Making Charts with Multiple Rows in Tables

I was wondering if anyone has figured out a way to make a chart that graphs multiple rows of data from a table in only one data set.

Ryan,
Ok, now we see what you are working with, but are still confused by what you want to do.
You have two charts showing the same two years of running records. The top chart has the years superimposed over each other, and the bottom chart shows the years consecutively.
Are you trying to take prior years (not shown) from the bottom chart and superimpose them in the top chart? If so, add as many rows to the top chart as there are years you are copying. Then use the formula:
=Total Running Milage :: x2 where x2 is the first cell for the year involved. Copy the formula across to complete the year and repeat for as many years as you are transferring. When you are satisfied with the results, change all those formulas you placed in the top table to values (copy the block of cells, Edit > Paste Values). Finally, you can delete the bottom chart. But be sure to paste values before deleting the bottom chart.
pw

Similar Messages

Drill Down between 2 stacked column chart with multiple rows.

Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region                Q2                Q3               Q4
Other              3658              3497               497
NA - North
America                3               3               1101
APJK     1     4     597
UK               324
EMEA North     1     1     288
CORPORATE     1     5     215
LA -
Latin America1     2     208
EMEA     1          199
EMEA South     1     1     169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region     Priority     Q2     Q3     Q4
Other     D: End of Next Day     1568     1613     239
Other     C: End of Day     983     893     119
Other     A: 2 Hour     631     610     70
Other     B: 4 Hour     396     318     56
NA -
North AmericaD: End of Next Day     2     2     514
APJK     D: End of Next Day          3     297
NA -
North AmericaC: End of Day               284
NA -
North AmericaA: 2 Hour     1          170
UK     D: End of Next Day               157
APJK     C: End of Day     1     1     152
Other     E: 3 - 5 Business Days     68     58     13
EMEA North     D: End of Next Day          1     136
CORPORATE     D: End of Next Day          4     107
NA - North America     B: 4 Hour          1     104
LA - Latin America     D: End of Next Day     1     1     86
EMEA     D: End of Next Day               86
UK     C: End of Day               85
APJK     A: 2 Hour               79
EMEA South     D: End of Next Day               72
EMEA North     A: 2 Hour               69
EMEA North     C: End of Day               56
APJK     B: 4 Hour               55
EMEA     C: End of Day     1          53
LA - Latin America     C: End of Day               54
UK     A: 2 Hour               49
EMEA South     C: End of Day     1          44
CORPORATE     A: 2 Hour          1     43
CORPORATE     C: End of Day               44
LA - Latin America     A: 2 Hour          1     42
EMEA South     A: 2 Hour          1     32
EMEA     B: 4 Hour               30
UK     B: 4 Hour               30
EMEA     A: 2 Hour               27
EMEA North     B: 4 Hour     1          26
NA -
North AmericaE: 3 - 5 Business Days               25
LA - Latin America     B: 4 Hour               23
EMEA South     B: 4 Hour               20
CORPORATE     B: 4 Hour               17
APJK     E: 3 - 5 Business Days               13
Other     F: 6 - 10 Business Days     6     4
Other     G: 11 - 20 Business Days     6     1

Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept.

How to extract a clob xml string with multiple row of table tag. in 10g

i have a xml value like:
<table><c1>0</c1><c2>Mr</c2><c3>abc</c3><c4>Sharma</c4></table>
<table><c1>0</c1><c2>Mrs</c2><c3>abcd</c3><c4>Sharma</c4></table>
<table><c1>0</c1><c2>Mr</c2><c3>sabc</c3><c4>Sharma</c4></table>
<table><c1>0</c1><c2>Mrs</c2><c3>sdabc</c3><c4>Sharma</c4></table>
<table><c1>0</c1><c2>Mr</c2><c3>dabc</c3><c4>Sharma</c4></table>
<table><c1>0</c1><c2>Mr</c2><c3>adbc</c3><c4>Sharma</c4></table>
i want to insert each of <c> value in a table with respective columns according c1,c2,c3,c4
pls suggest me what to do
I use extract(xml, '/table) tab but it just read first one line & return error for other

Can you plz explain to me thisIt is because you did not provide us with a valid xml structure so I used 11g's xmlparse function to create a xmltype even with the xml not being valid (no root tag).
With a valid xml structure I could use the xmltype constructor instead and go on the same way as before:
SQL> select *
from xmltable (
         'table'
         passing xmltype ('
                        <root>
                        <table><c1>0</c1><c2>Mr</c2><c3>abc</c3><c4>Sharma</c4></table>
                        <table><c1>0</c1><c2>Mrs</c2><c3>abcd</c3><c4>Sharma</c4></table>
                        <table><c1>0</c1><c2>Mr</c2><c3>sabc</c3><c4>Sharma</c4></table>
                        <table><c1>0</c1><c2>Mrs</c2><c3>sdabc</c3><c4>Sharma</c4></table>
                        <table><c1>0</c1><c2>Mr</c2><c3>dabc</c3><c4>Sharma</c4></table>
                        <table><c1>0</c1><c2>Mr</c2><c3>adbc</c3><c4>Sharma</c4></table>
                        </root>').extract ('root/table')
         columns c1 number path 'c1', c2 varchar2 (4) path 'c2', c3 varchar2 (6) path 'c3', c4 varchar2 (6) path 'c4')
        C1 C2     C3        C4
         0 Mr     abc       Sharma
         0 Mrs    abcd      Sharma
         0 Mr     sabc      Sharma
         0 Mrs    sdabc     Sharma
         0 Mr     dabc      Sharma
         0 Mr     adbc      Sharma
6 rows selected.

TO DRAW A TABLE WITH MULTIPLE ROWS AND MULTIPLE COLOUMNS IN FORM

Hi,
How to draw a table with multiple rows and columns seperated by lines in form printing?

check this
http://sap-img.com/ts003.htm
Regards
Prabhu

Editable table with multiple rows

Hi All!
We're trying to develop some application in VC 7.0. That application should read data from some R/3 tables (via standard and custom functional modules), then display data to user and allow him/her to modify it (or add some data into table rows), and then save it back to R/3.
What is the best way to do that?
There's no problem with displaying data.
But when I try to add something to table (on portal interface), I'm able to use only first row of the table... Even if I fill all fields of that row, I'm not able to add data to second row, etc.
Second question. Is it possible to display in one table contents of output of several BAPIs? For example we have three bapis, one displaying user, second displays that user's subordinates, and the third one - that user's manager. And we want one resulting table...
And last. What is the best way to submit data from table view in VC (portal) to R/3 table? I understand that we should write some functional module, that puts data to R/3. I'm asking about what should be done in VC itself. Some button, or action...
Any help will be appreciated and rewarded :o)
Regards,
DK

Here are some former postings:
Editable table with multiple rows
and
Editable table with multiple rows
Are you on the right SP-level?
Can you also split up your posting: one question, one posting? This way you get faster answers, as people might just browse the headers.

Table row with multiple row

Hi All,
I am using NWDS 2004
I want to have a table with multiple rows in a row.
Can any one help ?
Thanks

hi Akhilesh,
Use tree table for your requirement.
[Tree Table Tutorial|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/de59f7c2-0401-0010-f08d-8659cef543ce]
Hope this helps!
Monalisa

Creating SVG Chart with multiple lines

Hi All,
I want to create a chart with multiple lines.
Ex: I have one emp table with empno, sal and deptno columns.
I want to print deptno in x axis and no of employees on y axis.
I want to print one line for employees with sal > 15000 and one more line for employee with sal =< 15000
So one line will show no of employees with sal more than 15000 for each dept. Similar case for the other line and these 2 lines should be in different colors.
For one line the query will go as
select link, deptno, count(empno)
from emp where sal > 15000 group by null, deptno
Is this possible to draw this chart?
Thanks,
Manoj

I wasn't able to do something like what you describe, but I was able to do this:
I defined column A of the table as a Header Row, selected the cells in the table, and chose this chart type (2D 2 Axis):
Then I clicked the chart and in the pane at the right checked 'Axis Name' in the Axis tab and added the axis names.
Maybe this can give you an idea of how you can illustrate the relationships that you want to show.
SG

Line Chart with Multiple Series

Post Author: JayZee
CA Forum: Charts and Graphs
HI
I am trying to create a line chart with multiple series for trend analysis on CR XI but not having much luck, I thought it would be so simple to do!
My data is provided summarized on the server and is returned as 12 rows:
Month Year1 Year2 Year3 Year4 Year5January 100 80 75 90 120February 85 25 40 25 80etc for the rest of the months
My problem is that I can only get the chart to accept the values to display as a summary and not just as the data pulled back from the server. I have read an article on the support site for Crystal 6.0 but it doesn't seem to translate well into XI.
If necessary I could redesign the table to bring back un-summarized data but that is quite a big job.
Any help greatly appreciated.
Jay

Post Author: Tim Wise
CA Forum: Charts and Graphs
In the chart expert, put Month in the 'On change of' box and put each year in the 'Show values' box. This puts the month on the x-axis and plots each year as a line.
Is that what you want?
I did this in CR 2008 using your data in an Excel sheet.

Multiple rows in table popin

Hi Experts,
I have a requirement to have multiple rows in the table popin, that is , having a table with multiple rows as the table popin.
For further information, the exact requirement is , there is a table which will have one of the column containing a button, EXPAND , clicking which a table needs to be displayed below the row, (same as it happens for Table popins) and EXpand button becomes COLLAPSE button after it is clicked. Now clicking the Collapse button should close the table showed in Table popin.
Kindly help for the above requirement.
Thanks in Advance for help
Shilpa.

LOOP AT wd_this->comp_tab INTO w_comp_tab.
     lv_uielement_id_prefix = lv_uielement_id_prefix && iv_col_num.
      IF w_comp_tab-name NE 'SELECTED_POPIN' .
        l_new_col = cl_wd_table_column=>new_table_column(
                      id    = w_comp_tab-name
                      width = '100px' ).
        lr_header = cl_wd_caption=>new_caption( text = w_comp_tab-name ).
        IF w_comp_tab-name EQ 'PRODUCT_ID'.
**      link to action
          CONCATENATE w_comp_tab-name '_LINK' INTO l_link_id.
          lo_link_to_action = cl_wd_link_to_action=>new_link_to_action(
                               id   = l_link_id
                               text = 'PRODUCTID'
                          on_action = 'SET_POPIN'
          l_new_col->set_table_cell_editor( lo_link_to_action ).
          DATA: lr_el_details_cont TYPE REF TO if_wd_view_element.
          lr_container ?= lr_el_details_cont.
         Transparent container
          DATA lr_transparent_container TYPE REF TO cl_wd_transparent_container.
          DATA lr_table_in_table_popin TYPE REF TO cl_wd_table.
          lv_uielement_id = lv_uielement_id_prefix && '_POPIN_CNTR'. "#EC NOTEXT
          lr_transparent_container = cl_wd_transparent_container=>new_transparent_container(
              id                       =   lv_uielement_id "'TRANSPARENT_CONTAINER1'
              height                   = '100%'             "#EC NOTEXT
              width                    = '100%'
              accessibility_descr      = 'TRANS_ACC'
              is_layout_container      = 'X'         "#EC NOTEXT
              view                     = view
          DATA l_popin_layout TYPE REF TO cl_wd_matrix_layout.
          l_popin_layout = cl_wd_matrix_layout=>new_matrix_layout( container = lr_transparent_container ).
          lr_transparent_container->set_layout( l_popin_layout ).
         lr_container->add_child( the_child = lr_transparent_container ).
          DATA: l_item_node TYPE REF TO if_wd_context_node.
          l_item_node = l_node->get_child_node( 'SUB' ).
          l_popin = cl_wd_table_popin=>new_table_popin(
          id = 'POPIN'
          on_close = 'CLOSE_POPIN' ).
         DATA: i_the_content TYPE REF TO cl_wd_uielement.
         i_the_content ?= lr_transparent_container.
          IF l_item_node IS BOUND.
            cl_wd_dynamic_tool=>create_table_from_node(
                   EXPORTING ui_parent = lr_transparent_container
                             table_id = 'MULTIV_TAB'
                             node      = l_item_node
                   RECEIVING table     = lr_table_in_table_popin ).
          ENDIF.
          "Add the Transparent Container to the Table Popin
          l_popin->set_content( lr_transparent_container ).
          " add popin to column
          l_new_col->set_popin( l_popin ).
        ENDIF.
        l_new_col->set_header( lr_header ).
        " add column to table
        lr_table->add_column( l_new_col ).
      ENDIF.
    ENDLOOP.

Web dynpro screen with multiple rows with columns that can be edited

Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
Debbie

Hi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant

I have regisetred a EIT with multiple rows Yes, can we change it NO now.

I have registered a EIT with multiple rows Yes, can we change it NO now.

Hi,
Yes you can change this through back-end.
Register extra information (types) concurrent program run the package HR_REGISTER_EITS and insert definintion of an EIT in respective INFO_TYPES tabel for example if person EIT then definition is stored in PER_PEOPLE_INFO_TYPES.
In this table we have column MULTIPLE_OCCURENCES_FLAG which can have value as Y or N, Y - Multiple entries allowed, N - Multiple entries not allowed.
You need to update the value of this flag to N for your EIT definition and you are done.
Thanks,
Sanjay

"Scatter" Chart with Multiple Values per Date

APEX Gurus,
I need to plot a chart with multiple y-axis values along the x-axis.
Here's an example:
X-Axis (Date) Y-Axis (Number)
1-JAN-07 1
1-JAN-07 2
1-JAN-07 3
2-JAN-07 1
2-JAN-07 2
3-JAN-07 1
Right now, APEX displays the X-axis (Date) as separate values on the x-axis. But I want all three 1-JAN-07 values to line up vertically under x-axis. I am currently using a line chart for this. And it displays a "dot" for each value (depending on my max rows value).
Any insight would be much appreciated! And thanks in advance!
Susan

You can try using this charting tool for generating scatter charts:
http://htmldb.oracle.com/pls/otn/f?p=31517:58
Denes Kubicek

JTable with Multiple Row Header

well, Im do an application thats need formated ISOS Sheets, and most of them have a Table with Multiple Row Header , and Groupable Header, and both of them. I have the .java and in the class MultipleRowHeaderExample calls a class AttributiveCellTableModel for setColumnIdentifiers() and setDataVector() the cue is why this print stack :
Exception in thread "main" java.lang.StackOverflowError
     at java.util.Vector.<init>(Unknown Source)
     at java.util.Vector.<init>(Unknown Source)
     at jp.gr.java_conf.tame.swing.table.AttributiveCellTableModel.setDataVector(AttributiveCellTableModel.java:54)
     at javax.swing.table.DefaultTableModel.setColumnIdentifiers(Unknown Source)
     at jp.gr.java_conf.tame.swing.table.AttributiveCellTableModel.setDataVector(AttributiveCellTableModel.java:55)
     at javax.swing.table.DefaultTableModel.setColumnIdentifiers(Unknown Source)
     at jp.gr.java_conf.tame.swing.table.AttributiveCellTableModel.setDataVector(AttributiveCellTableModel.java:55)
     at javax.swing.table.DefaultTableModel.setColumnIdentifiers(Unknown Source)
     at jp.gr.java_conf.tame.swing.table.AttributiveCellTableModel.setDataVector(AttributiveCellTableModel.java:55)
     at javax.swing.table.DefaultTableModel.setColumnIdentifiers(Unknown Source)
     at jp.gr.java_conf.tame.swing.table.AttributiveCellTableModel.setDataVector(AttributiveCellTableModel.java:55)
     at javax.swing.table.DefaultTableModel.setColumnIdentifiers(Unknown Source)
     at jp.gr.java_conf.tame.swing.table.AttributiveCellTableModel.setDataVector(AttributiveCellTableModel.java:55)
     at javax.swing.table.DefaultTableModel.setColumnIdentifiers(Unknown Source)
     at jp.gr.java_conf.tame.swing.table.AttributiveCellTableModel.setDataVector(AttributiveCellTableModel.java:55)
     at javax.swing.table.DefaultTableModel.setColumnIdentifiers(Unknown Source)
.if in main class, have initialized the data, and column vars
public class MultipleRowHeaderExample extends JFrame {
Object[][] data;
Object[] column;
JTable table;
MultiSpanCellTable fixedTable;
public MultipleRowHeaderExample() {
    super( "Multiple Row Header Example" );
    setSize( 400, 150 );
    data = new Object[][]{
        {"SNo."    ,"" },
        {"Name"    ,"1"},
        {""        ,"2"},
        {"Language","1"},
        {""        ,"2"},
        {""        ,"3"}};
    column = new Object[]{"",""};
    AttributiveCellTableModel fixedModel = new AttributiveCellTableModel(data, column) {
      public boolean CellEditable(int row, int col) {
        return false;
    };

What's the code in AttributiveCellTableModel?
* (swing1.1beta3)
package jp.gr.java_conf.tame.swing.table;
import java.util.*;
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.event.*;
* @version 1.0 11/22/98
public class AttributiveCellTableModel extends DefaultTableModel {
protected CellAttribute cellAtt;
public AttributiveCellTableModel() {
    this((Vector)null, 0);
public AttributiveCellTableModel(int numRows, int numColumns) {
    Vector names = new Vector(numColumns);
    names.setSize(numColumns);
    setColumnIdentifiers(names);
    dataVector = new Vector();
    setNumRows(numRows);
    cellAtt = new DefaultCellAttribute(numRows,numColumns);
public AttributiveCellTableModel(Vector columnNames, int numRows) {
    setColumnIdentifiers(columnNames);
    dataVector = new Vector();
    setNumRows(numRows);
    cellAtt = new DefaultCellAttribute(numRows,columnNames.size());
public AttributiveCellTableModel(Object[] columnNames, int numRows) {
    this(convertToVector(columnNames), numRows);
public AttributiveCellTableModel(Vector data, Vector columnNames) {
    setDataVector(data, columnNames);
public AttributiveCellTableModel(Object[][] data, Object[] columnNames) {
    setDataVector(data, columnNames);
public void setDataVector(Vector newData, Vector columnNames) {
    if (newData == null)
      throw new IllegalArgumentException("setDataVector() - Null parameter");
    dataVector = new Vector();
    setColumnIdentifiers(columnNames);
    dataVector = newData;
    cellAtt = new DefaultCellAttribute(dataVector.size(),
                                       columnIdentifiers.size());
    newRowsAdded(new TableModelEvent(this, 0, getRowCount()-1,
           TableModelEvent.ALL_COLUMNS, TableModelEvent.INSERT));
@Override
public void setColumnIdentifiers(Vector arg0) {
          // TODO Auto-generated method stub
          super.setColumnIdentifiers(arg0);
public void addColumn(Object columnName, Vector columnData) {
    if (columnName == null)
      throw new IllegalArgumentException("addColumn() - null parameter");
    columnIdentifiers.addElement(columnName);
    int index = 0;
    Enumeration enumeration = dataVector.elements();
    while (enumeration.hasMoreElements()) {
      Object value;
      if ((columnData != null) && (index < columnData.size()))
       value = columnData.elementAt(index);
      else
     value = null;
      ((Vector)enumeration.nextElement()).addElement(value);
      index++;
    cellAtt.addColumn();
    fireTableStructureChanged();
public void addRow(Vector rowData) {
    Vector newData = null;
    if (rowData == null) {
      newData = new Vector(getColumnCount());
    else {
      rowData.setSize(getColumnCount());
    dataVector.addElement(newData);
    cellAtt.addRow();
    newRowsAdded(new TableModelEvent(this, getRowCount()-1, getRowCount()-1,
       TableModelEvent.ALL_COLUMNS, TableModelEvent.INSERT));
public void insertRow(int row, Vector rowData) {
    if (rowData == null) {
      rowData = new Vector(getColumnCount());
    else {
      rowData.setSize(getColumnCount());
    dataVector.insertElementAt(rowData, row);
    cellAtt.insertRow(row);
    newRowsAdded(new TableModelEvent(this, row, row,
       TableModelEvent.ALL_COLUMNS, TableModelEvent.INSERT));
public CellAttribute getCellAttribute() {
    return cellAtt;
public void setCellAttribute(CellAttribute newCellAtt) {
    int numColumns = getColumnCount();
    int numRows    = getRowCount();
    if ((newCellAtt.getSize().width != numColumns) ||
        (newCellAtt.getSize().height != numRows)) {
      newCellAtt.setSize(new Dimension(numRows, numColumns));
    cellAtt = newCellAtt;
    fireTableDataChanged();
public void changeCellAttribute(int row, int column, Object command) {
    cellAtt.changeAttribute(row, column, command);
public void changeCellAttribute(int[] rows, int[] columns, Object command) {
    cellAtt.changeAttribute(rows, columns, command);
}that's it

Reg : Concatenation of a column value with multiple rows... URGENT

Hello,
Could any of u help me in concatenating a column value with
multiple rows ???
For ex : I've the following data from emp table :
DEPTNO ENAME
10 KING'S
30 BLAKE
10 CLARK
10 TOM JONES
30 ALLEN
30 JAMES
20 SMITH
20 SCOTT
20 MILLER
10 MILLER
20 rajeev
I want the following output :
deptno Concat_value
10 KING'S,CLARK,TOM JONES,MILLER
20 Rajeev,MILLER,SMITH,SCOTT
30 BLAKE,ALLEN,JAMES
Thanks in Advance,
Srini

Hello Naveen,
Thanks for ur answer. But I need a single SQL query for getting
what I want. I know the solution in PL/SQL.
Please try it in a single SQL....
Thanks again,
Srini

Is it currently possible to create a doughnut chart with multiple concentric circles in SSRS?

Is there currently any way to create a 'doughnut' chart with multiple concentric circles in an SSRS report (any version), without using 3rd party tools?
Something like this, perhaps?
(For that matter is it possible to create this using JavaScript? It's my understanding that this image was originally created in a web app using JavaScript. So far I've not been able to pin down the details. I've found hints that JavaScript
can be used in SSRS reports but so far no clear working examples.)

Hi B.Chernick,
According to your description, you want to create a create a doughnut chart with multiple concentric circles in your report. Right?
In Reporting Services, we only have doughnut chart with one concentric circle. All the category group is in that concentric circle. Though we can embed javascript injection in expression, it only give the css style to values or report
items which can change the looking. It can't change the structure of the report items itself. So your requirement can't be achieved current.
For your requirement, we suggest you provide Microsoft a feature request at
https://connect.microsoft.com/SQLServer
so that we may try to expand the product features based on your needs.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Making Charts with Multiple Rows in Tables

Similar Messages

Maybe you are looking for