Maintenance view problem "No data maintenance Authorization; Display only"

Maintenance view problem
Question 1>>>>
> I have created a table with Display/maintenance allowed and technical setting Data class - APPL0 (master data, transparent tables).
>> Then I have created a maintenance view thought utilities->table maintenance generator where i have specified the Authorization group as &NC& (w/o auth. group)
->and also created a function group and specified in the maintenance screen-> I have selected maintenance type as one step-> i have given the overview screen number->and in Recording routine i have selected - no, or user ,recording routine.
>>> Now when i go to transaction SM30 and put the table name and press on maintain button I get a information box saying "No data maintenance Authorization; Display only".... and it only displays the data.
my problem is I want to enter data through maintenance view (SM30).
2nd Question >>>> once i create a function group for maintenance view how can i assign a transaction for this. (as if i do it as we do for a module pool program it gives me error)Thank you.
kailash

SE93. Enter a transaction name. Create. In the pop up enter a title and select 'Transaction with parameters'.
Next screen fill the following;
Transaction 'SM30'
Check 'Skip first screen'
In the table control at the bottom of the screen
Name of screen field 'VIEWNAME'
Value <your table name>
Name of screen field 'SHOW'
Value 'X'
Save.
Job done.

Similar Messages

Background Job Still Running - Data Can Be Displayed Only Msg Populated in Maintain Versions (OKEQ) Screen

Hi,
I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
How can I resolve it.
Waiting for your valuable suggestions.
Regards,
Nageswar.

Dear Rajneesh Saxena
Thanks for your prompt reply.
Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
Problem is solved
Regards,
Nageswar.

Maintenance view problem

Dear gurus
I have generated a table and created a maintenance view for that table.
created a function group and assign that group to maintenance view of that table
create a transaction from se93 calling SM30 with table name and update stats X
its working on development server
but when i transport it to 800 server it says that PRD server is not modifiable
i have done the same process on another table but its working not in this table
where i have gone wrong ?
Regards
Saad Nisar.

Hi Saad Nisar,
In the table delivery and maintenance tab, change the 'delivery class' from C (Customizing table, maintenance only by cust., not SAP import) to A (Application table (master and transaction data)). This will take care of Your issue...
Regards,
Birendra

Table maintenance view problem

Hi. I'm trying to generate a table maintenance view for a custom table, and I keep getting an error message. I go into the table maintenance view generator and fill out the fields. I'm selecting a function group that has ZHR0 as the development class (which is correct). Then when I click on the create button a screen pops up with the workbench request number. When I click on the continue button, I get the following error message: "The maintenance object description has no transportable class." If I click for more information, this is what it says to do: "Either assign the maintenance object description for object ZTS_ADJST_REAS to acorrectable development class, or assign the table forthe generation of the maintenance module to a function group with non-correctable development classes." Apparently the maintenance object description somehow got assigned to temporary class $TMP. Where do I go to change this?
Thanks,
April King

Hi April,
You can use standard program RSWBO052 to change the package. Enter the object and mark the checkbox -> Execute -> Place the cursor in the object -> Right click mouse -> Reassign -> Enter new package -> Save.
or you can go to transaction SE80 -> Select Package -> Enter &TMP -> Hit Enter -> Find your object -> put the cursor and right click -> Other functions -> Object Directory Entry -> Change -> Change the package -> Save.
Hope this will help.
Regards,
Ferry Lianto
Please reward point if helpful.

Critical Problem with "Data Ownership Authorization"

Dear Guru's,
I am facing a problem with applying Data Ownership Authorizations and badly needing your help.
The scenario is as follows.
For example "A" is a Product Manager sitting in Mumbai (Main Branch) and person "B" is a Sales Manager sitting in Banglore (Sub Branch).
In Mumbai there are say 5 product managers, no i am able to make DOA such as particular product manager will be able to view only his sales opportunities and can edit,delete it. I have made it with the owner of the document basis by forming a team called "A" and made A as a member of the team.
Now person B sitting in Banglore should be able to view sales opportunity with branch as Banglore and not any other branch but these opportunities can have any product manager (from Mumbai) as owner.
Please tell me how can i do this in B1.
Thanks in advance
Regards,
Ashish Tambe
Edited by: Rui Pereira on Nov 7, 2008 1:49 PM
Edited by: Rui Pereira on Dec 9, 2008 5:07 PM

Hi,
It is given on the link that for using DOA on Branch basis, the user and owner must be from the same branch, but this is not the case here.
Owner is from HO and user is from branch office.
Problem still persists sir.
Edited by: Rui Pereira on Apr 28, 2009 12:17 PM

Debugger Problem: Full data is not displayed in the fields of the ITAB

Hi Guys,
I am having a problem related to ABAP Debugger. Data is not fully displayed in all the field of the internal table. I am using SAPGUI 640 with ECC6. In the debugger I have increased the width (size) of the column but still data is not fully displayed.
Below is the example:
*Actual Data*        *Displayed As*
1141               11...
P42X13             P...
Testing            Tes...
When I bring the curson on the displayed incomplete data, the full data is shown in small popup window.
I have increase the size of the column but still it is not showing the complete data.
I have to download the internal table data to an excel spreadsheet to view the complete data.
Please help.
Thanks,
mini

I cannot use SAPGUI 710 as my company is not upgrading it to 710. We have to live with 640 for now.
SAPGUI details are as follows:
Name............: saplgpad.exe
Description.....: SAP Logon Pad for Windows
Product version.: 640 Final Release
File version....: 6405.5.21.1020
Build number....: 855417
Please help if you can. This is very frustrating.
Thanks.

How to set the date picker to display only months?

I am trying to set the date picker in SSRS 2012 to allow the user just to select the months: and when I run my store procedure I get a can't convert data type from nvarchar to datetime.  If I don't comment out of the Where Clause, nothing
is returned if I leave the Where Clause in.
Alter
PROCEDURE RollingReportList
AS
BEGIN
SET NOCOUNT
ON;
SELECT
distinct
   [ItemDescription]
,[QuantityOrdered]
,QuanitityCost
= [QuantityOrdered]
* [Price]
,Convert(datetime,(CONVERT(CHAR(4),PE.[LastUpdated],107)
+ '-'
+ (right(CONVERT(CHAR(4),PE.[LastUpdated],112),2))))
as CurrentMonth
,Convert(datetime,(CONVERT(CHAR(3),Datename(MONTH,DATEADD(MONTH,1,PE.LastUpdated)),107)
+ '-'
+ (right(CONVERT(CHAR(4),PE.[LastUpdated],112),2))))
as NextMonth
,Name
FROM
[HQStore].[dbo].[PurchaseOrderEntry]
as PE
inner join
[HQStore].[dbo].[PurchaseOrder]
as PO
on PE.[PurchaseOrderID]
= PO.[ID]
inner join
[HQStore].[dbo].[Store]
as ST
on PE.[storeid]=ST.ID
Where
(@Start
= '01/01/2009'
and @Last
= '12/31/2010')
End
Go
Exec
RollingReportList
Any Help?

Try the below....
Where  (@Start = '20090101' and  @Last =  '20101231')
SELECT FORMAT(getdate(), 'MM')
02
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

HR Intelligence message: Data cannot be displayed due to security privilege

Dear Gurus,
I have setup HR intelligence and following messages are appearing for all new users who are viewing graphs:
Information: Data cannot be displayed due to security privileges_
I know it is something to do with with security issues but i dont know from where to allow the users and make changes to security .
any help would be highly appreciated,
regards,
Muhammad Noman Shafique

Did you check below -
HR DBI Dashboard Shows Data Cannot be Displayed Due to Security Privileges For a Particular User [ID 423070.1]
Data Cannot be Displayed Due to Security Privileges on DBI Portlets/Dashboards [ID 395066.1]

Can we display only sub totals on the alv grid output

hi,
can we display only the subtotals calculated on the grid display.it should display all the data it shpuld display only the subtotals of it.
if yes can any one please give me the code for
will be awarded with points.

Hi Raju
You can do that
When you are doing fieldcatalog,comment ws_fieldcat-do_sum = 'x'.
if you comment that it wont display totals.
use sort
i_sort type slis_alv...
clear ws_sort.
ws_sort1-spos = '1'<position of field>
ws_sort-fieldname = 'matnr'.
ws_sort-up = 'x'.
append ws_sort to i_sort.
pass this i_sort to FM

App file sharing: files are displayed only the first time...

clicking somewhere else and then back to the application that you want to share files are not there any more.
I've to close and re-open the itunes in order to see them again.
itunes is running on windows 7 64bit.
is this a bug ?
thank you.

Hi! I have the same, exact problem. The files are displayed only the first time I look at the apps listed under File Sharing. If I look at another app on the list, the files on the one I previously checked are gone when I look at it again. Is there any way to fix this? I have a Lenovo X61s on Windows XP Professional 32 bit.

Data validation in maintenance view

I have a maintenance view which is just simply a projection of a database table.
I'm trying to add a validation before user save the data, what I have done is add a standard event by using 'Table Maintenance Generator', there is an event 'Before saving the data in the database' which I think is proper place to do the validation.
Now the problem is if the user input is invalid, after validation and message displayed on the screen, the entry user is editing will be locked, and cannot be back to editable even you click 'Change<->Display' button, user have to back to SM30 screen and re-enter again.
The idea behavior is the screen stays and the entry is editable, user can correct his input immediately.
So someone can provide any advice regard this problem?
Thanks in advance.
Ben

Hi
You can set the flag VIM_ABORT_SAVING in order to abort the saving process and back to maintenance screen without to go out from SM30
I've found a my old code:
* Check entries with same sorting key
 loop at t_sort_key_count.
 check t_sort_key_count-tot > 1.
 message i398(00) with <...............>
 vim_abort_saving = 'X'.
 exit.
 endloop.
I use e message tyoe I instead of E, in order not to lock the process and back to imain screen
Max

Problem regarding updation of Z-table through maintenance view

hi ,
I m facing problem in updation of Z-table through maintenance view (SM30).
The scenario is that I have one customizing field in my Z-table which is checkbox.
Now I need to populate 2 fields in Z-table on tick of this checkbox and clicking of SAVE button.
For this I have created one module ''change_field'' in PAI.
Actually my database table is being updated but as soon as the control left my module all the updation that take place vanishes away.....
So please help me in this matter.

Thanks for ur previous effort it is updating the database but its effect is not shown immediately on screen.After i referesh the transaction it is dispalying the data.
So can u please suggest me any way....
Now i have one scenario infront of me....
I need to restrict the data shown in maintenance view.
I think it would be same as pop-up window displayed when we tick on 2nd radiobutton ("ENTER CONDITIONS")
of intial screen of t-code SM30.
Please suggest what shud i do....
Thanks and reagrds,
Amit
Edited by: amit gupta on Jul 18, 2008 1:35 PM

How to read data in a program from a MAINTENANCE View

Hi Experts,
Requirement:
1. I have maintained a maintenance view on three Database tables.
2.Data can be entered in the view as it is a Maintenace view as i have created maintenance generator for that and it is a requirement.
3. In one of my programs i need to read this data, into an internal table, that is maintained through this view.
Problem: When i am firing a SELECT query on this view, it goves me a syntax error that i cannot get data by select query on a Maintenance view.
Solution required for: Is there any way i can get the data from this Maintenance view.
Thanks in advance for your exteemed replies.
Regards,
Raghavendra Goutham P.

Hi,
   Only projection view or database view can be used
   in select query.
    Find the tables used in view and
   Select data into report program by
    joining tables .
Regards
Amole

The column names is not being displayed in maintenance view...

Hello experts,
I created a maintenance view for my custom table and I am wondering on why does the columns
have no names? It is just displayed with a '+'. Help would be appreciated. Thanks a lot
guys and take care!

Hi,
Check whether is any description for the corresponding data element...
Otherwise you can go to SE51 to change the column text..
If you are adding text to the data element generate the screens again..
Thanks,
Naren

Refresh data in Table Maintenance view

Hi,
I have created a table maintenance view for db table A and added my function button to this view. When I click the button I append a few records to the table A from table B. But this recoreds are not displaied in the view.
If I rerun the view I can see added records.
How I have to refresh the view to display added records?
Regards,
Ilya

Hi Jesus,
COMMIT WORK isn't help me.
I found that I have to use TOTAL and EXTRACT structures to modify data in maintenance view.
It's fine. I do something like this in my FM
MODULE 9CUSTOM_PF_BUTTON INPUT.
lt_total[] = total[].
lt_extract[] = extract[].
CASE function.
      WHEN '9DOWNSH'.
         modify lt_total from wa_total.
         modify lt_extract from wa_extract
ENDCASE.
total[]   = lt_total[].
extract[] = lt_extract[].
ENDMODULE.                 " 9CUSTOM_PF_BUTTON INPUT
But TOTL and EXTRACT tables contain data of the current maintenance view.
I work with a view cluster and I have to append or delete records from one view if I do something in other view.
How I can modify data one view from another maintenance view?
If I have modified database tables directly I don't see changes in the view cluster.
Regards,
Malnor
Edited by: Malnor on Nov 23, 2010 9:19 AM
Edited by: Malnor on Nov 23, 2010 9:38 AM

Maintenance view problem "No data maintenance Authorization; Display only"

Similar Messages

Maybe you are looking for