Making sure a button does not get focussed

Hey there
I'm currently building a small search banner which comprises of three fields and a search button.
The banner works great and all the fields respond well however if I use the tab key on the keyboard to move from one field to the next the search button becomes highlighted.
At this point my keydown Enter causes the button to not function as a release but instead takes my file to another portion that is reserved for button B rollover functionality.
Is there anyway I can make sure that by hitting the tab key after the last field will take the user back to the first field?
Thanks very much

Thanks kglad
if the search button is srch_btn and the first field is name
would it be something like?
srch_btn.onSetFocus = function ()
name.onSetFocus ();
thanks!

Similar Messages

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

I have never seen it but then I run SL which is much more reliable than Lion..
See
http://pondini.org/TM/E4.html
Check the master guru of all TM problems.

Custom ribbon button does not show for a Tasks list

I created a simple app using Visual Studio 2012 to add a custom ribbon button for a tasks list. After deploying the app to the SharePoint online, the button does not appear on the ribbon. The exact same button gets displayed properly
when added to the ribbon for a custom list. The elements file with the location of the button gets generated, so I can't imagine it would be wrong, but just in case, this is what I have:
<CustomAction Location="CommandUI.Ribbon"....
<CommandUIDefinition Location="Ribbon.ListItem.Actions.Controls._children">...
Any help is greatly appreciated.
One more thing, if I add this button using SharePoint Designer 2013, the button does not get displayed either. I have a feeling it might be problem with the Tasks list?
Thanks

Hi Danny,
The button needs to be displayed only for one specific list. And as I mentioned, the elements file for the ribbon button was generated by VS, here is the content:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction Id="02aa4c3b-bb73-4dfa-989c-d63a9591dcee.RibbonCustomAction" RegistrationType="List" RegistrationId="{$ListId:Lists/Projects;}" Location="CommandUI.Ribbon" Sequence="10001" Title="Create Project Site">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.ListItem.Actions.Controls._children">
<Button Id="Ribbon.ListItem.Actions.RibbonCustomActionButton" Alt="Create Project Site" Sequence="100" Command="Invoke_RibbonCustomActionButtonRequest" LabelText="Create Project Site" TemplateAlias="o1" Image32by32="_layouts/15/images/placeholder32x32.png" Image16by16="_layouts/15/images/placeholder16x16.png" />
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler Command="Invoke_RibbonCustomActionButtonRequest" CommandAction="~remoteAppUrl/Pages/Default.aspx?{StandardTokens}&SPListItemId={ItemId}&SPListId={ListId}"/>
</CommandUIHandlers>
</CommandUIExtension >
</CustomAction>
</Elements>
If the same button is added for a custom (not a Tasks) list, the button shows up fine.
Thanks

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD

HT202667 The "edit" button does not pop up next to my Apple ID and Primary Email Address

The "edit" button does not pop up next to my Apple ID and Primary Email Address. I want to change my address because its an old @mac.com address and I want to update it with my @gmail.com. I'm guessing this is an apple support question, but I would like to just get it fixed.

Just making sure we are comparing Apples to apples, so to speak.
If this is NOT what you see at My Apple ID - then Apple ID: Contacting Apple for help with Apple ID account security
It seems that for SOME folks it takes contact with a live person at Apple - can't explain why though. One person replied that after contacting Apple, they were instructed to email [email protected] with old and new. I never heard back if that was successful or not - just that the email was instructed.
ÇÇÇ

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

Button does not respond (with attachment)

Hi,
I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
I attach the program for you to look at.
Any help/hints much appreciated.
Thanks,
Dave.
Attachments:
MouseCoordinatesForPW.vi ‏178 KB

altenbach wrote:
Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
Message Edited by altenbach on 05-22-2007 09:23 AM
Hi, thanks for your reply.
The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
"Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
- The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
"Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
"Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
- No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
- Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
"Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
- I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
Thanks,
Dave.

HT4053 How do I delete photos, the delete button does not appear to be working?

I have downloaded all my photos to my new IPad. I need to delete some I do not want, how do I do it. The delete button does not appear to be working?

I personally don't know of any other software that does syncing, however, you can use another cloud service like Dropbox or Flikr to house your photos, add and delete them and have them available for viewing on any device or comuter that has an internet connection.
I'm not sure why you would be having trouble not getting photos that you put into your Photo Stream Uploads folder on your iPad. Photo Stream is Photo Stream. Also, just so you know, photo management and Photo Stream have nothing to do with iTunes. Photo management on the computer is done through your photos folder and app (on a Mac, it's iPhoto). You only use iTunes to tell the sync process which items to retrieve and sync from that library. Photo Stream is completely independent of iTunes altogether.
If you want to get photos from a camera to your iPad without having to use a computer, get a camera connection kit which will allow you to physically hook the camera to the iPad, and to directly download the photos from the camera to the iPad.
You would still want to also hook the camera up to the computer to back those photos up to your photo library on your computer.
Also you might want to look into purchasing (for under $5) iPhoto for your iPad:
https://itunes.apple.com/us/app/iphoto/id497786065?mt=8
Seems like you might benefit from talking to your local Apple Store about when they might have some sessions for learning photo management and sharing between your device and computer, because what you appear to be wanting to do is all do-able. I guess I'm just missing what your issue is. You can many things with photos on your iPad, however, your device will never be a substitue for your computer for backing up and managing your photos.
So, best of luck, I hope one of the suggestions above will help you to achieve what you are trying to do.
Cheers,
GB

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

The back button does not work consistently, and rarely works if I open an attachment...any ideas on fixing this?

The back button does not work consistently, and rarely if ever when I open an attachment. Does anyone have a fix for this?
== This happened ==
Not sure how often
== I installed firefox

Same problem here: I never had a problem with the previous versions and now I don't even get my homepage when I click Firefox. Instead, I am getting a blank screen that says "New Tab", only after I click the "Home" symbol I get my Homepage (Yahoo). The browser - back and browser forward button don't work anymore, very annoying. Normally a newer version should be an improvement but it looks like Mozilla really messed up with this "improvement". probably I am going to use Google chrome from now on.

IPhone 4S does not get detected in Windows 7

iPhone 4S does not get detected in Windows 7
When I connect my iPhone 4S to my computer, iTunes does not detect it. iPhone pops the message of USB connectivity and defaults to Mass Storage. Windows shows the message that "Device is ready to use" and I can read both drives of the iPhone in Windows Explorer. However iTunes does not detect the device and the "Devices" tab does not appear. I have tried Restarting the phone. Restarting the computer. Connecting the phone to a different computer. (I'm on version 4.3.3 (8J2), firmware 01.59.00 and iTunes 10.5.3.3).

First make sure you usb drivers are up to date
http://windows.microsoft.com/en-CA/windows-vista/Tips-for-solving-problems-with- USB-devices
Try a hard reset on your iPhone, press the power/sleep & home button at the same time until the apple logo appears (ignore the slide to turn off prompt). Once the apple logo appears release the buttons and wait for your iPhone to boot back up then try connecting. Also try a different USB cable if you have one available.

I cannot send a reply in imessages. The blue send button does not work

I am using an Ipad. I cannot reply to a message in imessage. The blue button does not work anymore.

Do you still have a BitDefender directory in program folders, usual location is C:\Program Files\BitDefender\
If the directory still exists, the uninstall did not complete fully. BitDefender recommend downloading the uninstaller and running it again. You can get the uninstaller from http://www.bitdefender.com/uninstall
If that does not work, you can try manually removing the toolbar. Do you have a folder called C:\Program Files\BitDefender\BitDefender 2009\FFToolbar
The "BitDefender 2009" part will vary depending on the version of BitDefender installed. If that still exists try deleting the contents of the FFToolbar folder.
BitDefender is likely to have added an entry to the Windows Registry, if you are happy with editing the registry you can remove the entry, for details see the "Windows registry extension" section of http://kb.mozillazine.org/Uninstalling_add-ons
'''Warning: Only edit the registry if you know what you are doing, making an error in the registry can cause serious problems with Windows, it may even prevent Windows from starting.'''

Browser Go button / "More" button does not work

Within the browser the Browser Go button / "More" button does not work
When I tap it the highlight appears above it... but nothing happens.
I upgraded the OS today and that didn't fix the problem.
I have to use google to browse to a different url... incredibly frustrating... solution?
With further testing I've found that if I load a new tab nothing happens... if I then reselect that new blank tab I can then enter in one url of my choosing and it will load... after that the tab from a Go button stance is dead again. No matter what I do I can get the 'three button' more button to work.
Help Please!
Tudor

Hey tudorwhiteley,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Does this happen to all websites? Also what version of BlackBerry 10 are you currently running? This can be found by going to Settings>About.
If you remove the battery and place it back in and then access the browser, are you able to replicate the issue?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Hp 2711x control button does not work.

I have recieved my Hp 2711x. After following instruction to turn it on, I cannot use any button on Front Panel Controls. Even the power button is not doing anything. To turn off the monitor, I have to pull the power cord.
Could someone help me, what is going on with the control buttons on my new monitor?

>> When that happens, I remove the power connection from the back of the monitor and immediately reconnect it.
> Doesn't your power button work, too?
> Else I would just switch it off and on again - it's better for the electrical components!
Happens only rarely, but when it does, using the switch to turn off and on the monitor does not get a picture on the up and running pc. Turning it on that way only gets it to repeat the on screen display than no signal is detected for any of the video connections. I could perhaps power off the monitor's switch before disconnecting and reconnecting power from back. Will try that if and when it happens again. I should mention when the DVI digital signal is not getting detected, swapping to a VGA cable works fine (i.e., gets an analog picture). But the digital signal is not restored by swapping back to the DVI cable. Only pulling the plug on the monitor has consistently gotten detection of the digital signal restored. I don't have HDMI output on my PC so don't know for sure if the monitor would have similar issues on HDMI.

Open Task Button does not come in Outlook

I have a three level approval workflow in which each level an email is generated to the approve to approve or reject.
But suddenly the Open Task Button does not pop up in Outlook 2010 anymore can you tell me why?
Srinivasan Kidambi

had the same issue with External users not using Outlook. This is how I fixed it:
Open the task list that the workflow is using and connect it to Outlook. Then kick off a workflow to make a new task. Once the task is made open the task from Outlook. The bottom options (review, perform the specific req. for the task, and Open this task)
are now links. Hover your mouse over the link and you will see the address.
Now open SPD, connect to your site and open the work flow assc. to the doc lib.
Start editing the workflow and click the "Approval" link
Click "Change the behavior of a single task"
You are going to have to look for all the instances of "then e-mail task notification to "Current Task:Assigned to"
Open "Current Task:Assigned to"
Click where you want he link to go and hit the Hyperlink button
name the link whatever you want, then hit the string builder ("..." button)
Copy the link from the Task in Outlook into the string builder (if you use External addressing you can also hard code the External address).
At the very end of the link where is says ID=(then a number) delete the number and DO NOT put a space. Click the Add or Change Lookup button and use "Current Task: Approval" "ID" "As String" and click ok. Should like this:
Now this will not pop the form up, but it will send the user straight to the task form (might have to enter username and password) for the correct task. Remember to do this to all the "Current Task:Assigned to" in the workflow. It sounds like a chuck of
work but it does not really take thaty long on the OOTB Approval workflow.
Just wanted wanted to add my two cents.
Also check
http://social.technet.microsoft.com/Forums/en-US/417466a3-cdcb-4559-8453-9fff6da4aceb/getting-around-a-missing-open-this-task-button-in-a-nonoutlook-email?forum=sharepointcustomizationprevious
If this helped you resolve your issue, please mark it Answered

Making sure a button does not get focussed

Similar Messages

Maybe you are looking for