Major problems with Wireless Network

Hi,I currently have a network that has 7 Cisco aironet 1200 devices on it.(2 of which are repeaters)The network has been stable for months untill recently..At random times different waps will just go down. They will occasionally come back on themselves but I usually have to do a power cycle. Also sometimes they will just not accept clients, again until a power cycle.We have 2 main devices that generally have around 15 devices on each. This morning one of them had 25 clients, and the other had 4. Then when I checked later this had been reversed.When the waps go down, there is nothing that jumps out in the logs(to me anyhow) some "Interface Dot11Radio0, Deauthenticating Station Reason: Disassociated because sending station is leaving (or has left) BSS" messagesAny tips on what could be wrong or where to look first?Its doing my head in..Cheers

Are you in a large office complex? Any chance some network admin in an adjacent building/floor just installed a system that can terminate your APs as if they are rogues? Have you ran any tools to look at interference? Have you tried running a packet sniffer?

Similar Messages

HP 175nw Problems with Wireless Network Connection - Mac OS X 10.8.3

Please help!
I have an HP 175nw, from one day to the next it decided it was no longer going to connect to the wirless connection.
I run a Mac on 0S X 10.8.3.
I can't find the installation software (the whole software not just the driver) on the web and the CD is worthless b/c this is a Mac.
I installed the printer on my windows laptop and it works fine, it connected to the wireless network using the setting sets on my laptop, it now prints wireless no problem, but not with the Mac.
I have plugged the printer directly into the Mac but the Mac doesn't even seem to recognize it. The printer shows up on my printer list but when I try to print or scan from it the Mac says the printer is offline.
I need this printer/scanner for work desperately, Any ideas would be greatly appreciated.

First, download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Next, download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-107394-1&cc=us&dlc=en&lc=en...
What router are you using?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

X201 running Windows 7 Home Premium problem with wireless network adaptor

my x201 shows that my wireless is on and my wireless network is available. it keeps trying to connect but is not able to hold a connection (continuously trying and failing). i'm on windows 7, 32 bit, home premium. i downloaded the latest update for the intel wireless today but it's still not working. any ideas?

1) This could be a software problem, so try to uninstall the Wireless card software, and reinstall.
2) If that fails, then try to do an OS reinstall.
3) If OS reinstall fails, then it is a hardware problem, which most likely you need it replaced (if you are under warranty, then call the warranty support, if not then you can source a Lenovo branded wireless card for your machine).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

T520 problem with Wireless Network Connection Adaptors

I was in Windows 7 Device Manager's Network Connections trying to fix a minor WIFI problem by uninstalling the drivers and then scanning for hardware changes to reinstall them. I uninstalled a driver that the scan didn't pick up to reinstall, and I didn't write down its name. Now the WIFI does not work at all. I've updated the two drivers left in Network Adapters:
Intel 82579LM Gigabit Network Connection for my ethernet
Intel Centrino Ultimate-N 6300 AGN for my WIFI
Does anyone know the name of the wireless driver I uninstalled? Does the 520 require two wireless network adaptor drivers? Can't seem to find info on it anywhere!
What I've done:
I ran Intel's PROSet/Wireless WiFi Connection Utility diagnostic tools. The hardware test fails saying "Wireles Hardware is not boudn to transport driver". The Driver Test passed saying "Driver is loaded. Netwsw00 Version: 15.4.1.1. The Radio Test failed saying "Failure geting network radio status!". After that the Scant Test, Asociation Test, Authentificaiton Test, Siganl Test and Ping Test all failed.
Installed every 64 bit LAN wireless network adaptor driver I could find in the T520 section of Lenovo's site
Any assistance appreciated. I'm a bit of a noob.
Thanks
T520 4239 CTO
Windows 7 Home Premium 64 bit

Here is the list.
Try scan for new devices in Device manager otherwise you likely have to reinstall the package again.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3
Attachments:
NA.jpg ‏29 KB

Safari and Firefox problems with wireless network

I have seen similar questions to mine on the forums recently. Here's my story: I have 5 month old Mac Book with Leopard, no airport extreme, just the inbuilt Airport card. I connec through the internet with Netgear. I have been on to Apple support who went through all the checks, nothing wrong they say, and suggest I contact Netgear. This I did, rebooted router, switched on/off, updated firmware. And still the same problems - pages ultra slow to load, messages saying I am not connected to the internet but running network diagnostics informs me I am. I have to resend pages three times to get them to load. It's driving me nuts. A couple of things then: should I check the box for 'remember password in keychain' when I'm loggin on to my own secure network? Maybe the keychain not remembering is slowing it down. I also read that with one of the key chain updates (I update automatically so I presume I did this some time back) the airport card might not work, and safe restart is required. Do I need to do this?
I know Apple don't take responsibility for third party equipment, like the Netgear router, but my mac worked amazingly with the internet until about 2 weeks ago, and I have updated everything with Netgear. Any ideas?

I believe the WebKitPlugInHost needs to be updated for Safari as It crashes whenever I am playing FarmVille on FaceBook.

Huge problems with wireless, would need some help

Sorry for the bad topic, and sorry for my english.
And now the problem.
I have just bought my first laptop, and got almost everything to play nice in arch, except the wireless.
My card is a Intel PRO/Wireless 3945ABG (iwl3945), and i have a Dlink 524 router (abg).
Using WAP, but can change this if its help.
Right now I'am using NetworkManager (0.6.5-3 from rep) and KNetworkManager (from AUR), and it works very very bad.
It can't connect at startup (or atleast it doesn't...), it takes several attempts to get a connection, it drops the connection and dont reconnect when it does, and so on. Its almost unusable and force me to use wired a connection just to be sure to be able to write this.
After what i read in different forums and mailinglists, there seems to be a lot of problems with wireless at the moment?
Anyone got this combination to work fine? Or are there any other way of configuration i should try? Suggestions?
Thanks in advance!

I've had a lot of problems with wireless networking for several weeks recently, ever since I upgraded vanilla kernel26 from v.2.6.22 to v.2.6.23 (see http://bbs.archlinux.org/viewtopic.php?id=40145). I'm using the Windows driver bcmwl5 for the Broadcom 4311 chipset via Ndiswrapper, and I'm using WPA-PSK (TKIP) encryption. I also use a D-Link DI-524 router. What finally cured the problem was to install the new wicd (v.1.3.1) network manager which is now in extra and to set up all networking interfaces in that GUI, abandoning using Arch network profiles and all the detailed setup in /etc/rc.conf.
My /etc/rc.conf now only contains (I'm only showing entries pertinent to networking)
MODULES=(ndiswrapper capability sg acpi-cpufreq cpufreq_ondemand cpufreq_performance cpufreq_powersave)
HOSTNAME="RFDellLT"
DAEMONS=(syslog-ng @nfslock @nfsd @netfs @crond !network hal cpufreq portmap wicd sshd cups alsa @openntpd privoxy)
i.e. no more INTERFACES, not even "lo", gateway, ROUTES, NET_Profiles. Everything is set up through wicd. You only need to put the wicd daemon in the DAEMONS array (after hal which also loads dbus), and the network daemon isn't needed anymore. Also you should uninstall any other networkmanager.
To put the wicd icon in the system tray, create a shell script (give it any name) in the .kde/Autostart/ directory in your home directory (if you use KDE, otherwise do the equivalent thing for any other DE/WM) that contains the command /usr/lib/wicd/tray.py.
You may want to try wicd, perhaps it'll fix your problem. It certainly has gotten good press in this forum.

Impossible connecting with wireless network Netgear WNR 2000

I can not log on to my wireless network (Netgear WNR 2000) with my macbook. My other PC:s work fine and connect always. My Macbook only connect after I have restarted the router. When I use my Macbook in other places I can connect with wireless network. What is the problem?

I'm assuming that you're using the right network password! After that, the most common causes of difficulty are:
- The router not set up for DHCP and so cannot allocate an IP address to the MacBook
- The router has "MAC" Address Authentication (a security feature - don't mistake MAC for Mac[intosh]) turned on and the AirPort MAC address isn't in the pass list.
- The default "Automatic" location in System Preferences > Networks has been modified so that it no longer works.
Bob

I have problem with wireless print HP after iOS 7 !? What can i do

I have problem with wireless print HP after iOS 7 !? What can i do?!

Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

Major problems with CS5

We just moved to CS5 and are having major problems with crashing and losing text. I haven't seen these kind of issues since beginning the Indesign/Incopy workflow way back in CS2. I've got dozens of users (Indesign and Incopy) slamming me with complaints of crashing. Indesign crashes when exporting to Incopy (usually when exporting a layer), Incopy users are complaining of crashing when peforming copy/paste either from Word or from within Incopy. Also have had incidents where the text in the Incopy story just disappears or the stories corrupt and will not open in the layout or as a standalone file. Trying to open one will crash the application.
Other departments in our organization who do not use Incopy are not experiencing crashing issues with Indesign CS5, so I have to believe the problem is Incopy.

Try moving everything to a local harddrive and working on a file there. If you don't get the crashing then you can start checking the network. And please, one thread is enough.
Bob

Problems with wireless internet on Imac

I have an IMAC since just over a year (MAC OS X vs. 10.6.6), and I have had over the last couple of months lots of problems with wireless connection.
Sometimes it connects without problem, but mostly I have to follow a 'Diagnostic Info' process: I select Airport, then select the wireless network, then have to restart, and then all lights turn green. I can connect then and only after a minute the pages do not load anymore.
Can anyone give me some troubleshooting tips ?

You could also have look at this thread: http://discussions.apple.com/thread.jspa?threadID=2790214&tstart=0
which has a couple of links I posted that may help troubleshoot your problem.
Rick's suggestion at looking at changing channels seems to be a good starting point.

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?

try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard)

10.9.3 = major problem with fast user switching

I've found a major problem with the 10.9.3 update with my 27" iMac, you probably won't see it if your on a laptop. I did all the updates in past few days i.e., 10.9.3 combo update, iTunes 11.2.1.
Afterward I noticed a bug when Fast User Switching i.e. FUS. I have 5 accounts but the bug can be replicated with only 2.
I login to userA have some windows open but you can just open a Finder window. Now make the window at least half the with of the screen and move it to the right side of the screen. Then login in to userB and setup the windows the same way as userA. Now FUS to userA and then back to userB. You will notice that the Finder window has been moved to the upper left corner of the screen. This problem happened's to all user accounts you login to except the first account you logged into.
Since I didn't know what update caused the problem I had to use Time Machine to revert to my last version of 10.9.2. I then double checked the for the bug and sure enough everything was working fine. I now was going to install one update at a time and to see which one was causing the bug. So I installed 10.9.3 first and found the bug immediately.
I now know what's happening. When the switch occurs the screen is resized to about the equivalent of a 13" MBP. At this point the windows that fall some ware outside that size get moved to the upper left corner and resized. Then the screen resizes to normal but it's too late, all the window have moved and been resized to fit the 13" screen size.
You can reproduce this effect by going to System Preferences and selecting Display and then select the Scaled radio button. No select the smallest size, say, 1280 x 720. Now select the Best for display radio button again. You will now see all the windows you have open that were too big no moved and resized to the upper left corner. I know why the Mac moves the windows, it's so you don't have any windows stuck off screen.
Now when I say 13" it could be some other size but it's about that size give or take.

Yes, it's when you user Fast User Switching.
Here's snapshot before the screen resized. Ignore the window in the lower right, I moved it from the upper left before taking the screen shot.
I hate to say it but I'm glad I'm not the only one with this bug.

Time Machine and "might be a problem with your network"

Hi! My Power Mac is from 2008, and I'm in the middle of replacing my hard drive. Here's a summary of what I've gone through, including various trouble shooting...
OK, the hard drive dies (all of which I wrote about in an earlier thread and, I think, not very relevant for this thread). While waiting to buy my replacement, I created an external bootable drive, hooked up via FW800. I created a new User Account, and then I used the Migration Assistant to bring in all the user settings, files, etc, from my Time Machine. It took many hours and and during the stage when it was transferring files, it gave me the prompt: "There might be a problem with your network. The other Mac is not responding. Make sure that all of your network devices are connected and turned on. Also, make sure that your Ethernet cables are still connected properly to your computer and to the network, or if using AirPort, that the base station is in range and turned on." After clicking "Continue" got me nowhere, I clicked Cancel, and it was a very incomplete migration [no apps, no files]. I didn't sweat this since this external drive is a temporary solution anyway.
Tonight I came home with the new internal drive, installed it, installed Leopard, and began the Setup Assistant. I got the same prompt as last night. NOTE: This time with Setup Assistant; last night was with Migration Assistant.
I notice from reviewing the boards that this Time Machine glitch seemed to happen a few years ago, in Leopard, and maybe hasn't happened since. But I haven't read a thread with a solution. (Maybe I missed it?)
A few things come to mind:
1. Could there be an issue with the fact that the computer is only 10.5 and many of the files/apps may have been installed when I was running 10.5.8? I'm just tossing that out there. For instance, what if I set up an initial User account, then updated the software to 10.5 and THEN used Migration Assistant to bring in the older account?
2. Soon, since I'm reinstalling Leopard, I'll get the prompt to use Setup Assistant, and this time I'll just select account settings and apps. I'll bring in the files manually, later. Since the progress window seems to get hung up during the file-transferring stage, maybe I'll have better luck if I skip that.
If anyone has any suggestions, man, I'd be way grateful!
Thanks!

"try trashing the timemachine.plist in your original user's Library>Preferences."
I didn't even get to that step. Here's what happened.
I went back to my original Admin account (the one I restored via Setup Assistant, from my Time Machine backup), and ran Migration Assistant again. I selected Applications only and when it gave me a prompt about the account name already existing. So, I created a new account name (TEMP 1, I called it).
All of my applications were restored.
Next, I tried it with all the files and folders. It didn't give me the duplicate name prompt this time. It copied all my flles and folders over.
Was it perfect? Well, a lot of the apps need some fresh registration and some upgrading, but I suppose that's to be expected. Or is it?
While I feel like this problem is in my rear-view mirror, I'm still interested in your suggestons for a Time Machine altenative.
Thanks again for your advice!

I am having major problems with my trackpad on my macbook pro. I can no longer press down on the bottom left and right corners for it to click and follow my command. Please can anyone help?

I am having major problems with my track pad on my macbook pro. Even though my settings haven't changed...my trackpad is no longer responding as it did before. The left hand corner no longer clicks when I press it and my personal commands which I set up in preferences no longer seem to be workin. Please help!

Some websites have an internal mute or volume setting. If that's not the issue, see below.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane.

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

Major problems with Wireless Network

Similar Messages

Maybe you are looking for