Make a pic change colour

Let's say I have a red circle and I want to turn it blue
after 10 frames or so. Is there a way to make the red fade to blue
and not immediately turn from red to blue? Thanks.

If the circle is a movie clip, use a motion tween with Tint
settings.
If the circle is just a shape, use a shape tween, changing
only the color from the first keyframe to the last.

Similar Messages

Is it possible to make a cell change colour of a period of time with rules?

Is it possible to make a cell change colour of a period of time? for example
Date
Company
Pick Up
Destination
Total
Paid
Sat, 5 Apr 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
FALSE
Is it possible for B7 to change colour if 2 weeks have passed from the date in B1 and Paid is still FALSE and green if it's TRUE?
Many thanks.

Hi NeoNapster,
This may be a start. Conditional Highlighting of a cell that depends upon the values in other cells can be tricky, but we can work on that.
Date
Company
Pick Up
Destination
Total
Weeks
Paid?
OK?
Sat 5 Apr 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
29.0
FALSE
Overdue by 29.0 weeks
Sat 4 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
3.0
TRUE
OK
Wed 1 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
3.4
FALSE
Overdue by 3.4 weeks
Wed 8 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
2.4
FALSE
Overdue by 2.4 weeks
Mon 20 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
0.7
FALSE
OK
Sat 25 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
0.0
FALSE
OK
Table with one Header Row
Formula in F2 (Weeks) and Fill Down
=DUR2WEEKS(TODAY()−A2)
That shows the Duration in weeks from the Date in column A until TODAY. You can hide this column.
Column G can contain the text TRUE or FALSE or could be checkboxes.
Formula in H2 and Fill Down
=IF(G2,"OK",IF(F2>2,"Overdue by "&F2&" weeks","OK"))
IF a cell in G is TRUE, then insert "OK". No need for any more checking.
Else IF a cell in F is greater than 2, then insert "Overdue by" and the number of weeks
Else insert "OK" (the invoice is less than 2 weeks old).
Conditional Highlighting of the Body Cells in column H. Select the cells.
Add a Rule...
text is
OK
Green Fill
Add a Rule...
text is not
OK
Red Fill.
Column H with the Conditional Highlighting rules:
OK?
Overdue by 29.0 weeks
OK
Overdue by 3.4 weeks
Overdue by 2.4 weeks
OK
OK
(And I have just discovered that colours do paste into this forum ).
Regards,
Ian.

Making buttons change colour when clicked on, sounds simple......

hello could somebody please give me the code to make a jbutton change colour when it is clicked on, muuuuuuuuuch appreciated, thanks!!!!!!!!!!!!!!!!!!!!

w e l l - k e w l !
I made a few adjustments here. Mainly for myself:- you know when you JUST CANNOT FIND THAT DARN COLOUR !!! - 'Pandavas' sexy little program is right on the button!
Click on the button and it cycles through colours randomly and tells you the RGB value ...import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ColorChanges extends JFrame implements ActionListener {
int red = 0;
int blue = 0;
int green = 0;
java.util.Random rand = new java.util.Random();
JButton button = new JButton("Colour Me!");
JLabel label1 = new JLabel("                  The new colours are:                ");
JLabel label2 = new JLabel("");
public ColorChanges() {
    super("RGB VALUES:");
    setSize(200,108);
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    button.addActionListener(this);
    getContentPane().setLayout(new FlowLayout() );
    getContentPane().add(button);
    getContentPane().add(label1);
    getContentPane().add(label2);
    setVisible(true);
public void actionPerformed(ActionEvent eve) {
        red = (Math.abs((rand.nextInt())%255));
        blue = (Math.abs((rand.nextInt())%255));
        green = (Math.abs((rand.nextInt())%255));
        cooller();
public void cooller() {
      button.setBackground(new Color(red,green,blue));
      label2.setText("RED: "+red+" GREEN: "+green+" BLUE: "+blue);
public static void main(String[] args) {
      new ColorChanges();
}

How can I make a global change so all controls and indicators labels on the front panel change to another colour?

How can I make a global change so all controls and indicators labels on the front panel change to another colour?
I need to change the front panel so that it can be used in a dark environment.

Hi
The only way I see, is to use the "Controls[]" property and iterate through all of them. But don't forget about nested elements (i.e. clusters, tab-controls, ...).
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

How do I stop text from changing colour when hovering over it?

Hello, I have downloaded a template for Dream Weaver CS6 (Which is the version i am usig). When you hover over one of the boxes the top text changes colour to black instead of staying white... does any one know how i can make it so the text stays the same colour. I will post a print screen of it.
Before clicking:
View image: 1
When hovering over it:
http://postimg.org/image/wdsii9mab/
I will post the code of the index page aswell: <!DOCTYPE html> <html lang="en"> <head> <title>Home</title> <meta ch - Pastebin.com
Any help is appreciated. Thanks.

Your unwanted pink hover color comes from style.css line 181 here
.btn_{
    background: none repeat scroll 0 0 #cf3046;    border: medium none;
    border-radius: 3px;
    box-shadow: 0 3px 5px rgba(0, 0, 0, 0.2);
    color: #ffffff;
    font-family: "Open Sans",sans-serif;
    font-size: 12px;
    font-weight: bold;
    line-height: 15px;
    margin-top: 20px;
    padding: 7px 13px 8px;
    text-decoration: none;
    text-shadow: none;
    text-transform: uppercase;

Is there a way to format multiple images at once? Change colour mode or resolution?

Is there a way to format multiple images at once? Change colour mode or resolution?

It's very easy to make an action.
Go to window > actions
In the actions panel, simply click the 'create a new action' button, it starts recording as soon as you've created it (when you've given it a name).
Now you can apply the changes you want to make to the images on the file you have opened.
After you've done all you need to do. You click the 'stop' button. The action is now ready to use. And you can apply the changes you made on all the other files.
Then you can continue how gener7 explained.
I usually include a save and close command, so that the whole batch doesn't end up opened after running the script.
But if you do that you have to create a new file, and save it to your computer before you start recording the action, otherwise the save command will be replaced by each file. And you'll end up with one edited file in the end. At least for as far as I know!

Change colour of an illustrator smart object in Photoshop

Hello, very basic but somehow has me stumped, how do I change the colour of a smart object which is in vectorised form from illustrator dropped into photoshop.
The object is all grey I'd like to change it to all black. Thanks

In photoshop, double click on the vector smart object thumbnail
in the layers panel, which will open the object back in illustrator.
Make your color change in illustrator and then File>Save.
Go back to photshop and the object should be updated with your new color.
MTSTUNER

CS3 and lightroom raw converters change colour of 5D files when importing.

The problem is that lightroom and CS3 systematically go through raw 5D..CR2 photos and change colours, even when set to "as shot". I think part of the problem is that i upped the saturation in camera, and the raw converters have been stripping this away to desaturate colours... but in doing this they have taken too much away and left photos very desaturated and looking nothing like colours that were actually there.
I have taken some with all settings on camera default, yet still there is a slight but noticable shift in colour.
anyone shed any light on this, or had similar experience.
Ali.
P.s. Using vista, but same on windows XP.

>I think part of the problem is that i upped the saturation in camera, and the raw converters have been stripping this away to desaturate colours
The main problem is that you don't understand what a raw file is...the ONLY raw converter that can read settings set on the camera (other than exposure and ISO) are those that use the camera SDKin your case, DPP. A raw file has no real rendering and the raw converter must give it one. What you are seeing change is the difference between the Canon SDK and the Camera Raw default. And note that the Camera Raw "default" is just that, a default rendering. If you don't like it, you can change it and make the changes based on camera serial number and capture ISO as well.
What you need to do is forget the camera settings (except exposure and ISO) and concentrate on learning how to use Camera Raw to get the renderings you want...

How do I change colour negative to positive?

How do I change colour negative to positive?

Using the application Final Cut Express?
Are you speaking of a film negative for a photograph?
You can edit the image to the timeline, then go Effects Tab > Video Filters > Channel > Invert and apply the Invert effect to the clip on the timeline.
Note that film negatives do not render color correctly when inverted. When they were printed, color correction "packs" were applied that were emulsion specific to balance the latent color skew present in the negative image.
So you will also need to then add the effect Video Filters > Color Correction > Color Corrector and make further adjustments.
MtD

Lightroom changes colour in my RAW files captured with NIKON D300

Dear All! Lightroom changes colour in my RAW files captured with NIKON D300. Some of the images are completely ruined. I am sure Adobe must be aware of this problem. What could be done? Is there a solution? Many thanks for your help. Regards, Stanislav

You want "something different" but this "something different" is quite hard to define.
I want a result which reflects the result on the camera. Have the feeling the display
of the D800 is not the greatest, at least (not only the color issue which is often discussed)
but also the exposure. Often I think I would need to compensate it, but then afterwards
on the computer the non corrected version looks most of the time better.
I think its interesting to see how allergic people react when the word jpeg comes up.
This is also just a rendered result, just by the camera. There are many options in my cam.
I like the vivid setting with some modifications. And that gives me a result I like.
And if I like the result, why shall I spend way more time to replicate it?
I do not talk about that I would want the jpeg, I only say that what I get color wise out of the
box is how I would like to look at it. I still want the capability to fix for example exposure in image,
but I want the base the version I got from the jpeg view (or how the Nikon raw software could do).
On Lightroom I did not manage to have a profile that looked as appealing to me.
It also consumes way more time in my workflow to fix all pictures manually and results might differ.
To work on an image you need a starting point, I do not say the jpeg look is always perfect and
what I want all the time, but most of the time it is.
You say yourself you use profiles. So why should there not be a profile which automatically adjusts to the camera settings.
Its so frustrating to see a look which you like (the preview image when the pic is first accessed) and
then Lightroom switches to its own rendering which is flat and which I do not like.
For me its clearly something Adobe and/or Nikon should fix, like the mentioned "auto correct to preview look",
Nikon profiles/settings/raw-details in Lightroom or for example a Nikon import module.

Changing Colour Display for Temperature Distribution

Hi everyone,
I am currently involved in reading a series of temperatures along a length of pipe as part of an experiment. I thought it would be a nice touch for my VI to have a diagram of the pipe which changes colour to show the temperature distribution along it.
I have attached my initial solution. I would have posted a VI snippet but this seemed to effect the my references in the property nodes.
Issues
The code 'works' in the sense that the foreground colour of each tab control will change based on the value of the corresponding temperature.
The solution does not scale well. I need 'n-1' case structures for 'n' colours/temperatures. I considered using an enum input to a single case structure, but was not sure how to compare this to the for loop index.
Unsure whether changing a tab control background is the most efficient way to do this. Not sure of an alternative.
I am looking for suggestions as to how to do this more efficiently as there will be up to 16 temperatures in the final system.
Many thanks in advance,
Pete
Regards,
Peter D
Attachments:
Temperature Display.vi ‏16 KB

Tabs are probably the weirdest choice here. Why not use e.g. a simple colorbox or button?
In any case, try to learn about autoindexing, it will dramatically simplify your code (see attached in yellow box).
I probably would use an array of clusters, each containing a colorbox and a numeric with transparent background. Modify as needed. (see attached in green box).
Of course you probably would want to make it a it prettier than my draft.
For a larger ramp, I would use a plain array of flat colorboxes. Now simply index into a color ramp to generate it according to your temperatures.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Temperature DisplayMOD.vi ‏18 KB

Apple logo screen changing colours in a loop

My phone randomly went in a loop of the apple logo (with the white background) changing colours (sometimes red, blue, grey) and I can't restore it or connect it to my computer!
Please help!

Hi gzhu22,
To troubleshoot this issue where your iPhone will not boot past the Apple logo and is showing different colored screens, please follow the directions below.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Take care,
Alex H.

Changing Colour and font of individual OAF pages

Hi,
Is it possible to change colour and font for individual OAF pages?I am aware of CUSTOM.xss but that changes it for the whole application.I want to make the changes for specific pages.
Thanks,

Try using HTML:
Set the text to:
area.setText("<html>My <b>Text</b> Here</html>");
and see if the word Text is in bold. If so, then you can go as far as you want using HTML tags to set bold, color, etc.

Rollover and change colour

Hi
I would like to change colour of a text when the mouse rolls
over, and when the mouse has passed it should go back to normal. Is
this possible? I have found the behaivor "rollover member change"
and used two identical texts with different colours, but cant make
it work. Is this the right way? Thanks for helping! /emma

You could attach a behavior to the sprite on the stage such
as this. It would change the text to red when the mouse is over the
sprite.
property pMem
property pColor
property pColorOver
on beginSprite me
pMem = sprite(me.spriteNum).member
pColor = pMem.color
pColorOver = rgb(255,0,0)
end
on mouseEnter me
pMem.color = pColorOver
end
on mouseLeave me
pMem.color = pColor
end

Text disappear if I change colour or size

Hi..If I write a text in the cc2014 and want to change size or colour it just simply disappear. It looks like a weird bug. I can still make effects in the layer section.
I have tried to reinstall photoshop, but still the same problem.
I have used photoshop for 10 years so I thought I was skilled enough to solve all problems, but I need your help..
Henrik

I have just deleted and reinstalled Photoshop, still the same problem.
What I have:
Adobe product and version number - Photoshop cc 2014 with creative cloud, up to date
Operating system and version number 10.9.4
The full text of any error message(s) Non
What you were doing when the problem occurred      All other programs closed
Computer hardware, such as CPU; GPU; amount of RAM; etc.     2.66 GHz Intel 2 duo / 4GB memory / 1067 MHz / 26 GB free space
Screen shots
     I type "Hello"
I change colour and click "ok"
And the text is gone

Make a pic change colour

Similar Messages

Maybe you are looking for