Making a button appear on a track
I've searched here and in the manual but I'm not sure I'm searching for the right thing. How can I make a button appear within a stream so the user can link back to a menu?
puzzled.....
Thanks
It's done in DVDSP by using 'buttons over video'. Basically, you use the subtitle stream to add the text that you want for the button (or graphic, if you import one as a subtitle).
Once you have set the markers for the start and end point of where the button will appear, click in between them in a spare subtitle stream, type the word you want and then click on the editor window to see it appear. From here on in you can use the window as you would when making buttons on a menu - drag out a button rectangle, set the target and so on.
Make sure that you force the sub to view...
On playback, the button will appear as a part of the subtitle. You need only press the 'enter' key on your remote control to activate it, unless you have created more than one button... in which case you need to use the arrow keys to get to where you want to be before you activate the button.
Similar Messages
-
Hi, I'm finding in DVD Studio Pro that as soon as I've gone past my self designed warning screen on my DVD Studio project, the menu background with buttons simply appears straight away. I would like the buttons to appear or fade in a bit more smoothly a few seconds after the background has appeared to look a bit more professional. Anyone know a way to do this?
Well... Eric has covered it...
What I do is create the menu backgrounds in FCP and make sure I fade in all of the button text and imagery at the right point, then I make a still and hold it for a minute or so. This footage becomes the background for the menu.
I take a still from the 'still' section of the menu footage into photoshop. I add a layer, and add highlight information and export that as an overlay for the menu.
In DVDSP, import both and set the footage for the background... then use the loop point setting and move the marker to the position just after the menu fades in and becomes still. Add the highlight file, draw the button rectangles and set the colours and navigation just as you would for a normal menu.
Now, when this menu plays the animated sequence will fade in and the buttons will become active at the loop point. After the minute of still menu the whole thing will loop, but will start at the loop point (clue's in the name!)
This should give you the effect you are after... -
Making a button appear dim after use
Hi,
I'm trying to work on a jeopardy game, and I pretty much suck
on coding. Anyhow, I was able to disable the button so that when
you go back to the board, the button no longer works, but I'd also
like to dim that button. Is there a way to do this? Or is there a
better solution out there?
Thanks!Nope, almost, but not quite. I get the dimming effect, but
only when I press on the button. My goal is to have that button
dimmed when I return to that frame.
This is what I'd like to have happen: I have the buttons on
my game board, when I click on a button I go to a specific frame
that houses the question, and on that frame I have a back button to
go back to the game board, and at that point, when you're back to
the game board, I want the button already pressed dim so that the
user knows not to click on it again.
Thanks for your help! -
Making Buttons appear depending on the results of a SQL Query
I need some help here I am still working on a time clock program
I need help with the clock in and out buttons i need to know how to make
the clock in button appear only if they are not clocked in. But I can not seem
to make the sql statement or maybe my code is wrong, it needs to just get a
count to see if they have any entries that have 0 in the hoursworked column
and if so then it needs to just display the clock out if not then just the clockin button needs to be displayed this was my orignal code that was not working
<%
String statement = "select count(*) as cnt from TimeSheet Where idnum = " + session.getAttribute("IDNUM");
stmt.execute(statement);
rs = stmt.getResultSet();
rs.next();
int num = rs.getInt("cnt");
if (num == 0 || num == null)
{%>
<tr>
<td><input type="submit" value="Clock In" name="button"></td>
</tr>
<%}
else
{%>
<tr>
<td><input type="submit" value="Clock Out" name="button"></td>
</tr>
<% } %>but it did not work it would only display the clock out button so i need to figure this out so that the user can not clock into the program twice to get double hours and so forth.Does it even compile ?Yes, it wouldnt, not even in 1.5
it needs to just get a
count to see if they have any entries that have 0 in the hoursworked column
and if so then it needs to just display the clock out if not then just the clockin button needs to be displayed in which case,
1. your sql is not correct.
2. session.getAttribute("attrName") returns an Object - is the IDNUM column of type number
(going by the fact that you have not enclosed the value in single quotes '')
Assuming that you have a column called 'hoursworked' in table 'timesheet' and
IDNUM is of type NUMBER
<%
Integer idNum = (Integer)session.getAttribute("IDNUM");
//from the OP :: get a count to see if they have any entries that have 0 in the hoursworked column
String statement = "select count(*) as CNT from TIMESHEET where IDNUM = " + idNum + " and HOURSWORKED = 0 ";
//remaining stuff :: Look out for the error pointed out by Pgeuens
cheers,
ram. -
Using Advanced Actions to Make a button appear only after three other click boxes have been clicked.
I'm working on an interactive brief, and I'm making slides where the user has to click the correct items and then a "Contine" or "Next" button appears so they can move to the next slide. Any help out there? I have been using Captivete but I do not have a lot of experience withthe Advanced Actions. I'm sure this is a pretty simple solution for all you captivate Wizards out there.
I'm using Captivate 5.5.
Thanks for any help!
heymattmannHi Matt,
Can you post some pictures of the Advanced Actions you're trying to use that aren't working? It might give people some ideas of specific ways to help you. It can be a bit frustrating to start out, since there's not a lot out there in Adobe's official stuff for Adobe Actions, but Lilybiri's blog really is a great resource.
Others might do this differently, but for your scenario, I would create 3 similar Advanced Actions, each one assigned to execute On Success for a clickbox, and three Variables to keep track of whether or not the user has clicked a particular box. There's also your next button, which starts out hidden. Make sure to name it something like NextButton so you can find it easily in the dropdown box when making your Advanced Actions.
So I might name the actions and variables: actionClickBox1, actionClickBox2, actionClickBox3, and varClickBox1, varClickBox2, varClickBox3 (when you create the variables, set their default values to 0). You can call them whatever you want, just don't reuse names anywhere else-- you will run into problems.
The idea behind the actions is that each time the user clicks a box, you change the variable for that box to keep track of the fact that it has been clicked. That part you were on the right track for. The next part of the action then checks to see if all the clickboxes have been clicked (aka, if all the variables have been changed from their original values to the new one). If they are, it shows a next button. If not, it does nothing.
From what you said, I think you were trying to add an Advanced Action to show the next button to the next button itself. This would only execute when the user clicks that button, which makes it impossible-- you'd have to click the next button in order to show the button so that you can click it... oh dear. The decision of whether or not to show the next button needs to be part of the clickbox actions, so that upon clicking the third and final box, the next button will pop up. Because it makes this decision (to show or not to show) on each clickbox, the order you click them in doesn't matter. It will only show the next button once all the variables have been changed.
You will see that the actions are all very similar, except for the variable that they change:
actionClickBox1
first tab in the conditional action:
if varClickBox1 is equal to 0 <-- default value of variables must be 0
then assign varClickBox1 with 1
second tab in the conditional action:
if varClickBox1 is equal to 1 AND
if varClickBox2 is equal to 1 AND
if varClickBox3 is equal to 1
then show NextButton
actionClickBox2
first tab in the conditional action:
if varClickBox2 is equal to 0
then assign varClickBox2 with 1
second tab in the conditional action:
if varClickBox1 is equal to 1 AND
if varClickBox2 is equal to 1 AND
if varClickBox3 is equal to 1
then show NextButton
actionClickBox3
first tab in the conditional action:
if varClickBox3 is equal to 0
then assign varClickBox3 with 1
second tab in the conditional action:
if varClickBox1 is equal to 1 AND
if varClickBox2 is equal to 1 AND
if varClickBox3 is equal to 1
then show NextButton
Hint: If you set up one of these actions and save it, you can click a button in the top right hand corner to duplicate it and then just change the few things that are different to make the next action. It saves you from having to create it three times from scratch!
Wow, this is long... I hope it isn't overwhelming in its length, and that it helps! Advanced Actions really are a cool feature once you get past their quirks... -
Why is it that whenever I download a song from itunes that a small grey button appears next to the song (apparently this is the download progress) but whenever I hit it to resume, the song disappears. I am getting annoyed with having to copy the songs manually onto my phone. Thanks for anyones help. Cheers
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
URGENT! Button on a video track
Hi, I have a client who is interested in my idea of having a button on the video track with which, when it appears, you press enter and it plays a different video track. It acts just like a menu button but appears at a certain point whilst playing a video.
I did this during my degree with great ease in DVD Studio Pro using the subtitle tracks but the company I now work for used Encore CS2 and I can't find anything anywhere which will allow me to do what, really is quite a simple request for an 'industry standard' DVD authoring programme.
Please help as this is urgent! Are we going to have to purchase DVD studio pro as well!?
Thank you,
TraceyYou could just set up a menu, with a video background (your video) and then have the loop point setup so that when your button should appear, it does (since this is technically a menu now, should be no problem).
When you get to the point you want the button to go off screen again (if that is the case), just create a new menu or timeline as the out point of the menu (make sure menu is not set for looping) and link to that one.
Crazy crazy workaround, I know...but maybe it'll work for you and you won't need to go buy another program. This is, unfortunately, a weak section for Encore. -
I want to delete some songs from iTunes but no delete button appears when i right click or when i try to delete it from edit. what can i do?
If the songs are downloaded into your iTunes library (i.e. they don't have the cloud icon against them) then you should be able to delete them by selecting them and pressing the delete button on your keyboard.
If they do have the cloud icon then they are in the cloud - you can turn off the showing of all icloud music via the 'Show iTunes in the Cloud Purchases' on the Store tab in iTunes > Preferences (command-comma), or you can hide individual tracks and/or albums so that they don't show in the cloud : iTunes Store: Hiding and unhiding purchases. -
Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?
Are your tracks pat of a collection? Different artists, but still one album? Then mark them a s acollection or set the album artist. See this guide on how to group separate tracks into albums:
iTunes: Grouping Tracks Into Albums -
I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
Acrobat did an update the ability to connect to files in the Workspace has been removed.
Is there any way to reconnect the file back to the Tracker?
Has anyone else had the same problem?
Adobe don't seem interested in helping as this question has been posted for three days and yet no response.First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
enjoy free web..... :)
regards,
Gautam sharma. -
Revision: 14521
Revision: 14521
Author: [email protected]
Date: 2010-03-02 12:47:27 -0800 (Tue, 02 Mar 2010)
Log Message:
ChromeLibrary: moving live and recording buttons to the left hand side of the control bar, and making the button backdrops a little bigger.
Modified Paths:
osmf/trunk/libs/ChromeLibrary/assets/control bar.ai
osmf/trunk/libs/ChromeLibrary/assets/images/eject_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenEnter_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenLeave_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/pause_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/play_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_up.png
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.asRevision: 14521
Revision: 14521
Author: [email protected]
Date: 2010-03-02 12:47:27 -0800 (Tue, 02 Mar 2010)
Log Message:
ChromeLibrary: moving live and recording buttons to the left hand side of the control bar, and making the button backdrops a little bigger.
Modified Paths:
osmf/trunk/libs/ChromeLibrary/assets/control bar.ai
osmf/trunk/libs/ChromeLibrary/assets/images/eject_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenEnter_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenLeave_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/pause_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/play_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_up.png
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as -
ITunes won't play song, even though pause button appears
Recently my iTunes has stopped playing songs. If I click the play button, the pause button appears but the progress bar does not move and no sound is made. The volume on my computer is fine as I can still watch videos on youtube and such. I've recently updated to the lastest iTunes and am not sure whether the songs played find after that or not. I read that it could be a probably with quicktime but I've deleted that and downloaded it again but that did not help.
Please help me!I noticed today I am having the same problem. Song would not play in Ver. 9.1.0 and 9.1.1. Same song plays fine in another media player. Also seeing the same that al0022 is seeing, my play button changes to a pause button, and my progress bar does not move. I am able to navigate around iTunes until I try to play a song then I have to kill the task.
I had a Windows update performed yesterday, and believe the windows update is the cause of the problem.
Anyone else unable to play after Windows updates were performed?
Collin -
How to change gtk theme dialog box button appearance when using tab?
Hi,
I'm using candido as my gtk theme and have noticed that when a dialog box pops up (Yes / No), it is extremely difficult to tell which option is highlighted. How do I change this appearance? I searched through the gtkrc and even used gimp to manipulate the images used via trial and error to see if I found one that worked. Can someone familiar with gtk themes tell me which gtkrc or image to alter to affect this appearance?
I use tab to select my option a ton and hate not being able to tell what I'm looking at.
For reference,
- here is the current look (can you tell which one is highlighted? It's "Cancel" -- just slightly bigger or a fine line around it) LINK
- here is the gtkrc if that helps? LINK
For one more point of clarification, I'm not talking about the button appearance on mouseover. I have identified that the button-prelight.png file changes that. I specifically am talking purely about a dialog popping up and then using the tab key alone to highlight through the options. I really like this theme, but this one thing drives me crazy. This appearance changes when I select different themes with lxappearance, so I've narrowed it down to being a gtk-theme issue, not my openbox theme or icon set.
Many thanks!
Last edited by jwhendy (2011-02-02 18:11:10)HI,
Debug the program after you press the CANCEL button , you will get where the conrol is flowing , And instead of using
Leave to screen '910' use Leave to screen 0.
Regards,
Madhukar Shetty -
I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report: 8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE 1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker. -
I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?
media in the itunes lib but not connected when the sync take part will fail in this manner
media in a not supported format on ios will fail to sync
http://www.apple.com/iphone-5s/specs/
Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
User-configurable maximum volume limit
Maybe you are looking for
-
Hi, I am new to SAP. I would like to learn SAP R/3 system and practice that from my home. So what type sap gui should I download in my PC and where can I get that downloads? I need the sap gui with help options too. Can I download only IDES? What is
-
Remote File Sharing via SSH-How to Set This Up the Easy Way
So, I have been trying to gain access to my office iMac from my MacbookPro at home via the "interwebs" but keep getting the same issue...can not connect. I have read umpteen forums and threads. All give similar advice or are too technical to follow.
-
Lightroom cannot read files, yet they can be imported by copying them.
-
How to maintain the source List if record already exist to maintain ME01
Hi Folks, I've a BDC pgm for t-code ME01(Maitain Source list). which is for creating new contract before expirting one. Here I am upload a TXT file which contains data like vendor, Plant, date(valid to-valid from), PurOrgn, Agreement ... But program
-
Please help me here. I am working on one application that uses some new classes of JDK 1.4. I downloaded Jdeveoper version 9.0.3 and I installed it in my computer. Under the installation document I read that it is possible to use jdk 1.4 instead of 1