Maintain SAP Server through Browser--Authorisation

i want to maintain the server through browser
i have added the java installation aslo
when i login to the browser wiht j2ee_Admin i am not able ot create user
when i login wiht sap* i dont have authorisation
When i login through j2ee_Admin also it is taking me to client 000
Where can i give the option to take me to client 100
Pls tell me how to proceed

Balaji,
please go thru this note..
Note 718383 - NetWeaver: Supported UME Data Sources and Change Options
this note will address, your problem.
with regards,
Rajesh.
award suitable points.
<a href="https://websmp101.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=718383">Note 718383 - NetWeaver: Supported UME Data Sources and Change Options</a>

Similar Messages

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

Open Data Set Error while trying to read file from non SAP server

Hi all,
is it possible to read data from non-SAP application Sever?
I'm using OPEN DATASET p_filin FOR INPUT IN LEGACY TEXT MODE CODE PAGE '1504',
Where p_filin is other Windows server.Our applicition server is under Unix.Is it a problem?
I make test to read file from SAP application server and it was ok.So how to call other server?
Thanks!

Hi,
Yes it is possible to read data from a non SAP server through the statement OPEN DATASET.
The important thing to check is that the SAP Server got enough access to the non SAP server so it can perform a reading/writing process depending on your needs.
You should contact your network administrator and BASIS to help you check the permissions. This can be pretty tricky, specially if the servers are in different domains.
Regards,
Gilberto Li

How to access the SAP Server Console? Through VPN

How to access the SAP Server Console? Through VPN
Sudhakar

Hi,
You need to contact your system admin as they will enable the port in ur system so that u can access client servers.It should also be allowed from client side also i mean access.
You will connect thru weblink with user name and pw and SAP with logon details.
Thanks
Suresh

How to Access data from SAP Content Server through SAP Portal

Hi Experts,
I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
I am trying to use this URL into the CMS address but it is not working
http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Is there any other procedure for acceesing the DATA from SAP content server. ?
Thanks,
Ahmad

If your Content Server is being used by DMS, then you can use the DMS Connector for KM. This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM. For more info see this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
Andrew

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

IPhone connection with B1i Server through internet

Dear All,
iPhone is successfully connected with my B1i server through intranet (wifi connection).
But When i am trying to connect my B1i server through internet, I am getting the following issue.
I am getting an error as follows when i try to browse the tomcat homepage in IE
XCL198 HTTP-access currently not allowed from remote clients, as B1iP runs in local-mode or safe-mode.
I followed the solution given in B1iC troubleshooting Guide.
I am using SAP 8.81 patch level 6.
Maintenance->CFG Runtime parameters as
B1i Http port :8080
B1i Https port : 8443
B1i Server : My server ip
Please help me to resolve this problem.

Ken, George, Dear all,
in given context of problems running the mobile solution, please do NOT change B1i server Xcellerator properties at all.
Quite frequently there are ideas to change the default settings of WebDAV and remote settings of B1i server. This is simply a waste of time and definitely not required for troubleshooting or making the mobile
solution working.
Simply check the documentation 'Administrator's Guide for the Integration Component' for the purpose, the default settings, and further info about these properties you instruct to change:
a) About xcl.http.localOnly
Administrative Web access is limited to the local machine only. After installation, it is possible to manually allow access by remote machines by changing the particular setting in the operating system configuration file
(Xcellerator.cfg).
For additional documentation, choose Start → All Programs → Integration solution for SAP Business One → Integration framework, and then choose Help → Ref 04 – Operations, chapter 6.2.
b) About WebDAV-based access
WebDAV-based access to BizStore content is disabled. SAP does not recommend enabling this kind of access for productive systems, as this is typically needed for development systems only.
For additional documentation, choose Start → All Programs → Integration solution for SAP Business One → Integration framework, then go to Help → Ref 01 – Dev Environment, chapter 3.
For checking the connectivity from mobile to server / excluding network issues, B1iP can definitely run in local mode. When calling the server from mobile, B1iP would give you a fully sufficient, proper
response:
SAP B1iP detected an error: Emitted HTTP-Code 403 - Forbidden
Internal Reason XCL198 HTTP-access currently not allowed from remote clients, as B1iP runs in local-mode or safe-mode.
- This is exactely the alleged 'error', Tamizharasi mentioned at the beginning. Behind the internet connection issue from iPhone to his B1i server (which was unfortunately not described at all) must have been a quite different root cause - changing xcellerator properties is unfortunately a wrong recommendation here in order to clear such general iPhone issue.
I am concerned here from security side, such settings may not be amended lightly, and lead the problem-solving in the wrong direction - beside your additional efforts.
We do recommend to keep the default values and undo such configuration changes again, if not needed.
For troubleshooting the mobile solution please check SAP note 1602674.
Best regards, peter

Connect to local SAP server from mac

I have a Windows 2008 server with SAP server software installed. i connect to it using my windows laptop through SAP logon pad . But now am using a macbook pro os x 10.8.2 and have no idea on how to connect to the my local SAP server. And i installed a Java SAP client logon pad for mac . And this client Logon pad has an "Add New connection option" but i have no idea on how to configure it ,any sugg?

The incoming connection will only be restricted to random ports > 1024 unless the server is configured otherwise. ie. you can't manually pick the numbers.
The OS X firewall (ipfw) can be configured to allow the incoming connection from a particular IP address - but I run Norton firewall so I don't know the specifics of configuring ipfw via the OS X interface.
I do know that the shareware program Flying Buttress (previously known as BrickHouse) gives a GUI interface to the full flexibility of ipfw.
I failed to mention previously that you might want to investigate whether the server supports SFTP (Secure FTP) which performs all the communication over port 22 allowing a simple firewall setting (at the server end) and also has the benefit of performing encryption on the data traffic.
Graham

How to call TRFC from diff SAP server?

hi all,
i have created one rfc enabled FM on a SAP server, and i am calling that FM from different SAP server using TRFC. I am calling using this statement,
CALL FUNCTION 'ZMKV_RFC' IN BACKGROUND TASK
DESTINATION 'zmkv'
But it doesnt show me any output neither showing any errors? suggest me step by step procedure to do this...i will reward points if i get the requried answer.

hI Mayank..
Note: RFC destinations are maintained in Tcode SM59. Test this RFC Destination. And one more thing these RFC Destination names are CASE SENSITIVE.
So in this statement.
CALL FUNCTION 'ZMKV_RFC' IN BACKGROUND TASK
DESTINATION 'zmkv' "Check the CASE of the RFC Destination and give
REWARD IF HELPFUL.

Error while connecting to external server through SOAP/HTTP adapter

Hi,
we are trying to connect to the external server through SOAP adapter. The scenario is proxy to SOAP asynchronous scenario.
We are getting following error in Communication channel monitoring:
*Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault*
We also tried HTTP adapter in the receiver side. But it is giving red flag in SXMB_MONI with following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Internal Server Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Internal Server Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help.
Thanks in advance.
Regards,
sriparna

Make sure that the receiver webservice is up and running and in a state to receive the external calls. Confirm if the data you send is as per the requirement of the webservice and they haven't changed anything at their end.
Regards,
Prateek

Connect SQL Server through DBCO - DBCONNECT

Hi Guys,
I am trying to connect to one of the SQL Server in my Domain. I have made entries as mentioned by SAP note in DBCO Transaction. When I am testing connection through program 'ADBC_TEST_CONNECTION' it is showing me following error:
Testing a Database Connection Defined in DBCON
Could not open connection SQLCONNECTION
sql error 1- occured:
I have already installed DBMSSSLIB.DLL in executable directory also.
Please advice.
Thanks,
Usman Malik

Hi,
As mentioned I have put these files i.e. DBMSSSLIB.DLL and DBMSSSLIB.PDB (64bit) in the following directories and restarted the server:
X:\usr\sap\SID\D*\exe
X:\usr\sap\SID\sys\exe\run
X:\usr\sap\SID\sys\exe\ (i386 or ntamd64) \ (nuc or uc)
tried again but still it is showing the same error when i execute ADBC_TEST_CONNECTION program in SE38:
Testing a Database Connection Defined in DBCON
Could not open connection ABC
sql error 1- occured:
SQL Server is Standard Edition and OS is Windows 2008 R2 64bit. Our SAP Server is also Windows 2008 64bit.
Please advice what to do now because I have done entries in DBCO Transaction correctly as mentioned by the note 178949 i.e.
CON_NAME: <my_conn_name>
DBMS: MSS
USER_NAME: <db_user>
PASSWORD: <password>
CON_ENV: MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>
I am using SQL Server Administrator Username/Password to connect to this Server.
Thanks,
Usman Malik

Sap server url is not accessible..Portal is not getting started

Hi all,
I have netweaver 2004 and portal on aix02.
I was getting some error while accessing one of the link of the portal.
So through OS admin I gave command stopsap.
and again started sap server using startsap all
Still my sap url is not accessible.
I am getting error as "Page can't be displayed"
Following is the output of the operations I performed through OS:
124> stopsap
Checking db Database
Stopping the SAP instance SCS01
Shutdown-Log is written to /home/jetadm/stopsap_SCS01.log
Instance SCS01 was not running!
Database not running
Running /usr/sap/JET/SYS/exe/run/stopj2eedb
Trying to stop database ...
Log file: /home/jetadm/stopj2eedb.log
The database state is offline.
/usr/sap/JET/SYS/exe/run/stopj2eedb completed successfully
ctsaix02:jetadm 125> startsap all
Checking db Database
Starting SAP Instance SCS01
Startup-Log is written to /home/jetadm/startsap_SCS01.log
Instance on host ctsaix02 started
Can you please help me to SOLVE this issue?

Thanks Supriya,
I have pasted logs below:
Can you please help?
logs startsap_JC00.log=>
Trace of system startup/check of SAP System JET on Wed May 23 16:06:13 CDT 2007
Called command: /usr/sap/JET/SYS/exe/run/startsap
Starting SAP Instance JC00
SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
Starting at 2007/05/23 16:06:13
Startup Profile: "/usr/sap/JET/SYS/profile/START_JC00_ctsaix02"
(332024) SETENV LD_LIBRARY_PATH=/usr/sap/JET/JC00/j2ee/os_libs:
Setup Environment Variables
(332024) SETENV SHLIB_PATH=/usr/sap/JET/JC00/j2ee/os_libs:
(332024) SETENV LIBPATH=/usr/sap/JET/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/JET/SYS/exe/run
Execute Pre-Startup Commands
(332024) Local: rm -f jc.sapJET_JC00
(332024) Local: ln -s -f /usr/sap/JET/JC00/j2ee/os_libs/jcontrol jc.sapJET_JC00
Starting Programs
(438468) Starting: local jc.sapJET_JC00 pf=/usr/sap/JET/SYS/profile/JET_JC00_CTSAIX02
(332024) Waiting for Child Processes to terminate.
(332024) **** 2007/05/23 16:06:13 Child 438468 terminated with Status 0 . ****
(332024) **** No more Child Processes to wait for.
(332024) Parent Shutdown at 2007/05/23 16:06:13
Execute Post-Shutdown Commands
(332024) Exiting with Return-Code 3. (No more child processes)
Startup of Instance failed
~

Batch / script file to start /stop sap server

Hi,
 I would like to start/stop SAP server using batch file (in windows). I need this, whenever we have to shutdown the server and restart of the server, so that SAP will automatically shutdown and restart using batch files while server restart cases? If anyone knows, please let me know. Thanks,
Regards,
Sundar.

target of the 700 sapstartsrv improvement was to deliver identical functionality on all SAP platforms. As the DCOM programing model is only available on Windows platforms sapstartsrv.exe was enhanced by the WEB-Service interface and is available now on Unix too.
The DCOM SAPControl interface of sapstartsrv.exe is still existing, but only on Windows. Here you can use VB Script or any other programming language able to handle DCOM objects to write your own programs / scripts to interact with the SAPControl.
sapcontrol.exe is a command line program available since 700 which enables you control over nearly all functions of the sapstart service.
Even it has the same name as the DCOM interface it' something completly different.
regards
Peter
PS: sapcontrol syntax
usage: sapcontrol [
 -prot GSOAP_HTTP| http using gsoap build in sockets (default)
 NI_HTTP| http using SAP NI sockets (prefer Unix domain sockets)
 NI_HTTPS| https using SAP NI sockets (prefer Unix domain sockets)
 WINHTTP| http using Windows winhttp
 WINHTTPS| https using Windows winhttp
 PIPE Windows named pipes
 [-user <user> <password>] OS user and password for Webservice authentication
 [-repeat <N> <D>] Repeat Webmethod call <N> times (-1=forever) with <D> sec delay
 -format list| List output format (default)
 script Script output format
 [-host <hostname>] Host to connect to (default: localhost)
 -nr <instance nr.> SAP Instance number to connect to
 -function <Webmethod> [parameter list]
Webmethods: Start
 Stop [softtimeout sec]
 Shutdown
 RestartInstance [softtimeout sec]
 StopService
 StartService <SID>
 RestartService
 ParameterValue [<parameter>]
 GetStartProfile
 GetTraceFile
 GetAlertTree
 GetAlerts
 GetEnvironment
 GetVersionInfo
 GetQueueStatistic
 GetProcessList
 GetInstanceProperties
 ListDeveloperTraces
 ReadDeveloperTrace <filename> <filesize>
 ListLogFiles
 ReadLogFile <filename> [<filter> [<language> [<maxentries> [<cookie>]]]]
 AnalyseLogFiles [<severity 0-2>] [<maxentries>] [<starttime YYYY MM DD HH:MM:SS> <endtime YYYY MM DD HH:MM:S
S>]
 OSExecute <command> <async> <timeout> <protocolfile>
 SendSignal <pid> <signal>
 GetSystemInstanceList
 StartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [<waittimeout sec>]]
 StopSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
 RestartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
 AccessCheck <function>
 ABAPReadSyslog
 ABAPReadRawSyslog
 ABAPGetWPTable
 J2EEControlProcess <processname> <function>
 J2EEGetProcessList
 J2EEGetThreadList
 J2EEGetSessionList
 J2EEGetCacheStatistic
 J2EEGetApplicationAliasList
 J2EEGetVMGCHistory
 J2EEGetVMHeapInfo
 StartWait <timeout sec> <delay sec>
 StopWait <timeout sec> <delay sec>
 WaitforStarted <timeout sec> <delay sec>
 WaitforStopped <timeout sec> <delay sec>
Exitcode: 0: Last Webmethod call successfull
 1: Last Webmethod call failed, invalid parameter
 2: StartWait, StopWait, WaitforStarted, WaitforStopped timed out
 3: GetProcessList succeeded, all processes running correctly
 4: GetProcessList succeeded, all processes stopped
Security: Trusted connects without user and password check are possible through
 Unix domain socket or Windows named pipes. Protected webmethods like
 Start or Stop require a trusted connection or OS user and password
 authentication.

Two SAP server on one System

Hi All,
I have SAP MI 7.0 Installed with OS MS Windows 2003, DB MS SQL 2005. I want to Install SAP Solution Manager SR 3 on same System. Please help me to know how can i do this ? what are changes required on existing server so that both SAP server component can run at same time.
If any guide for same , please share link of tht.
Thanks In Advance.
Regards
Gyan

Hi Gyan,
The installation guides and documentation will give you the information you need.
Basis administration is not easy work and it requires study. Asking for shortcuts on SDN is not a substitute for that work. The main reason you have not received further replies to this thread is that it is inappropriate for you to ask and expect "shorcut" instructions from professionals who have "paid their own dues" through study and hard work. I would also think that your employer might think twice if they understood that a Forum was where they were going to receive their instructions for a complex, technical implementation.
We are not "wasting our time" with such replies, rather we are trying to ensure successful implementations of SAP.
Best Regards,
Matt

Error in Maintaining Portal Server setting in portal

Hi all,
Here I am facing an issue in BI and portal connectivity:
Status 3: Maintain Portal Server Settings for Portal
URL Prefix (ABAP) must have domain (profile parameter icm/host_name_full)
Domain of URL Prefix (ABAP) and URL Prefix (Portal) must be identical
The overview of RSPOR_SETUP shows that the comparison of domains on abap and portal is not correct:
Checks for Step 3 - Maintain Portal Server Settings for Portal
1. Compare Domains of URL Prefixes (ABAP and Portal)
   Domain of URL Prefix (ABAP):   bcs
   Domain of URL Prefix (Portal): bi.com
We have been maintaining the FQDN in host file as bcs.bi.com and it pings successfully. Profile parameter icm/host_name_full is set with subsequent system restart.
As of table RSPOR_T_PORTAL the URL is already stated as http://bcs.bi.com:50000.
Please advise how to fix this error.
Kind regards.

Hi Saurabh,
Sorry for late response. Following is the error message from desktopsupport tool.
+Status      Message+
++RED           The iView at 'com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.rritransaction does not have necessary permissions for being called directly     Add 'End User' permission for user group 'Everyone' to iView at 'com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.rritransaction'     ++
+RED           The BI Report-Report Interface iView does not have the necessary permissions for being called directly.     See note 983683 for details     Display note 983683+
It is here at this point when I followed the note 983683, logged on to portal with j2ee_admin, followed the path to add necessary permission i.e. group 'Everyone', only to find that on permissions page both "Add" and "Remove" functions (buttons) are grayed out (disabled).
My guess is perhaps it's due to j2ee_admin missing permission. Please suggest how to enable "Add"/"Remove" functions on System Configuration>Permission>Portal Content>Systemlandscape>open permission page.
Regards.

Maintain SAP Server through Browser--Authorisation

Similar Messages

Maybe you are looking for