.) You are not authorized to display this data.
    3.) The items have already been archived.
Please help me out.
Thanks
Amit

Similar Messages

Spool not generated in BAckground Job

Hi,
I am trying to schedule RSNAST00 in a background job. My problem is that when the job gets finished i cannot see a spool for the output, any pointers to this issue will be appreciated.
Regards,
Sharadendu

Go to transaction SM37 and check job log.
It is possible that something is going wrong in your program. I would suggest you to debugg background job.
To debugg just select job in SM37 and in command window(Where we type T codes) type JDBG and press enter. This will open debugger. Press F7 for approx 4-5 times. Now your program will be opened in debugg and you check why spool is not generated.
let me know ig this helps.
Regards,
Jigar Thakkar.

Spool not generated for background job

Hi all!
I have a Zprogram that does some validation and submits the data to transaction ME59 using SUBMIT statement. The program is running fine in foreground.When it is scheduled for background, the spool is not getting generated. I know that if a program contains SUBMIT statement, the spool will not be generated when run in background. But is there a way to make it work? The client requires the exact output that we get in foreground.

Hi,
All spool requests will be stored in TSP01 table
TSP01 - Spool Requests
field name for Spool request number is RQIDENT
Hi,
Take a look at OSS Note 422136 which states:
"2. You can only store one spool request even if a step generates several spool requests during processing. The application is responsible for a "spool overview" in this case. If a step generates several spool requests during processing, only one request can be stored. In this case, the application report should issue the number with a message when writing a spool request so that it is then displayed in the job log."
Also take a look at OSS Note 519059 which further supports the case that you must capture the individual spool numbers as they are being created (i.e. within the job step's program). The note contains the following:
8] Question: How are the spool requests assigned?
Answer: The step information is stored in table TBTCP. This has space for exactly one spool request (field LISTIDENT). If a step generates several spool requests during the processing, only one can be stored. In this case the application is responsible for a "spool overview
<b>Reward points</b>
Regards

All my e-mails are going to my deleted box and not my inbox, what do I do?

Since last Saturday any messages sent to me are going straight to my deleted box. Nothing is appearing in my inbox.

That is almost always the result of a problem with anti virus software, or more specifically the spam tool that they include. I am not sure if I am just more sensitive to this, but McAfee just keeps popping up as the anti virus in question.
What anti virus do you use?

Automatic Mail not getting generated through background job

Hi Experts,
We have set up a job variant with spool recipients. We are getting the automatic mail if the job is getting finished successfully. But we are not getting the automatic mail if the job is in cancelled status. Earlier we used to get the mail even if the job is in cancelled status. We are not sure if there is any setting which would restrict the automatic mail based on the job status.
Appreciate your help in this regard.
Thanks and Regards,
Ranjani.

Hi,
Just for a work around, try checking the SAP user inbox for the user who has scheduled the background job.
I don't there is any seperate configuration in Spool List Recipient for the canceled jobs. We need to confirm that the email ids provided in the Spool List recipient are correct and the background job creates a spool request even if it is canceled.
Also if possible try deleting the existing background job and create a new background job with the same parameters and valid email id's maintained in the Spool List recipient.
OR
Without deleting the existing background job, parallely create a new background job with the same parameters and valid email id's maintained in the Spool List recipient. If it works then delete the old background job.
Thanks
Harish

BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

Hello,
To generate the log report, /VIRSA/ZVFATBAK program is scheduled on hourly basis but some time report doesn't get generated and if we see the background job then it shows sucessfully finished.
If we see the maually the log report for FFID then below error message is displayed.
" BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED"
Can anyone guide me to solve the issue.
Thanks in advance.
Best Regards,
Prashant Dubey

Hi,
once chk the status of the job by selecting that and check job status(cltr+shift_f12)
since it was periodically scheduled job there will be a RELEASED job after every active job..
so try to copy that into another job using copy option and give some new name which u have to remember...
the moment u copy u can find the same copied job in SCHEDULED status...
from here, try to run it again on hourly basis....
After copying the job u can unschedule the old released job to scheduled otherwise 2 will run at a time...
rgds,

Run the Report as a Background job and Get the Output in Excel in Local PC

Hello Gurus,
I have one following requirement.
One should be able to run the report as a background job and it should be possible to get the report in Excel format, also when running the report in background. The excel report should have the same information and look as the current SAPreport.
Please provide some solution.
Any helpful answer get surely awarded.
Thanks a lot,
Varlanir

GUI_* WS_* Function In Background, CSV Upload
GUI_* and WS_* function modules do not work in background
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
*-- Open dataset for reading
DATA:
dsn(20) VALUE '/usr/test.dat',
rec(80).
OPEN DATASET dsn FOR INPUT IN TEXT MODE.
IF sy-subrc = 0.
DO.
    READ DATASET dsn INTO rec.
    IF sy-subrc <> 0.
      EXIT.
    ELSE.
      WRITE / rec.
    ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET dsn.
*-- Open dataset for writing
DATA rec(80).
OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
TRANSFER rec TO '/usr/test.dat'.
CLOSE DATASET dsn.
What is the difference when we use upload, ws_upload, gui_upload function modules?
UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts. ie., Batch Data Communication.
Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3. So , in these various Function Modules are used.
UPLOAD--- upload a file to the presentation server (PC)
WS_UPLOAD----    Load Files from the Presentation Server to Internal ABAP Tables.
WS means Work Station.
This is used upto SAP 4.6 version.
GUI_UPLOAD-------    Replaces WS_UPLOAD. Upoad file from presentation server to the app server. From 4.7 SAP version it is replaced.
How to Upload csv file to SAP?
Common File Download Upload Questions:
How you upload the data from text file to sap internal table? From my knowledge its by upload or gui_upload.
How you download the data from sap internal table to text file?
How you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
Use function module GUI_UPLOAD
The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
   FILETYPE                      = 'ASC'
TABLES
    DATA_TAB                      = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.

Find out particular printers that are being used by background jobs.

Find out particular printers that are being used by background jobs..
Hi Gurus,
I have to remove some printers from SPAD, but before removing those printers I have to make sure that those are not being used by any background jobs. The table TBTCP can be used to identify which jobs are still using those printers, but this is a tedious process.
Any input would be highly appreciated.
Thank you
Adil

Hi Adil,
I'm lazy so I'd just run this SQL
select distinct(jobname), pdest from SAPSR3.TBTCP where PDEST in ('LP01', 'LOCL') ;
Just put the printers you want as shown above and just perform a little manual cross check by checking the job in SM37.
And that's it .....
Cheers,
Amerjit

Differences in Background jobs and Dialog jobs

Hi everyone,
I am new to SAP and would like a little clarification regarding what is meant by Background jobs and Dialog jobs/processes. We had a situation at our client location where the system got completely bogged down to the point that it almost froze and many of the process chains were failing in BI. As per the basis team, the jobs were triggered as "dialog jobs" instead of "background" jobs which caused a heavy load on the system.
What is the difference? What happens when the jobs are run in the background or as dialog? Can both be checked in SM37?
Points will be awarded
Thanks.

**Dialog Work process:** The Dialog work process fulfill all requests for the execution of dialog steps triggered by an active user. The dialog work process are not used for request which take long time and which use more cpu. Every dispatcher requires at least two dialog work processes. The dialog work process default time is 300 secs. If the dialog work process does not respond in this time, it will be terminated. Also dialog work process are multiplexed to handle large no of user request.
**Background Work process:** The background work processes execute programs that run without user interaction. At least two background work processes are required per SAP system. More than one background work processes can be configured per dispatcher. Usually the background work process are used for carrying jobs that take long time to finish, like client copy, client transport etc.., . There are two types of background work process. They are A type and B type. A type background work process are used for mission critical jobs. Background jobs of priority a have high priority than B type back ground jobs.
you can check your job using tcode SM50.
Thanks
Dhiraj

Rule set import - Background job did not run

Hi,
I am setting up my CC 5.2 production system. I have downloaded from ruleset from the dev CC and imported it into production. However the background job generated did not run. I am implementing SAP note 999785 to fix this, but am wondering what should I do about the rule set? Do I need to delete the rule set and reimport it? As this background job did not run I notice that the permission rules did not generate.
Any advice is welcome.
Thanks

Hi,
as the backgorund job never ran and no rules were created, I can just reimport the ruleset and let the job run. I have tried this and the rules were created successfully

Different Subroutines in Background jobs and Dialog jobs

Hi guys,
I want to execute some subroutines when the program is running using a background job , and some other subroutines completely different when the user use dialog job ( program -> execute in background ) . I know that sy-batch = 'X' in both cases , but, there is something else to identify them ? , any ideas .
thank you .

It will be - he meant that they start the background job from SE38/SA38 not run it online.
SY-SLSET is a starter point for checking the variant used - dynamic variants are used when you don't pick one from the list. However, this would not help if the user picked a variant and then scheduled the job dynamically. Another option is to use function GET_JOB_RUNTIME_INFO in your program. Assuming your scheduled jobs are named differently, you can check for the condition by checking the name of the running job. Dynamically created jobs will have the program name as the job name.

WHICH TABLE STORES SPOOL REQUEST GENERATED BY BACKGROUND JOB ?

Background job is generating multiple request.
i am not able to find the table which stores all the spool request for a particular background job.

i know the table for spool request : TSP01
But how should i link it to background job name ?
i want the link between background job name and spool request generated by it......
TBTCPV is the view but it stores only one spool request.....rather than multiple spoolreq generated by background job..

Retrieve cancelled background job and display it user on the selection scre

Hi all,
i am executing a background job and if successful it sends an email to the user .
if the job gets cancelled i want to display the job status to the user or email the user .
can anyone share your experiences on this .
thanks in advance.
regards,
Ry

U can use the FM 'BP_JOBLOG_READ' for the aborted jog to get their status log..then u can send this log to the user via mail.
pl. check this sample code..
REPORT ZEXAMPLE.
DATA: JOBLIST LIKE TBTCJOB OCCURS 0 WITH HEADER LINE,
      JOBDETS LIKE BTCSELECT,
      JOBLOG LIKE TBTC5 OCCURS 0 WITH HEADER LINE,
      V_ANS.
PARAMETERS P_UNAME LIKE SY-UNAME DEFAULT SY-UNAME OBLIGATORY.
IF NOT P_UNAME IS INITIAL.
JOBDETS-JOBNAME     = '*'.
JOBDETS-USERNAME    = P_UNAME.
JOBDETS-FROM_DATE   = SY-DATUM.
JOBDETS-TO_DATE     = SY-DATUM.
JOBDETS-NO_DATE     = 'X'.
JOBDETS-WITH_PRED   = 'X'.
JOBDETS-PRELIM      = 'X'.
JOBDETS-SCHEDUL     = 'X'.
JOBDETS-READY       = 'X'.
JOBDETS-RUNNING     = 'X'.
JOBDETS-FINISHED    = 'X'.
JOBDETS-ABORTED     = 'X'.
ENDIF.
CALL FUNCTION 'BP_JOB_SELECT'
     EXPORTING
          JOBSELECT_DIALOG    = 'Y'
          JOBSEL_PARAM_IN     = JOBDETS
     TABLES
          JOBSELECT_JOBLIST   = JOBLIST
     EXCEPTIONS
          INVALID_DIALOG_TYPE = 1
          JOBNAME_MISSING     = 2
          NO_JOBS_FOUND       = 3
          SELECTION_CANCELED = 4
          USERNAME_MISSING    = 5
          OTHERS              = 6.
IF SY-SUBRC EQ 0.
IF NOT JOBLIST[] IS INITIAL.
    READ TABLE JOBLIST INDEX 1.
    CALL FUNCTION 'BP_JOBLOG_READ'
         EXPORTING
              JOBCOUNT              = JOBLIST-JOBCOUNT
              JOBNAME               = JOBLIST-JOBNAME
         TABLES
              JOBLOGTBL             = JOBLOG
         EXCEPTIONS
              CANT_READ_JOBLOG      = 1
              JOBCOUNT_MISSING      = 2
              JOBLOG_DOES_NOT_EXIST = 3
              JOBLOG_IS_EMPTY       = 4
              JOBLOG_NAME_MISSING   = 5
              JOBNAME_MISSING       = 6
              JOB_DOES_NOT_EXIST    = 7
              OTHERS                = 8.
    IF JOBLOG[] IS INITIAL.
      WRITE:/ 'NO JOB LOG FOUND'.
    ELSE.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
           EXPORTING
                TITLEBAR      = 'DELETE JOB LOGS'
                TEXT_QUESTION = 'JOB LOGS FOUND. DELETE?'
                POPUP_TYPE    = 'W'
           IMPORTING
                ANSWER        = V_ANS.
    ENDIF.
    IF V_ANS EQ '1'.
      CALL FUNCTION 'BP_JOB_DELETE'
           EXPORTING
                JOBCOUNT                 = JOBLIST-JOBCOUNT
                JOBNAME                  = JOBLIST-JOBNAME
           EXCEPTIONS
                CANT_DELETE_EVENT_ENTRY = 1
                CANT_DELETE_JOB          = 2
                CANT_DELETE_JOBLOG       = 3
                CANT_DELETE_STEPS        = 4
                CANT_DELETE_TIME_ENTRY   = 5
                CANT_DERELEASE_SUCCESSOR = 6
                CANT_ENQ_PREDECESSOR     = 7
                CANT_ENQ_SUCCESSOR       = 8
                CANT_ENQ_TBTCO_ENTRY     = 9
                CANT_UPDATE_PREDECESSOR = 10
                CANT_UPDATE_SUCCESSOR    = 11
                COMMIT_FAILED            = 12
                JOBCOUNT_MISSING         = 13
                JOBNAME_MISSING          = 14
                JOB_DOES_NOT_EXIST       = 15
                JOB_IS_ALREADY_RUNNING   = 16
                NO_DELETE_AUTHORITY      = 17
                OTHERS                   = 18.
      IF SY-SUBRC EQ 0.
        WRITE:/ JOBLIST-JOBCOUNT, JOBLIST-JOBNAME, 'LOG DELETED'.
        EXIT.
      ELSE.
        WRITE:/ JOBLIST-JOBCOUNT, JOBLIST-JOBNAME, 'LOG NOT DELETED'.
      ENDIF.
    ELSE.
      CALL FUNCTION 'BP_JOBLOG_SHOW'
           EXPORTING
                JOBCOUNT                  = JOBLIST-JOBCOUNT
                JOBNAME                   = JOBLIST-JOBNAME
           EXCEPTIONS
                ERROR_READING_JOBDATA     = 1
                ERROR_READING_JOBLOG_DATA = 2
                JOBCOUNT_MISSING          = 3
                JOBLOG_DOES_NOT_EXIST     = 4
                JOBLOG_IS_EMPTY           = 5
                JOBLOG_SHOW_CANCELED      = 6
                JOBNAME_MISSING           = 7
                JOB_DOES_NOT_EXIST        = 8
                NO_JOBLOG_THERE_YET       = 9
                NO_SHOW_PRIVILEGE_GIVEN   = 10
                OTHERS                    = 11.
    ENDIF.
ELSE.
    WRITE:/ 'NO JOBS FOR', P_UNAME.
    EXIT.
ENDIF.
ENDIF.
Regards,
Joy.

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

Background Job is not running in KW

Hi All,
I have problem with background job.
I am working on Knowledge warehouse server.
And I am scheduling background job to upload contents.
But background job is not finishing at proper time.
And while displaying trace it is giving following error.
ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c   1251]
Please help me to resolve this.
Regards,
Payal patel

Hi Juan,
I have tried with process as well as instance restart.
It didn't help me.
Hi Santosh,
Following is the part of trace file (level -2).
First line shows error.
Tell me if you need any other log file.
L *** ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c   1251]
M read msgserver-list from MBUF
M ThSemRq (4, 1, 0, 0)
M ThSemRel (4, 1)
M ThSetBtcName: found batch server sapbl4_KW7_00
M ThScheduler2: server name: sapbl4_KW7_00
M ThISendMsg: send message (5) to server (wp) with name >sapbl4_KW7_00                           <
M ThISndName: send to name: >sapbl4_KW7_00                           <
M ThISend: (tm/type/info = 10/0x2000/0x0, mode_deleted=0)
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat (type=0x2000, task_switch=0, inline_hold=0, hand_shake=0, debug=0, ..)
M ThNewWpStat: new state of T10/M0 = 0x3c
M ThISend: new wp stat: 0x0
M Adresse   Offset Message by name (one way)
M -
M 06C60600 000000 00000000 05000000 255f4556 454e545f |........%_EVENT_|
M 06C60610 000016 53434845 44554c45 52202020 20202020 |SCHEDULER       |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 180
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 19358)
M -OUT- sender_id WORK_PROCESS      tid 10    wp_ca_blk   180     wp_id 10
M -OUT- action    SEND_MSG_ONEWAY   uid 11    appc_ca_blk -1      type NOWP
M -OUT- new_stat NO_CHANGE         mode 0     len         268     rq_id 19358
M -OUT- forward   DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M nihsl-getHostAddr: got hostname 'localhost' from operation system
M nihsi-getHostAddr: hostname 'localhost' = addr 127.0.0.1
M nihsl-getServNo: got servicename 'sapdp00' from operation system
M nihsi-getServNo: servicename 'sapdp00' = port 0C.80/3200
M NiIInitSocket: set default settings for socket 1196
M NiCreateHandle: state hdl 1 / socket 1196 NI_INITIAL
M NiIDgSend: init datagram send hdl 1 / socket 1196
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: connect dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M NiIDgsend: sending on connected datagram-handle
M LOCK WP ca_blk 181
M ThResFree: free resources of U11 M0 I2 (normal mode, complete free) at level 3, errno=23, db_action=TH_DB_NO_ACTION, pooling=1
M ThResFree: reset spa state for user T10/U11/M0
M ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M SosSearchAnchor: search anchor for 2
M PfStatDisconnect: disconnect statistics
M ThDealComm: del 1 cpic conn(s) of T10/U11/M0 (errno/deal_r2/free_level = 23/1/3)
M ThCPICFree: send DEAL to U11/M0
M ThICMDEAL (14030609, ..)
M ThCPIC: execute cpic func DEALLOCATE
M ThCPIC: last_ftype/last_timeout/last_requested_length/last_receive_data 1/-1/-1/0
M ThCPIC: allowed rq_type of T10/M0 = TH_APPC_RC_RQ
M ThConnectToLocGw: connect to local gateway
M GwConnectSapWp: connect to gateway >localhost< >sapgw00<
M nihsl-getHostAddr: found hostname 'localhost' in cache
M nihsi-getHostAddr: hostname 'localhost' = addr 127.0.0.1
M nihsl-getServNo: got servicename 'sapgw00' from operation system
M nihsi-getServNo: servicename 'sapgw00' = port 0C.E4/3300
M NiCreateHandle: state hdl 2 / socket -1 NI_INITIAL
M NiIBlockMode: switch off block-mode for hdl 2 / socket -1
M NiLowLevCon: connect to: host 127.0.0.1, port 0C.E4/3300, fam 2 (low adr..high adr)
M NiIInitSocket: set default settings for socket 1140
M NiISocket: hdl 2 got socket 1140
M NiPConnect: connect in progress
M SiPeekPendConn: connection of socket 1140 established
M NiLowLevCon: took local port 0E.51/3665
M nilh-localCheck: using local address list
M NiSetStat: state hdl 2 NI_CONNECTED
M NiIWrite: write 64, 1 packs, MESG_IO, hdl 2, data complete
M NiIPeek: peek successful for hdl 2 / socket 1140 (r)
M NiIRead: read 64, 2 packs, MESG_IO, hdl 2, data complete
M GwConnectSapWp: connect to gateway localhost / sapgw00 (pid = 6184) o.k.
M ThISend: (tm/type/info = 10/0x80/0x0, mode_deleted=0)
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat (type=0x80, task_switch=0, inline_hold=0, hand_shake=0, debug=0, ..)
M ThNewWpStat: new state of T10/M0 = 0x3c
M ThISend: new wp stat: 0x0
Regards,
Payal Patel
Message was edited by:
        Payal Patel

Mails are not generated in background Jobs and not shown in SOST.

Similar Messages

Maybe you are looking for