Mainstage 2.2.2 with 10.68 and mountain lion

I currently use Mainstage 2.1.3 on Snow Leopard, for live performances, and it works great. I am curious about either upgrading to Mainstage 2.2.2 and/or Mountain Lion. I am afraid of issues coming up from either or both upgrades. I also use Logic Pro 9.1.8 and Sebelius. Are my fears unfounded or is there a reason I should stay away from either or both upgrades?

http://roaringapps.com/apps:table

Similar Messages

Does anyone know of any issues with photoshop CS4 and Mountain Lion?

Does anyone know of any issues with photoshop CS4 and Mountain Lion?

See here:
http://www.macrumors.com/2012/07/25/adobe-and-avid-report-only-minor-issues-with -mountain-lion/

Isolated dual boot with OS mavericks and mountain lion

I just created a dual boot between mavericks and mountain lion (1 physical drive with two partitions) but I'm having troubles where they each see each other. Bin/ lib/ etc are fine (i think) as they are added via environment vars but it seems as though the spotlight privacy directories are shared. For instance, I thought I could simply add the other partition to the Spotlight Privacy list, ie while using mountain lion add /Volumes/Mavericks to the privacy list. However, when I added the volume in one, it also appears in the other. Another issue I've encountered is that while compiling on ML, I was getting errors complaining about the 10.9 sdk.
So, can anyone advise on the proper way to isolate these two operating systems with a dual boot scenario?
Thanks
Adam

Create two partitions on the hard drive. Install each OS on its own partition. This will only work if the computer can be booted from either version.

XServe with Snow Leopard and Mountain Lion Clients

Okay, bare with me, as I'm fairly new to the whole Mac Server world. I have learned a whole lot over the last year and I've been able to completely manage our 60 Snow Leopard Clients on our XServe.
Last year, I came into an existing setup with ~60 clients running Snow Leopard and an XServe running on Snow Leopard. We utilize Server Admin and Workgroup Manager to manage our user accounts and our clients. We have over 300 users and utilize Portable Home Folders with our accounts.
Over the last year, I've learned a whole lot about managing the system that is already setup. I've made quite a few preferences and file structure changes utilizing Server Admin and Workgroup Manager. After getting new hard drives in three machines, I learned how to re-image them and get them set back up with our Workgroup Manager. I learn things pretty quickly and have a pretty high technology aptitude.
So, here is the predictament I'm in now...our county just purchased 31 new Macs to add to our network. These are running Mountain Lion.
I have a few questions, and I'm not exactly sure where this post should have been. I think the major questions/issues I face right now include:
Will I be able to manage the Mountain Lion clients utilizing our existing server and Workgroup Manager?
We need our server to work seemlessly with the 31 Mountain Lion clients and the 60 Snow Leopard Clients.
Once I get one machine setup correctly, I need to create an image of it so that I can then utilize this image on the other 30 machines.
How do I create an image and then deploy it?
Do I complete this step before or after I have setup the first client with Workgroup Manager?
Also, am I missing something? I just want to make sure I'm not missing anything important in regards to getting these new workstations setup on our network.
Thank you so much for all your help! Any information you provide is much appreciated.

No, you don't need an new license.
But the Mac App Store doesn't allow you to download software, which you originally bought on DVD. Logic Studio is/was only available on DVDs, while Logic Pro, MainStage and Compressor are available in the Mac App Store as inidivdual applications.

HT201514 Trying to back up Time Machine to My Passport Air external hard drive, which is supposed to be compatible with my iMac and Mountain Lion, but get the message: Unable to complete backup. An error occurred while creating the backup folder. Help!

Hello, I've just bought a Mac compatible Passport Air external hard drive, which is supposed to be compatible with the OS I am using (Mountain Lion) but I keep getting an error message saying Unable to complete backup. An error occurred while creting the backup folder. I've tried all the help suggestions, but nothing with this actual message comes up - it appears to be partititioned correctly etc, so don't know what I'm doing wrong - any help would be greatly appreciated thank you.

Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

Mouse problems with Illustrator CS6 and Mountain Lion

The mouse in Illustrator selects and deselects as it moves over buttons and cells:
1. In Graph data the cells the mouse passes over go dark grey if not already selected, then deselect if they are selected. This makes it very difficult to use the data cells.
2. In Layers window, where I may have 100s of layers, I want to hide one layer or more which are not necessarily adjacent to each other. Illustrator hides all of the layers it passes. It is very difficult to click and unclick the show/hide button (and also the lock button). Ditto with show or unlock toggle layer. I had to start up in Lion in which Illustrator does not have this problem in order to get a job finished in time.
Seems there needs to be a fix for Illustrator to work properly in Mountain Lion.
Has anyone found such a fix?

No I don't have Right-Zoom (don't know what it is), but I have the same problem with Apple's Track Pad, which I don't use much and I only use the inbuilt software.
I use Kensington Slim Blade and before that LogiTech's marble mouse and both need their software to work properly.
All of them work fine in Lion and earlier. Could it be that Adobe has overlooked some new aspect that’s in Mountain Lion which, in my case, needs to be fixed for Illustrator?

Canon iR7105, iR-ADV9065 with GX300 server, and Mountain Lion

I am having no luck setting up two relatively recent, large and expensive Canon printers in Mountain Lion. The situations are different so there are two chapters to this wall of text.
This is a fresh Mac, so it didn't have any 'old' Canon driver trash on it. I have installed UFRII 2.43 and PS 3.60 from Canon and restarted.
The iR7105
The iR7105 doesn't show up automatically in the Print & Scan add-printer menus. No problem; I go to IP, using LPD, and set it up there. (LPD access is enabled in the printer.) After that, I have tried setting it up with each of three drivers: a nondescript Canon iR7086-7105, Canon iR7086-7105 PS (US), and Canon iR7086-7105 UFR II (US).
The nondescript driver results in no setup options for the printer, so I know there's a problem. This is, however, the closest to a successful setup I have so far. In the print dialog I get finishing options that seem promising, including for our saddle finisher. However, the saddle finisher doesn't engage when I send the print job -- I have to assume this is because the print driver doesn't have a setup where I can tell it what model of finisher it needs to talk to? Further, there are no options for printing to the printer's Mail Boxes, so I can't just send a file there and fix up the saddle stitch on the printer directly (a workaround we've used with various jobs in the past). However, after the job has run, I CAN go into Command Workstation 5.4.1.25 and adjust the settings on the job there, and then get it to run through the saddle finisher (or to the Mail Boxes). This is the best I have so far, but it's not very good.
So I try to set up the PS driver. Now I get setup options and I can select the saddle finisher model. I also get a popup asking about unidirectional or bidirectional; I choose bidirectional because the printer is on a network. Also, setting it to unidirectional doesn't change what happens next: when I do send the print job, the printer cheerfully spits out a dozen or more pages of single-line garbage instead of what I sent to print.
On to the UFR II driver. Again I get setup options as expected when I set up the printer. Again, the print options are exactly what I expect as well. Unfortunately, the print job doesn't go through: I get an error that says, "Canon UFR II Printer Driver / Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again, then start Printer Utility to get the printer information." Well, the printer is pretty certainly connected, based on the performances above. It's also supported, if Canon's suggesting I should download and use this driver is any indication. Finally, Printer Utility gets printer information that looks quite accurate. Nevertheless, after all of that, actual attempts to print still get the UFR II Printer Driver error message, and no prints.
The iR-ADV9065 and its GX300V2.0US server
After installing all the Canon drivers mentioned above, the print server (Canon iR-ADV C9000s GX300V2.0US) shows up in the '+' drop-down in Print & Scan. Great, right?! I can configure the server directly and control the printer that way! Yay!
Nope. I get a warning: "Some of the software for the printer is missing. You may have to reinstall the software to be able to successfully print." I click Continue, since that's an option, and then I get "Setting up 'Canon iR-ADV C9000s GX300V2.0US...' The software for the printer was installed incorrectly. Please reinstall the software from the manufacturer." This time there is no option except Cancel.
What would be awesome now would be to know what software I need to reinstall. Since I just installed the UFRII and the PS software on a fresh Mac, I'm not sure what's missing.
So, back to manually installing with the IP address. From this point forward the results mimic those above, with variations for the printer's specific capabilities. The best driver option is still the non-PS, non-UFR version, and that 'best' option still won't control the finishing units. I must go through Command WorkStation to accomplish that.
Bottom Line
Because I am so close to having these set up properly, but not quite, I feel like I must be doing something wrong. Something small and subtle, probably, but hey, maybe it's something big and glaring! Can anyone help?

mapinoregon wrote:
The iR7105
The iR7105 doesn't show up automatically in the Print & Scan add-printer menus.
The Canon print controllers do not support Bonjour, so using IP > LPD as you have done is the correct procedure.
mapinoregon wrote:
The iR7105
The nondescript driver results in no setup options for the printer, so I know there's a problem.
There's no problem. This is how the PPD works on 10.8. For older versions of PPD it was necessary to configure the options. But with the latest versions of PPD, it is assumed that all options are available, even when the machine may not have them or supports them.
mapinoregon wrote:
The iR7105
In the print dialog I get finishing options that seem promising, including for our saddle finisher. However, the saddle finisher doesn't engage when I send the print job -- I have to assume this is because the print driver doesn't have a setup where I can tell it what model of finisher it needs to talk to?
It is not a lack of being able to set what finisher you have installed. You just cannot saddle-finish with the PPD. This is only supported with the full driver, such as the UFR2 or PS, because you need the additional plugins that are included with these full drivers to get the additional functions.
mapinoregon wrote:
The iR7105
Further, there are no options for printing to the printer's Mail Boxes, so I can't just send a file there and fix up the saddle stitch on the printer directly (a workaround we've used with various jobs in the past).
Again, this is due to the lack of a plugin to support the submission to the mailbox. So it is another limitation of the PPD.
And with you sending the print job to the mailbox in the past, you would have been using a full driver - not the PPD - to achieve this.
mapinoregon wrote:
The iR7105
However, after the job has run, I CAN go into Command Workstation 5.4.1.25 and adjust the settings on the job there, and then get it to run through the saddle finisher (or to the Mail Boxes). This is the best I have so far, but it's not very good.
If you can connect to the iR7105 with Command Workstation, then you must have a Fiery connected to it, such as the imagePASS-S2. So this would explain why the UFR2 and Canon PS v3.60 driver did not work. The Fiery does not support either driver. They are for the iR7105 that is using its internal Canon controller. Not the optional imagePASS (Fiery).
Now the issue for you with the imagePASS-S2 is that no 10.8 driver exists - the iR7105 was released in mid 2006. So you will have to use the Fiery Express driver, which has limited functions but it is better than using the Generic Postscript driver.
mapinoregon wrote:
The iR-ADV9065 and its GX300V2.0US server
After installing all the Canon drivers mentioned above, the print server (Canon iR-ADV C9000s GX300V2.0US) shows up in the '+' drop-down in Print & Scan. Great, right?! I can configure the server directly and control the printer that way! Yay!
Nope. I get a warning: "Some of the software for the printer is missing. You may have to reinstall the software to be able to successfully print." I click Continue, since that's an option, and then I get "Setting up 'Canon iR-ADV C9000s GX300V2.0US...' The software for the printer was installed incorrectly. Please reinstall the software from the manufacturer." This time there is no option except Cancel.
Like the iR7105 with the Fiery attached, the GX300 connected to the ADV C9065 does not support the UFR2 or PS v3.60 driver. But at least there is a 10.8 driver available for this model. Here is a link to the GX300 page from Canon USA.
Now with this driver installed you can add it by selecting the "Canon iR-ADV C9000s GX300V2.0US" that appears in the Default Add Printer view (and the Nearby Printers window). The driver should be automatically found by the Mac, meaning the Use menu will be set to the correct driver. This will let you print and use most finishing features of the iR ADV C9065.
Hope the above helps you. Reply if you need more info.

Driver Problems with CanoScan 9000F and Mountain Lion?

I have recently taken delivery of a MacBookPro with Mountain Lion. I used Migration Assistant from an older MacBook and all seems to have gone well except for my CanoScan 9000F. This refused to load the MP Navigation software, even though I downloaded the latest drivers. I am a heavy user of the Scanner as I move towards a Paperless Office .
Does anyone have experience of this combination of Scanner and Lap Top? Thank you.

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Get Airtunes to work with Apple TV and Mountain Lion

Hi there,
I know there are tons of people complaining that the new Airplay Mirroring doesn't work with their later than mid 2011 Mac running Mountain Lion. My complaint is I just want to be able to use my apple TV with my Itunes library. After my upgrade my apple TV2 can't find my Itunes library. I don't care about the mirroring feature, that's why I bought an AppleTV, but without access to the library I can't play anything. Is there any way to get just Airtunes to work? Are there any setup tricks I could do to make it work? On the ipad and the iphone I see the option to pair my devices with a 4 digit code in itunes but the apple TV only works through my Apple ID. this seems to make my ipad and iphone not work.
I have a 2010 iMac and a AppleTV2. I just want to be able to browse my library on my itunes. Sometimes it will work for short period of time after several resets on both machines but it never lasts.
Some one please help!

1. Insure home sharing is turned on both apple tv & the iPad - same account
2. When playing video or audio look for the little square usually lower left corner press it and select
Apple tv!
3. For mirroring double press home button (or multi finger slide up) scroll
All the way to the left & turn on AirPlay and choose mirroring!

Print size problems with Epson R3000 and Mountain Lion

I am using Mountain Lion on a 2008 MBP and an Epson R3000 printer. I can not get prints to size to my paper. In aperture I am choosing custom since there is no option for 11.7X16.5. I have set the print size to the same and still it does not work. I tried both landscape and portrait but that did not work.

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

How do I restore email settings with Time Machine and Mountain Lion?

Like so many others, I have tried to follow suggestions of going to Library/Preferences/com.apple.mail.plist.
It does not exist. and it does not show up in any search. Here is a shot of my Finder... it's not there in Preferences.

to make your user library visible, in Finder hold down the option/alt key while selecting the Go menu item. Select Library.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

Anyone having printer problems with adobe cs5 and mountain lion

I can print one copy in adobe cs5 but if I hit the print button it shuts down the program. Anyone having this problem besides me?

Are the drivers for your printer are up to date? You probably can print one copy cause it doesn't access the option window in your application.

Logic and Mountain Lion

i recently bought a new 15" retina/mountain lion laptop after researching to be sure that i would be able to use the existing software that i have.
Logic being the most important that i use. i saw there was issues with Loci 8 and mountain lion, and that upragind to Logic 9 would solve the issue.
there is a GREATER issue than that. i CAN NOT install Logic 8 on my new machine.
HOW DO I USE THE ABILITY TO UPGRADE WHEN I CAN INSTALL MY ORIGINAL PURCHASED COPY. i have two weeks left, if the only solution offered to fix this is to BUY Logic 9 after spending as much as i did on the machines and software....this machine will be going back and might have to reconsider the whole apple thing.
someone please help me out. i REALLY dont wanna change machines again.
thanks
pete

Intriguing, someone left it on "works fine" on http://roaringapps.com/app:402 for both Lion and Mountain Lion on version 7.2.3, yet when you look at the versions 7, 8, and 9 of Logic Express under the Versions section of the website, nobody was able to get it to work. Given that is the case, I edited the status to "some problems." I'll ask your post get redirected to the Logic Express forum to get the facts.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leaopard on one drive and Mountain Lion or Lion on others?

I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leopard on one drive and Mountain Lion or Lion on others?
I need to keep Snow Leopard so that I can run some old softward.

If you are careful you can put at least two on one drive, having Recovery from Lion and Mountain Lion on their own drives though.
CCC can clone Lion Recovery - great for moving or backup.

Mainstage 2.2.2 with 10.68 and mountain lion

Similar Messages

Maybe you are looking for