Make Enter in cell ( in JTable ) go to right cell not lower cell

How do I do that? NO matter what editor I am using, everytime I press Enter, I will go to the lower cell. I want to make it go to right cell. Except the most right cell. If that the case, it will go to the lower cell but in the most left column.
Thank you.

I want to make it go to right cell. Except the most right cell. If that the case, it will go to the lower cell but in the most left column. You are describing the default behaviour of the "tab" key. So basically you want the "enter" key to behave the same way as the "tab" key.
Read this section from the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/misc/keybinding.html]How to Use Key Bindings. It will explain how KeyStrokes are mapped to Actions for a given component.
Then for practical application of the above knowledge, check out this [url http://forum.java.sun.com/thread.jspa?forumID=57&threadID=505866]posting which shows how you can map the Action of one KeyStroke to another KeyStroke for JTable.

Similar Messages

How to enter the values in JTable in runtime

how to enter the values in JTable in runtime

Basically you need a vector of vectors or an array of arrays. Example (off the top of my head):
With Arrays
String[] cols = { "colone", "coltwo", "colthree", "colfour", "colfive" };
String[] numbers = { "one", "two", "three", "four", "five" };
String[] letters = { "A", "B", "C", "D", "E" };
String[][] data = { numbers, letters };
//make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
JScrollPane scroll = new JScrollPane(new JTable(data, cols));
With Vectors
Vector cols = new Vector();
cols.addElement("colone");
cols.addElement("coltwo");
cols.addElement("colthree");
cols.addElement("colfour");
cols.addElement("colfive");
Vector numbers = new Vector();
numbers.addElement("one");
numbers.addElement("two");
numbers.addElement("three");
numbers.addElement("four");
numbers.addElement("five");
Vector letters = new Vector();
numbers.addElement("A");
numbers.addElement("B");
numbers.addElement("C");
numbers.addElement("E");
numbers.addElement("F");
Vector data = new Vector();
data.addElement(numbers);
data.addElement(letters);
//make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
JScrollPane scroll = new JScrollPane(new JTable(data, cols));The array or vector can be easily populated at runtime.
Regards
Riz

Make Enter work as Tab in Flex DataGrid

Hello!
I'm trying to make Enter work the same as Tab in a DataGrid -
commit changes to the edited cell and move focus to the next one to
the right, then next row, etc.
I've tried to use something like:
focusManager.getNextFocusManagerComponent(true).setFocus();
or
focusManager.moveFocus(FocusRequestDirection.FORWARD);
but I cannot seem to make it work in a DataGrid...
Any help would be much appreciated!
Thank you!
Sergey

in keyup event of the grid, try something like:
public static function focusCell(columnIndex:int,
dg:DataGrid) : void {
dg.scrollToIndex(dg.selectedIndex);
var focusedCell:Object = new Object();
focusedCell.rowIndex = dg.selectedIndex;
focusedCell.columnIndex = columnIndex ;
dg.editedItemPosition = focusedCell;
}

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro D

I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedback

PDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
(see ISO 32000 for what PDF "is")
What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
Be well...

How do you make the rows in a JTable uneditable.

Hi
Does anyone knows how to make the rows in a JTable uneditable.
--kirk

Hi,
implement a TableModel, e.g AbstractTableModel and use it to initialise
your table. (JTable aTable = new JTable(myAbstractTableModel))
And if you want your table to be editable implement isCellEditable() in your table model, and let it return true. If not let it return false, or don't implement it att all.

Ok so i'm trying to do a conditional format on numbers if (cell a2) = greater than or text then make the same cell or another cell do something. Does anybody knows how to do that on numbers. thanks.

hi I'm from Italy.
ok so i'm trying to do a conditional format on numbers if "a cell" = greater than or text then make the same cell
or another cell do something like insert a number or change color.
Does anybody knows how to do that on numbers?. thanks.

Among the things you'll learn from the User Guide:
Conditional formatting can be used to change the style of the text in a cell and/or the fill colour of the cell.
A formula may be used to set the value in a cell. In both cases, the format rule or the formula affects only the cell to which the rule is attached or which contains the formula. Neither values or formats may be 'pushed' onto another cell.
Regards,
Barry

JavaFX2.2 TableView:How to make a table cell be edited without mouse click?

Hi,
I've encounter a problem with editable table cells. I'm using the TableView in my project just as the Tutorial on Oracle (http://docs.oracle.com/javafx/2/ui_controls/table-view.htm).
According to it, I use the setCellFactory method to reimplement the table cell as a text field with the help of the TextFieldTableCell class. However, I found the steps is a little complex to get to the point where the cell can be edited:
1.Let the table cell be selected by using direction key.
2.Press “Enter” to converts the cell to a text filed so that it is ready to be edited.
3.Clicking in the text field allows the contents to be edited
The problem is step 3, that you must use the mouse to click before you can input data in this table cell.
So, is there a solution to avoid step 3? That is the text field allows the data inputting when you just press “Enter”(step 2).
By the way, English is not my native language. Hope I have made myself clear.

Hi,
You need to pass the focus to the text field when the startEditing event occurs. In the class that extends TableCell you use for cellFactory:
public void startEdit() {
super.startEdit();
createTextField();
setText(null);
setGraphic(textField);
* put focus on the textfield so user can directly typed on it
Runnable r = new Runnable() {
@Override
public void run() {
getGraphic().requestFocus();
Platform.runLater(r);
}

I have a one-column table in pages. Each cell has text and a number separated by a colon. Can I automatically make it two column with everything to the right of the colon in the second column?

I have a one-column table in pages. Each cell has text and a number separated by a colon. Can I automatically make it two column with everything to the right of the colon in the second column?

Here's another way that is pretty quick to do.
Formula in Column B is:
=LEFT(A, FIND(":", A))
Formula in Column C is:
=RIGHT(A, LEN(A)-FIND(":", A))
You can eliminate the colon from the result in column B by writing:
=LEFT(A, FIND(":", A)-1)
Once you do the conversion, you should freeze the result by Selecting columns B and C and then Command-C, Edit > Paste Values.
Regards,
Jerry

How to make a grid cell uneditable without messing up tabbing

I'm using an AdvancedDataGrid in ActionScript 3/Flex 4. The grid has 5 columns: Caller Intent, Labels, Strategy, Confirmation Mode, and Confirmation Promptlet. All columns are editable except for Labels. However, if you change the Confirmation Mode value to NEVER, the next column Confirmation Promptlet becomes uneditable and is set with the value 'n/a' (this is the desired functionality).
Unfortunately, the image is not very clear at all. I changes the Confirmation Mode value to NEVER in the second row. This is what happens when I start tabbing out of the Confirmation Mode cell:
1st Tab: Confirmation Promptlet populated with 'n/a'. I don't see anything in focus.
2nd Tab: The 5th tab from the left in the view stack (dark grey) is in focus.
3rd Tab: I don't see anything in focus.
4th Tab: The button with the green '+' (top left) is in focus. 5th Tab: The grid itself is in focus.
6th Tab: Finally I get to the Caller Intent cell of the next row (when this image was captured)
I tried setting tabEnabled="false" and tabFocusEnabled="false" for the button. I set only tabFocusEnabled="false" for the AdvancedDataGrid. But then the Tab focus starts moving to the components in the upper right panel and lower right panel.
I need to accomplish 2 things:
1. Have tabbing be contained in the grid, in the upper right panel, and in the lower right panel. Meaning tabbing should not cross from one area to another.
2. Have an uneditable field not mess up the normal tabbing behaviour.
Thank you.
Bonnie

Hi there!
I'm trying to force the columnIndex and rowIndex values of my grid's editedItemPosition object with no success .
Here is my code:
                                protected function adgGrid_itemEditBegin( event:AdvancedDataGridEvent ):void {
                                    if ( clickCount <= 1 || adg_mappedTagsList.selectedItems.length > 1 ) {
                                        event.preventDefault();
                                    } else {
                                        // If user is trying to edit promptlet field but mode has been set to NEVER, make promptlet field non-editable.
                                        if ( event.columnIndex == 4 && adg_mappedTagsList.selectedItem[ "confirmationMode" ] == 2 ) {
                                            adg_mappedTagsList.editedItemPosition.columnIndex = 0;
                                            adg_mappedTagsList.editedItemPosition.rowIndex = adg_mappedTagsList.selectedIndex + 1;
                                            event.preventDefault();
I stepped through the debugger and I do not see the values being changed:
adg_mappedTagsList.editedItemPosition = Object (@a3ae8e1)
    columnIndex = 4
    rowIndex = 2
adg_mappedTagsList.selectedIndex = 2
In this scenario, the values should be 0 for columnIndex and 3 for rowIndex. However, as I stepped over the two assignment statements, I do see the address of the editedItemPosition object being changed.
What am I missing here?
Thanks!
Bonnie

How to make ENTER key in internet explorer run the BIP report?

In BI publisher 11g, users wanted that after entering the values for the parameter, they hit the ENTER key ( on the keyboard) and the report should run .
In Mozilla firefox, when I hit ENTER key on the keyboard report runs fine... but in Internet explorer, it does not ( infact in internet explorer TAB key works)
How to make ENTER key in internet explorer run the report?
Thanks
Ashish

Perform the following steps and tell us if it resolve this issue:
1. In Internet Explorer, click Tools, and then click Internet Options.
2. Click the Security tab.
3. There are four security zones listed:
* Internet
* Local intranet
* Trusted sites
* Restricted sites
Click the zone being used by P6, which is noted at the bottom right hand corner of the browser window when the P6 URL is being accessed.
4. Under Security level for this zone, click Custom Level.
5. Under Downloads, under Automatic prompting for file downloads, click Enable, and then click OK two times.
6. The browser will need to be restarted for the change to take effect.
Refer to the following Microsoft Knowledge base article for additional file download and active x controls which should also be enabled: http://support.microsoft.com/kb/883255

Make enter key work as tab in apex

Hi ,
I have one form it contains 15 fields . to navigate from one field to next field i have to use enter key instead of TAB key.
is there any solution.
Thanks
Sagar

Hello Vikram,
Big Fan of you, you've helped me a lot in my query hope you'll do so this time too
need help here :make enter key work as tab in apex
$(document).ready(function() { $('input').keydown( function(e) { var key = e.charCode ? e.charCode : e.keyCode ? e.keyCode : 0; if(key == 13) { e.preventDefault(); var inputs = $(this).closest('form').find(':input:visible'); inputs.eq( inputs.index(this)+ 1 ).focus(); } }); });
This works fine on tabular forms if there are existing records but as soon as I hit add rows hitting enter does not move the cursor, can you help

I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

Also, if you are sharing an Apple ID, you will get his iMessages.

When i make call from iphone,loudspeaker is being enabled automatically and not able to hear any sound ..So Please need Full Answer?

When i make call from iphone,loudspeaker is being enabled automatically and not able to hear any sound ..

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

I entered first and last name correct.but my ID not founded.what should i do?

i entered my name and email correct.but my ID not founded!why?MY phone is disabled,version is beta ios7.

I wonder if Apple will ever find their own answer to Macros... you know, in a non-virus way...
AppleScript has been around since 1993 (I think) and isn't known for vulnerability to viruses. It works similarly to VBA macros, except that it is not "built into" Numbers the way VBA is built into Excel. You run it from Script Editor or as a menu pick from the Scripts menu or (if placed within Automator) from the Services menu or a keyboard shortcut.
Below is a short script that reads the names in selected cells, splits them into a last name and first-middle, and places them on the system clipboard.
To use:
Copy-paste into Script Editor
Select the cells with the names you need to "split"
Click the run button in Script Editor
Click once in the first destination cell in Numbers.
Command-v to paste.
Just a quick copy-paste. No formulas or messing with text editors!
SG
tell application "Numbers"
tell document 1 to tell active sheet
tell (first table whose selection range's class is range)
set pasteStr to ""
repeat with aCell in selection range's cells
set v to aCell's value
set AppleScript's text item delimiters to " "
set fstMidName to v's words 1 thru -2 as string
set AppleScript's text item delimiters to ""
set lName to v's last word
set pasteStr to pasteStr & fstMidName & tab & lName & return
set the clipboard to pasteStr
end repeat
end tell
end tell
end tell
The result:

Make Enter in cell ( in JTable ) go to right cell not lower cell

Similar Messages

Maybe you are looking for