Making an order payment using SecurePay and Paypal Standard gateway by API call-Order_PaymentProcess

PART_1
==================================
Hi,
I'm working at third party system which by API communicate with BC and in short:
1) create an order with specified products for specific customer) etc. at BC account ofcourse (works fine)
2) Make the payment using one of the payment gateway (defined in BC Payment gateway section)
a) SecurePay, or (works fine)
b) Paypal Website Standard (problem)
I found a litttle problem in API call to make the payment using paypal website standard (to be presice in case of Paypal option actually the user should be moved to the paypal website so the system should generate some link i think which will have some data which identify payment for specific order). I tried to use the Order_PaymentProcess (https://worldsecuresystems.com/catalystwebservice/catalystcrmwebservice.asmx?op=Order_Paym entProcess)
call but it looks it can't be done?
Please note the payment with this call using credit card details cause successfully use the SecurePay Payment gateway. Is here anyway who know the trick how to force (and what parameter should be used) to
make the payment using Paypal Website Standard?
And Yes I tried to obtain some additional documentation from BC support but without success (They said they are working at the new version of it... about 2 years ago they said they probably will prepare more detailed documentation ).
==================================
PART_2
In case if there is no possible to use the API call to force using the Paypal Website Standard is there any workaround of this?
I mean is it possible to move the user to the paypal site but in post data set some value which can be handled directly by the BC after making the payment at paypal site, so the BC then could for specific order automatically register this operation after paypal send the successfull payment notification?
==================================
PART_3
The third part is the question how to force by API call BC to send the invoice to the customer after the order will be created (and before making the payment).
The invoice is actually created only when the Order_PaymentProcess call will be finished with success (and the option "emailInvoiceToCustomer" will be set to true).
Is there any way to do that?
==================================
When You will answer please set note of what part is that answer.
Thanks for advice!

Dude, I don't know what you're saying. There's too much text and too much code, and the code is unformatted. When you post code, please use[code] and [/code] tags as described in Formatting tips on the message entry page. It makes it much easier to read.
However, based on the subject of your post, there's one thing I can say: If your key's state changes in a way that can affect the value of its hashcode, then you'll have to remove and re-add that key/value pair. Since the hashcode determines which subset the HashMap searches though to find your key, if your key doesn't have the same hashCode it has when you put it into the map, then the map will search the wrong bucket for your key.
If that doesn't help, please try to provide more concise, formatted code and a more concise explanation of the problem.

Similar Messages

About making a down payment using F-51(without posting through F-48)

Hi Friends,
There are situations where the client has to make a down payment against a P.O. (even before the invoice is recieved).
Then the normal process is to make a down payment using F-48 with a spl. GL indicator, in this process if there is TDS deducted as well.
Then they have to transfer the SPL GL to normal GL before making a full payment using F-54
Now the client feels that this is a tedious process to transfer from SPL GL to normal and then make payments, because they say they have quite a few transactions and so to keep a track of which transaction to reverse and which one not to, at the time of making complete payment.
So, Is it advisable to tell them to post the transaction for down payment using F-51 (If TDS is not required to be duducted)and as and when they get the invoice post the same using F-43, and while making a payment, can we ask them to post the remaining amount.
Is it inevitable to post the transaction in F-54, if there is a TDS that is deducted, or is there a work around solution for this.
Please clarify
regards
soujanya

Dear Soujanya,
There is no need to transfer the amount from the special gl to the normal gl each time. The user can at the time of making the final payment in F-58 or F-53, in the "Paid items" area can also give the special GL indicator say "A". Now when he clicks on the "Process open items", the invoice and the advance both appear. He can select both and the net of them can be paid.
Assign points if useful
regards
Venkatesh

Purchase Order to Purchase Order using BPEL and/or XML Gateway

Hi,
Is there a way to do create a duplicate Purchase Order in another instance using BPEL and/or XML Gateway? We're looking to do A2A transactions, namely duplicating data from one instance to another (of course the functional setups would have to be the same). Thanks!!

this is the perfect usace for the upcoming ESB (shuffling data with transforming from A to B) - but this can be done with BPEL too .. there are some solutions to this
1) on a database level (db to db)
2) having events setup'ed in the master instance, that fire a process that get's the data
3) and then using the functions from iRep
hth clemens

How do you set up the paypal standard gateway to work without a web form?

I must have missed a step. I have this site set up and the paypal standard gateway does not work with a web form, but works with shopping cart. Does that mean I need to disable the web form page and use something else to check out? How do you do this? The BC help page on this stops at this point in describing what to do.

For those who are running Windows and controlling the Airport Base Station with Airport for Windows. Apple just came out with a firmware update for Airport Extreme (7.7.2). It so happens that this Firmware version requires Airport Software version 6.3 or newer. The Windows version only goes as high as Version 5.6 or so. I was also told that Apple is unlikely to upgrade this software. To make a long story short you need to control (Configure) your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app. This solved my problems. Good Luck :)

Deleting Sales Order Details using BAPI_SALESORDER_CHANGE And Reinserting

Hi All,
I need to change a Sales Order in such a way that I would delete all the existing Line Items of that SO And then reinsert new Line Items as generally is the practice of saving a document.(Update Header-Delete Old Item Entries-Reinsert New Present Entries).
I coded a small test program in ABAP using the BAPI_SALESORDER_GETLIST And BAPI_SALESORDER_CHANGE.
In order to affect the Qty I have to update the Schedule Parameter also of the BAPI_SALESORDER_CHANGE Function.But this causes a new entry in VBEP.
eg:
Before BAPI Calls
SO-Number:9001
Header:9001,etc......
Detail:ItemNo=10,Material=xyz,TargetQty=100,etc..
Scedule:ItemNo=10,Scheduleline=1,Req_Qty=100,etc...
I coded the program such that
1.I Get the List of Items using BAPI_SALESORDER_GETLIST.
2.Call the BAPI_SALESORDER_CHANGE filling appropraite values in Parameters with UpdateFlag = 'D'
3.Insert new values in OrderItems And Schedule Parameters
say:
Detail:ItemNo=10,Material=xyz,TargetQty=25,etc..
Scedule:ItemNo=10,Scheduleline=1,Req_Qty=25,etc...
4.Call the BAPI_SALESORDER_CHANGE filling appropraite values in Parameters with UpdateFlag = 'I'
The output now becomes.Header:9001,etc......
Detail:ItemNo=10,Material=xyz,TargetQty=100,etc..
Scedule:ItemNo=10,Scheduleline=1,Req_Qty=100,etc...
ItemNo=10,Scheduleline=2,Req_Qty=25,etc...
Now After Commit when I see my SO it shows me a qty of
125.
I am attaching the code for your analysis.
Thanx in advance.
*& Report ZSM_CHANGESALESORDER *
REPORT ZSM_CHANGESALESORDER .
DATA:
For Calling the GetList BAPI Function
CUSTOMER_NUMBER LIKE BAPI1007-CUSTOMER,
SALES_ORGANIZATION LIKE BAPIORDERS-SALES_ORG,
IT_SALES_ORDERS LIKE TABLE OF BAPIORDERS,
WA_SALES_ORDERS LIKE LINE OF IT_SALES_ORDERS,
IT_RETURN LIKE TABLE OF BAPIRETURN,
WA_RETURN LIKE LINE OF IT_RETURN.
For Calling the ChangeFromData BAPI Function
DATA:
SALESDOCUMENT LIKE BAPIVBELN-VBELN,
WA_ORDER_HEADER_IN LIKE BAPISDH1,
WA_ORDER_HEADER_INX LIKE BAPISDH1X,
IT_ORDER_ITEM_IN LIKE TABLE OF BAPISDITM ,
WA_ORDER_ITEM_IN LIKE LINE OF IT_ORDER_ITEM_IN,
IT_ORDER_ITEM_INX LIKE TABLE OF BAPISDITMX ,
WA_ORDER_ITEM_INX LIKE LINE OF IT_ORDER_ITEM_INX,
IT_SCHEDULE_LINES LIKE TABLE OF BAPISCHDL ,
WA_SCHEDULE_LINES LIKE LINE OF IT_SCHEDULE_LINES,
IT_SCHEDULE_LINESX LIKE TABLE OF BAPISCHDLX ,
WA_SCHEDULE_LINESX LIKE LINE OF IT_SCHEDULE_LINESX,
IT_RETURN_CHG LIKE TABLE OF BAPIRET2,
WA_RETURN_CHG LIKE LINE OF IT_RETURN_CHG.
DATA:
IT_RETURN_CT LIKE BAPIRET2.
PARAMETERS:
P_SO LIKE VBAK-VBELN,
P_CUSTNO LIKE BAPI1007-CUSTOMER,
P_SORG LIKE BAPIORDERS-SALES_ORG.
START-OF-SELECTION.
SALESDOCUMENT = P_SO.
CUSTOMER_NUMBER = P_CUSTNO.
SALES_ORGANIZATION = P_SORG.
Retrieve the Existing Sales Order details for that Sales Order.
PERFORM GETREQSODETAILS.
Delete the Existing Sales Order details from that Sales Order.
PERFORM DELETEOLDSODETAILS.
Insert New details for that Sales Order.
 PERFORM ADDNEWSODETAILS.
END-OF-SELECTION.
PERFORM COMMITTRANS.
*& Form GetReqSODetails
FORM GETREQSODETAILS .
CALL FUNCTION 'BAPI_SALESORDER_GETLIST'
 EXPORTING
 CUSTOMER_NUMBER = CUSTOMER_NUMBER
 SALES_ORGANIZATION = SALES_ORGANIZATION
 IMPORTING
 RETURN = WA_RETURN
 TABLES
 SALES_ORDERS = IT_SALES_ORDERS.
*delete the Sales Order Details of Sales Orders other than the req.One
IF NOT IT_SALES_ORDERS[] IS INITIAL.
 SORT IT_SALES_ORDERS BY SD_DOC.
 LOOP AT IT_SALES_ORDERS INTO WA_SALES_ORDERS.
 IF WA_SALES_ORDERS-SD_DOC NE SALESDOCUMENT.
 DELETE IT_SALES_ORDERS.
 ENDIF.
 ENDLOOP.
ENDIF.
ENDFORM. " GetReqSODetails
*& Form deleteOldSODetails
FORM DELETEOLDSODETAILS .
DATA: IRECCOUNT TYPE I.
IRECCOUNT = 1.
*Clear all the Inernal Tables And Work Areas
*and Update the SO Header Index
PERFORM CLEARDATA.
PERFORM SOHEADERINDEX.
LOOP AT IT_SALES_ORDERS INTO WA_SALES_ORDERS.
*Fill the Order Details Index Internal Table
 PERFORM FILLSODELETEDTLS_INDEX_PARAM
 USING WA_SALES_ORDERS-ITM_NUMBER 'D'.
*Fill the Order Scedule Index Internal Table
 PERFORM FILLSODELETESCH_INDEX_PARAM
 USING WA_SALES_ORDERS-ITM_NUMBER IRECCOUNT 'D'.
ENDLOOP.
*call the Sales Order Change Fumction to delete the Existing Data
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
 EXPORTING
 SALESDOCUMENT = SALESDOCUMENT
 ORDER_HEADER_INX = WA_ORDER_HEADER_INX
 TABLES
 RETURN = IT_RETURN_CHG
 ORDER_ITEM_INX = IT_ORDER_ITEM_INX
 SCHEDULE_LINESX = IT_SCHEDULE_LINESX.
ENDFORM. " deleteOldSODetails
*& Form SOHeaderIndex
FORM SOHEADERINDEX .
WA_ORDER_HEADER_INX-UPDATEFLAG = 'U'.
ENDFORM. " SOHeaderIndex
*& Form FillSODeleteDtls_Index_param
FORM FILLSODELETEDTLS_INDEX_PARAM
USING VALUE(P_ITM_NUMBER) VALUE(P_FLAG).
WA_ORDER_ITEM_INX-ITM_NUMBER = P_ITM_NUMBER.
WA_ORDER_ITEM_INX-UPDATEFLAG = P_FLAG.
APPEND WA_ORDER_ITEM_INX TO IT_ORDER_ITEM_INX.
ENDFORM. " FillSODeleteDtls_Index_param
*& Form FILLSODELETEsch_Index_PARAM
FORM FILLSODELETESCH_INDEX_PARAM
USING VALUE(P_ITM_NUMBER) VALUE(P_RECCOUNT) VALUE(P_FLAG).
WA_SCHEDULE_LINESX-ITM_NUMBER = P_ITM_NUMBER.
WA_SCHEDULE_LINESX-SCHED_LINE = P_RECCOUNT.
WA_SCHEDULE_LINESX-UPDATEFLAG = P_FLAG.
APPEND WA_SCHEDULE_LINESX TO IT_SCHEDULE_LINESX.
ENDFORM. " FILLSODELETEsch_Index_PARAM
*& Form addnewSODETAILS
FORM ADDNEWSODETAILS .
DATA: IRECCOUNT TYPE I, ITEMNO TYPE I.
IRECCOUNT = 1.
*Clear all the Inernal Tables And Work Areas
*and Update the SO Header Index
PERFORM CLEARDATA.
PERFORM SOHEADERINDEX.
WHILE IRECCOUNT <= 1.
 ITEMNO = IRECCOUNT * 10.
*Fill the New Order Details in the Internal Table
 PERFORM FILLSODTLDATA USING ITEMNO 'TEST FG' 37 .
*Fill the Order Details Index Internal Table
 PERFORM FILLSODELETEDTLS_INDEX_PARAM USING ITEMNO 'I'.
*Fill the New Schedule Details in the Internal Table
 PERFORM FILLSOSCHDATA USING ITEMNO IRECCOUNT 37 .
*Fill the Order Scedule Index Internal Table
 PERFORM FILLSODELETESCH_INDEX_PARAM
 USING ITEMNO IRECCOUNT 'I'.
 IRECCOUNT = IRECCOUNT + 1.
ENDWHILE.
*call the Sales Order Change Fumction to Insert New Data
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
 EXPORTING
 SALESDOCUMENT = SALESDOCUMENT
 ORDER_HEADER_INX = WA_ORDER_HEADER_INX
 TABLES
 RETURN = IT_RETURN_CHG
 ORDER_ITEM_IN = IT_ORDER_ITEM_IN
 ORDER_ITEM_INX = IT_ORDER_ITEM_INX
 SCHEDULE_LINES = IT_SCHEDULE_LINES
 SCHEDULE_LINESX = IT_SCHEDULE_LINESX.
ENDFORM. " addnewSODETAILS
*& Form clearData
FORM CLEARDATA .
CLEAR WA_ORDER_HEADER_INX.
CLEAR WA_ORDER_ITEM_INX.
REFRESH IT_ORDER_ITEM_INX.
CLEAR WA_SCHEDULE_LINESX.
REFRESH IT_SCHEDULE_LINESX.
CLEAR WA_RETURN.
REFRESH IT_RETURN.
CLEAR WA_ORDER_ITEM_IN.
REFRESH IT_ORDER_ITEM_IN.
CLEAR WA_SCHEDULE_LINES.
REFRESH IT_SCHEDULE_LINES.
ENDFORM. " clearData
*& Form FILLSODTLDATA
FORM FILLSODTLDATA USING VALUE(P_ITEMNO) VALUE(P_MATERIAL)
VALUE(P_TARGET_QTY) .
WA_ORDER_ITEM_IN-ITM_NUMBER = P_ITEMNO.
WA_ORDER_ITEM_IN-MATERIAL = P_MATERIAL.
WA_ORDER_ITEM_IN-TARGET_QTY = P_TARGET_QTY.
APPEND WA_ORDER_ITEM_IN TO IT_ORDER_ITEM_IN.
ENDFORM. " FILLSODTLDATA
*& Form FILLSOschDATA
FORM FILLSOSCHDATA USING VALUE(P_ITEMNO)
 VALUE(P_RECCOUNT)
 VALUE(P_REQ_QTY) .
WA_SCHEDULE_LINES-ITM_NUMBER = P_ITEMNO.
WA_SCHEDULE_LINES-SCHED_LINE = P_RECCOUNT.
WA_SCHEDULE_LINES-REQ_QTY = P_REQ_QTY.
APPEND WA_SCHEDULE_LINES TO IT_SCHEDULE_LINES.
ENDFORM. " FILLSOschDATA
*& Form committrans
FORM COMMITTRANS .
DATA:SUCCESSFLAG(1).
LOOP AT IT_RETURN_CHG INTO WA_RETURN_CHG.
 IF WA_RETURN_CHG-TYPE = 'S'
 AND WA_RETURN_CHG-ID = 'V1'
 AND WA_RETURN_CHG-NUMBER = 311
 AND SUCCESSFLAG IS INITIAL.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 WAIT = 'X'
 IMPORTING
 RETURN = IT_RETURN_CT.
 SUCCESSFLAG = 'X'.
 ENDIF.
ENDLOOP.
IF SUCCESSFLAG IS INITIAL.
 WRITE: 'SORRY SOME ERROR'.
ELSE.
 WRITE: 'SUCCESSFUL'.
ENDIF.
ENDFORM. " committrans

Thanx wolfgang,
I needed that info.
As I had mentioned in the earlier posts, I want to delete the old Sales Order Item Details,
Schedule Details,Basic Price data And Reinsert data in the same.
I am giving u the algo that I have used.
1.Get the SalesOrder Details for a particular Sales Order using BAPI_SALESORDER_GETLIST(para:customer & sales Org and then deleting unwanted SO data).
2.Delete the Sales Order Item Details,Schedule Details using BAPI_SALESORDER_CHANGE.
3.Commit Transaction(If I dont use this commit Error comes in Step No.7 while Commiting)
using BAPI_TRANSACTION_COMMIT.
4.Check Return Table of both BAPI_SALESORDER_CHANGE and BAPI_TRANSACTION_COMMIT.
5.if Step No.4 is Not okay then Rollback(BAPI_TRANSACTION_TRANSACTIN) and Exit else move to step 6.
6.Add New Sales Order Item Details,Schedule Details, Basic Price using BAPI_SALESORDER_CHANGE.
7.Commit Transaction using BAPI_TRANSACTION_COMMIT.
8.Check Return Log of both BAPI_SALESORDER_CHANGE and BAPI_TRANSACTION_COMMIT.
9.if Step No.9 is okay then Exit else Rollback(BAPI_TRANSACTION_TRANSACTIN) and move to step 10.
10.Add Old Sales Order Item Details,Schedule Details, Basic Price from Data available in Internal
table(Filled in step.1 ) using BAPI_SALESORDER_CHANGE.
11.Commit Transaction using BAPI_TRANSACTION_COMMIT.
 This works fine in 1 server in which I get the message of Incomplete Data,etc...when I make a Sales Order from va01.
But in another server where I dont this message,I get error in step 7 or 11 as per the flow.
The return structure of BAPI_TRANSACTION_COMMIT contains error with Message 'Updating was not possible'. Also the message 'Updation was terminated' cms frm the SAP server.
 What could be the reason?
Thanx in advance

Good morning, I've try to update the software from my IPad, and suddenly I got the the message to conect to Itunes on the screen. I have conected to Itunes and it say I have to restore my Ipad in order to use ITunes and if I restore it I will lose all the

I've try to update the software of my IPad from my IPad. Suddenly I got the message to conect it to iTunes, so I have connected to ITunes and in order to use ITunes I need to restore the IPad and I will lose all thee data from my Ipad (pictures, music, etc).
My IPad is block now with the ITunes message on the screen and I can not get it off.
HELPPPPP, thank's

And there is no other way to do it? I can't believe I will lose all data.
I used to do all the software updates with the IPad not using ITunes.

Example on one order framework using Guid and ref_guid on table level

Hi Forum,
I am new to CRM can someone explain me the one order framework in header and item level tables with an example. I am unable to figure out what is the difference. crmd_orderadm_h and crmd_orderadm_i tables how do we connect them in which field and how is GUID and REF_GUID Related.
Thanks in Advance
Mathew Hayden.

Hi Mathew,
The guid in crmd_orderadm_h table is the guid of a transaction header,for example of a contract.
the guid in crmd_orderadm_i table is the guid of a item of a transaction , for example item of a contract .
the link between these two tables is the guid of crmd_orderadm_h table is the header field of
crmd_orderadm_i table.
Thanks.
with regards,
Taity

Line details sort order when using Pick and Pack

Hi,
A customer of mine recently complained (very small complain) that when he used "Per date" as a sort when using Pick & Pack, that the line details where not grouped together by Sales Order Number.
Example:
2008/11/23   SO1001 - Line 1
2008/11/23   SO1013 - Line 3
2008/11/23   SO1001 - Line 2
2008/11/23   SO1001 - Line 4
2008/11/23   SO1021 - Line 1
2008/11/23   SO1001 - Line 5
etc...
Is there a way to sort records on two columns instead of just one? or would there be another workaround this issue?
Thanks
Charles

I think I found my answer, sorting data using the Data/Sort feature allows for sorting on multiple columns.

Connecting to Remote Desktop using proxy and Remote Desktop Gateway?

I have setup a Remote Desktop Gateway server using Windows Server 2012 R2. I am using the Remote Desktop Gateway as an intermediary between to provide the remote desktop session over 443 since 3389 is blocked at many client locations.
However, I ran into a problem with a client who's using a web proxy.
Is is possible to configure Remote Desktop to connect via web proxy? If so, how? If not does any one have any suggestions on how to provide a Remote Desktop session via 443 over proxy for situations where you don't control the client's PC or network? Does RemoteApps
allow for access via web proxy when using RD Gateway?
The error message is below:
Your computer can't connect to the remote computer because the web proxy server requires authentication. To allow unauthenticated traffic to an RD Gateway server through your web proxy server, contact your network administrator.
Thanks for any help!

Hi,
My suggestion is to setup a RD Web Access server and make it available for your clients via proxy.
Remote Desktop Web Access (RD Web Access)
http://technet.microsoft.com/en-us/library/cc731923.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Can you use Sage Pay and PayPal Pro

Hi,
Is it possible to use both Sage Pay and PayPal Pro on the BC system?
We currently have Sage Pay and standard PayPal but our client now wants to add PayPal Pro.
Regards
Chris

Nope, you can only use one main payment gateway and paypal standard as an alternative.

Error in sales order creation using bapi

Hi,
Iam trying to create sales order by using BAPI_SALESORDER_CREATEFROMDAT1 and when iam trying to execute
the function module by passing all th eparameters and iam getting the error as
inspite of entering sold_to_party and ship_to_party details in table ORDER_PARTNERS
"enter the sold_to_party or ship to party details"
please help me out in this isue its an urgent.
Thanks.
sayed.

Can you share the codes ?
Thanks.
Ashish

Purchase order layout using Smartform

Hi All,
Can anyone let me know how to create Purchase order layout using smartforms and assigning it to output type.
Is there standard smartform for purchase order?

http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
http://www.sap-basis-abap.com/sapsf001.htm
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
http://www.esnips.com/doc/13b7ae7a-b32c-4b96-b588-881859d4ac99/Template,Table,Loop,Command-in-Smartforms.doc
http://www.esnips.com/doc/97acb00a-e513-4611-91f0-c626f460bfc5/Smart_Form_Overview.pdf
http://www.esnips.com/doc/77a981b9-8fe3-4fbb-8101-67745c1fe60c/SMART-FORMS_shail.ppt
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Try this. A simple sample Smart Form.
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
SMARTFORMS GENERATION: (calling internal table fields)
 Open a smartform using the tcode smartforms.
 Usually form attributes shows admn data.
 In the form interface declare import/export parameters if any. Else declare the tables in tables tab button.
 In the windows and pages expand and create a table. It automatically generates header, main area and footer for the table.
 In data tab button in the table we usually declare a work area to bring the data from se38. Like: ktab into wa. ( The purpose of declaring the wa is , to get the data of the ktab in to header from the body area of the internal table).
 And in the tablepainter pushbutton in table we can have any no of line types. Depending on the requirement. ( for ex: If we want to devide a row in to 4 columns, we can devide it as 4,4,4,4cm as line type 1, And usually for the footer we dont need no of columns, So, we declare it as one column with 16cm measure with the name line type 2.). We can use these line types in the tables.
 In the header right click>>create>>tableline. It asks for line type. Select one line type which is appropriate.
 Like same create a row2 in main area using right click. If we select the line type 1, it automatically generates 4 cells. We can create text in each cell as per requirement.
 We can generate general attributes using general attributes tab button in the text. Or in the other way. We can switch on the field list on/off button from the application tool bar. It displays all the attributes in the left down corner of the screen. We can drag and drop the required fields in the general attributes tab button of the text.
 We continue the same procedure for all the texts. The texts should be displayed in the gray color. Then only it can collects the data from the abap editor fields.
 If it wont turns gray, we can check the fields in the editor by changing it to the line editor. The best thing is to drag the fields from the list, rather than declaring like &wa-matnr&
 In the footer also we create a line type and in that table line we create text.
SE38 PROGRAM(method I):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
data: FM_NAME TYPE RS38L_FNAM.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in
S_MATNR.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_MYFIRST_FORM2'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IN THE OTHER WAY(method II):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in S_MATNR.
CALL FUNCTION '/1BCDWB/SF00000199'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In the method I we are calling the amartform dynamically using the function module 'SSF_FUNCTION_MODULE_NAME'.
Here we are exporting form name and importing fm_name.
So we need to declare the variable fm_name as
data: FM_NAME TYPE RS38L_FNAM.
We can have the type of the fm_name in the function module 'SSF_FUNCTION_MODULE_NAME' (in the export tab button).
Since we are passin the name of the Function module generated by the smart form in to the fm_name variable. We run the function module with the name fm_name, but not the FM generated by the smartform(like /1BCDWB/SF00000199)¬¬¬¬¬¬.
In the method II we directly call the smartform generated function module (i.e, /1BCDWB/SF00000199).
But the method I is recommended. In the method I, The fm_name is a variable we dont put it in the quotes while calling.
In the both methods we declare the internal table using the like option, but not begin of. end of. And in select statement we select *, But not individual fields.
EX2:
SMART FORM NAME: ZGITI_FORM1.
SE38:
REPORT Z_CALL_GIRI_FORM1 .
TABLES: VBRK.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE T1.
SELECT-OPTIONS: S_VBELN FOR VBRK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
*INITIALIZATION.
*T1 = 'SELECTION-CRIETERIA'.
DATA: BEGIN OF I_INVOICE OCCURS 1.
INCLUDE STRUCTURE ZSTR_INVOICE.
DATA: END OF I_INVOICE.
DATA: VAR1 LIKE VBRP-NETWR.
DATA: BEGIN OF I_ADDRESS OCCURS 1.
INCLUDE STRUCTURE ZSTR_ADDRESS.
DATA: END OF I_ADDRESS.
DATA: BEGIN OF I_ORDER OCCURS 1.
INCLUDE STRUCTURE ZSTR_ORDER.
DATA: END OF I_ORDER.
DATA: BEGIN OF I_ITEM OCCURS 1.
INCLUDE STRUCTURE ZSTR_ITEM.
DATA: END OF I_ITEM.
DATA: BEGIN OF I_VBFA OCCURS 1,
VBELV LIKE VBFA-VBELV,
VBELN LIKE VBFA-VBELN,
END OF I_VBFA.
SELECT KUNAG VBELN VKORG VTWEG SPART FROM VBRK INTO TABLE I_INVOICE
WHERE VBELN IN S_VBELN.
IF I_INVOICE[] IS NOT INITIAL.
SELECT KUNNR LAND1 NAME1 NAME2 ORT01 PSTLZ REGIO FROM
KNA1 INTO CORRESPONDING FIELDS OF TABLE I_ADDRESS FOR ALL ENTRIES IN
I_INVOICE WHERE KUNNR = I_INVOICE-KUNAG.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT VBELV VBELN FROM VBFA INTO TABLE I_VBFA FOR ALL ENTRIES IN
I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
IF I_VBFA[] IS NOT INITIAL.
SELECT VBELN BSTNK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE I_ORDER
FOR ALL ENTRIES IN I_VBFA WHERE VBELN = I_VBFA-VBELV.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT POSNR MATNR ARKTX FKIMG NETWR FROM VBRP INTO TABLE I_ITEM FOR ALL
ENTRIES IN I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
LOOP AT I_ITEM.
AT LAST.
SUM.
VAR1 = I_ITEM-NETWR.
ENDAT.
ENDLOOP.
CALL FUNCTION '/1BCDWB/SF00000223'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
var = VAR1
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
tables
i_vbrk = I_INVOICE
i_vbak = I_ORDER
i_vbrp = I_ITEM
i_kna1 = I_ADDRESS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Can we create the Purchase order that using P&L account or just using account do not use cost center.

Dear Experts,
Could you please advise :
1) Can we create the purchase order that using profit and loss account ? ( if yes , which kind of account assignment category we should use ?)
2) How to create a purchase order for service charge .( just using GL account )
Thanks & Best Regards,
Watson

Hi,
   May I know why you do not use cost center for consumption?
   You may create a new account assignment category in OME9 by copying K and maintain the cost center as optional. Please note that you have to maintain the item category blank and the account assignment category combination in OMG0. Now, you can use a GL account in PO which doesnt require a cost center assignment (in OBC4 against the field status group of the GL)
   You may use the same account assignment category created in the previous step with item category D, after you maintain the combination of the account assignment with item category D in OMG0.
    Please test the scenario and revert back.
Regards,
AKPT

Do I need to purchase iwork in order to use it?

I have an iphone5 and ipad mini, and I am using tthe free 5G icloud. I wanted to save other things than just pictures on the icloud. Do i have to purchase iwork in order to use it and if so are ther any other free options available to save docs to icloud? Oh, I'm using Windows 7
Also can I store movies on Icloud at all?

Hi DewDah,
As Steve indicated, the app cannot be purchased for Windows. If you have an iDevice, you can purchase the app for the device. And you can also share Microsoft Office documents (Word, Excel, Powerpoint) from you PC with iWork documents (Pages, Numbers, Keynote) on your iDevice and vice versa:
http://www.apple.com/iwork/compatibility/
Take a look at the video in this link. It will show you how you would be able to share the documents. Once they are in the iWork format, they would be saved to iCloud as long as you have the Documents & Data option turned on in Settings>iCloud on your device.
Cheers,
GB

To use JMS and JNDI in JDev 9.0.3.4

Do I need to add additional librararies in order to use JMS and JNDI along with EJB's in the enterprise application I'm creating?

No the article is not applicable for 9.0.3 I've never tested the compatibility of the 9.0.3 + Struts integration - obviously it does not work.
What does work is the ADF bindings used in 9.0.5 and above which can be safely used with newer versions of Struts.

Making an order payment using SecurePay and Paypal Standard gateway by API call-Order_PaymentProcess

Similar Messages

Maybe you are looking for