Major weird problems with new msi p6n diamond

okay let me start with my specs
q6700
gskill pc8000 memory. 2gigs. tryin for 8gigs
right now single 150gig hdd. 4x150 gig raptor
dual 8800gts in sli
enermax galaxy 1kw psu
bigwater 760i water cooling
okay. well i built the computer about 2 weeks ago and since then its been nothing but problems. first i built it liek normal and didn't know about the patch for more memory. So after knowing that i used the patch and was able to boot vista 64bit. then the fun started. I havent been able to do anything related to 3d work since i built it. i used the latest drivers. I used the ones from the first reviews of the 8800gt. I used only one card. etc. Nothing works. wow freezes up. Age of empire 3 ad 2 freezes or plays at like 4 fps. 3dmark cant run at all. I finally got it stable to run and it only gives me 3000 for a score in 03. I decided to boot up with my old 1900xtx and sure enough after putting the new ati drivers. 22000 on 3dmark 03 and even crysis atleast runs well enough to play. I have a single slot intel board which i got with my bundle and havent tried but i was about too. I have the memory set at the manual settings it asked for. also did auto and most basic things possible. nothign seems to work. has there been any issues with the gt's. what other help can y'all give me.

It looks like power cable(s) is not plugged to VGA(doesn't get enough power and slowdown{decrease freq. automatically})
(Provide screenshot from Everest(http://www.lavalys.com:8081/beta/everestultimate_build_1217_x0cm3svydaq.zip)GPU page.
Have you tried with each one of them (you said that have 2x8800GT) individually?If yes does it happend there too?
Test VGA in another machine.
Quote from: BOSSKILLER on 15-December-07, 14:04:20
BIOS version onboard?
Use Driver Sweeper(http://downloads.guru3d.com/download.php?det=1655) to remove currently drivers.(Make sure that you have installed chipset drivers 1st)
Then Install 169.21: https://forum-en.msi.com/index.php?topic=112805.msg844890#msg844890

Similar Messages

Any News (MSI) P6N Diamond (680i) SLI Motherboard

Any one know about the release of (MSI) P6N Diamond (680i) SLI Motherboard

Quote
honestly, if it's not for SLI, I think I'll wait for ATI, ops, AMD RD600 chipset mobo instead.
I complete agree with that. Just getting bored with the Opteron system. I have an insider I am getting a e6600 from for 1/2 price this week, so I was looking at boards. Think I want to try the 680i over the 975, and while the RD600 looks like it will be a winner it's still a ways out.
MSI had stated end of December for the P6N and that time is upon us.
Honestly after the last purchase I swore I would never buy another MSI, but I kind of crave pain that way, after about a year of mods on this current board, and emails with the MSI BIOS crew I think the K8N SLI was the 2nd best Nforce 4 board made out there. Plus it gives me another forum area to read here beside the Nvidia, and overclocking sections.

Problem with new MSI GeForce FX 5900

Just bought a new MSI GeForce FX 590 TD-128.
I removed previous drivers and video card, installed the new video card and attached the power cable, and booted my machine.
When I boot the machine I get no picture....just a blinking cursor in the top left hand side of the screen. I thought maybe it was a power supply issue (350W PSW), so I tried installing the video card in another machine with a 400W PSW. I get the same darn blinking cursor X(
Anyone have any ideas what causes this? Do I have a defective card?

Quote
Are both those boards AGP 3.0 ??
I have a Soyo Dragon K7V Dragon+ and a ECS K7S5A. The website for the Soyo board is:
http://www.soyo.com.tw/products/proddesc.php?id=37
It mentions a Universal AGP Pro Slot and support for AGP 1X/2X/4X...but no mention of AGP 3.0.
The ECS board is at:
http://www.ecs.com.tw/products/pd_spec.asp?product_id=192
and only mentions AGP 4X support.
Does the FX 5900 only work on the newer motherboards maybe?
Quote
If it doesn't work on any board then it might be bad, but 350w and 400w don't mean much so it's also possible you have a power problem.
Both power supplies are made by Antec. Seems unlikely that neither machine would even boot...but I've seen stranger things
Ideas?

Major metadata Problem with new Pages(v4.3) epub export

Iam are very disappointed with new Pages update (4.3). After new Pages update, when i want to export a book into epub, and upload book in iBookstore iTunes Producer cancels it, because of ERROR: /OPS/cover.xhtml(5,458): element "div" not allowed here; expected the element end-tag, text or element "a", "abbr", "acronym", "applet", "b", "bdo", "big", "br", "cite", "code", "del", "dfn", "em", "i", "iframe", "img", "ins", "kbd", "map", "noscript", "ns:svg", "object", "q", "samp", "script", "small", "span", "strong", "sub", "sup", "tt" or "var" (with xmlns:ns="http://www.w3.org/2000/svg"). Previously i did not have any problems with uploading the epubs produced in Pages (4.2). I checked our epubs using epubchecker and i think, that new Pages (4.3) makes incorrect HTML elements in epubs, which i want to export.
Please, send me some feedback and Apple - fix this problem.!

VikingOSX wrote:
Have you tried creating your content in Pages v4.3 and transferring it into iBooks Author 2.0. Let the latter export your epub, which may be a newer epub standard than what Pages may incorporate. See if this epub satisfies the iBookstore iTunes Producer file requirements.
iBooks Author can't produce .epub, only a special .ibooks format that can't be read on any device other than an iPad. But should certainly satisfy the ibookstore.

MOVED: Any News (MSI) P6N Diamond (680i) SLI Motherboard

This topic has been moved to Intel Core Duo and Core 2 Duo based boards.
https://forum-en.msi.com/index.php?topic=103656.0

Quote
honestly, if it's not for SLI, I think I'll wait for ATI, ops, AMD RD600 chipset mobo instead.
I complete agree with that. Just getting bored with the Opteron system. I have an insider I am getting a e6600 from for 1/2 price this week, so I was looking at boards. Think I want to try the 680i over the 975, and while the RD600 looks like it will be a winner it's still a ways out.
MSI had stated end of December for the P6N and that time is upon us.
Honestly after the last purchase I swore I would never buy another MSI, but I kind of crave pain that way, after about a year of mods on this current board, and emails with the MSI BIOS crew I think the K8N SLI was the 2nd best Nforce 4 board made out there. Plus it gives me another forum area to read here beside the Nvidia, and overclocking sections.

Problem with new MSI GTX660Ti N660TI-PE-2GD5/OC

Hi , I've just bought a new MSI GTX660Ti GPU from amazon , i was previously running the on board HD4000 graphics from the Intel I7 3770K CPU.
When i plug the new GPU in and reboot - i get the 'GIGABYTE' splash screen on my monitor , and it just hangs there -I am unable to enter any of the options and pressing DEL , F8 , F12 etc gives no response.
I've installed all the drivers , and i simply switch off the PC , installed the graphics card , take the DVI cable out of the mobo socket and plug it into the GPU socket then switch on.
The bios beeps once , the display remains frozen on the splash screen for about 3 minutes , then another single beep from the bios and the display remains frozen on the splash screen for another4 or 5 minutes , then eventually the screen goes black , with just a single flashing underscore. No keyboard inputs make any difference.
re-booting just gives the same result.
BIOS settings are all at default Including > Init Display First - Auto , Internal Graphics - Auto
So , is there something that i'm doing wrong or is the new graphics card DOA ?
Please help
Many thanks
Lee
MoBo: GA-Z77X-UD5Hv1.0 Bios version - F8
CPU: CORE I7 3770K
Power Supply:Coolermaster Pro 600W modular PSU
Ram: G.SKILL Ripjaws Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333
Samsung 256GB SSD + 2 x Seagate 2TB HDD's
Video Card: MSI GTX660Ti N660TI-PE-2GD5/OC

Success !!
That seems to have done the trick , New GPU installed & everything appears to be working as it should now. I feel such a squid for not checking for BIOS updates !
oh well , all's well that ends well . Thanks very much for you help (and your patience !)
I really appreciate it.
Lee
MoBo: Gigabyte GA-Z77X-UD5H Wifi. Bios version - F14
CPU: Intel Core i7 3770K 3.4GHz Socket 1155 8MB Cache
PSU:Coolermaster Pro 600W modular PSU
GPU MSI GTX660Ti N660TI-PE-2GD5/OC Driver 314.07
Ram: G-Skill 16GB (4x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V
Samsung 830 256GB SSD + 2 x Seagate 2TB HDD's

Problem With New Msi Fx 5900xt SOLVED

I JUST OPEN THE BOX AND INSTALL MY BRAND NEW FX 5900XT (YES I MANAGE TO SELL THE FX5700 TO A FRIEND ) AND MAKE IT RUN NICE :biggthumbsup:BUT HAVE TWO ISSUES
1. CAN'T OVERCLOK
2. I DID NOT FIND WHERE THE MONITOR TU TEMP AND FAN RPM ARE
I INSTALL 3D TURBO AND THERES NOTHING ABOUT RPM AND TEMP.
AND AFTER TWO HOURS OF USE THE SCREEN FILL WITH DOTS AND THE MACHINE REBOOT

To XSOFT,
I believe you have exactly the same problem as me !
Due to this excellent thread I worked out that my PSU was seriously Underpowered as is yours ! Did you realise that your Power Supply Unit is only kicking out 330.5 watts ? meaning to operate at its 'safe' max which is 70% you are only provided with 231.35 WATTS ! Anything over 70% overheats everything attached to your psu apparently !
This FX5900XT uses 70 odd all on its own ! Here are the Links I found amazingly helpfull.
http://www.jscustompcs.com/power_supply/
https://forum-en.msi.com/index.php?threadid=31880
Living in the Uk though I dont have access to buying an Enermax PSU which is highly recommended. Work out using these links what your system requires as a minimum and then add 30%. That is the figure that you need your PSU to kick out at 70% efficiency. I have upgraded to the best 550pwatt psu I can find in my area and it barely covers my min req of 372 watts !

Weird Problems With New Data Plan

Hi. I just received a new Droid smartphone and have been having a great time looking through the phone and seeing all of the cool things you can do with it. I have downloaded a couple of programs and what not by connecting to my home Wi-Fi service, but I haven't used up THAT much MB's of space. However, this morning I got a text from verizon saying that I exceeded my $15 a month Data limit, but I don't see how this is possible. When I go to my account online and check out how much I've used, it tells me I've used up about 28 MB's out of 150, which is the limit. Is this just a glitch or is it a problem I need to to address with haste? Will it add on to the bill? Also, has anyone else had this problem before?

It can take a bit of time to update, like the last poster wrote. If I can make a suggestion, though: with using a droid device, consider placing the unlimited package and cutting the loss from the increase. If you go over, even by a byte, it will charge you for another full 150MB allowance, basically eliminating the savings. The Droid devices are insatiable data hogs (it is like slop to them). I see a lot of instances where users go over this feature when attempting to save a bit of money. On the Droid phones, it is usually not worth the risk of overage.

Weird problem with power shut down msi nforce 4 platinum

recently i have flashed the latest bios 1.9 of msi nforce 4 u platinum, everything work fine untill yesterday.some stanges happened......
my power doesnt have a on and off button on it ,every time i turn off the pc , i have to turn off the power button of a socket near by the pc.everytime it works fine, but yesterday when i turn on the power on button of that socket , the pc automatic start, i didint turn on the power button of pc, what a weird problem.. also when i go into os , the system time also changed, although i can turn them back to correct one in bios and os, but when i turn the pc off , it changed again... could any one help me out , what is teh real problem of my pc. some virus ?thanks a lot.
weird problem with power shut down msi nforce 4 platinum

it seems the first question has been solved. cos today when i turn on pc, the oc set up is gone ,in bios, it back to the original set up.i cant save my oc setup, so it definitely a battery problem!!!!!!!!!!!
i take the old battery t o a saler , there they massure it with voltmeter, it shows only 0.97v, but in bios 1.6 it shows 1.82v, so waht is the real meaning of that reading num in bios for battery?it cant be the real voltage of the battery. i buy a new one ,this one is maxcell 2032 hitachi, the old one is shi t panansonic 2032 .the new one shows 3.17v with voltmeter, then i come back , installed the new battery , in bios this time it shows 2.3v in bios 1.6. so the reading num in bios for battery is definitely is not a real reading for your battery.
i will keep my pc in 24/7 using , and i will look if the battery is sable or not , cos untilll now no one come out for a real explain for this stupid battery problem of msi nofroce 4 platinum.i dont want change battery every 2 or 3month, what a real sick of this!!!!

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

MSI P6N Diamond Driver Probl

I recently was one of the brave few to order a MSI P6N Diamond motherboard. This board is only few months old if that, and of course all the drivers and bios for this board are buggy. One thing I should note about this board is if you disable the IDE controller, your cpu voltage will shoot up to .7 volts( stock is .3) and if your lucky , fry your brand new E6600 chip. (NOT COOL)?Besides that fun I will get to the point. I could of cared less about the onboard X-FI , but with PCI slots going by by and no one is making any PCIexpress sound cards (that I am aware of). I sorta figured well shoot, now I am stuck with this sound card.
At first, I was , wait its a creative labs sound blaster X-FI, those are those new ones that seem really cool (NOT). I wont lie, in games it sounds million times better then my old Audigy did, no more pops or cracks (5 year old card) the EAX effects sound more life like, 5. channels works cleaner. I was like "way-a-go creative!"? Then the problems started.
I loaded up my favorite program Fruityloo
ps.
After looking over the sound properties , I notice there was no ASIO cards to be found? Hmm.... Could? naa, no ASIO on a creative labs sound card? At first I thought I must of time warp back to the Li've! days, shoot at least I could use KX drivers make that baby work great!? This time I was left in the dark ?No problem, I will just goto creative.com and download the new drivers, forget those MSI drivers came with the board, I would rather use the manufactures drivers instead anyhow (creative). WRONG!! "setup could not find any supported devices in your system"?... Figures ?So i tryed to boot leg the drivers and force them to work , naa that wont work. So I am guessing Creative WILL NOT support this sound card because they didnt install it on to the motherboard, MSI did, they are the ones who do the driver support, go bug them! (as i would figure). MSI says "well we use there drivers off there site and make them work with our boards, they are up-to-date!" I dont know , this sucks, is there a way i can rip off the X-fi chip on my motherboard and get a refund, heck shoot me over a audigy 2 at least those work 'ok'....
?Besides that ASIO problem, I notice FEAR Combat will BSOD and sometimes say a file called "t3filt.sys" was involved, funny that file comes up as a "Sensaura" file? I have no clue what thats all about, I know this if I disable the onboard sound card from the BIOS, the system runs 00% stable, I enable it, game will randomly crash....
I do know what a computer is and how to get drivers working, but I would almost bet my problem is the driver, and not the hardware (I hope). Sean-

so how bad is it's does this mean iam SOL or what, i just got done reading one of those other threads on here about the X-FI extreme audio scam, I guess iam right up in there with the rest guys. I cant jerry rig the drivers at all, is there any third party drivers that will work?What can one do?If it comes down to it I will litterly desolider the x-fi chip off the board, no sence in having it on there if iam not going to use it?Probley snap it in half when iam done and mail it back to creative. Sean-

MSI P6N Diamond and very slow BIOS menus

I'm having problems with my new setup. My setup is as follows:
MSI P6N Diamond with 1.1 bios update
2 x OCZ Platinum Revision 2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model OCZ2P800R22GK
XION Supernova XON 600W Power Supply
Intel Core 2 Quad Q6600 (not overclocked yet, having problems whenever I change settings)
EVGA GeForce 8800GTS 640MB Video Card
I'm running Vista 32bit fine as far as I can tell, everything is pretty snappy and other programs are running fine, but the machine is very slow to post and running the bios menus is a painful process as it takes about 2-4 seconds to switch selections. I tried running the board with 1 stick of ram in slot 1, with slots 1 & 3 and all 4 and it made no difference. I had a USB card reader plugged in and then removing it seemed to make a difference for a while, the BIOS menus ran as I expected, very snappy. Also anytime I switch the CPU clock from automatic to manual the computer won't post and i have to reset the bios
Anyone have a clue what could be causing this slowness and my inability to overclock the cpu?

I will be getting the Q6600 in 1 week, :D. The new G0 stepping as well :D. I'm excited.
Are you using XP or Vista? I have had no distortion or pops with my sound. Although, from what I hear the drivers for XP or much more polished than those for Vista. This is a Creative issue, and not an MSI issue. Lots of people are having problems with Vista with the standalone Creative cards as well.
I overclocked my E6700 to about 3.5Ghz, and hit a temp wall based on my ambient temps. I probably could have gone higher if it was cooler in the room that houses the computer. Although, the temps have dropped dramatically after the AS5 has cured, probably could get it pushed up a bit higher. Hopefully I don't have problems with it when the Q6600 comes in.
If you got the older B3 stepping version, it will run a bit hotter and will be much harder to OC to higher speeds because of this. I've found the P6N Diamond to be very OC friendly and like all the options it gives. The only thing I don't like is the adjustment of the Vcore lists the # above stock, instead of the absolute #. Sometimes the Vcore it auto assigns isn't 100% correct I've heard so it'd be nice to know what that auto value is. The Vcore reading you can read in the monitor section fluctuates a hair in each direction of 1.3 for me when at stock, so I assume it was 1.3 stock.

MSI P6N Diamond - Flashing the BIOS

hi all,
I am using a MSI P6N Diamond motherboard. I have gone several years without a problem.
However, recently, I decided to upgrade from 4GB of RAM to 8GB of RAM. I confirmed with Crucial that the memory I was purchasing was guaranteed to be compatible with the existing RAM.
To that end, I flashed the BIOS to the latest version using the MSI Utility program and followed the instructions. The operation was a success.
However, after doing this I noticed that occasionally I will get a "blue screen" when Windows is about to boot. At first I thought it might be a faulty RAM module, so I removed all memory sticks except one which I have been using for years. I know that RAM module is not faulty but I ran memtest86+ to be sure and it did not report any problems. But the blue screen problem still occurs.
The blue screen doesn't occur every time, but it is rather easy to reproduce. I will likely see it at least once on every 4-5 reboots. I can't read anything because it flies by too fast.
Has anyone ever heard of such a thing when updating the BIOS on a P6N motherboard? How can I get additional information on the blue screen?

Quote from: Bernhard on 23-September-11, 11:11:46
Can you provide a screenshot of your CPU-Z memory and SPD tabs.
Note: I currently have all 8GB of RAM installed.
http://img832.imageshack.us/img832/9532/memoryaj.jpg
http://img40.imageshack.us/img40/1314/spd1.jpg
http://img405.imageshack.us/img405/6558/spd2j.jpg
http://img703.imageshack.us/img703/2730/spd3.jpg
http://img825.imageshack.us/img825/2163/spd4s.jpg
Quote from: Bernhard on 23-September-11, 11:11:46
At this stage I would recommend you flash back to the BIOS that you were running previously with success.
I would like to save this as a last resort if possible. I know that this is a risky procedure. Do I need v1.3 in order to support 8GB of RAM?
Quote from: Bernhard on 23-September-11, 11:11:46
What are the error codes of your BSODs. Bottom tight of your task bar is a little flag, left click on it and open the Action Centre. At the top of the dialog you will see Security and Maintenance. Expand the Maintenance option. Select an option called "View reliability history". Now you can click on all the red crossed items in the date/timeline and then then View the technical detail, which should include the BSOD codes wherever there are any.
I'm not sure if Vista Home Premium is different, but I don't see a flag in bottom right of the task bar. However, if I right click My Computer->Manage there is a Reliability and Performance->Reliability Monitor. I believe this is equivalent to what you are referring to, as it shows the red crossed items and shows application/hardware failures, etc. Here is a screenshot of that:
http://img813.imageshack.us/img813/2452/reliability.jpg
The problem is that it doesn't show any of the red crossed items for this issue. I have seen at least 4 or 5 of them on 9/22 but nothing is listed on that date. When this blue screen occurs, it seems to occur as soon as the "Microsoft Windows" screen appears while booting. It will show the black Microsoft Windows loading screen and the loading bar and blue screen almost immediately. Is it possible that the problem occurs too soon for it to appear here?
EDIT: I should also note that I have reformatted and reinstalled Windows but the problem persists.
Another odd issue just occurred to me but I'm not sure if it's related. After reinstalling Windows, I would get a "New Hardware found" popup box for the onboard Creative sound. I installed the Creative sound driver, but I would still get the "New Hardware found" box for the onboard Creative sound after rebooting. It looks like that problem has gone away, though.

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Major weird problems with new msi p6n diamond

Similar Messages

Maybe you are looking for