Make object fit browser window when scaling it up and down?
I want to add a flip book on my page. But i want it to scale up and down, so it will fit both a 13" screen as well as a 27" screen. Is this even possible?
Hi,
Please take a look at this for a similar discussion : https://forums.adobe.com/message/6264647#6264647
Regards,
Aish
Similar Messages
-
Revision: 12007
Revision: 12007
Author: [email protected]
Date: 2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
Log Message:
When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially. This was preventing our preloader from completing, since we were waiting for a non-0 Stage size. Took a slightly different approach to solving the bug for which the original logic was added to work around.
QE notes: None
Doc notes: None
Bugs: SDK-24191
Reviewer: Alex, Evtim
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/non-0
http://bugs.adobe.com/jira/browse/SDK-24191
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.asRevision: 12007
Revision: 12007
Author: [email protected]
Date: 2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
Log Message:
When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially. This was preventing our preloader from completing, since we were waiting for a non-0 Stage size. Took a slightly different approach to solving the bug for which the original logic was added to work around.
QE notes: None
Doc notes: None
Bugs: SDK-24191
Reviewer: Alex, Evtim
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/non-0
http://bugs.adobe.com/jira/browse/SDK-24191
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as -
Close browser window when applet closes (seperateFrame=True)
Hello,
Does anyone know a way to close the parent browser window when the java applet closes when the config setting seperateFrame=True?
ThanksDo a little search in the forum, there are 100s of solutions on how to close the browser window.
-
Close Browser window when you close 10g forms
Help Please.... I am trying to close browser window when I exit 10g forms:
Per oracle Note:115905.1
create close.html file Put the html file in the webserver root.
I created the following file in $ORACLE_HOME/Apache directory (webserver directory??)
1.)Create an html file (es. close.html):
<html>
<body onload="closeit()">
<script>
function closeit()
win = top;
win.opener = top;
win.close ();
</script>
</body>
</html>
In exit form when button pressed I have the code
web.show_document('http://apphost1.univ-wea.com:7777/close.html','_self');
The brwser window does not close automatically.
thanks,
AnithaHello this is saras from chennai.
Now i m developing oracle forms using 6i. now i m running it independantly. that is i put forms in one folder and run these forms using shortcut. If i m using the same in client machine also. But now i want to run these forms in webbrowser(client-server). for this i done the followings.
1. installing forms server and reports server.
2.Also i install IIS Server and appachie server also.
3. I had fmx files.
now i dont know the procedure to configure these web server with forms server. And i hold the fmx files in inetpub\wwroot folder.
Which one is the easy method appachiee server or iis server.
Please help me to run these fmx files in web browser.
I m eagerly waiting for your favourable reply.
saras,
[email protected]
chennai -
opening hotmail in firefox: Please refresh your browser window, When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure . Refreshed but no change. in Safari no problem
Go to '''Options '''on Firefox Browser-->'''Advanced'''-->''Click on'' '''Network '''tab-->''Select '''''Settings'''-->''Select '''''Use System Proxy Settings
''' -
I use Safari as my browser. When on a site and I click on a PDF file I get a black screen and a notice that "Adobe Reader blocked for this website". However, this does not happen if I use Firefox.
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 3 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
when i open safari on my Imac if i also open an additional window, when i then close them down and reopen safari they both paper again.also if i then add additional windows the additional windows keep coming up too
If you are running v10.7 Lion, disable Resume > How To Disable Lion's 'Resume' Feature - MacRumors.com
-
I am running 4.0.1 and when I download something the Download box stays blank-even though I have selected in General Preferences 'Show the downloads window when downloading a file' AND selected 'Save files to Downloads'....???
In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Since I've updated my iPad to iOS 6 it's running a lot slower especially when I scroll up and down and takes ages to load up on the App Store I know they got glitches but are they gonna be sorting this out as well ?
Hi!
I am also having issues with the device since updating to IOs 6. The time between clicking an icon, i.e. a picture, and the load of that picture takes longer enough to notice it. It did not happen before the update.
I am also having problems with some applications, specially the Facebook application. When I click on my picture in the right bar of the app, it promps a window that ask me for share my location, etc.. and get freeze there.
Regarding reseting the device, already done. It did not helped.
Also, SIRI is very nice, but sometimes it stop working and I have to re-start the device in order to being able to use SIRI again. When it happens, it looks like SIRI is sending the information, but does not do anything after.
It is understandable that they require some time to get the new IOs version working properly, but I dont like to be a Beta tester. -
struggling to wake my apple tv wont respond even when holding the menu and down button any ideas ?
Did you try unplugging the unit from power, leaving it for ten minutes, then plugging in again?
If you have & it didn't work, Damian Smith1 posted this possible solution (I like to give credit where credit is due).
Connect your ATV to your computer and try restoring it to factory setting Use the link below to walk you through the process
Apple TV (2nd generation): Restoring your Apple TV
support.apple.com/kb/HT4367 -
When i track up and down, my screen start stops or jitters
hi all,
when i track up and down with my track pad, the screen seems to "jitter", its really startign to annoy me, i have looked at settign and preferences, but ntohign seems to sort it.
can some one help me.What graphics card does your computer use? Look for that brand name and search for drivers.
-
Why is my webpage blinking when I scroll up and down?
My webpages are blinking up and down when I scroll up and down on a site, also any videos I play do the same thing? Any ideas?
Hi xillain,
Thanks for contributing to the Apple Support Communities.
It sounds like you're noticing unusual behavior with your iPhone screen. If the screen seems to shake or jitter when you scroll up and down, I recommend these steps:
Try to restart your device. If you can't restart, reset your device.
If restarting or resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
From:
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
Jeremy -
Scaling to fit browser window?
Hi Everyone; I'm new to Captivate (specifically Captivate 4) , and I have what I know must be a rather dumb question, but I've spent two hours looking for the answer, and I can't find it. I have my project scaled to a custom width of 768 wide by 576 tall. How in the heck do I set the publish settings so that the output HTML knows to scale the darned browser window to exactly fit my output (no empty space around it)? I know I can go in through HTML and probably fix it there, butI'm just not that old school anymore. I expect the darned app to do that for me in the publishing process. Help.
Hi there
Although it isn't exactly recommended, one way to make things always fit the browser window is to simply link to the SWF and not the associated HTML page.
If you open the SWF it will simply scale to whatever dimension is largest to fit the browser. (If it's taller than wide, it will always fill the browser from top to bottom but not left to right. Or if it's wider than tall, the opposite. There isn't a way I'm aware of to coax it to simply fill the entire space.)
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
Can't Flex apps scale to fit browser window?
This has been brought up a couple of times, but seems to be a
mystery: How does one scale all content to fit the browser window,
preserving aspect ratio, and centering the content vertically or
horizontally (depending on whether the window aspect ratio is less
than or greater than the content aspect ratio)?
Since Flash is vector-based, I would have thought this would
be straightforward and encouraged!
Some information in an earlier post, plus experimentation on
my part, has yielded a bizarre and inflexible partial solution -
using StageScaleMode, and sizing the app's base container to
exactly 500x375 pixels, I can get content that scales with
the window size and doesn't have mismatched margins (though I
haven't figured out how to center it yet). In addition, there are
ugly scaling artifacts (look at the drop-shadows as you change the
browser window size).
Again, not being a Flash programmer, I baffled that this
isn't better supported, but I have to admit, most of the Flash apps
I've seen in the wild seem to all be fixed at some ridiculous size
like 640x480 or something. Are there some serious bugs here, or am
I missing something? Is there a better approach?
Here's a simple, complete, example (based on an example from
an earlier thread, but simplified a good bit):
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx='
http://www.adobe.com/2006/mxml'
pageTitle="Resize Test"
layout="absolute" autoLayout="false"
addedToStage="event.currentTarget.stage.scaleMode =
StageScaleMode.SHOW_ALL"
>
<mx:Style>
VBox {
cornerRadius: 4;
borderStyle: solid; border-color: #000000; borderSize: 1;
horizontalAlign: center; verticalAlign: middle;
dropShadowEnabled: true;
</mx:Style>
<mx:VBox width="500" height="375"
backgroundColor="#808080"
paddingTop="20" paddingBottom="20" paddingLeft="20"
paddingRight="20">
<mx:VBox width="100%" height="100%"
backgroundColor="#808000">
<mx:Label text="This is some text" fontSize="12"
width="128" textAlign="center"/>
<mx:Button label="Button"/>
</mx:VBox>
</mx:VBox>
</mx:Application>quote:
Originally posted by:
jpwrunyan
Not bitmaps. Externally loaded images that get converted to
bitmaps. What I said is that 90%+ are online catalogues. Logically
it would be safe to assume they display external images of a set
size. Sorry that was unclear. It would interesting to see an
official survey.
Yeah, I was using "bitmap" to mean raster graphics, whether
the actual source be jpg, png or what have you.
quote:
Originally posted by:
jpwrunyan
And good luck getting anyone from Adobe to pay attention to
this forum let alone comment. Better to contact their support if
you're ever really stuck.
Another reason I'm thinking MS is going to win this war - my
colleague is having great luck in the WPF forums.
quote:
Originally posted by:
jpwrunyan
Another reason I thought of why resizing does not result in
rescaling by default:
HTML and JSP applications don't rescale when you change the
browser size. Just go to hotmail or msn and check. They reposition.
Flex applications are intended to behave the same way but with RIA
capabilities. That is probably the more likely explanation than
bitmaps merely not scaling well. Anyway, this behaviour was a
thought-out decision and I happen to agree with it. By the way,
older Flash applications
do rescale to fit the window by default.
Exactly! That's the big problem, in my view, with the
HTML/JPG based web, and is what a vector-based solution
(discounting raster graphics) should solve.
Firefox, and now IE7, have features to allow you to scale web
pages to overcome, in a stop-gap way, this problem. IE even scales
images and Flash apps, though some Flash suffers problems when
scaled. Firefox does not (yet?) scale images or Flash along with
the other content. Flash-based Elmo games at sesamestree.org, at
640x480, look pretty stupid on my 42" 1920x1080 LCD (played by my
3-year old, not me!), but at least I can now (try) to scale them up
with IE7 for him.
I do not believe this was a thought-out decision, it's just
inertia from the bad old ways of doing things. There should be a
working option to easily scale content to the browser window, and
if Flex doesn't provide one, Microsoft certainly is going to (with
WPF/E) as they have with WPF. I'm not a big MS fan, but I think
they get the way things are going with the proliferation in the
range of screen resolutions and sizes that web content is being
displayed on.
That said, I realize there is more to dealing with different
screen sizes than just scaling - you may have to change the amount
of content on the screen, dependent on what the subject is.
quote:
Originally posted by:
jpwrunyan
Now if you want the Flash Player to be able to import huge
.jpg files with 1000px+ resolution and selectively only load enough
information to make a smaller size bitmap image so you can rescale
with impunity, more power to you. Sounds great. I would love this.
But it still doesn't address what should happen when the image goes
beyond the original size. I know you're only using vector graphics
so it's not an issue for you.
Yep, raster graphics are troublesome. Worst case, a beautiful
picture frame grows to surround the image as one zooms beyond its
original size (insert smiley icon of choice here)
quote:
Originally posted by:
jpwrunyan
Finally to get back on the main topic:
if SWFLoader isn't working well, you could programatically do
the same thing. Have a sub-contaier inside the application
container which adjusts its scale accordingly to the size of the
parent application container. I have done this myself with the
Image class for zooming in and out from images (ironically 1000px+
images which were displayed at much smaller sizes).
<Application resize="adjustSize()"
creationComplete="adjustSize()" paddingLeft="0" paddingRight="0"
paddingTop="0" paddingBottom="0">
<Script>
private function adjustSize():void {
var newScaleX = this.width/content.width
var newScaleY = this.height/content.height
content.scaleX = newScaleX;
content.scaleY = newScaleY;
</Script>
<Box id="content" borderStyle="none" width=400 height=300
/> <!-- the width and height are arbitrary -->
</Application>
Something along the lines of the above should definitely
work. I am just basing it off my own previous code. You may have to
be careful of borders and padding if you decide to add them.
Whether it works better than the other suggestions you'll have to
decide.
Thanks for the code, and I'll try it. I'm new to Flex, and so
I'm still struggling with some things (such as when objects are
available for manipulation). -
Generated RH output wraps to fit browser window
Hello All,
Is there a way in which generated RoboHelp output, after it
is applied to a piece of software, can be altered or
“fixed” so that it does not wrap text?
For example, in my particular case, when a user selects the
Help icon from the company software, the help appears in a separate
browser window. Depending on the default size of an individual
user's browser window, the content of the help will be
“wrapped” accordingly.
However, if a user has a smaller default browser window , the
text is “smushed” to fit the window, but the graphicn
will go off the screen. A similar result occurs if the window
larger or is maximized. The text will just go on and on and on and
tear apart the formatting.
So my question is this: is there a way to make the help
window open to a default size, specifically one that is capable of
maintaining the formatting so the user does not have to resize his
or her browser window in order to see the help content clearly?
Also, does anyone know if RH is just an inherently bad fit
with browsers other than IE? For users on non-windows based
computers, all RH output looks atrocious. All formatting is pushed
to the left margine, all styles are suddenly null and void. I
assume there is no way around this issue, but if anyone has any
ideas, they would be much appreciated!
Thanks in advance,
Diane
P.S. I wanted to attach pictures to this post to illustrate
what I am talking about, but I saw no obvious way to do so.
Hopefully my text is clear enough.Hi All,
I apologize for unearthing this old topic, but now seamless
RH Firefox output has become a priority for the company.
Elisa (or anyone that may know); you mentioned a workaround
between the .css I created and the RH generated ns.css:
“Workaround - take a copy of projectX_ns.css. Compare
it with projectX.css, paying special attention to indent settings.
Fix any left indents that don't look right. Copy the adjusted
projectX_ns.css into your output folder. Take a look under some
different browser combinations.”
I am hardly savvy when it comes to the “behind the
scenes” workings of RH and the coding. I have found and
accessed the .css files in question, but what exactly, am I looking
for on terms of “indent settings?” I see
“margin” mentioned multiple times, but beyond that I
have no clue what I should be looking for.
My goal is to see if I can determine the cause, and thusly
remedy the issue, behind my RH WebHelp output left-justifying all
my bullets and numbering. I am using the latest version of RH with
applicable updates, and I am testing the Firfox output with the
latest versions and updates as well.
Also, I noticed while researching this problem, that some of
the topics within my project that share the same .css file as all
the others, do not manifest the left-justify issue in Firefox
output. I am still in the process of deciphering this mystery.
Any input would be much appreciated!
Thanks,
Diane
Maybe you are looking for
-
Action to open and save multiple files in a different format
Photoshop CS5 TCS 3 I haven't used actions before. I want and to open all files in a folder of one format and save them to a different format. How is this done? Thanks Rob
-
HTML file Error while Processing in Application server AL11
Hi Experts, I have SAP workload data in HTML file and IF i download it using GUI_DOWNLOAD, I am successfully able to access the file. But Further: 1) I am uploading the above mentioned downloaded file in binary mode. 2) Converting binary to xstring 3
-
CVI2013 problem with excluded lines
I found a problem with CVI 2013 when you have some excluded lines in a header file which has some errors. This problem can be seen in the attached example, following these steps: exclude the line #35 (CTRL+E shortcut) build the project; this gives er
-
When Oracle 9i release 2 for Linux available on the marker?
Hi all, sorry for my borther, but I really wanna know the exact date that Oracle 9i release 2 for Linux releases? Thanks xiao
-
Data associated with Activity Type field in Costing transaction KP26.......
Hi, In what table can I find relation between the<b> Plan Activity</b> and <b>Distribution Key</b> data assciated with a <b>Activity Type</b> field in Costing transaction KP26. Please help. Regards, Rajesh.