Making a query performant

Hi all,
Iam reading data from 2 tables cdhdr,cdpos.
The selection screen contains following inputs from the user
Date,Header BOM material,bom usage(mast-stlan, For Example 8).
select cdhdr~username cdhdr~udate cdpos~changeid cdpos~valuenew
         cdpos~valueold cdpos~tabname cdpos~feldname into CORRESPONDING FIELDS OF TABLE gt_ditab
         from cdhdr inner join cdpos
     on cdhdr~OBJECTCLAS = cdpos~OBJECTCLAS
        and cdhdr~changenr = cdpos~changenr
where cdhdr~objectclas =
'stue' and cdhdr~udate in so_date
Is there any more condition I could put in,in the above query so that the query is performant.
Thanks
K

Hi,
The additional criteria that can be entered is context dependent & would vary in different cases.
As Krishendu indicated, you can make use of TCODE to specify additional criteria.
However, since you are dealing with change document data, I would recommend you to use the function modules present in the F.group SCD1 & SCD0.
This link should be helpful to you in this regard: [Read and Format Change Documents|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa01dd493111d182b70000e829fbfe/content.htm]
Regards,
Saurabh

Similar Messages

Query performance vs MySQL

I have a table with about 500 million records in it stored within both Oracle and MySQL (MyISAM). I have a column (say phone_number) with a standard b-tree index on it in both places. Without data or indexes cached (not enough memory to fully cache the index), I run about 10,000 queries using randomly generated phone numbers as criteria in 10 concurrent threads. It seems that the average time to retrieve a record in MySQL is about 200 milliseconds whereas in Oracle it is about 400 milliseconds. I'm just wondering if MyISAM/MySQL is inherently faster for a basic index search than Oracle is, or should I be able to tune Oracle to get comparable performance.
Of course the hardware configurations and storage configurations are the same. It's not the absolute time I'm concerned about here but the relative time. Twice as long to perform basically the same query seems concerning. I enabled tracing and it seems like some of the problem may be the recursive calls Oracle is making. Is there some way to optimize this a bit further?
Realize, I just want to look at query performance right now...ignoring all of the issues (locking, transactional integrity, etc.)
Thanks,
Greg

In Oracle, a standard table is heap-organized. A b-tree index then contains index keys and ROWIDs, so if you need to read a particular row in the table, you first do a few I/O's on the index to get the ROWIDs and then look up the ROWIDs in the table. For any given key, ROWIDs are likely to be scattered throughout the table, so this latter step generally involves multiple scattered I/O's.
You can create an index-organized table or a hash cluster in Oracle in order to minimize the cost of this particular sort of lookup by clustering data with the same key physically near each other and, in the case of IOTs, potentially eliminating the need to store the index and table separately. Of course, there are costs to doing this in that inserts are now more expensive and secondary indexes are likely to be less useful. That probably gets you closer to what MySQL is doing if, as ajallen indicates, a MySQL table is generally stored more like an IOT than a heap-organized table.
If you get really creative, you could even partition this single table to potentially improve performance further.
Of course, if you're only storing one table, I'm not sure that you could really justify the cost of an Oracle license. This may well be the case where MySQL is more than sufficient for what this particular customer needs (knowing, nothing, of course, about the other requirements for the system).
Justin

Query Performance Related Issue

Hi all,
We have a problem when we are executing the Query in BI 7.0. that is
When we are executing the query first time it will take 2 minutes time .
when we are executing the same query second time ( With out logoff the query designer ) it will take 5seconds.
please give me some inputs how it is taking more time at the first time ?
How to reduce the query execution time for the first time?
Already we have tried all the Query performance options.
Thanks & regards,
Kiran Manyam.

Hi Kiran,
As the others pointed, when you have executed the query for the 2nd time, it might have read from the cache.
Do the following to investigate the performance issue:
1) Go to RSRT and run your query in "Execute in debug mode"
2) Select "Display Statistics Data", check "Do not use cache"
3) After running the query, press the back button. The system will show a the statistics summary.
4) Analyze what activity has the highest run time.
5) If Data Manager time is >= than 30% of the query time and the if the ratio of number of records selected VS the number of records transfered is > 10% then, build an aggregate to help the query run time. This sacrifices data load time but will improve query execution time.
To know what aggregate will help, run the query in debug mode again and choose the option "Display aggregates found". If the query did not hit an aggregate, the names of the cubes will appear. Use the data in the suggestions column (maked with S: ) as a basis for your aggregate.
Hope this helps.

Query performs well in dev but hanging on prod

Hi DBAs,
Urgent help is required on this issue.
One of my sql query performed well in dev server, but now for 1 week it is hanging in prod server so,
* How can i proceed to troubleshoot the problem.
* What are areas i need to look for , and for what ?
Regards
Asif

There could be plenty of reasons to lead this behaviour to occur, sicnce you diden't come up with valid inputs, one really can not offer a pin point advise.
in that case, I would simply recommened you to post the output of explain
plan after making sure your stats are up to date.
hare krishna
Alok

Query performance.

Hi
I have created a procedure that accepts two bind variables from a report. The user will select one or the other, both or neither of the variables. To return the appropriate results i have created a view with the entire result set and in the procedure are a number of if statements that determine what to place in the where clause selecting from the view, depending on what variables populated.
My concern is that the query that generates the view includes several joins and in total outputs around 150,000 records and seems to be rather slow to run.
Would you recommend another solution such as placing the query in the procedure itself repeated for every if statement?
Or should I work on the query performance?
What would be the most efficient solution for my problem?
Any advice would be greatly appreciated.
Thanks

[url http://forums.oracle.com/forums/thread.jspa?threadID=501834&tstart=0]When your query takes too long

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

Report burst:To increase query performance in xcelsius

Is there anyway to increase query performance in xcelsius by using report bursting

Fremlin,
Report bursting is only for distributing your reports to your end users.
You can improve performance only by following the [Best practices|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a084a11c-6564-2b10-79ac-cc1eb3f017ac] in xcelsius.
-Anil

QUERY PERFORMANCE AND DATA LOADING PERFORMANCE ISSUES

WHAT ARE QUERY PERFORMANCE ISSUES WE NEED TO TAKE CARE PLEASE EXPLAIN AND LET ME KNOW T CODES...PLZ URGENT
WHAT ARE DATALOADING PERFORMANCE ISSUES WE NEED TO TAKE CARE PLEASE EXPLAIN AND LET ME KNOW T CODES PLZ URGENT
WILL REWARD FULL POINT S
REGARDS
GURU

BW Back end
Some Tips -
1)Identify long-running extraction processes on the source system. Extraction processes are performed by several extraction jobs running on the source system. The run-time of these jobs affects the performance. Use transaction code SM37 Background Processing Job Management to analyze the run-times of these jobs. If the run-time of data collection jobs lasts for several hours, schedule these jobs to run more frequently. This way, less data is written into update tables for each run and extraction performance increases.
2)Identify high run-times for ABAP code, especially for user exits. The quality of any custom ABAP programs used in data extraction affects the extraction performance. Use transaction code SE30 ABAP/4 Run-time Analysis and then run the analysis for the transaction code RSA3 Extractor Checker. The system then records the activities of the extraction program so you can review them to identify time-consuming activities. Eliminate those long-running activities or substitute them with alternative program logic.
3)Identify expensive SQL statements. If database run-time is high for extraction jobs, use transaction code ST05 Performance Trace. On this screen, select ALEREMOTE user and then select SQL trace to record the SQL statements. Identify the time-consuming sections from the results. If the data-selection times are high on a particular SQL statement, index the DataSource tables to increase the performance of selection (see no. 6 below). While using ST05, make sure that no other extraction job is running with ALEREMOTE user.
4)Balance loads by distributing processes onto different servers if possible. If your site uses more than one BW application server, distribute the extraction processes to different servers using transaction code SM59 Maintain RFC Destination. Load balancing is possible only if the extraction program allows the option
5)Set optimum parameters for data-packet size. Packet size affects the number of data requests to the database. Set the data-packet size to optimum values for an efficient data-extraction mechanism. To find the optimum value, start with a packet size in the range of 50,000 to 100,000 and gradually increase it. At some point, you will reach the threshold at which increasing packet size further does not provide any performance increase. To set the packet size, use transaction code SBIW BW IMG Menu on the source system. To set the data load parameters for flat-file uploads, use transaction code RSCUSTV6 in BW.
6)Build indexes on DataSource tables based on selection criteria. Indexing DataSource tables improves the extraction performance, because it reduces the read times of those tables.
7)Execute collection jobs in parallel. Like the Business Content extractors, generic extractors have a number of collection jobs to retrieve relevant data from DataSource tables. Scheduling these collection jobs to run in parallel reduces the total extraction time, and they can be scheduled via transaction code SM37 in the source system.
8). Break up your data selections for InfoPackages and schedule the portions to run in parallel. This parallel upload mechanism sends different portions of the data to BW at the same time, and as a result the total upload time is reduced. You can schedule InfoPackages in the Administrator Workbench.
You can upload data from a data target (InfoCube and ODS) to another data target within the BW system. While uploading, you can schedule more than one InfoPackage with different selection options in each one. For example, fiscal year or fiscal year period can be used as selection options. Avoid using parallel uploads for high volumes of data if hardware resources are constrained. Each InfoPacket uses one background process (if scheduled to run in the background) or dialog process (if scheduled to run online) of the application server, and too many processes could overwhelm a slow server.
9). Building secondary indexes on the tables for the selection fields optimizes these tables for reading, reducing extraction time. If your selection fields are not key fields on the table, primary indexes are not much of a help when accessing data. In this case it is better to create secondary indexes with selection fields on the associated table using ABAP Dictionary to improve better selection performance.
10)Analyze upload times to the PSA and identify long-running uploads. When you extract the data using PSA method, data is written into PSA tables in the BW system. If your data is on the order of tens of millions, consider partitioning these PSA tables for better performance, but pay attention to the partition sizes. Partitioning PSA tables improves data-load performance because it's faster to insert data into smaller database tables. Partitioning also provides increased performance for maintenance of PSA tables for example, you can delete a portion of data faster. You can set the size of each partition in the PSA parameters screen, in transaction code SPRO or RSCUSTV6, so that BW creates a new partition automatically when a threshold value is reached.
11)Debug any routines in the transfer and update rules and eliminate single selects from the routines. Using single selects in custom ABAP routines for selecting data from database tables reduces performance considerably. It is better to use buffers and array operations. When you use buffers or array operations, the system reads data from the database tables and stores it in the memory for manipulation, improving performance. If you do not use buffers or array operations, the whole reading process is performed on the database with many table accesses, and performance deteriorates. Also, extensive use of library transformations in the ABAP code reduces performance; since these transformations are not compiled in advance, they are carried out during run-time.
12)Before uploading a high volume of transaction data into InfoCubes, activate the number-range buffer for dimension IDs. The number-range buffer is a parameter that identifies the number of sequential dimension IDs stored in the memory. If you increase the number range before high-volume data upload, you reduce the number of reads from the dimension tables and hence increase the upload performance. Do not forget to set the number-range values back to their original values after the upload. Use transaction code SNRO to maintain the number range buffer values for InfoCubes.
13)Drop the indexes before uploading high-volume data into InfoCubes. Regenerate them after the upload. Indexes on InfoCubes are optimized for reading data from the InfoCubes. If the indexes exist during the upload, BW reads the indexes and tries to insert the records according to the indexes, resulting in poor upload performance. You can automate the dropping and regeneration of the indexes through InfoPackage scheduling. You can drop indexes in the Manage InfoCube screen in the Administrator Workbench.
14)IDoc (intermediate document) archiving improves the extraction and loading performance and can be applied on both BW and R/3 systems. In addition to IDoc archiving, data archiving is available for InfoCubes and ODS objects.
Hope it Helps
Chetan
@CP..

Query Performance issue in Oracle Forms

Hi All,
I am using oracle 9i DB and forms 6i.
In query form ,qry took long time to load the data into form.
There are two tables used here.
1 table(A) contains 5 crore records another table(B) has 2 crore records.
The recods fetching range 1-500 records.
Table (A) has no index on main columns,after created the index on main columns in table A ,the query is fetched the data quickly.
But DBA team dont want to create index on table A.Because of table space problem.
If create the index on main table (A) ,then performance overhead in production.
Concurrent user capacity is 1500.
Is there any alternative methods to handle this problem.
Regards,
RS

1) What is a crore? Wikipedia seems to indicate that it's either 10,000,000 or 500,000
http://en.wikipedia.org/wiki/Crore
I'll assume that we're talking about tables with 50 million and 20 million rows, respectively.
2) Large tables with no indexes are definitely going to be slow. If you don't have the disk space to create an appropriate index, surely the right answer is to throw a bit of disk into the system.
3) I don't understand the comment "If create the index on main table (A) ,then performance overhead in production." That seems to contradict the comment you made earlier that the query performs well when you add the index. Are you talking about some other performance overhead?
Justin

How to improve query performance built on a ODS

Hi,
I've built a report on FI_GL ODS (BW3.5). The report execution time takes almost 1hr.
Is there any method to improve or optimize th query performance that build on ODS.
The ODS got huge volume of data ~ 300 Million records for 2 years.
Thanx in advance,
Guru.

Hi Raj,
Here are some few tips which helps you in improving ur query performance
Checklist for Query Performance
1. If exclusions exist, make sure they exist in the global filter area. Try to remove exclusions by subtracting out inclusions.
2. Use Constant Selection to ignore filters in order to move more filters to the global filter area. (Use ABAPer to test and validate that this ensures better code)
3. Within structures, make sure the filter order exists with the highest level filter first.
4. Check code for all exit variables used in a report.
5. Move Time restrictions to a global filter whenever possible.
6. Within structures, use user exit variables to calculate things like QTD, YTD. This should generate better code than using overlapping restrictions to achieve the same thing. (Use ABAPer to test and validate that this ensures better code).
7. When queries are written on multiproviders, restrict to InfoProvider in global filter whenever possible. MultiProvider (MultiCube) queries require additional database table joins to read data compared to those queries against standard InfoCubes (InfoProviders), and you should therefore hardcode the infoprovider in the global filter whenever possible to eliminate this problem.
8. Move all global calculated and restricted key figures to local as to analyze any filters that can be removed and moved to the global definition in a query. Then you can change the calculated key figure and go back to utilizing the global calculated key figure if desired
9. If Alternative UOM solution is used, turn off query cache.
10. Set read mode of query based on static or dynamic. Reading data during navigation minimizes the impact on the R/3 database and application server resources because only data that the user requires will be retrieved. For queries involving large hierarchies with many nodes, it would be wise to select Read data during navigation and when expanding the hierarchy option to avoid reading data for the hierarchy nodes that are not expanded. Reserve the Read all data mode for special queriesu2014for instance, when a majority of the users need a given query to slice and dice against all dimensions, or when the data is needed for data mining. This mode places heavy demand on database and memory resources and might impact other SAP BW processes and tasks.
11. Turn off formatting and results rows to minimize Frontend time whenever possible.
12. Check for nested hierarchies. Always a bad idea.
13. If "Display as hierarchy" is being used, look for other options to remove it to increase performance.
14. Use Constant Selection instead of SUMCT and SUMGT within formulas.
15. Do review of order of restrictions in formulas. Do as many restrictions as you can before
calculations. Try to avoid calculations before restrictions.
17. Turn off warning messages on queries.
18. Check to see if performance improves by removing text display (Use ABAPer to test and validate that this ensures better code).
19. Check to see where currency conversions are happening if they are used.
20. Check aggregation and exception aggregation on calculated key figures. Before aggregation is generally slower and should not be used unless explicitly needed.
21. Avoid Cell Editor use if at all possible.
22. Make sure queries are regenerated in production using RSRT after changes to statistics, consistency changes, or aggregates.
23. Within the free characteristics, filter on the least granular objects first and make sure those come first in the order.

Query performance in two environments

Hi all,
I have developed simple select queries on a multiprovider and I am facing issues with query performance in quality box. A query runs pretty fast in in dev and return results while the same one dumps in Quality environment giving a time out error. This sounds more strange because our dev box has comparitively more records than the quality environment right now.
On anlyzing the query path in both environments, we noticed that the query does an index scan in dev but not in Quality environment, especially when the selection is such that the query is supposed to return lot of records. Since the query does a sequential scan in quality, it dumps. Is there any setting that I need to make seprately in the quality environment.
Any tips on query optimization would be great help. Thanks
Regards
Niranjana

Execute some of the RSRT tests in the QA for the query using "Execute+Debug" option and use some test for Multiprovider and Databases checks in it ,try to compare with Dev as well.
Hope it Helps
Chetan
@CP..

Weblogic 8.1.6 and Oracle 9.2.0.8 - query performance

Folks,
We are upgrading WebLogic from 8.1.5 to 8.1.6 and Oracle from 9.2.0.6 to 9.2.0.8. We use the Oracle thin client driver for 9.2.0.8 to connect from the application to Oracle.
When we use the following combination of the stack we see SQL query performance degradation: -
Oracle 9.2.0.8 database, Oracle 9.2.0.8 driver, WL 8.1.6
Oracle 9.2.0.8 database, Oracle 9.2.0.1 driver, WL 8.1.6
We do not see the degradation in case of the following: -
Oracle 9.2.0.8 database, Oracle 9.2.0.1 driver, WL 8.1.5
Oracle 9.2.0.6 database, Oracle 9.2.0.1 driver, WL 8.1.5
This shows that the problem could be with the WL 8.1.6 version and I was wondering if any of you have faced this before? The query retrieves a set of data from Oracle none of which contain the AsciiStream data type, which is noted as a problem in WL 8.1.6, but that too, only for WL JDBC drivers.
Any ideas appreciated.

Folks,
We are upgrading WebLogic from 8.1.5 to 8.1.6 and Oracle from 9.2.0.6 to 9.2.0.8. We use the Oracle thin client driver for 9.2.0.8 to connect from the application to Oracle.
When we use the following combination of the stack we see SQL query performance degradation: -
Oracle 9.2.0.8 database, Oracle 9.2.0.8 driver, WL 8.1.6
Oracle 9.2.0.8 database, Oracle 9.2.0.1 driver, WL 8.1.6
We do not see the degradation in case of the following: -
Oracle 9.2.0.8 database, Oracle 9.2.0.1 driver, WL 8.1.5
Oracle 9.2.0.6 database, Oracle 9.2.0.1 driver, WL 8.1.5
This shows that the problem could be with the WL 8.1.6 version and I was wondering if any of you have faced this before? The query retrieves a set of data from Oracle none of which contain the AsciiStream data type, which is noted as a problem in WL 8.1.6, but that too, only for WL JDBC drivers.
Any ideas appreciated.

System/Query Performance: What to look for in these tcodes

Hi
I have been researching on system/query performance in general in the BW environment.
I have seen tcodes such as
ST02 :Buffer/Table analysis
ST03 :System workload
ST03N:
ST04 : Database monitor
ST05 : SQL trace
ST06 :
ST66:
ST21:
ST22:
SE30: ABAP runtime analysis
RSRT:Query performance
RSRV: Analysis and repair of BW objects
For example, Note 948066 provides descriptions of these tcodes but what I am not getting are thresholds and their implications. e.g. ST02 gave tune summary screen with several rows and columns (?not sure what they are called) with several numerical values.
Is there some information on these rows/columns such as the typical range for each of these columns and rows; and the acceptable figures, and which numbers under which columns suggest what problems?
Basically some type of a metric for each of these indicators provided by these performance tcodes.
Something similar to when you are using an Operating system, and the CPU performance is consistently over 70% which may suggest the need to upgrade CPU; while over 90% suggests your system is about to crush, etc.
I will appreciate some guidelines on the use of these tcodes and from your personal experience, which indicators you pay attention to under each tcode and why?
Thanks

hi Amanda,
i forgot something .... SAP provides Early Watch report, if you have solution manager, you can generate it by yourself .... in Early Watch report there will be red, yellow and green light for parameters
http://help.sap.com/saphelp_sm40/helpdata/EN/a4/a0cd16e4bcb3418efdaf4a07f4cdf8/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
EarlyWatch focuses on the following aspects:
·        Server analysis
·        Database analysis
·        Configuration analysis
·        Application analysis
·        Workload analysis
EarlyWatch Alert a free part of your standard maintenance contract with SAP is a preventive service designed to help you take rapid action before potential problems can lead to actual downtime. In addition to EarlyWatch Alert, you can also decide to have an EarlyWatch session for a more detailed analysis of your system.
ask your basis for Early Watch sample report, the parameters in Early Watch should cover what you are looking for with red, yellow, green indicators
Understanding Your EarlyWatch Alert Reports
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b88cb90-0201-0010-5bb1-a65272a329bf
hope this helps.

Oracle Query Performance While calling a function in a View

Hi,
We have a performance issue in one of our Oracle queries.
Here is the scenario
We use a hard coded value (which is the maximum value from a table) in couple of DECODE statements in our query. We would like to remove this hard coded value from the query. So we wrote a function which will return a maximum value from the table. Now when we execute the query after replacing the hard coded value with the function, this function is called four times which hampers the query performance.
Pl find below the DECODE statements in the query. This query is part of a main VIEW.
Using Hardcoded values
=================
DECODE(pro_risk_weighted_ctrl_scr, 10, 9.9, pro_risk_weighted_ctrl_scr)
DECODE(pro_risk_score, 46619750, 46619749, pro_risk_score)
Using Functions
============
DECODE (pro_risk_weighted_ctrl_scr, rprowbproc.fn_max_rcsa_range_values ('CSR'), rprowbproc.fn_max_rcsa_range_values('CSR')- 0.1, pro_risk_weighted_ctrl_scr)
DECODE (pro_risk_score, rprowbproc.fn_max_rcsa_range_values ('RSR'), rprowbproc.fn_max_rcsa_range_values ('RSR') - 1, pro_risk_score)
Can any one suggest a way to improve the performance of the query.
Thanks & Regards,
Raji

drop table max_demo;
create table max_demo
(rcsa   varchar2(10)
,value number);
insert into max_demo
select case when mod(rownum,2) = 0
            then 'CSR'
            else 'RSR'
       end
,      rownum
from   dual
connect by rownum <= 10000;
create or replace function f_max (
i_rcsa    in   max_demo.rcsa%TYPE
return number
as
l_max number;
begin
   select max(value)
   into   l_max
   from   max_demo
   where rcsa = i_rcsa;
   return l_max;
end;
-- slooooooooooooowwwwww
select m.*
,      f_max(rcsa)
,      decode(rcsa,'CSR',decode(value,f_max('CSR'),'Y - max is '||f_max('CSR'),'N - max is '||f_max('CSR'))) is_max_csr
,      decode(rcsa,'RSR',decode(value,f_max('RSR'),'Y - max is '||f_max('RSR'),'N - max is '||f_max('RSR'))) is_max_rsr
from   max_demo m
order by value desc;
-- ssllooooowwwww
with subq_max as
     (select f_max('CSR') max_csr,
             f_max('RSR') max_rsr
      from   dual)
select m.*
,      decode(rcsa,'CSR',s.max_csr,'RSR',s.max_rsr) max
,      decode(rcsa,'CSR',decode(value,s.max_csr,'Y - max is '||s.max_csr,'N - max is '||s.max_csr)) is_max_csr
,      decode(rcsa,'RSR',decode(value,s.max_rsr,'Y - max is '||s.max_rsr,'N - max is '||s.max_rsr)) is_max_rsr
from   max_demo m
,      subq_max s
order by value desc;
-- faster
with subq_max as
     (select /*+materialize */
             f_max('CSR') max_csr,
             f_max('RSR') max_rsr
      from   dual)
select m.*
,      decode(rcsa,'CSR',s.max_csr,'RSR',s.max_rsr) max
,      decode(rcsa,'CSR',decode(value,s.max_csr,'Y - max is '||s.max_csr,'N - max is '||s.max_csr)) is_max_csr
,      decode(rcsa,'RSR',decode(value,s.max_rsr,'Y - max is '||s.max_rsr,'N - max is '||s.max_rsr)) is_max_rsr
from   max_demo m
,      subq_max s
order by value desc;
-- faster
with subq_max as
     (select f_max('CSR') max_csr,
             f_max('RSR') max_rsr,
             rownum
      from   dual)
select m.*
,      decode(rcsa,'CSR',s.max_csr,'RSR',s.max_rsr) max
,      decode(rcsa,'CSR',decode(value,s.max_csr,'Y - max is '||s.max_csr,'N - max is '||s.max_csr)) is_max_csr
,      decode(rcsa,'RSR',decode(value,s.max_rsr,'Y - max is '||s.max_rsr,'N - max is '||s.max_rsr)) is_max_rsr
from   max_demo m
,      subq_max s
order by value desc;
-- sloooooowwwwww
select m.*
,      decode(rcsa,'CSR',s.max_csr,'RSR',s.max_rsr) max
,      decode(rcsa,'CSR',decode(value,s.max_csr,'Y - max is '||s.max_csr,'N - max is '||s.max_csr)) is_max_csr
,      decode(rcsa,'RSR',decode(value,s.max_rsr,'Y - max is '||s.max_rsr,'N - max is '||s.max_rsr)) is_max_rsr
from   max_demo m
,      (select /*+ materialize */
             f_max('CSR') max_csr,
             f_max('RSR') max_rsr
      from   dual) s
order by value desc;
-- faster
select m.*
,      decode(rcsa,'CSR',s.max_csr,'RSR',s.max_rsr) max
,      decode(rcsa,'CSR',decode(value,s.max_csr,'Y - max is '||s.max_csr,'N - max is '||s.max_csr)) is_max_csr
,      decode(rcsa,'RSR',decode(value,s.max_rsr,'Y - max is '||s.max_rsr,'N - max is '||s.max_rsr)) is_max_rsr
from   max_demo m
,      (select f_max('CSR') max_csr,
               f_max('RSR') max_rsr,
               rownum
        from   dual) s
order by value desc;

OAF page : How to get its query performance from Oracle Apps Screen?

Hi Team,
How to get the query performance of an OAF page using Oracle Apps Screen ??
regards
sridhar

Go through this link
Any tools to validate performance of an OAF Page?
However do let us know as these queries performance can be check through backend also
Thanks
--Anil
http://oracleanil.blogspot.com/

Making a query performant

Similar Messages

Maybe you are looking for