Hp 2711x control button does not work.

I have recieved my Hp 2711x.  After following instruction to turn it on, I cannot use any button on Front Panel Controls.  Even the power button is not doing anything.  To turn off the monitor, I have to pull the power cord.
Could someone help me, what is going on with the control buttons on my new monitor?

>> When that happens, I remove the power connection from the back of the monitor and immediately reconnect it.
> Doesn't your power button work, too?
> Else I would just switch it off and on again - it's better for the electrical components!
Happens only rarely, but when it does, using the switch to turn off and on the monitor does not get a picture on the up and running pc. Turning it on that way only gets it to repeat  the on screen display than no signal is detected for any of the video connections. I could perhaps power off the monitor's switch before disconnecting and reconnecting power from back. Will try that if and when it happens again. I should mention when the DVI digital signal is not getting detected, swapping to a VGA cable works fine (i.e., gets an analog picture). But the digital signal is not restored by swapping back to the DVI cable. Only pulling the plug on the monitor has consistently gotten detection of the digital signal restored. I don't have HDMI output on my PC so don't know for sure if the monitor would have similar issues on HDMI.

Similar Messages

  • Volume control button does not work as it should on Satellite P

    Hello.
    I rotate the button that controls the volume and i realise that it doesnt follow me!!
    I increase the volume and it decreases it and with strange irregular way (very shortly)...
    I decrease the volume and even it does it or it does nothing!!!
    Can someone help me with that??

    What notebook model do you have?
    Ive got a U400 and Ive got the same volume control.
    I read here in the forum about very similar issue and the guy solved this by cleaning the contacts.
    There was a dirt and dust which affected the volume control functionality.
    The volume control level jumped around.
    I dont know how he did this but I think a compressed air spray should help you.

  • Satellite P20: Fn+F5 and TV-button does not work

    Satellite P20, Windows XP SP2 keyboard problem.
    When I press Fn + F5, the computer does not show as earlier the different display options. TV button does not work also. I can change the different displays with my nVidia Display Driver.
    My keyboard is OK, there is no dust or fluids. I have newest BIOS update and Windows XP Service Pack 2. What program controls the keyboard functions in this case?
    How to repair this problem?

    Hello
    Obviously you have removed something or preinstalled your own operating system. Without Toshiba designed tools and utilities it will not work. I dont know exactly which of them are for doing this but please try to install Dritek Easy Button Util. /Sticky Keys V1.008, E-Keys Utilities and Toshiba Hotkey Utility.
    I hope it will help. If not please write again.

  • Froze on black screen and power button does not work

    my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
    any suggestions would be appreciated

    - iOS: Not responding or does not turn on
    Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reloading software and reset to original factory settings.

    My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reseting to original settings and reset the operating software.  Any ideas?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Windows 8.1 - Upgrade from 8, Start Button Does Not Work

    I cannot find a fix for my 8.1 start button.
    It works when I move the task bar to the top, right or left but not at the bottom. I ran all windows updates and there are no missing/unknown drivers in device manager. No errors in the event log. I've restarted multiple times and created a new local profile.
    I've also tried: 
    Copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
    dism /online /cleanup-image /restorehealth
    Any ideas? I would prefer not to do a clean install. Thanks in advance. 
    HP Touchsmart 23 series
    i5-3475S 2.90GHz
    16GB RAM
    1TB HDD

    Could you please describe a little more detailed about “Start Button does not work”? What is the symptom?
    Yes, when the taskbar is at the bottom of the screen, I cannot left click on the start button. The machine is also a touch-screen, which does work when I touch the start button. If I move the task bar to the left, right or top; the start button does work.
    And what is the kind of the account, Domain? Local? Or both?
    This is local machine.
    It still doesn’t work in a new account?
    Same issue happens with a new account.
    What happens if you use win + "X"?
    Win + "X" works fine; displays options.
    Regarding to the “doesn’t work, both for screen touch and mouse?
    Left-click via the mouse does not work. Touch works fine.
    Can you try to copy the WinX folder from a working PC to your PC for a test?
    I do not have another Windows 8.1 machine available to me.

  • HT1430 How can you restart your iphone if your lock button does not work?

    How can you restart or turn off your iPhone if the lock button does not work?

    The best way is to let the battery die. Or you can reset the phone settings which restarts everything.

  • Ipad 2 Print button does not work after 6 upgrade?

    Since we upgraded to iOS6, our print button does not work and does not find our printer.  It was working fine until iOS6.  Called an Apple Technician and he had me reset, which wiped out all of my saved information but didn't fix the print.  He then started talking about a restore but the phone line went dead.  Has anyone had this problem?

    Today's iOS 6.1 update fixed the printer problem.

  • My ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    Get it fixed then, make an appointment with the Apple genius bar.

  • My back and forward buttons do not work also the refreash button does not work, I have reloaded the latest version of fire fox and that did not help. HELP please.

    My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • I just updated firefox and now when i play online games ,my home button and my login in button does not work,also my refresh button is gone. Please help me with this problem. THANKS

    i updated firefox to the newest version,now my login and home button does not work,also my refresh button dissapeared. I play alot of games and need those buttons to switch back and forth to other games. THANKS

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • HT1212 what if your home button does not work to try to fix the connect to itunes problem?

    How do you diable your locked i pod touch using itunes if your home button does not work?

    Use one of these programs to place the iPod in recovery node:
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    The Firmware Umbrella - TinyUmbrella

  • Control-clicking does not work in Finder

    Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
    Any idea on how to fix this? Thanks a lot!
    David
    Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.

    David,
    Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
    If so you may be able to uninstall/reinstall the associated application.
    You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
    ;~)

  • The power button does not work

    i recently noticed that my original iphone power button does not work i push but nothing happens. I know that i have to fix but the problems is that the warranty is been over for long i need to know a good place to repair because the apple people said they could not fix it. I live in Texas so somewhere close would be nice.

    This link is for one 3rd party repair service you can contact for the first generation iPhone and for the iPhone 3G, which is located in Dallas.
    http://www.drcellphone.com/iphone-repair-service.php
    http://www.drcellphone.com/iphone2g.php

  • The back button does not work consistently, and rarely works if I open an attachment...any ideas on fixing this?

    The back button does not work consistently, and rarely if ever when I open an attachment. Does anyone have a fix for this?
    == This happened ==
    Not sure how often
    == I installed firefox

    Same problem here: I never had a problem with the previous versions and now I don't even get my homepage when I click Firefox. Instead, I am getting a blank screen that says "New Tab", only after I click the "Home" symbol I get my Homepage (Yahoo). The browser - back and browser forward button don't work anymore, very annoying. Normally a newer version should be an improvement but it looks like Mozilla really messed up with this "improvement". probably I am going to use Google chrome from now on.

Maybe you are looking for

  • How does 'Multiple Calendar Option' work in 7.9.6

    Friends, Could some one please explain me what this 'Multiple Calendar' option is, in 7.9.6. There is not much Information in Config guide with this regard. My Question is, does 'Multiple Calendar option' means 7.9.6 supports different calendars but

  • How to set Dynamic Time Series in Planning application

    Dear All, I am having an issue by setting up dynamic time series (Y-T-D). I have set up at generation level 4. In our application the hierarchy of dimension Period is as follows. Yeartotal -> HY1 -> Q1 -> Jan, Feb, Mar Consider the following example

  • Failure to launch

    my iphone 4 will not turn on. It is fully charged. Have tried doing the home and on button reboot without luck. When connected to my imac it shows the apple logo for ten seconds, goes black for ten seconds and continues that routine. When plugged in

  • Can't share screen using messages and ichat

    when i connect i can see my buddy and he can see me, but when i attempt to share his screen i get a white box across my screen and i can see his cursor moving but that is all i see. I had him ask to share my screen, which we did and he could see my s

  • Query in Web Generator, plus other stuff

    Hi, In a Web Server app I need to be able to accept input from the user then - based on this input-restrict the rows returned in the query form. Suggestion on how to do this?? Also, again based on the input from the user, I need to display (only) som