How to read data in a program from a MAINTENANCE View
Hi Experts,
Requirement:
1. I have maintained a maintenance view on three Database tables.
2.Data can be entered in the view as it is a Maintenace view as i have created maintenance generator for that and it is a requirement.
3. In one of my programs i need to read this data, into an internal table, that is maintained through this view.
Problem: When i am firing a SELECT query on this view, it goves me a syntax error that i cannot get data by select query on a Maintenance view.
Solution required for: Is there any way i can get the data from this Maintenance view.
Thanks in advance for your exteemed replies.
Regards,
Raghavendra Goutham P.
Hi,
Only projection view or database view can be used
in select query.
Find the tables used in view and
Select data into report program by
joining tables .
Regards
Amole
Similar Messages
-
How to read data in binary form from file?
Hi,
i try to write an implementation of LZW. I need to read data in binary form from a file. How can i do that? I cannot find something like "binary input stream" ...
ThanksHi,
i try to write an implementation of LZW. I need to
read data in binary form from a file. How can i do
that? I cannot find something like "binary input
stream" ...
ThanksInputStream reads bytes. I don't understand your question. -
How to get data in ABAP program from multicube in external BW system
Hi friends,
I want to get data from one multicube which resides in an external BW system, in my ABAP program internal table. Is there any SAP standard RFC / BAPI for this or is there any other way around or I have to design my own program to get the data ?
To make my requirement clearer, my ABAP program is in one BW box and the above mentioned multicube in another BW box. I want to get data from the multicube into my program.
Any help is appreciated with points.Look at the following FM; you may find the FM RSDRI_INFOPROV_READ_RFC useful.
Call the FM in your program and read data and update.
RSAD_INFOCUBE_READ_REMOTE_DATA
RSDRI_INFOPROV_READ_RFC
Ravi Thothadri -
How to read data in correct format from EXCEL file into an internal table??
Hi Experts,
My requirement is to upload data from an excel file on presentation server into an internal table on <b>SRM</b> server.
I used 'GUI_UPLOAD' function module to achieve the same but all the the data is getting uploaded in # only.I had set in the 'HAS_FIELD_SEPARATOR' to 'X' to overcome this problem.
But all the efforts are in vain. The function module 'ALSM_EXCEL_TO_INTERNAL_TABLE' doesn't exist on SRM Server and I am not getting any other function module having similar functionality available on SRM server.
I have written the following code:-
TYPES: BEGIN OF ty_addr_loc,
userid TYPE xubname, "User Id
addr_code TYPE char4, "3 Digit Site Location Code/4 Digit
"Alternate Address
loc_id TYPE bbp_location, "Indicator: Address is standard address
END OF ty_addr_loc.
*Retrieving file name
parameters: p_file type rlgrap-filename.
DATA:
Local variable holding file name
l_file TYPE string,
Local Variable holding the file type,
l_type TYPE filetype VALUE 'ASC',
Local Variable holding the field separator
l_sep TYPE char01,
i_tab type standard table of ty_addr_loc.
Clearing local variables
CLEAR:
l_file,
l_sep.
Initializing the local variables
MOVE p_file TO l_file.
l_sep = 'X'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_file
filetype = l_type
has_field_separator = l_sep
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = i_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
Throwing an information message
MESSAGE i003. "Data Upload Failed
LEAVE LIST-PROCESSING.
ENDIF.
Please tell me a way out. I have to make a delivery urgently.
Thanks in advance,
Swati GuptaHi
Try the FM <b>KCD_EXCEL_OLE_TO_INT_CONVERT</b>
Sample:
call function 'KCD_EXCEL_OLE_TO_INT_CONVERT'
exporting
filename = i_filename
i_begin_col = l_begin_col
i_begin_row = l_begin_row
i_end_col = l_end_col
i_end_row = l_end_row
tables
intern = xt_intern
exceptions
INCONSISTENT_PARAMETERS = 201
UPLOAD_OLE = 201.
if sy-subrc <> 0.
e_subrc = sy-subrc.
exit.
endif.
<b>reward if Helpful.</b> -
How to read data from a zipped MS Access file?
How to read data from a zipped MS Access file?
RPJ,
You do not need to use the Close Zip File.vi when you unzip a folder. This VI is used when you are creating a zip folder.
As for examples, I found a couple of ActiveX based MS Access examples. These programs look to be pretty basic. For more in depth example I would search Microsoft Developers Network
http://zone.ni.com/devzone/cda/epd/p/id/2188
http://zone.ni.com/devzone/cda/epd/p/id/1694
Regards,
Jon S.
National Instruments
LabVIEW R&D -
How to read data directly from clusters
hi all,
how to read data directly from clusters
Thanx in advance,
amruta.Using macro:
RP-IMP-C2-B2.
RP-IMP-C2-B1.
RP-IMP-C2-ZL.
....etc.
For TM cluster, U also can use BAPIs like HR_TIME_RESULTS_GET
More details see SAP HR course 350(HR Programming) -
How to read data from a CLUSTER STRUCTURE not cluster table.
Hi,
how to read data from a CLUSTER STRUCTURE not cluster table.
regards,
Usha.Hello,
A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
Regards,
Mansi. -
How to read data from a file that was formatted by excel?
Hi everyone, I'm familiar with java.io and the ability to read from files, can anyone tell me how to read data from a file that was formatted by excel? Or at least give me some web references so that I can learn about it?
http://jakarta.apache.org/poi/hssf/index.html
HSSF stands for Horrible Spreadsheet Format, but it still works! -
How to read data from a router by using labview
I am a beginner labview. How to read data from a router by using labview ?
What kind of data are you trying to read?
Does the router behave like a webserver that you log into? If so, search the forums for threads discussing HTML. -
How to read data from a connected modem
any one can help me? how to read data from a connected modem. The modem received real-time data from other server. The data is in text format. I can see this text when I used hyperterminal for dial up and the data is accumulated such as:
@aa1235678
@bb2135647
@cc5214367
since it is real-time data, I want to read one line each time instantly when it arrives.You need to use the Java Communications API. (http://java.sun.com/products/javacomm/index.html)
-
Hi experts, how to use open sql to read data from one " maintenance view"?
i want to use this part of data within report ,so how to use open sql statement to read data from one " maintenance view"?
Hi
You can't use OPEN SQl statements to fetch data from maintenance view
You have to use only Database views
see the different types of views and the difference
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Reward points for useful Answers
Regards
Anji -
can someone help me with this....
how to read data.....and move it to internal table....
the requirement is as:
<b>Get the Participant details in an internal table IT_FINAL_PAR</b>
Loop through IT_PA0002 and move Personnel number (PERNR), Personnel ID Number (PERID), Last name (NACHN), First name (VORNA), Gender Key (GESCH), Date of Birth (GBDAT) into a final internal table for Participant data IT_FINAL_PAR.
Read the internal table IT_PA0006 to get the corresponding House Number and Street
(STRAS), City (ORT01), Postal code (PSTLZ), State (STATE), 2nd address line (LOCAT) by comparing Personnel Number (PERNR)and move those retrieved field values to the final internal table for Participant data IT_FINAL_PAR.Hi,
you could try the following:
* work areas
data: W_PA0002 like line of IT_PA0002[],
W_PA0006 like line of IT_PA0006[],
W_FINAL_PAR like line of IT_FINAL_PAR[].
loop at IT_PA0002 into W_PA0002.
clear W_FINAL_PAR.
* move values from IT_PA0002
W_FINAL_PAR-PERNR = W_PA0002-PERNR.
W_FINAL_PAR-PERID = W_PA0002-PERID.
* read address values from IT_PA0006
read table IT_PA0006 into W_PA0006 with key pernr = W_PA0002-pernr.
if sy-subrc = 0.
* move fields from IT_PA0006
W_FINAL_PAR-STRAS = W_PA0006-STRAS.
endif.
append W_FINAL_PAR to IT_FINAL_PAR.
endloop. -
How to read data from an internal table into a real table?
Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
EXPORTING
i_infoprovider = s_cubename
i_query = query_name
i_t_parameter = query_string_tab
IMPORTING
e_cell_data = t_cell_data
e_axis_data = t_axis_data
e_axis_info = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O -
Help me, How to read data from USB ???
Help me, How to read data from USB ???
If its a disk on key or some portable hard drive than once its connected to the usb and recognized by the system you can access it through java like you would access your hard drive.
-
JTable, how to read Data from it when enter is pressed
How to read Data from JTable on Return or lost focus from cell.
Also please tell me which listener I should should.
thx for helpYou should read the tutorial about tables, cell editors and models.
Also you should not [url http://forum.java.sun.com/thread.jsp?thread=472677&forum=57&message=2186815]crosspost
Mike
Maybe you are looking for
-
I received a notice to download a newer version of itunes. After starting the process of downloading I got an error message which then suggested I try to download itunes again. When I did this it showed the file was already in my system and stopped
-
Getting Error during Invoicing
Hi Experts, I am getting error of an account during invoicing.I have tried to invoice of the Electric billing document in T code EA19. I am not understanding why it is fetched Gas division business area where I am trying to invoice of only Electric.
-
Error: archive wine-0.9.11-1.pkg.tar.gz is corrupted
I'm getting this when I try to upgrade wine. Anyone else?
-
Hmi wizard for indicators inside cluster array
I am setting up a config screen for use with the DSC and tag engine. I have an indicator and analog value inside a cluster array. Can you use the hmi wizard to make unique conditions for the indicator in each array element?? or would I have to use a
-
Authplay.dll still here after quarterly??
Hi, despite this announcement http://blogs.adobe.com/asset/2012/04/background-on-security-bulletin-a psb12-08.html even in the Acrobat 9.5.1 folder I am still seeing the dangerous file authplay.dll with the old flash 10.3!!!! why??? You did announce