Maitaining Last Run Date!

Hi,
we have a specific requirement of creating a Delta enabled Datasource using a Z Function Module, which will use Z control table for maintaining Deltas.
Any pointers to the same will be appreciated.
Regards,
San!

hi siggi,
i have created all this...but my problem is like this:
Through Z fm,for the first run, i have to filter the records based on some codition like vbreve-rrsta='z'.
going forward, i have to filter the records based on vbreve-erdat ( date on which record was created) with last_run_date( means last time when we run delta).
this code for this:
Select <Fields> from vbereve
Into g_internal table
where ( erdat = g_last_run_date and erzet > g_last_run_time)
 or (erdat > g_last_run_date and erdat <G_current_date )
 or (erdat=g_current_date and erzet LE to G_current_time)
 And rrsta = z.
g_last_run_date= previous day run date & g_last_run_time have = previous day run time,
G_current_date= (sy_datum) current day run date & g_current_time = (sy_uzeit) current day run time,
have to be stored in a Ztable.
For the first run (initial value), set g_last_run_date = 01/1900**
can use help

Similar Messages

How to get the last run date.

We intend to develop an incremental data load mapping using this strategy:
1) The mapping reads the date it was last run from an auxiliary table.
2) It selects from the source only those rows that were inserted or updated after said date.
3) Then, a post-mapping process updates the last run date in the auxiliary table, using SYSDATE.
The problem with this logic is that there is a gap: if the mapping starts running at 1:00 and ends at 2:00, the rows that are inserted in between will never be loaded.
Is there any way to get the value when the mapping started running? Is there a better way to do this?
Any help would be appreciated.
Juan Algaba

There is always the possibility of some record updates slipping through the crack if you are depending on dates unless you are very carefull. All of the audit tasks that the OWB-generate code performes take time. Any pre- or post- process that needs to run takes time. So which date is the best cuttoff point to equate to "when the last run of the merge (or insert or update) statement completed"?
Plus, how do you handle reloads if the previous load failed and your mapping had incremental commits?
Is your source on another server? If so, are the dates in perfect synch? The audit tables populate with sysdate of your runtime schema. Is that the same as the sysdate on your source remote database?
I would qualify my query to look for all updates since the start of the last run that finished successfully - adjusted if neccesary for sysdate differences if it is on a remote schema. And make sure that your code handles any reloads gracefully in the event that this brings back data that you have already loaded once. .
Because we use Oracle Streams to load a local staging area, we also have custom code to dump the primary keys of all data changes to utility staging tables while streams is updating the local copy. So, our Person table has an st_Person_delta table that just holds the primary keys that have been updated by Streams since the last ETL run.
During datamart load we disable the streams apply to stabilize our environment, and join these lists of pk's to their source tables to drive our ETL. So we only select data where Streams has performed an update to the row since our last run. When we are done our ETL, we truncate the primary key staging tables, and then turn streams back on to start loading up our new delta into our staging tables again..
The ETL gets pretty complex though when many tables join together in one mapping and you need to check all possible source table deltas to see if any of them got updated to determine the delta for a given dimension or fact record, but it works great once you get it all done.

To find last run date of custom concurrent program in oracle apps

Hello Exports,
Can you pls tell me how to find last run date of custom concurrent program in oracle apps.( thr Backend query )
Thanks in advance,
Edited by: 981527 on Mar 7, 2013 3:01 AM

try the below:
select fcp.user_concurrent_program_name
,fcr.request_date
,fu.user_name
,fcr.actual_start_date
,fcr.actual_completion_date
,fcr.phase_code
,fcr.status_code
,fcr.argument1
,fcr.argument2
,fcr.argument3
from fnd_concurrent_programs_vl fcp
,fnd_concurrent_requests fcr
,fnd_user fu
where fcp.user_concurrent_program_name like 'Payroll Run'
and fcp.concurrent_program_id = fcr.concurrent_program_id
and fcr.requested_by = fu.user_id
order by fcr.actual_completion_date desc

How to find the last run date of the report..

please any one one help me
how to find last run date of the report...
for example if my report is zgrir...if i am exuted in last week
if want to find when it executed
last run date is req
please any one help me...

The trasaction stat is limited because i want all the execution date even if it is 3 years ago.
I have tryied the transaction st03 but it is limited to 3 months ago.
check transaction STAT and it's report RSSTAT00.
U can copy RSSTAT00 into ZRSSTAT00 and modify corresponding.
*& Report ZDSAP *
REPORT ZDSAP .
DATA: d_ref TYPE REF TO data,
d_ref2 TYPE REF TO data ,
i_alv_cat TYPE TABLE OF lvc_s_fcat,
ls_alv_cat LIKE LINE OF i_alv_cat.
TYPES tabname LIKE dcobjdef-name .
parameter: p_tablen type tabname.
data: begin of itab occurs 0.
INCLUDE STRUCTURE dntab.
data: end of itab.
FIELD-SYMBOLS : <F_FS> TYPE table,
<F_FS1> TYPE TABLE,
<F_FS2> TYPE ANY,
<F_FS3> TYPE TABLE.
REFRESH itab.
CALL FUNCTION 'NAMETAB_GET'
EXPORTING
langu = sy-langu
tabname = p_tablen
TABLES
nametab = itab
EXCEPTIONS
no_texts_found = 1.
LOOP AT itab .
ls_alv_cat-fieldname = itab-fieldname.
ls_alv_cat-ref_table = p_tablen.
ls_alv_cat-ref_field = itab-fieldname.
APPEND ls_alv_cat TO i_alv_cat.
ENDLOOP.
internal table build
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = i_alv_cat
IMPORTING ep_table = d_ref .
ASSIGN d_ref->* TO <F_FS>.
SELECT * FROM (p_tablen) INTO CORRESPONDING FIELDS OF TABLE <F_FS>.
LOOP AT <F_FS> ASSIGNING <F_FS2>.
*your code goes here.
ENDLOOP.

Create a listing of reports with last run date and # of times run

Hi All,
I want to create a listing of reports with last run date and number of times report is run in the past 18 months.
If anybody can please help me with the query for the same.
Regards,
Sk
Edited by: user10989244 on Aug 18, 2009 7:12 AM

Hi Sk
Assuming you have the collection of statistics enabled, which it is out of the box, you can get the information you need from the EUL5_QPP_STATS table. This script will help:
SELECT
QPP.QS_DOC_OWNER WORKBOOK_OWNER,
QPP.QS_DOC_NAME WORKBOOK_NAME,
QPP.QS_DOC_DETAILS WORKSHEET_NAME,
QPP.QS_CREATED_BY RUN_BY,
TRUNC(MAX(QPP.QS_CREATED_DATE)) LAST_USED_DATE,
COUNT(QPP.QS_ID) TIMES_USED
FROM
EUL5_QPP_STATS QPP
WHERE
QPP.QS_CREATED_DATE >= ADD_MONTHS(SYSDATE, -18)
GROUP BY
QPP.QS_DOC_OWNER,
QPP.QS_DOC_NAME,
QPP.QS_CREATED_BY,
QPP.QS_DOC_DETAILS
ORDER BY 1,2,3;
Best wishes
Michael

Calculating 60 days from last run date and sum a total for those 60 days

I need to calculate 60 days from last run date (I will create prompts), then take that number to sum a total of items.
Can someone be of assistance.

Hi,
You can create a calculation to calculate 60 days before your run date. e.g. if rundate is your date item then the calculation will be:
rundate-60
Rod West

Last run date & time & multiple files handling

Hi frnds,
i am working on an outbound interface in which i am retrieving data from custom db table,processing it with other db tables and writing the final output into a file into the application server and updating the custom db table.
Now i have an issue here when i am giving plant as input in selection screen (select-options), i should also get those plants from my custom table which have no last run date and time.
How to get that?
Next part of my question is for multiple plants entry,multiple files have to created in application server.
Presently, i have concatenated the file path n name.Do i need to loop the same with s_werks.Will it work
Also i used an internal table for update data storage.When multiple plants are their how to handle the updation.
Rgds,
Simran

Hi.
In ur reply i did'nt understood two things
1) this is how i'm doin the selection
    select lt_run_dt
           lt_run_tm
    into table itab1
    from z_table
    where prog_name EQ sy-repid
    AND   plant IN s_werks
will it give me plants whose last_run_date and last_run_time are not in the z table?
2) If you are going with select-option from parameter, then if you have to write a FILE per PLANT. Then you can loop at plant->extract the data-> write to app server-update z table->end loop
Does that means:
loop at s_werks
open dataset
transfer
modify
endloop
Kindly clarify to solve this issue.
Rgds,
Simran

Help find the Last run date from previous month

Hi all
I am stuck trying to find the Last Run Date from the previous month.
select distinct(date_ran) from TABLE X where date_ran like '%/11-%' order by date_ran desc gives
"03/30/11-06:19
"03/25/11-03:01
"03/24/11-03:00
"03/23/11-03:00
"03/22/11-03:00
"03/21/11-03:00
"03/18/11-03:00
"03/17/11-00:00
"03/16/11-06:31
"02/15/11-07:42
"02/15/11-06:00
"02/14/11-08:19
Here the result I am trying to acheive is 02/15/11-07:42 ;Note the column date_ran is a VARCHAR2(255) and not a TIMESTAMP
I tried
select ADD_MONTHS(to_date(max(date_ran), 'MM/DD/YYYY-HH24:MI'),-1)
from daily_tests_a
where date_ran like '%/11-%'
order by date_ran desc
which returns 2/28/0011 6:19:00 AM and that is not the result I am looking for
Regards
SMK

Welcome to the forum!
user2931503 wrote:
Hi all
I am stuck trying to find the Last Run Date from the previous month.
select distinct(date_ran) from TABLE X where date_ran like '%/11-%' order by date_ran desc gives
"03/30/11-06:19
"03/25/11-03:01
"03/24/11-03:00
"03/23/11-03:00
"03/22/11-03:00
"03/21/11-03:00
"03/18/11-03:00
"03/17/11-00:00
"03/16/11-06:31
"02/15/11-07:42
"02/15/11-06:00
"02/14/11-08:19
Here the result I am trying to acheive is 02/15/11-07:42 ;Note the column date_ran is a VARCHAR2(255) and not a TIMESTAMPThat's a very bad idea. Points in time should always be stored in DATE (or maybe TIMESTAMP) columns. If not, you're going to waste resources converting them to DATEs whenever you need them to behave like DATEs, and risk run-time errors because of bad data.
Normally, the "previous" month means the month before the current month. In April, the previous month is March.
By "previous" month, do you mean the 2nd latest month in the table? That is, this data contains data from February and March, 2011; March 2011 is the latest of those months, February 2011 is the next-to-last, and so is that why you want a date from February?
I tried
select ADD_MONTHS(to_date(max(date_ran), 'MM/DD/YYYY-HH24:MI'),-1)
from daily_tests_a
where date_ran like '%/11-%'
order by date_ran desc
which returns 2/28/0011 6:19:00 AM and that is not the result I am looking for
Regards
SMKTry this:
WITH got_real_date AS
 SELECT TO_DATE ( SUBSTR (date_ran, 1, 14)
 , 'MM/DD/RR-HH24:MI'
 ) AS real_date
 FROM table_x
-- WHERE ... -- If you need any filtering, put it here
SELECT TO_CHAR ( MAX (real_date)
 , 'MM/DD/RR-HH24:MI'
 ) AS last_date
FROM got_month_num
WHERE real_date < (
 SELECT TRUNC (MAX (real_date), 'MONTH')
 FROM got_real_date
;Edited by: Frank Kulash on Apr 5, 2011 3:59 PM

Does ODI keeps the record of last run date of interface?

Target:Oracle
Source:MS SQL
ODI:11g
My requirement is I have a source table, Whatever operations performed on that (like insert,update etc) table, I want to load those records into the target table. For that I have created an Interface which runs daily at 6 PM.While loading, I have put one filter which loads only those data which got inserted/updated on current date(GETDATE()).Suppose the case, If my ODI has been down(because of any reason) since 3 days. In this case I have no option to load the records who got changed in that three days. On the fourth day I start the ODI then, how can I get data which got changed in last three days.
Is there any place where ODI keeps the record of last run date or something of interface ?
If I use CDC in that case, once the ODI down then the journalism can not able to keep the changed data info.
How can I load the changed data into the target.?
Thanks,
Shrinivas

If you have a date column in source and target , I guess you might be having a you are using date , you can use a filter and write the expression like this
Source_date > (select max(date_created/update) from schema.target_table)
I have validated this expression and it validated by ODI , I did not try running it , please give it a shot
Suresh

BI Report information :Report technical name - Report name - Last run date

hi,
I want to know how we gather the information about the total reports present in production environment in following format.
Report technical name - Report name - Last run date
I know a table RSZCOMPDIR where we can find technical name and last run information, but this table does not give Report name.(description)
Is there any other table which can give me this information???

Hi Amruta,
check the following forum link which is already posted . probably it will help.
[How to find out Query last used by whom|How to find out Query last used by whom]
Regards
Sree

How to get the last run date of an ISchedulerTask ?

Hello,
I have implemented an ISchedulerTask and inside the run method I would like to get a reference to the last timestamp/date that the task was running, any idea how to achieve that?
Rgds,
Roy

Hi
You can create a custom metadata property and set this property with the date when the Ischedlar task runs.
So, in your code you can read this property whenever you want to read the previous date.
Hope this works.
Thanks
Puneet

Last Run date and User name for a transaction

Hi All,
How to find the User who has last run a transaction?
I have searched the forum and the Tcode STAT and STAD doesnot help me. Any other pointers please.
Thanks

Thanks for sorting this out... please keep it civil (otherwise it will simple be deleted).
As far as I know, the problem here is the "translation" and "aggregation".
There are some good blogs on this if you use the search and read the other blogs.
Search terms such as "STAD" and "MONI" will help further (and not "flood" the search results).
There is no need for a flame war about this, and possibly no need for the original question.
My recommendation:
- A light and friendly introduction to "the search" and "the rules" is okay.
- A short tip on search terms and some infos which are helpfull or based on experience (not help.sap.com) are okay.
- If people are hard of hearing or abuse the forums => use the "Report Abuse" button.
Please respect the forum rules individually.
Cheers,
Julius

Saivng last run data in Power Pivot

Hi All,
I am using cube as a source for my power pivot reports.
Suppose I create a report and I run it on a monthly basis using power pivot technology.
My first run suppose is on 1st Jan 2014 and if I will run the report on 1st Feb 2014 again, it will overwrite the previous data which I got on 1st Jan 2014.
Is there any option to “Do not refresh automatically” or save the previous state of data without overwriting it.
Thanks
Syed Faiz
SFH

Hi Syed,
Generally, we focus on historical data BI analysis in most cases. If you want to review previous historical data in your report(such as PivotTable, Power View and so on), we should consider implementing Time Intelligence/Filter/Slicer for your scenario.
Regards,
Elvis Long
TechNet Community Support

DS 4.2 get ECC CDHDR deltas in ABAP data flow using last run log table

I have a DS 4.2 batch job where I'm trying to get ECC CDHDR deltas inside an ABAP data flow. My SQL Server log table has an ECC CDHDR last_run_date_time (e.g. '6/6/2014 10:10:00') where I select it at the start of the DS 4.2 batch job run and then update it to the last run date/time at the end of the DS 4.2 batch job run.
The problem is that CDHDR has the date (UDATE) and time (UTIME) in separate fields and inside an ABAP data flow there are limited DS functions. For example, outside of the ABAP data flow I could use the DS function concat_date_time for UDATE and UTIME so that I could have a where clause of 'concat
_date_time(UDATE, UTIME) > last_run_date_time and concat_date_time(UDATE, UTIME) <= current_run_date_time'. However, inside the ABAP data flow the DS function concat_date_time is not available. Is there some way to concatenate UDATE + UTIME inside an ABAP data flow?
Any help is appreciated.
Thanks,
Brad

Michael,
I'm trying to concatenate date and time and here's my ABAP data flow where clause:
CDHDR.OBJECTCLAS in ('DEBI', 'KRED', 'MATERIAL')
and ((CDHDR.UDATE || ' ' || CDHDR.UTIME) > $CDHDR_Last_Run_Date_Time)
and ((CDHDR.UDATE || ' ' || CDHDR.UTIME) <= $Run_Date_Time)
Here are DS print statements showing my global variable values:
$Run_Date_Time is 2014.06.09 14:14:35
$CDHDR_Last_Run_Date_Time is 1900.01.01 00:00:01
The issue is I just created a CDHDR record with a UDATE of '06/09/2014' and UTIME of '10:48:27' and it's not being pulled in the ABAP data flow. Here's selected contents of the generated ABAP file (*.aba):
PARAMETER $PARAM1 TYPE D.
PARAMETER $PARAM2 TYPE D.
concatenate CDHDR-UDATE ' ' into ALTMP1.
concatenate ALTMP1 CDHDR-UTIME into ALTMP2.
concatenate CDHDR-UDATE ' ' into ALTMP3.
concatenate ALTMP3 CDHDR-UTIME into ALTMP4.
IF ( ( ALTMP4 <= $PARAM2 )
AND ( ALTMP2 > $PARAM1 ) ).
So $PARAM1 corresponds to $CDHDR_Last_Run_Date_Time ('1900.01.01 00:00:01') and $PARAM2 corresponds to $Run_Date_Time ('2014.06.09 14:14:35'). But from my understanding ABAP data type D is for date only (YYYYMMDD) and doesn't include time, so is my time somehow being defaulted to '00:00:00' when it gets to DS? I ask this as a CDHDR record I created on 6/6 wasn't pulled during my 6/6 testing but this 6/6 CDHDR record was pulled today.
I can get last_run_date_time and current_run_date_time into separate date and time fields but I'm not sure how to build the where clause using separate date and time fields. Do you have any recommendations or is there a better way for me to pull CDHDR deltas in an ABAP data flow using something different than a last run log table?
Thanks,
Brad

Publication with WebI report including all transactions from last run

Hi,
using BOE XI R3 FixPack 4.
I want to create a WebI report that should include all data newer than last run time for the publication.
How do I get last run date for a publication or WebI report?

Hai,
Along with Java version you can also take of refreshing data properly.After modification remove everything from the report and again drag data from data tab into the report.

Maitaining Last Run Date!

Similar Messages

Maybe you are looking for