Maintaining Frieght Forwarder Information for specific Vendor

Dear All,
I have a business requirement where i need to provide a facility for user to maintain frieght forwarder with relations to a vendor.
The user needs a facility to capture the freight forwarders details while creating the SAP Purchase Order.
How to i go about doing this, shall await your feedback.
Thanks & Regards
Shabeen Buhary

Hi,
Thanks for your feedback. Basically the above requirement is only for information purposes, would there be any additional process that the business have to adhere to if we maintain partner profiles etc.
How do i go about maintaining the partner profiles,
Thanks & Regards
Shabeen Buhary

Similar Messages

Maintain two excemption certificate for a vendor

Hi,
How to maintain two excemption certificate for a vendor.
I have a vendor, submitted lower TDS deduction certificate on april and again submitted another certificate in june with difference rate of TDS.
how to configure.
Regards
Venkat

One exemption per tax type-tax code combination can be maintained in the Vendor master. So if your taxes are of different combinations, then it is possible.
However, as per act, two exemptions are not available under the same section (For eg. you cant have two exemptions under section 196A). But it is possible to have two certificates under different sections. But even in this case, there are restrictions because at the end it is the income of the same Vendor.
So, to answer your question, technically it is possible to have two exemptions, but as per law you are not permitted, unless the act specifically permits such a provision under some notification.
Ravi.

Authorization to disable SAP Inbox Forward function for specific Work Items

Hi.
I recently solved a case for a customer of mine regarding authorizations for work items. They have several workflows running, but for this specific custom developed workflow, users should not be allowed to use the SAP Inbox Forward button.
I started by creating a new task classification (Z_FW) which I implemented on the workflow tasks where the forward functionality should be disabled. Now for test purposes I created a dummy user which I initially gave only authorization to the tcode SBWP, then I manually added the authorization object S_WF_WI.
For this entry I allowed all activities for work item type W and F for classification 1, 2, 3 and NO_CLASS (SAP Standard classification).
Now to my understanding this would give the test user authorization to perform all activities on Work Items and Workflows which are classified with one of the above, but also prevent me from doing anything with Workflows and Work Items with classification Z_FW.
However, to my surprise everything seems to work perfectly with just this entry. I am able to execute and forward work items with the standard classification, while I am able to execute, but not forward, work items with classification Z_FW.
My intention was to add another entry for authorization object S_WF_WI, for classification Z_FW with all activities except forwarding. But when I tried that, the only change was that forwarding was enabled for the work items with classification Z_FW, which I didnu2019t want.
Now can anyone explain to me why this is working? I am not too familiar with SAP Authorization as my area is mainly ABAP and WF, but his just does not seem logical.
Hoping someone can give me an explanation....
Thanks

Does the standard function not do what you want?
Task -> Additional data -> Agent Assignemt -> Maintain -> Attributes -> Forwarding not allowed.

Vendor Reconciliation account change for specific vendor

Hi All,
Client want to change the Reconciliation account in the Vendor Master but same reconciliation account assign to multiple vendor master but client want to change specific vendor not for all vendor . The vendor has postings to it right now. We want that all the existing postings should be transferred to the new recon account line item wise and the new postings will go to the new recon account.
Please suggest some approach so that this can be effected.
Regards,
Dev

Hi Debabrata ,
To clear the reconciliation Account one option is that you create a new open item managed GL Account and use Transaction FB05 to clear each open item in the Vendor Account one at a Time and post on the new open item clearing Account. Then change the reconciliation Account in the master data and then again use FB05 to post the transactions back on the Vendor Account one at a time,
As far as impact on Balance sheet is concerned, there should not be an impact except that the balance will be reflected in a different GL Account.
Thanks
Muthu

Min Max planning report - ability to run for specific vendor

Hi,
We have a unique requirement wherein business users would like to run min-max planning report for a specific vendor. Vendor here is item sourcing vendor. We are on R12 12.0.4. This version of applications doesnot support sourcing vendor as the min-max report parameter.
Other than setting up item category for ASL vendor, i can't think of any other easy way to accomplish above requirement. Please suggest workaround for above requirement.
Thank you

If you have to do this, here is a complex workaround.
Create a request set that contains a custom program as first stage and the regular min-max as the second stage.
The custom program accepts vendor name as a parameter and disables min-max planning flag for all items EXCEPT those that are sourced from that vendor.
Then the 2nd stage runs and creates requisition.
You may add a 3rd stage that resets the min-max planning flag.
Make this program incompatible with itself so 2 users won't run it at the same time.
Hope this helps,
Sandeep Gandhi

How to determine plant code for specific vendor

Hi Experts,
I am getting list of vendors(EORD-LIFNR) from Purchasing source list (i.e EORD) for every material.
After that I would like to know how to determine plant code of any specific vendor.
Please let me know all tables links where i can get this or transactions as well if i can see this??
Thanks,
Yogesh

Hi ,
The vendor will not be created at the plant level.so we cannot get a vendor never at plant level in standard( otherwise customized)
Know if i am not wrong ,if the requirement is to find the source list of the vendor and there presence in plants it is done in the same table EORD-Werks
if there is something else let me know
Regards
Anjanna

SQL Query for specific vendor

Hi Experts,
The user has requested to prepare reports with specific vendor name in PO. Please guide me with this.
Edited by: shaichandan on Sep 27, 2011 9:48 AM

Hi,
Check this if it helps :
select t0.DocNum as 'PO Num', t0.DocStatus as 'Status', t0.DocDate as 'Date',
t0.CardCode as 'BP Code', t0.CardName as 'BP Name', t0.DocTotal as 'Document Amount',
t1.ItemCode as 'Item', t1.Dscription as 'Item Description',t1.Quantity as 'Qty',
t1.ShipDate as 'Shiping Date'
from OPOR t0 inner join POR1 t1 on t0.docentry = t1.docentry
where t0.cardname in ('Almats Printing Solution','Safe Offset')
Order By t0.cardname
Kind Regards,
Jitin
SAP Business One Forum Team

Set Output Type for specific Vendors Only

Hi,
I have created an output type to send external mail for PO. I want to restrict it to send the email to only a specific number of users. So I created consition records based on Companycode/vendor num/doc type.
I entered the records for say x and y vendor only .
But , Still when i test it with some other vendor whose record is not maintained it still sends the email?
Is it the rt path I am on ? Is it the rt way to do this ? Based on the info available online and sdn i tried these steps ...I m not sure if thats correct.
Pls let me know how to achieve this restriction ?
Thanks,
Shilpi

Hi
You check the access sequence for purchase order output type. Access sequence will determine which condition record to be checked first. If any other condition table with records has priority (defined in access sequence) then your condition record will not be taken into account for output type.
Bala
Note: Award points if helpful

Error: Automatic tick in free Item in purchase order on line for specific vendor

Hello All,
Sales order is created then running mrp through MD01,requisitions are created.while creating purchase order for a particular vendor it is automatically ticking on free item indicator and giving error as material is not maintained in the plant (XXX) Free trade. while PR is not created for plant(XXX).
i have checked they are not doing any transaction in plant (xxx).
Please do needful in above issue.

Hi all ;
Can you share screen-shoots for your sales document ?
1-What is your sales document type ? Go to VOV8 find it and share.
2-What is your item category for this sales order? Go to VOV7 find it and share us.
3-What is your schedule line ? Go to VOV6 find it and share us.
Regards.
M.Ozgur Unal

Change of G/L Account for specific vendors in Transaction MIGO

HI Friends,
I have a requirement to change the G/L Account no for particular set of Vendors instead of G/L account maintained in the Transaction OBYC while doing MIGO.
I need a user exit through which i can change the G/L account number .
Thanks in advance.
Regards,
Sivani.

I tried this ...... but it is not working.....My requirement is to change G/L Account no for Accounting document ....
By default it is picking up from transaction OBYC according to the configuration done .......I need to assign different G/L account which is not assigned in OBYC Transaction .......and SAP should not pick it from the configuration
Regards,
Sivani.

TS1702 ITech Developer is ripping off App Store customers and there is NO contact information for this Vendor. Doesn't the Apple/Mac reputation stand for good anymore? Why would they allow such a ripoff developer remain in the App Store! I am outraged!

You cannot contact the iTech Developer. This ripoff vendor has no contact info and I expected more protection from Apple then to allow such a shady vendor to sell to their customers. Their collage app is a complete ripoff. It does nothing! It's partly my fault for not reading reviews first! I know better now. Thought Apple would safeguard their customers as they have always done in the past! I am very upset right now!

While i understand you're upset, you're yelling at a bunch of volunteer users. We can't do anything about your situation. We're not Apple
http://www.apple.com/support/itunes/contact/

Particular Item for specific vendor

Hi All,
I wanted to know is there any way through which we can select a particular item while creating a Purchase order? I want the system to display a particular item as soon as i select a particular vendor! Can this be achieved? Or is there any other way to handle this?
The scenario is, we have an item which we purchase both from local vendors as well as we import the same. We have created two items so that we can trace the details whether the item was purchased locally or imported. Now, the need arises as when we select the foreign vendor, we would like to get the item (which we created for import purpose) by default. Can this be achieved? Please let me know.
Thanks in advance,
Joseph

If you define a UDF on business partner master e.g. as U_DefItem, then you can make an FS like this:
Select U_DefItem From OCRD Where OCRD.CardCode=$[$4.1.0]
and connect it to the Item No. field autorefresh when Customer/Vendor code changes.
If you already have an FMS on this field which executes an SP then you can incorporate this code into it. If your original FMS selects an item code at some condition, you can modify it to select this default one otherwise.
Edited by: István K#rös on Nov 9, 2009 10:06 AM

Goods receipt from specific vendor always posted to Quality Inspection

Hi ,
For specific- vendor PO, during the GR, the stock type is automatically posting to "Quality Inspection", for all the materials.
Not allowing to change during the MIGO .
Want to know how this is set. and remove it. Because all the GR for PO -101 , should go to "Unrestricted Use" , only acc to current practice.
Pls advise.

HI,
You can post the Stock to Inspection Stock always
1. Either mainatain this to MMR in Purchase View. It will post to inspection irrecpective of vender.
2. In Punchase PO in, Maintain Stock Type ...Inspection stock...here u can specify with vender also.
But not from Material master, stock is as inspection Post will always post to inspection not vender specific.
Hope Help u 1
Regards,
Pardeep Malik

How to Edit information of existing vendors

Hi All,
How to edit the information of existing suppliers using Supplier Open Interface Import Program. This information is exists in PO_VENDORS table.
I have successfully imported new Supplier with Status = NEW and now I want to edit it.
Can anyone guide/help me ?
regards
Sanjay

Hi Vik & Terry,
Thanks for your update.
I want to update Vendor Heder Information , for example, Vendor Type or Bill To & Ship To Location, and Vendor Site Information , For Example, Vendor Address.
Such task should be accomplished only thru API , not thu Form.
If you have any idea, let me know.
regards
Sanjay

Import tax procedure for domestic vendor?

Hi Gurus,
How to maintain Import tax procedure for domestic vendor?
I have gone through earlierr threads but not got useful one..
pls help..

Hi,
U can ensure that Import pricing procedure is picked up when creating a Purchasing document for domestic vendor by maintaining the Import vendor schema group( If you have the configured ) to your vendor in XK02 ( Purchasing view)
If u donot have a seperate Import vendor schema you could either have a seperate Purchase organisation schema group and attach the same to your Import Purchase Organisation .
This would result in picking up of Import Pricing procedure for Domestic vendor
Regards
Sandeep

Maintaining Frieght Forwarder Information for specific Vendor

Similar Messages

Maybe you are looking for