Making date of production field display as well as accept .

Dear cons
we want to make date of production as display while doing Migo with refernce to P.O. Also we want to make entry the same while doing MIGO W.R.T. Outbound delivery. We know the seting of display. but for others how it will work.any enhancement is necessary for it. if yes, what is the badi.

Hi,
You can set date of production (GOITEM-HSDAT) as 'display' in MIGO through the OMJX transaction.
If you would like to manipulate the subscreens you should use BADI 'MB_MIGO_BADI'.
I hope this information helps you.
Kind Regards,
Fábio Almeida
MM Consultant

Similar Messages

PO - GL Account Field - display only

Hi,
Please could you advise on the options for making G/L Account field display only in ME21n?
I think there are probably a few ways of doing it which I am investigating, but would like your opinion and advice if possible.
Thanks in advance.
As always - points up for grabs!

Hi,
Hope you are doing cost center accouting with account assignment K while creating PO
Then go to MM --> Purchasing --> Account assignment --> Maintain account assignment category _-> Select cost center K --> Change view account assignment details you can
make G L account as mand or optional or display or hidden.
Check this out please if it helps you.
Best regards,
Sridhar

Data carrier & application field are not getting displayed in CV04N

Hi Guru's
In TCode : CV04N, data carrier & application field are not getting displayed.
While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
Let me know is there any configuration that has been missed out.
Regards
Bhanu

Hi Bhanu,
Please note that the fields 'Data carrier' & 'Application field' are visible only if no document type is entered.
Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
Regards,
Pradeepkumar Haragoldavar

Value in data type p field not displayed properly when download to UNIX

Hi,
One of my programs downloads a file to UNIX server,
here the data which i am downloading, one of the fields is of type P (it is of domain type DEC).
The field displays very strangecharactershen i view it in UNIX server.
I am using OPEN DATASET in binary mode statement.
my system is unicode enabled ECC6.0 version
Please help

That is normal, type "P" packed fields with two decimal digits packed into each byte Use another type of field, if you want the field to be readable..
Look at [Predefined ABAP Types|http://help.sap.com/erp2005_ehp_03/helpdata/EN/fc/eb2fd9358411d1829f0000e829fbfe/frameset.htm]
Regards

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Short dump while displaying cube data in production

Hi Folks,
I'm getting a short dump while displaying cube data in production, please suggest
Thanks and Regards
Santhosh

Hi Santosh,
I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
cheers
m./

Custom infotype - issues with conversion class - making fields display only

Hi,
I created the custom infotype 9008 using t-code PM01, created conversion class ZCL_HRPA_UI_CONVERT_9008_XX and assigned it to screen structure ZHCMT_BSP_PA_XX_R9008 in the view V_T588UICONVCLAS. Coded the methods IF_HRPA_UI_CONVERT_STANDARDOUTPUT_CONVERSION and IF_HRPA_UI_CONVERT_STANDARDINPUT_CONVERSION. I'm trying to make some fields display only within the method OUTPUT_CONVERSION dynamically. Coded the check class ZCL_HRPA_INFOTYPE_9008 with business logic.
Everything seems to be working fine when I test using the test tool through t-code PUIT_UI.
When I try to create/modify 9008 record through PA30, the code in the methods OUTPUT_CONVERSION and INPUT_CONVERSION is never getting executed. The control is not coming there at all. The fields are allowing input. Any idea why this is happening.
We are on ECC 6.0 and at service pack level SAPKE60035. Couldn't find any relevant SAP notes as well. Appreciate your help in this regard.
Thanks,
Kumar.

Hi Venkata,
Check this document.
This explains about custom infotype creation.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1?overridelayout=true
regards,
Brinda L

How to make "Data Entry Profile" field input unable or display only in CAT2

hi ,
I have requiremnet where I need to make "Data Entry Profile" field in the CAT2 transaction as Display only .That is for each user it should come as default one .
The reason behind this is , user should not change this Profile and maintain an incorrect timesheet entries.
Is there any User exit where i can do this ?
Let me know as this is very urgent requirement.
Points will be definately rewarded.
Thanks .

Hemant,
Got SHD0 transaction and create screen variant for that transaction there you can disable that field.
Create Transaction variant for that transaction and assign previously created screen variant to this transaction varient. actiavte.
Reward if it helps,
Satish

Adding extra fields to the Product search display

Hi all,
I have a requirement where the std Product search needs to be modified wherein i need to add a price field for some materials whcih i will maintain in a Z table(custom table for the materials and its price).
Now my problem is that the o/p structure is taking the fields from the view BBPV_F4PR_GEN (where i dont have nay price field!)...When i pass my structure to the Dispaly FM "F4UT_RESULTS_MAP" it doesnt consider my custom structure for display....
is it possible to change the o/p structure for the Product search display???Has anybody tried thsi before???
Any help is appreciated.
Thanks & regards,
Disha.

AFAIK, the only way to do this is to write a system modifcation.
The BADI is executed only once at startup of the session, so that makes it merely static. (A strange point in time, I discussed it with SAP and they just shook their heads)
I had the same problem with some other F4-Helps and it was a big hazzle. From my experience, no straight answer.

Problem with Refreshing the data bound text fields

Folks,
First of all, this a GREAT product and I am moving my apps from Eclipse to Studio Creator. I am very impessed with it so far.
I am gone through most tutorials, but can't help resolve the problem that I am having. I have a page, that lists all the users in a table. When you click on any user, it opens up another page that lists the detail of the specific user you have clicked on. This a typical use in most web applications, right?
In the user detail page, I open it in "Read" only mode, by setting the "setReadOnly" to true for all text field components. Then users can edit it by clicking "Edit" button. Edit button just changes the "setReadOnly" to false, to allow editing. After editing, they can hit the "Save" button to save the changes. In the save button, I call this code:
public void prerender() {
        try {
            userID=getSessionBean1().getUserID();
            getSessionBean1().getWeb_userRowSetUserDetail().setObject(1,userID);
            getWeb_userDataProviderUserDetail().refresh();
            info("prerender: Refresh called");
        } catch (Exception ex) {
            error("Error in userForm.prerender():"+ex.getMessage()+ex.getStackTrace());
            log("Error in userForm.prerender():", ex);
        setReadWrite();
public String btnSave_action() {
        try {
            getWeb_userDataProviderUserDetail().commitChanges();
            getWeb_userDataProviderUserDetail().refresh();
            info("Data Provider Refreshed in SAVE");
            _readOnly=true;
            form1.discardSubmittedValues("saveVForm");
            info("User Updated New:"+userID);
        } catch (Exception ex) {
            log("Error Description", ex);
        return null;
    public String btnEdit_action() {
        try {
            _readOnly=false;
            //info("User ID Edt="+getSessionBean1().getUserID());
        } catch (Exception ex) {
            error("Error in userForm.btnEdit_action:"+ex.getMessage()+ex.getStackTrace());
            log("Error in userForm.btnEdit_action():", ex);
        return null;
    private void setReadWrite(){
        // Set read-only to true or false for all text fiels
        this.btnEdit.setVisible(_readOnly);
        this.btnSave.setVisible(!_readOnly);
        this.user_id.setReadOnly(_readOnly);
        this.user_email_client.setReadOnly(_readOnly);
        this.user_email_office.setReadOnly(_readOnly);
        this.user_fname.setReadOnly(_readOnly);
        this.user_lname.setReadOnly(_readOnly);
        this.user_id.setReadOnly(_readOnly);
        this.user_password.setReadOnly(_readOnly);
        this.user_password_conf.setReadOnly(_readOnly);
        this.user_phone_cell.setReadOnly(_readOnly);
        this.user_phone_cell_aac.setReadOnly(_readOnly);
        this.user_phone_client.setReadOnly(_readOnly);
        this.user_phone_home.setReadOnly(_readOnly);
        this.user_phone_office.setReadOnly(_readOnly);
    }When the save button is clicked, the database is updated (as I can verify by looking directly into the database), but the data-bound text fields do not display the new value. YES, I am calling refresh() on data provider? I tried to call refresh in both "preRender()" and "Save" button action event, but that did not help either.
Please note that the save button also changes the "setReadOnly" back to TRUE for all text fields. That means, users view the page in Read-Only mode after saving. (They have to click on "Edit" button again to edit it). I discovered that if I do not set the text field components in "ReadOnly" mode, then they display the updated value of the fields. But if I change setReadOnly to TRUE, then they display the old values (before the save).
Any idea what I am doing wrong here?
Thanks

Here is my experience with it. I have three text
boxes to be filled out. They are part of a virtual
form with an add button as the submit. You can fill
out the 3 and add them and a node is added to a tree
component. When you click on a node in the tree
component (the submit to another virtual form that
the 3 buttons participate in) the text fields should
be loaded with the values that they where added with.Hard to tell from this explanation, but if the text fields do not participate in a virtual form, then they are not going to get updated when an action in the virtual form happens. Not sure this is your problem. Like I say, hard to tell from this explanation.
They will not display the values though...having
nothing to do with read only. If I disable them
before hand...they display the updated values. If I
set their value at the top or bottom of prerender,
they display the change...if I set the value in an if
conditional that is hit (I have checked many times)
in prerender, they will not display the values. If I
set them in the tree handler anywhere, they will not
display the values. This is very frustrating and is
wasting tons of my time...I simply want to load the
text fields based on the tree node that was
clicked...I have messed with this for hours and it
certainly does not work.Well, setting them in the tree handler won't work because the tree handler gets called in the page instance that handles the submit and not the page instance that renders the response.
Posting your prerender code might help. Also, your action handler.
>
>
- Mark

How to get the finished date of production order

hi guys
now i want to get the finished date of production date. when i search in the table afko , i found the field GLTRI is '0000.00.00'.
BUT IN the production order display view , the confirm date is '2007.1.1'. so how can i get the confirm date with the production order number? thanks.

For costing report, you have to read the following tables: based on material Qty/value/ Machine rate and machine posting date , machine rate ( T-code kp26) and also types of material Raw, finished and semi finished ..
AFRU ,AFPO,AFKO,AFVV,AFVC,CAUFV FOR PRODUCTION ORDER.
For material calculation MARA, MSEG and MKPF as well as MAKT...
Hope thisll help you .
Thanks

BAPI_GOODSMVT_CREATE error: Enter the date of production.

Hi,
Referring to the subject, I am getting error when i try to use BAPI_GOODSMVT_CREATE to do "Goods Receipts for Prod Order".
The error is asking me to "Enter the date of production".
GM_CODE has been assigned to 02. Posting date and doc date are set to local date.
As for the GOODSMVT_ITEM parameter, I am passing in plant, storage loc, quantity, movement type, batch no, delivery note, CO production order, movement indicator and propose quantities.
Anyone encounter this error before? Please share your experience and perhaps the solution.
Thanks.

hi
give production date which is in the line of item
and if u dont want to do that and u have rights to change in spro then plz do folloing
go to OMJX there u will find field prod date just make it display
reward if useful
regards
kunal

Data into various fields in a PDF Form

Hi,
I don't know whether this is the right place but I have been trying to figure out how to get different a field to change depending on the input of a different field. For example, the price price field being altered when the product field is changed. Similar to the 'if' formaula in an Excel Spreadsheet.
Also, what is the maximum number of data fields you can have in a drop down box as I can not get more than 20?
Thanks!!
J

Bingo!
Cheers for that George - I didn't know about that option - I'd been everywhere in the field and tab order and been wracking my brain over the calculations - Sum(+) and Product(x) fields - I'd just assumed that the total given that it was the Sum(+) of 14 values would always be well... the total?
Anyhow thanks for that.

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Issue with length of delivery field displayed in LM06 on RF device

Hello everyone,
I have a challenging issue which I have posted on another forum as well, and was hoping that somebody on SDN may be familiar with this. This issue is being reported by one of our warehouses. SAP RF transaction LM06 is used extensively in this warehouse, and we use a 10 digit delivery number. The delivery field itself in SAP is 20 characters, and we have always displayed 10 on RF. The warehouse is telling me that about a week ago, the number of characters displayed on the RF device for the delivery field in LM06 changed from 10 to 9, and that a leading zero was being inserted when the barcoded delivery number was scanned. There have been no changes to the barcode on the picklist, and I am told there have been no changes to the printer that prints the pick list. A change was deployed a week ago that contained some unrelated configuration and a small code change in a user exit for transfer order creation. Neither of these is in any way related to LM06. Our basis team tells me that there have been no changes to the SAP console server, but I have no way to verify that myself as I am a WM functional consultant. Can anybody tell me if they have seen a problem like this before, or if the field display for a transaction like this is configurable in the SAP console server? The RF hardware being used is the Symbol PDT-8146. Unfortunately, I am 10,000 miles from the warehouse, which puts me at a bit of a disadvantage in trying to diagnose this.

Thank you both for the good feedback. I have also gotten some useful feedback from my posting on ittoolbox, and have forwarded all of the responses to a colleague who is located at the site where the warehouse is located. I will provide feedback once my colleague has had a chance to investigate further based upon the suggestions that I have received.

Making date of production field display as well as accept .

Similar Messages

Maybe you are looking for