"Make link" in a textbox is not working
Hyperlinks in text
When editing a text in a textbox one can mark a text that is a link (for example www.google.com), right click it and choose the option "Make Link". Then that specific text will be turned into a fully functional hyperlink with colors and everything, BUT only in the "edit text mode". In the layout in Edge will the hyperlink not work or even be seen as a link. And not in the browser either.
This must be a bug, isn't it?!
I've seen many post about really tacky ways to get hyperlinks in a text by coding and so on. These are typical "english" solutions because you never think about translations. Hideing text inside code is very bad programming when it is time for translation.
The function is there for makeing hyperlinks but it doesn't work. So where do we report bugs??
stageit ab wrote:
Hyperlinks in text
When editing a text in a textbox one can mark a text that is a link (for example www.google.com), right click it and choose the option "Make Link". Then that specific text will be turned into a fully functional hyperlink with colors and everything, BUT only in the "edit text mode". In the layout in Edge will the hyperlink not work or even be seen as a link. And not in the browser either.
This must be a bug, isn't it?!
Are you sure you posted to the right forum?
There is no Make Link option for the text.
Please clarify.
Darrell
Similar Messages
-
Command Link in ADF table is not working/ PPR event not getting fired
Hi All,
I am having ADF Table, in that one column is with command link if click on command link, it is not navigating to corresponding page or method of a bean. If i give same command link out of the table it working fine, this issue i am facing is in IE9.
if i use IE in compatibility mode the links works fine, even in IE8 version also.
Browser: IE 9
Jdev version: 11.1.1.5.0
I tried all possible things, but nothing workout for me.
showPopupBehavior not working in IE9 for af:table buttons (jdev11.1.1.5.0)
Partial page rendering not working in ie9
Command Link in ADF table is not working
ThnksHi,
please file a bug if you have a customer support contract and provide a testcase
Frank -
Link for territory mgmt is not working
Hi All,
We have territory management configured for three custom attributes.
Link for territory management is not working for territory assignment block on account overview screen.
Any hint how we can solve this issue?
Thanks and Regards,
Gauri.How are you resetting the password?
Resetting User Password in Lion, Mountain Lion & Mavericks
Boot into your Recovery Partition by hold down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton -
JSF : Dynamic link generated by commandLink does not work
In the following code, without <f:verbatim>, it is giving "Duplicate ID in the view" Exception. But with <f:verbatim>, the links generated by commandLink does not work. Please help me to solve this problem.
Thank you in advance.
Regards
Abdul
<%-- jsf:pagecode language="java" location="/src/pagecode/eservice/DisplayMoreEServices.java" --%><%-- /jsf:pagecode --%>
<%@ include file="/includes/g_common_include.jsp" %>
<%@page import="java.util.Map"%>
<%@page import="bh.com.cio.egov.EGOVConstants"%>
<%@page import="javax.portlet.PortletSession"%>
<%@page language="java"%>
<%
PortletSession ses = renderRequest.getPortletSession();
Map eServiceCatMap = (Map) ses.getAttribute(EGOVConstants.REQ_ESERVICE_LIST_BY_CAT);
renderRequest.setAttribute(EGOVConstants.REQ_ESERVICE_LIST_BY_CAT,eServiceCatMap);
%>
<%@page import="bh.com.cio.egov.vo.EServiceVO"%>
<f:view>
<script type="text/javascript">
function blinkThis(id, color, timeout)
var idElem = document.getElementById(id);
if(idElem)
idElem.getElementsByTagName('span')[0].style.color = color;
setTimeout('switchColor(\'' + id + '\', \'#8A7C5B\', ' + timeout + ')', timeout);
function switchColor(id, color, timeout)
var idElem = document.getElementById(id);
if(idElem)
idElem.getElementsByTagName('span')[0].style.color = color;
setTimeout('blinkThis(\'' + id + '\', \'#FF3030\', ' + timeout + ')', timeout);
</script>
<f:loadBundle basename="nls.egovresource" var="nls"/>
<hx:scriptCollector id="scriptCollector1">
<h:form id="form2">
<f:verbatim>
<div class="header-top">
<h:outputText value='#{nls["eservice_label_title"]}'></h:outputText>
</div>
<c:forEach items="${requestScope.REQ_ESERVICE_LIST_BY_CAT}" var="categoryVOs" varStatus="catIndex">
<table width="99%" border="0" align="center" cellpadding="0" cellspacing="0">
<tr>
<td> </td>
<td class="gray1" height="30px">
<c:out value="${categoryVOs.value.category.categoryName}" escapeXml="false"></c:out>
</td>
</tr>
<tr>
<td width="2">
<div align="right">
<img src='<%= imageRootDir + "dot.png"%>' width="4" height="1" />
</div>
</td>
<td width="100%" >
<table width="99%" border="0" align="center" cellpadding="0" cellspacing="0">
<c:forEach items="${categoryVOs.value.eservice}" var="service" varStatus="serviceIndex">
<%
EServiceVO serviceObj = (EServiceVO) pageContext.getAttribute("service");
String action = null;
int serviceId= -1;
if(serviceObj!=null)
action = serviceObj.getServiceAction();
serviceId = serviceObj.getServiceId();
if(action!=null && action.startsWith("$"))
%>
<c:set var="jstl_to_jsf_serviceName" value="${service.serviceName}" scope="request"/>
<c:set var="jstl_to_jsf_url_en" value="${service.serviceAction}" scope="request"/>
<c:set var="jstl_to_jsf_url_ar" value="${service.serviceActionAr}" scope="request"/>
<tr>
<td height="17">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="95%" id="extMoreCell_${catIndex.index}_${serviceIndex.index}">
<img src='<%= imageRootDir +"arrow1.png"%>' width="15" height="16" border="0"/>
<h:commandLink styleClass="links menu-txt" action="#{pc_EServiceView.doExternalLinkAction}">
<h:outputText value="#{jstl_to_jsf_serviceName}" styleClass="menu-txt"/>
<f:param name="PARAM_ESERVICE_URL_EN" value="#{jstl_to_jsf_url_en}"></f:param>
<f:param name="PARAM_ESERVICE_URL_AR" value="#{jstl_to_jsf_url_ar}"></f:param>
<f:param name="JSP_ACTION" value="ACT_EXTERNAL_ESERVICE"></f:param>
</h:commandLink>
</td>
</tr>
</table>
<script type="text/javascript">
<c:if test="${service.serviceId eq '53'}">
blinkThis('extMoreCell_7_3', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '54'}">
blinkThis('extMoreCell_7_4', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '55'}">
blinkThis('extMoreCell_7_5', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '56'}">
blinkThis('extMoreCell_0_8', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '57'}">
blinkThis('extMoreCell_8_8', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '59'}">
blinkThis('extMoreCell_1_8', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '58'}">
blinkThis('extMoreCell_5_6', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '28'}">
blinkThis('extMoreCell_1_4', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '20'}">
blinkThis('extMoreCell_5_3', '#FF3030', 1000);
</c:if>
<c:if test="${service.serviceId eq '60'}">
blinkThis('extMoreCell_7_6', '#FF3030', 1000);
</c:if>
</script>
</td>
</tr>
<tr>
<td bgcolor="#FAF9FA" background='<%= imageRootDir + "line-bg-eservices.png"%>'><img src='<%= imageRootDir +"line-bg-eservices.png"%>' width="2" height="1" border="0"/></td>
</tr>
<%}
else if(action!=null)
%>
<c:set var="jstl_to_jsf_serviceName" value="${service.serviceName}" scope="request"/>
<wps:urlGeneration contentNode="${service.serviceAction}" allowRelativeURL="false" keepNavigationalState="true">
<%
//String urlC = "http://"+renderRequest.getServerName()+":"+renderRequest.getServerPort()+wpsURL;
String urlC = "" + wpsURL;
%>
<c:set var="url" value="<%=urlC%>" scope="request"/>
</wps:urlGeneration>
<tr>
<td height="17">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td id="intMoreCell_${catIndex.index}_${serviceIndex.index}">
<img src='<%= imageRootDir +"arrow1.png"%>' width="15" height="16" border="0"/>
<hx:outputLinkEx styleClass="links menu-txt" value="#{url}">
<h:outputText value="#{jstl_to_jsf_serviceName}" styleClass="menu-txt"></h:outputText>
</hx:outputLinkEx>
</td>
</tr>
</table>
</td>
</tr>
<tr>
<td bgcolor="#FAF9FA" background='<%= imageRootDir + "line-bg-eservices.png"%>' ><img src='<%= imageRootDir +"line-bg-eservices.png"%>' width="2" height="1" border="0"/></td>
</tr>
<%
%>
</c:forEach>
</table>
</td>
</tr>
</table>
</c:forEach>
</br>
<h:messages styleClass="messages" id="messages1"></h:messages>
</f:verbatim>
</h:form>
</hx:scriptCollector>
</f:view>1) Throw your code away and use h:dataTable instead of c:forEach to render a table of dynamic size.
or:
2) Hand-assign every UIInput and UICommand element inside the loop an unique ID. E.g. "commandLinkId" + loopIndex -
Link in pdf-file does not work on Ipad
With my site www.bartkuijer.nl I offer visitors the free possibility to see (and download) sheetmusic, from music written by me. These are pdf-files. But they can not only SEE the sheetmusic; the music on that pdf-files can also be PLAYED. That's done bij clicking on a link in that pdf-file to a mp3-file of the music on my site.
This works fine on a pc. When I try this on the Ipad of my wife it DOES NOT WORK!
So my question is: how come? And what to do to make this work also fine on an Ipad.
This is important for me, because I want this sheetmusic to place as Ipad-apps for free.It works!
But not with a pdf-file. The Ipad does not recognize links in a pdf-file.
Te solution is found by making a htm-file with emdedding a quicktime-player and images of the music. This is my first Ipad product. On a pc the player starts immediately; on the Ipad it has to be started.
Now I have to work on a solution to change this to an app -
My podcast that was released today was in fact added to my subscription but my iTunes link is not working anymore. Doe sit think there are two different podcasts? Can they be merged?
It's not really possible to comment unless you would like to publish the URLs of both your feed and the Store page - this latter can be found by control-clicking on the podcast image (or where it should be) - and choosing 'Copy link'. Please include the http:// in both cases to make the links clickable.
-
Links in the webview are not working.
Hello Everybody,
I am showing data in the webview using one custom html page. In this custom html page , I am using css to make the font better and then passing my required data in the respective tabs. In one this tag i.e. description tag, I am passing the description html data in that links are also present. WebVIew is showing the data in page correctly but links present in that page are not working. When I am clicking on those links, they are not getting open in the webview.
I am working on this issue from two days but no solution I found.
Is there anything , I am missing?
Can anyone here, help me out?
PanditHi Satake,
Sorry for the late response.. I was out for some days...
Actually , there was presence of target= {blank}, but I removed it from that html string as per your advice but didn't work.
The html page which I am showing in the webview is custom webview , I mean it's a html template and I am passing description data in one description tag.. and that description data is having that link that is not opening after clicking on it.
On the other hand , if I passed only html data without html template file then it is working fine.
Is there any problem in my html template page which is a custom page? Or I need to add any property in the description tag to enable the links?
Pandit -
Links in dynnamic html text not working?...
Hi all
I have a dynamic text field, set to format html.
The link that loads in the dynamic text field is:
<a
href="portfolio_template.php?sec=housing%2F&sub=townhouses%2F&pro=rheingold+gardens%2F&st =2&id=5">Rheingold
Gardens receives 2006 Building Brooklyn Award</a>
It does not work.
If I make a very simple link, like:
<a href="
http://example.com">link</a>
It works.
I have seen in the Flash (MX2004) doc that
"<a href> must be a string, up to 128 characters."
My href string is not longer than 128 chars...
What is wrong?...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing ListHave tried putting
http:// in front of your link? -
Browser Issue all links in web pages do not work
Having some issue with Browser: all links in web pages for various sites do not work. Browser was working fine for year or so just sopped the other day
Are your links including "www" at the beginning? Is your default browser correct? If you have a backup just use that backup when your browser worked, to put it in its previous state, but first backup what you have so that you can upload your history ie if you still need it
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed -
HT2731 i already make my apple id but it not working why?
sir i make id but not working why?
What happens when you try to use it ? When you create an account you should get a email which you will need to open and click on the 'verify now' link in it.
If it's a different problem ... ? -
Ever since I downloaded the Acrobat Pro 11.0.09, the PDF Maker has not worked, but instead causes MS Word 2013 to crash. I cannot find the cause or the solution.
forumnotifierOK I will try to elaborate this time with pictures so it is clear what I am asking and what the issue I am facing is.
The specific option I want to be able to use from within the Adobe Acrobat Pro user interface is
File\Create\Batch Create Multiple Files
When I select that menu item a floating tool bar thing pops up that I can drag and drop files onto.
If I drag excel or powerpoint documents onto it and press OK it converts them fine. If I drag MS word documents into it the documents appear in the list but when I click OK it says no files processed.
In the process of troubleshooting I also tried using the Add Files button. That is when I discovered that MS word documents (*.doc, *.docx) are not showing up in the list of supported file types.
The same thing happens when I try converting a single file using the File\Create\Create PDF From File menu item. Just like above the MS word documents do not show up in the list of supported file types.
Looking in my registry entries as suggested by the article linked to by one of the posters above I can see both *.doc and *.docx types registered in the correct place.
Unless I can use the batch convert command as intended by the time my trial period runs out in 13 days I cannot justify buying this software. If converting the documents one at a time was acceptable I would just use Save As PDF from within MS Word which works just fine. I need the batch convert function so I can convert my whole library of word documents to PDF at once.
Any further assistance greatly appreciated!
Regards,
Gray -
Linking to a website does not work
I am new to captivate and am having a problem. On one of my slides, I have a link to a website. I placed a click box over the text and set the action to Open URL or file and specified the URL to open in a new window.
When I publish the project, the link works when I am in the published PDF file but it does not work when I am in the published SWF or HTM file. Can someone give me some advice on what I may be doing wrong? IF this has been addresssed elsewhere, I am sorry for the duplication. I have searched and could not find anything.
Thanks in advance.Hi there
"Whitelisting" is a process that is used to identify something as being a "safe" or "trusted" source. I believe what is meant in this context is that you need to add the location to the trusted locations list in the Flash Player as described in the link below:
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Simple question: calling URL link with WEB.SHOW_DOCUMENT is not working
Hi folks,
this should be an easy question, but I have no idea why it's not working :-(.
In one of my form, I would like to place an URL link behing button.
For this purpose I'm using below code:
WEB.SHOW_DOCUMENT('http://www.google.com','_blank');But when above code is executed, nothing happens :-(.
Could it be because I'm using it within modal type of window?
Thanks,
Tomas
I'm using Oracle Forms 10ghave you checked with using self instead of blank to see if it will replace your current page with the one you are tyring to call?
Have you got any other firefox plugins running such as Ad block? can you try disabaling all addons and even the internal pop-up blocker jus to see if this will work?
if self works but blank does not how about having the main app called from a multi frame page. one frame with the app in and the other frame with some javascript that can be called to open a new window? dont know if that will work and its late so probably not thought it thorugh fully :) -
Crystal Report orange link arrow to SAP B1 not working
Hello,
I couldn't find a way to insert the actual "arrow" icon into a Crystal report so I copied one from one of the Crystal Reports imbedded in SAP B1 9.0. I subsequently edited the hyperlink to point to the document number I wanted.
From the Format Editor dialog box, Hyperlink, the hyperlink website address is:
http://$b1$/link?table=OPCH&key=1
There was a formatting button to the right of the website address line. Clicking on it yielded a formula workshop dialog box that I edited as follows:
'http://$b1$/link?table=OPCH&key='+ToText({OPCH.DocNum},0,"","")
The Crystal Report runs fine in B1 and shows the link arrows. Hovering the cursor above the hyperlink in print preview yields the specific information for that record. For example, when the report shows A/P Invoice #4394 the screen shows a small pop-up with "http://$b1$/link?table=OPCH&key=4394". Clicking on the arrow brings up a window with a blank! A/P invoice with the cursor located in the "Vendor Invoice No." box (OPCH.NumAtCard field).
Why is this not working to bring up the correct A/P invoice? There are no errors indicated.
Thanks for any assistance.Thank you, Nagarajan.
Those instructions are exactly what I've done with my report. However, the instructions start with the phrase "manually insert link arrow into Crystal report". OK, I did a Google search on "insert link arrow" and "crystal" and "reports" and "SAP" and there was only ONE webpage with these words on the ENTIRE internet--the page you sent me to. Crystal reports online help has nothing relating to a "link arrow". If there's some special aspect of this link arrow that I'm missing, it sure is a secret because there's nothing out there on this subject. I guess I'll have to copy the graphic from previous reports each time I need to do this.
CORRECT ANSWER:
In any case, I was able to resolve the issue by changing the text in the formatting dialog box from OPCH.DocNum to PCH1.DocEntry and it worked. Why it worked is beyond me. Guessing seems to be the one defining feature of doing work with SAP B1. -
A link to other pdf files not working in only Android OS. How Can I fix it ?
If there is many folders and pdf files in there and a pdf file is at root and the root pdf file has many link to pdf files.
In Windows OS links work well. but In Android OS, not working. when I click links, there is no difference. How can I fix it?Hi,
Are you trying to open a portfolio or a pdf with attachments on Adobe Reader on Android or a pdf file with links(in form of text) to other pdfs? Would it be possible for you to share the pdf with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team
Maybe you are looking for
-
Error while calling the Web service: GetBprElements
Hi Experts, During integration of ARIS Business Architect for SAP Netweaver with SAP Solution Manager I tried to import the BPR using Transfer Repository option of the earlier. It showed me process completed with error or warning mentioned in the sub
-
Adobe 9 Pro Printing slow, Reader 9 works fine
I have a user who is having an odd problem. If she tries printing a PDF from Adobe Reader 9 to a network printer, it works fine. However, if she uses Adobe Acrobat 9, it takes forever, and often times out. Any ideas? Thanks in advance, Brian Fink
-
Using SQL queries via ODBC connection to obtain data for a report
Post Author: adhiann CA Forum: General Hi All, I was trying to run a Crystal Reports report through Clearquest using an SQL query I designed in CQ to give me the data I need, however, from within ClearQuest, I cannot associate an SQL query on a repor
-
Reg Recon Account and local balances in creating account
Hi all can anybody help me...i am getting the following error when i am creating the GL ac for Vendor Recon ac,(only balance in local currency is selected) ...."Balances for reconciliation accounts only in local currency not defined" Message No fh061
-